1972 Chevrolet Nova Engine Mounts
More 1972 Chevrolet Nova Engine Mounts
Find your specific 1972 Chevrolet Nova original or aftermarket Engine Mounts below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 1972 Chevrolet Nova Engine Mounts
KAI – Engine Mount Bracket (Part No.GMK402033569L)
from
$24.99
New Goodmark Driver Side Engine Mount Bracket, 302/350 Engine, Also Fits 1969 And 1972 Nova V8 350, Made Of Steel
Product Features:
See More
Product Features:
- 302/350 Engine Also Fits 1969 And 1972 Nova V8 350 Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Engine Mount Bracket (Part No.GMK402033567R)
from
$24.99
New Goodmark Passenger Side Engine Mount Bracket, 67-69 Camaro V8 Single Barrel Except With 1969 302/350 Engine, Made Of Steel
Product Features:
See More
Product Features:
- 67-69 Camaro V8 Single Barrel Except With 1969 302/350 Engine Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Engine Mount Bracket (Part No.GMK4020335694P)
from
$84.99
New Goodmark Driver And Passenger Side Pair Of Engine Mount Brackets, For Models With Big Block V8, Made Of Steel
Product Features:
See More
Product Features:
- For Models With Big Block V8 Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Engine Mount Bracket (Part No.GMK402033569R)
from
$24.99
New Goodmark Passenger Side Engine Mount Bracket, 302/350 Engine, Also Fits 1969 And 1972 Nova V8 350, Made Of Steel
Product Features:
See More
Product Features:
- 302/350 Engine Also Fits 1969 And 1972 Nova V8 350 Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Energy Suspension – MotorMt (Part No.3.1149G)
from
$279.99
MotorMt
Anchor – Engine Mount: Front Right, Front Left, 1 Piece (Part No.2267)
from
$11.79
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to CHEV 57-73; GMC 71-73; PONT 71-72;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
- MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
- HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
- SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
- HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
- For Years: 1957-1973
- Weight approx: 2 Lbs
- WITH INTERLOCK
- PART GROUP: 2267, 2267
Energy Suspension – Motor and Transmission Mount (Part No.3.1133G)
from
$239.99
Product Features:
See More
- Re-Engineered to Handle High Horsepower
- Outlasts Rubber
- Virtually Indestructible
Energy Suspension – MotorMt (Part No.3.1147R)
from
$272.99
MotorMt
Energy Suspension – MotorMt (Part No.3.1147G)
from
$272.99
MotorMt
Energy Suspension – Motor and Transmission Mount (Part No.3.1120R)
from
$147.99
Product Features:
See More
- Re-Engineered to Handle High Horsepower
- Outlasts Rubber
- Virtually Indestructible
Energy Suspension – Motor Mount (Part No.3.1117R)
from
$61.99
A true performance application component for cars, trucks, hot rods and racing/competition vehicles – yet designed to be also used for street vehicles. Soft-running enough to absorb vibrations for street use yet rugged for racing use. When required- a torque resistant safety interlock design is used that is comparable in strength to those too hard-running metal mounts. Replaces the original, short lived and typically too-soft rubber mounts and outdates those hard-running metal motor mounts. The popular early style mounts for General Motors vehicles are available in either zinc or chrome metal finishes. Made of Hyper-Flex performance polyurethane. Resistant to under vehicle fluids such as: oils, coolants, road contaminants, etc.
Product Features:
See More
Product Features:
- Gains Both Performance and Longevity
- Will Handle Any and All Torque
- Out Lasts Rubber
Energy Suspension – Motor Mount (Part No.3.1117G)
from
$62.99
A true performance application component for cars, trucks, hot rods and racing/competition vehicles – yet designed to be also used for street vehicles. Soft-running enough to absorb vibrations for street use yet rugged for racing use. When required- a torque resistant safety interlock design is used that is comparable in strength to those too hard-running metal mounts. Replaces the original, short lived and typically too-soft rubber mounts and outdates those hard-running metal motor mounts. The popular early style mounts for General Motors vehicles are available in either zinc or chrome metal finishes. Made of Hyper-Flex performance polyurethane. Resistant to under vehicle fluids such as: oils, coolants, road contaminants, etc.
Product Features:
See More
Product Features:
- Gains Both Performance and Longevity
- Will Handle Any and All Torque
- Out Lasts Rubber
Energy Suspension – MotorMt (Part No.3.1148R)
from
$167.99
MotorMt
Anchor – Engine Mount: Front Right, Front Left, 1 Piece (Part No.2142)
from
$7.29
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to CHEV 57-73; GMC 71-73; PONT 71-72;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
- MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
- HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
- SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
- HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
- For Years: 1957-1973
- Weight approx: 2 Lbs
- WITHOUT INTERLOCK
- PART GROUP: 2142, 2142
Energy Suspension – Motor Mount (Part No.3.1118R)
from
$89.99
A true performance application component for cars, trucks, hot rods and racing/competition vehicles – yet designed to be also used for street vehicles. Soft-running enough to absorb vibrations for street use yet rugged for racing use. When required- a torque resistant safety interlock design is used that is comparable in strength to those too hard-running metal mounts. Replaces the original, short lived and typically too-soft rubber mounts and outdates those hard-running metal motor mounts. The popular early style mounts for General Motors vehicles are available in either zinc or chrome metal finishes. Made of Hyper-Flex performance polyurethane. Resistant to under vehicle fluids such as: oils, coolants, road contaminants, etc.
Product Features:
See More
Product Features:
- Gains Both Performance and Longevity
- Will Handle Any and All Torque
- Out Lasts Rubber
Energy Suspension – MotorMt (Part No.3.1150R)
from
$175.99
MotorMt
Anchor – Engine Mount: Rear, 1 Piece (Part No.2688)
from
$14.99
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to CHEV 85-88; TOYOTA 84-87;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
- MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
- HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
- SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
- HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
- For Years: 1984-1988
- Weight approx: 2 Lbs
Energy Suspension – MotorMt (Part No.3.1150G)
from
$175.99
MotorMt
Energy Suspension – Motor Mount (Part No.3.1115R)
from
$91.99
A true performance application component for cars, trucks, hot rods and racing/competition vehicles – yet designed to be also used for street vehicles. Soft-running enough to absorb vibrations for street use yet rugged for racing use. When required- a torque resistant safety interlock design is used that is comparable in strength to those too hard-running metal mounts. Replaces the original, short lived and typically too-soft rubber mounts and outdates those hard-running metal motor mounts. The popular early style mounts for General Motors vehicles are available in either zinc or chrome metal finishes. Made of Hyper-Flex performance polyurethane. Resistant to under vehicle fluids such as: oils, coolants, road contaminants, etc.
Product Features:
See More
Product Features:
- Gains Both Performance and Longevity
- Will Handle Any and All Torque
- Out Lasts Rubber
Energy Suspension – Motor and Transmission Mount (Part No.3.1134R)
from
$249.99
Product Features:
See More
- Re-Engineered to Handle High Horsepower
- Outlasts Rubber
- Virtually Indestructible
Energy Suspension – Performance Polyurethane Motor Mount for GM Vehicles (Part No.3.1114R)
from
$57.99
A true performance application component for cars, trucks, hot rods and racing/competition vehicles – yet designed to be also used for street vehicles. Soft-running enough to absorb vibrations for street use yet rugged for racing use. When required- a torque resistant safety interlock design is used that is comparable in strength to those too hard-running metal mounts. Replaces the original, short lived and typically too-soft rubber mounts and outdates those hard-running metal motor mounts. The popular early style mounts for General Motors vehicles are available in either zinc or chrome metal finishes. Made of Hyper-Flex performance polyurethane. Resistant to under vehicle fluids such as: oils, coolants, road contaminants, etc.
Product Features:
See More
Product Features:
- Gains Both Performance and Longevity
- Will Handle Any and All Torque
- Out Lasts Rubber
Anchor – Engine Mount: Front Left, Front Right, 1 Piece (Part No.2283)
from
$11.49
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to CHEV 66-74; GMC 71-72;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
- MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
- HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
- SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
- HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
- For Years: 1966-1974
- Weight approx: 3 Lbs
- PRODUCT: MADE IN THE USA
- HEIGHT: 1 13/16 INCH / 47 MM PLATE TO BOLT HOLE
- CRADLE WIDTH: 2 3/8 INCH / 60.325 MM
- INTERLOCK
- PART GROUP: 2283, 2283
Energy Suspension – Motor Mount (Part No.3.1116G)
from
$38.99
A true performance application component for cars, trucks, hot rods and racing/competition vehicles – yet designed to be also used for street vehicles. Soft-running enough to absorb vibrations for street use yet rugged for racing use. When required- a torque resistant safety interlock design is used that is comparable in strength to those too hard-running metal mounts. Replaces the original, short lived and typically too-soft rubber mounts and outdates those hard-running metal motor mounts. The popular early style mounts for General Motors vehicles are available in either zinc or chrome metal finishes. Made of Hyper-Flex performance polyurethane. Resistant to under vehicle fluids such as: oils, coolants, road contaminants, etc.
Product Features:
See More
Product Features:
- Gains Both Performance and Longevity
- Will Handle Any and All Torque
- Out Lasts Rubber
Anchor – Engine Mount: Front Left, Front Right, 1 Piece (Part No.2292)
from
$13.49
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to BUIC 68-96; CADI 76-96; CHEV 72-05; GMC 73-99; OLDS 73-92; PONT 73-92;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
- MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
- HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
- SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
- HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
- For Years: 1968-2005
- Weight approx: 3 Lbs
- PRODUCT: MADE IN THE USA
- DESIGN: CLAMSHELL
- PART GROUP: 2292, 2292
Mr. Gasket – Solid Motor Mount (Part No.3672)
from
$71.09
Mr. Gasket Solid Steel Motor Mounts are recommended only for competition applications. This .180 inch thick, zinc dichromate plated solid mounts do not have the flexing present in rubber or even polyurethane engine mounts. This prevents lateral engine movement or twisting in high horsepower and torque applications. Nor will steel mounts break as easily as stock rubber mounts can. Engine movement in applications like this can cause contact of engine components into places they do not need to be (like headers hitting the frame of the car). Also engine twisting can cause severe drivetrain misalignment affecting shifting or even power transmission to the ground. However, without the insulative effect of rubber, vibration will be substantial and thus solid mounts are not recommended for the street.
Product Features:
See More
Product Features:
- .180 inch thick solid steel minimizes engine movement
- Solid steel less prone to breakage than stock rubber mounts
- Prevent driveline misalignment that can affect accurate shifting and power transmission
- Prevents engine accessories from coming in contact with frame due to movement
- Recommended for competition use
- Sold as a LH/RH pair
Energy Suspension – Motor and Transmission Mount (Part No.3.1122G)
from
$153.99
Product Features:
See More
- Re-Engineered to Handle High Horsepower
- Outlasts Rubber
- Virtually Indestructible
Energy Suspension – Motor and Transmission Mount (Part No.3.1130R)
from
$106.99
Product Features:
See More
- Re-Engineered to Handle High Horsepower
- Outlasts Rubber
- Virtually Indestructible
Popular 1972 Chevrolet Nova Engine Mounts Categories
1972 Chevrolet Nova Engine Mounts
Maybe you’re in the middle of a full rebuild of that 1972 Chevrolet Nova. Maybe you just need a couple of Engine Mounts. Either way, Advance Auto Parts has 21 different Engine Mounts in our inventory ranging from $7.29 to $279.99. That means you can find the exact parts or products you need to keep that 1972 Chevrolet Nova running smoothly.
Engine Mounts are only as good as their brand. We stock 3 different brands to make sure you have plenty of trusted parts to choose from for your 1972 Chevrolet Nova. Anchor, Energy Suspension, and KAI are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Engine Mounts for your 1972 Chevrolet Nova, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.
So if you’re in the market for aftermarket Engine Mounts to keep your 1972 Chevrolet Nova rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Engine Mounts Brands To Make Your 1972 Chevrolet Nova Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 1972 Chevrolet Nova demands trusted brand parts and products to keep it running. Many trusted brands of Engine Mounts make up Advance Auto Parts’ inventory, and all are ready to help make your Nova the best it can be. Be sure to browse some of our top Engine Mounts brands and parts.
Popular Energy Suspension Engine Mounts
We carry Energy Suspension parts in our stock across Engine Mounts categories, plus more. For a 1972 Chevrolet Nova, our most popular Energy Suspension Engine Mounts include:
Top 1972 Chevrolet Nova Engine Mounts from Anchor
Anchor products are another trusted brand when it comes to Engine Mounts for your 1972 Chevrolet Nova. Popular Anchor parts include:
FAQs for 1972 Chevrolet Nova Engine Mounts
What are the most purchased Engine Mounts for the 1972 Chevrolet Nova?
Out of 21 Engine Mounts for the 1972 Chevrolet Nova, the most popular in our inventory are:
