1972 Chevrolet Monte Carlo Differentials

Essential 1972 Chevrolet Monte Carlo Differentials

Yukon Gear – Mini Spool For GM 8.5" With 28 Spline Axles (Part No.32232)

Mini Spool For GM 8.5" With 28 Spline Axles

from

$165.99
10 bolt Mini Spool for 8.5″ GM with 28 spline axles. Mini spools are a low-cost traction option for vehicles looking for full-time lockup. The mini spool installs into a standard open carrier and give 100% power to both tires at all times. These units are not recommended for street-driven vehicles. We recommend full spools for vehicles with large tires or high horsepower. These units come with a one year warranty against manufacturing defects.

Product Features:
  • Fits GM 8.5″ with 28 spline axles
  • Installs into a standard open carrier case
  • Provides 100% traction to both wheels at all times
  • Not recommended for street driven vehicles
See More

Yukon Gear – 1541H Alloy Rear Axle For 8.2" And 8.5" GM Passenger (Part No.21244)

1541H Alloy Rear Axle For 8.2" And 8.5" GM Passenger

from

$273.99
Yukon 1541H alloy rear axle for 8.2″ and 8.5″ GM passenger with a length of 30-1/4″ inches (2.780″ hub) and 28 splines. Yukon 1541H alloy axles offer a strength increase over stock while retaining a low cost. Yukon 1541H alloy rear axles come with a one year warranty against manufacturing defects. This is a C-clip axle.

Product Features:
  • Fits GM 8.2.” and 8.5″ passenger car
  • 28 spline
  • 30 1/8″ long
  • 2.780″ brake pilot
See More

Yukon Gear – Standard Open Carrier Case, GM 7.625", 3.23 & Up (Part No.20102)

Standard Open Carrier Case, GM 7.625", 3.23 & Up

from

$481.99
7.625″ GM standard Open case, 3.23 & up, Large & SM windows, loaded. 28 Spline.

Product Features:
  • Standard open carrier case and spiders
  • 7.5″ & 7.625″ 28 spline applications
  • 3.23 and up ratio only
  • Large and Small windows
See More

Yukon Gear – The Carrier Bearing Puller (Part No.56034)

The Carrier Bearing Puller

from

$689.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to most standard one ton applications. This unit is works with differentials up to one-ton applcations. It is not compatible with Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

Product Features:
  • Carrier bearing puller
  • Works with an impact gun to safely and easliy remove carrrier bearings
  • Not compatible with Dana 70HD, Dana 80, Ford 10.25″ and 10.5″ or Gm and Chrysler 11.5″ applications
See More

Richmond Gear – Differential Spool Bearing Kit (Part No.29-0013-1)

Differential Spool Bearing Kit

from

$58.99
Richmond Gear is the leading manufacturer of professional quality, high-performance drivetrain products. Our complete line of products ranges from high performance ring-and-pinion sets for serious street and racing applications to torque-hungry manual transmissions and components. Richmond Gear products have been winners both at the Daytona 500 and U.S. Nationals for decades. WINNERS RUN RICHMOND!

Product Features:
  • For over 80-years, the Richmond Double-Diamond logo has represented some of the highest quality gears in the racing industry. Winners Run Richmond!
  • The superior quality of Richmond gearsets is a result of outstanding design, world class manufacturing and an extensive testing process that is performed on all products.
  • Richmond performance gearsets have been winners for decades at: NHRA, NMRA, NMCA, Daytona 500, WISSOTA and U.S. Nationals.
  • Richmond Gear is a leading manufacturer of high performance ring and pinion gearsets and drivetrain components, backed by a two year warranty.
  • Engineered to perform faster and be more reliable, Richmond performance drivetrain products are the result of a continuous research and development program combined with state-of-the-art manufacturing capabilities.
See More

USA Standard Gear – Spider Gear Kit For GM 12 Bolt Car And Truck (Part No.39021)

Spider Gear Kit For GM 12 Bolt Car And Truck

from

$161.99
Product Features:
  • Spider gear kit
  • Fits GM 12 bolt passenger car and truck open differential with 30 spline axles
  • Includes two side gears, two pinion gears, cross pin shaft, cross pin bolt and spider gear thrust washers.
See More

Mr. Gasket – Differential Gasket (Part No.84A)

Differential Gasket

from

$18.09
Mr. Gasket Axle Housing/Differential Cover or Rear End Gaskets are manufactured from a .047-inch thick cellulose/nitrile composite gasket material for excellent sealing and durability. They are precision die-cut for an excellent fit. Fits 1965-1972 Chevrolet/GM passenger car 12 bolt 8.875-inch ring gear 1965-72 Passenger Car.

Product Features:
  • .047″ thick cellulose/nitrile composite gasket material
  • Precision die cut
  • Reusable
See More

Yukon Gear – Super Carrier Shim Kit For Ford 8.8", GM 12 Bolt Car & Truck, 8.6 & Vette (Part No.55002)

Super Carrier Shim Kit For Ford 8.8", GM 12 Bolt Car & Truck, 8.6 & Vette

from

$59.99
Product Features:
  • Super carrier shim kit for Ford 8.8″, GM 12 bolt passenger car and truck, GM 8.0″, 8.6″, 8.6″ IRS and 1963-1979 Corvette
  • Interlocking design makes installation much easier
See More

Powertrax – No-Slip Traction System (Part No.9207822805)

No-Slip Traction System

from

$544.99
For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.
  • Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles.
  • Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction.
  • Powertrax® = Extreme Traction Systems!
  • See More

    Felpro – Differential Cover Gasket (Part No.RDS 55029)

    Differential Cover Gasket

    from

    $7.49
    Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

    Product Features:
    • Meets or exceeds all original equipment specifications
    • Application specific design to ensure a perfect fit
    • Unsurpassed quality you can trust
    • Validated for fit, form and function
    • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
    See More

    Dorman – Differential Pinion Yoke Assembly (Part No.697-553)

    Differential Pinion Yoke Assembly

    from

    $221.99
    Worn or damaged differential end yoke causing driveline vibrations? This direct replacement end yoke matches the original equipment part for a trustworthy repair and reliable performance.

    Product Features:
    • Direct replacement – this differential end yoke matches the fit and construction of the original yoke.
    • Excellent value – this replacement end yoke offers original equipment quality at a fraction of the price of dealer parts.
    • Quality materials – this end yoke is machined from cast iron for strength and is precision machined for reliability
    • Validated fit – this differential end yoke has been tested to confirm accurate fit
    See More

    Driveworks – Tapered Roller Bearing (Part No.S-LM-603012)

    Tapered Roller Bearing

    from

    $6.79
    Product Features:
    • Brand may vary by location
    See More

    Richmond Gear – RngPnnInstlKt (Part No.83-1022-B)

    RngPnnInstlKt

    from

    $43.99
    RngPnnInstlKt

    Yukon Gear – Chrome Cover For GM 12 Bolt Car (Part No.32011)

    Chrome Cover For GM 12 Bolt Car

    from

    $62.99
    Chrome cover for GM 12P.

    Product Features:
    • Fits GM 12 bolt passenger car
    • Chrome
    See More

    Yukon Gear – Dana 25, 27, 30, 44, Model 20 And Model 35, GM 7.5", 8.2", 8.5", 12P, 12T, C9.25 Rear Cover Bolt (Part No.33286)

    Dana 25, 27, 30, 44, Model 20 And Model 35, GM 7.5", 8.2", 8.5", 12P, 12T, C9.25 Rear Cover Bolt

    from

    $9.99
    5/16″-18 cover bolt, Dana Spicer 25, 27, 30 and 44, AMC Model 20 and Model 35, Chrysler 9.25 rear, GM 7.5″, 7.625″, 8.2″, 8.5″, 12 bolt passenger car and truck.

    Product Features:
    • Cover bolt for Dana Spicer 25, 27, 30 and 44, AMC Model 20 and Model 35, GM 7.5″, 7.625″, 8.2″, 8.5″ and 12 bolt passenger car and truck.
    • 1/2″ head
    See More

    Yukon Gear – Cross Pin Bolt (Part No.33067)

    Cross Pin Bolt

    from

    $6.99
    Cross pin bolt for Chrysler 8.25″, 9.25″ rear, Ford 7.5″, 8.8″, GM 12 bolt car & truck, 7.2″ IFs, 7.5″, 7.6″, 8.0″, 8.25″ IFS & 8.5″.

    Product Features:
    • Cross pin bolt for Chrysler 8.25″ and 9.25″ rear, Ford 7.5″ and 8.8″, GM 12 botl car and truck, 8.5″, 8.25″ IFS, 8.0″, 7.625″, 7.5″ and 7.2″ IFS
    See More

    Yukon Gear – Pinion Nut Washer (Part No.33166)

    Pinion Nut Washer

    from

    $23.99
    Pinion nut washer for GM 12 bolt car & truck, 55-62 GM car & truck, GM 8.2″ & 63-79 Corvette.

    Product Features:
    • Pinion nut washer for GM 12 bolt car and truck, 1955-1964 GM car and truck, GM 8.2″ and 1963-1979 Corvette.
    See More

    Royal Purple – High Performance SAE 5W30 Synthetic Motor Oil, API Certified, 1 QT (Part No.01530)

    High Performance SAE 5W30 Synthetic Motor Oil, API Certified, 1 QT

    from

    $12.99
    High Performance Motor Oil API LICENSED MOTOR OIL Royal Purple High Performance Motor Oil combines premium base oils with proprietary additive technologies to create a high performance synthetic engine oil that optimizes performance and protection. Royal Purple High Performance Motor Oils carry the current API and ILSAC engine oil licenses, as well as the GM dexos1 gasoline engine oil approval. ILSAC GF-6 AND GM DEXOS1 Modern gasoline direct injection (GDI) engines have achieved levels of power and fuel economy never before possible in passenger car engines. As a result, smaller engines operate at much higher loads across all engine speeds. This has caused increased wear in critical areas of the engine, and created a destructive phenomenon called low-speed pre-ignition (LSPI). The unique, state-of-the-art additive technology in Royal Purple High Performance engine oils is designed specifically to address these issues, and help engines maintain performance and reliability.

    Product Features:
    • Better Wear Protection
    • Increased Protection against Low Speed Pre-Ignition
    • Increased Fuel Efficiency
    • Better Protection for Vehicle Exhaust Emissions Equipment
    • Improved Compatibility with Fuels Containing Ethanol
    • Superior Corrosion Protection
    • Made in USA
    See More

    USA Standard Gear – Standard Spider Gear Set For GM 8.5", 28 Spline (Part No.39026)

    Standard Spider Gear Set For GM 8.5", 28 Spline

    from

    $209.99
    Product Features:
    • Spider gear kit
    • Fits GM 8.5″ 28 spline open differential
    • Includes two side gears, two pinion gears, cross pin shaft, cross pin bolt and spider gear thrust washers.
    See More

    Yukon Gear – Pinion Depth Shims For GM 8.25" IFS, 8.5", 12 Bolt Car, Ford 8.8" & Chrysler 8.25" (Part No.55009)

    Pinion Depth Shims For GM 8.25" IFS, 8.5", 12 Bolt Car, Ford 8.8" & Chrysler 8.25"

    from

    $27.99
    8.25″ IFS, 8.5″, 12P, 7.5″ F, 8.8″ F, 8.25″ Chrysler pinion shim kit.

    Product Features:
    • Pinion depth shims for GM 8.25″ IFS, 8.5″, 8.6″, 12 bolt passenger car, Ford 7.5″ and 8.8″, Chrysler 8.25″
    See More

    Motive Gear – Differential Ring and Pinion (Part No.GM7.5-373)

    Differential Ring and Pinion

    from

    $224.99


    Product Features:
    • GM 10BL 7.5&7.625 R/P 3.73 MG 10 3/8 X 18 LH THRED BLTS, PD=1.438
    See More

    Yukon Gear – Minor Install Kit For GM 8.5" Rear Differential (Part No.12055)

    Minor Install Kit For GM 8.5" Rear Differential

    from

    $48.99
    Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up. kit includes a pinion seal, crush sleeve (if applicable), complete shim kit, marking compound and brush. (includes Supershims)

    Product Features:
    • Fits GM 8.5″ rear
    • Included are a pinion seal, crush sleeve , complete shim kit, marking compound and brush.
    See More

    Pro-King – Differential Cross Shaft (Part No.742G673)

    Differential Cross Shaft

    from

    $28.49
    Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

    Product Features:
    • All products are designed to meet or exceed OE quality, form, fit and funtion.
    See More

    Yukon Gear – Bearing Race Driver (Part No.56017)

    Bearing Race Driver

    from

    $215.99
    Bearing race driver. No return.

    Product Features:
    • Bearing race driver
    • Fits HM89410 race
    • All steel construction
    See More

    Yukon Gear – Dura Grip Positraction For GM 12 Bolt Car With 30 Spline Axles, 4.10 & Up (Part No.26013)

    Dura Grip Positraction For GM 12 Bolt Car With 30 Spline Axles, 4.10 & Up

    from

    $839.99
    The Yukon Dura Grip provides aggressive yet smooth traction to give you the confidence & performance you need. Get longer life and better traction with the heavy duty Yukon Dura Grip Positraction. The Yukon Dura Grip uses a nodular case and forged 4320 internals for added strength along with composite clutches for high performance and long life. All units are Rebuildable and many offer upgrades to increase aggressiveness for racing applications. Each unit carries a one year warranty against defects.

    Product Features:
    • Fits GM 12 bolt passenger car with 30 spline axles
    • 4.10 and up ratio only
    • 4-spring, clutch style positraction
    • Internal gears are manufactured using forged 4320 steel and cut to provide stronger teeth
    • Fully rebuildable
    • Assembled in the USA
    • 30 spline
    See More

    Yukon Gear – Chrome Moly Cross Pin Shaft For Mini-Spool For 8.2" GM (Part No.32237)

    Chrome Moly Cross Pin Shaft For Mini-Spool For 8.2" GM

    from

    $93.99
    Chrome Moly cross pin shaft for Mini-Spool for 8.2″ GM HD.

    Product Features:
    • Hardened cross pin shaft
    • Fits GM 8.2″
    See More

    Yukon Gear – Side Gear Thrust Washer For GM 8.2" & 55P (Part No.33529)

    Side Gear Thrust Washer For GM 8.2" & 55P

    from

    $10.99
    Product Features:
    • Side gear thrust washer for GM 8.2″ and 1955-1964 GM passenger car
    • Fits standard open differentials only
    See More

    Yukon Gear – GM 7.5" Standard Open Side Gear Thrust Washer (Part No.33389)

    GM 7.5" Standard Open Side Gear Thrust Washer

    from

    $11.99
    GM 7.5″ standard Open side gear thrust washer.

    Product Features:
    • Side gear thrust washer
    • Fits GM 7.5″
    See More

    1972 Chevrolet Monte Carlo Differentials

    Maybe you’re in the middle of a full rebuild of that 1972 Chevrolet Monte Carlo. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 245 different Differentials in our inventory ranging from $0.91 to $1,604.99. That means you can find the exact parts or products you need to keep that 1972 Chevrolet Monte Carlo running smoothly.

    Differentials are only as good as their brand. We stock 15 different brands to make sure you have plenty of trusted parts to choose from for your 1972 Chevrolet Monte Carlo. Valvoline, FELPRO, and Yukon Gear are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

    We know you’ll find the perfect Differentials for your 1972 Chevrolet Monte Carlo, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 3,720 reviews in this category, some of the top rated parts include Bearings with 3.9 stars and Differential Master Bearing Kit – Koyo with 3.8 stars.

    So if you’re in the market for aftermarket Differentials to keep your 1972 Chevrolet Monte Carlo rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

    Differentials Brands To Make Your 1972 Chevrolet Monte Carlo Last

    Simple repair, complete replacement, or a full rebuild. No matter the job, your 1972 Chevrolet Monte Carlo demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your Monte Carlo the best it can be. Be sure to browse some of our top Differentials brands and parts.

    Popular Driveworks Differentials

    We carry Driveworks parts in our stock across Differential Pinion Seals categories, plus more. For a 1972 Chevrolet Monte Carlo, our most popular Driveworks Differentials include:
    Oil Seal
    from $6.29
    (1)
    Oil Seal
    Differential Pinion Seals

    Top 1972 Chevrolet Monte Carlo Differentials from Felpro

    Felpro products are another trusted brand when it comes to Differentials for your 1972 Chevrolet Monte Carlo. Popular Felpro parts include:
    Differential Cover Gasket
    from $9.99
    (195)
    Differential Cover Gasket
    Rear Differential Cover Gaskets
    Differential Cover Gasket
    from $7.49
    (7)
    Differential Cover Gasket
    Rear Housing Cover Gaskets

    FAQs for 1972 Chevrolet Monte Carlo Differentials

    What are the most purchased Differentials for the 1972 Chevrolet Monte Carlo?

    Out of 245 Differentials for the 1972 Chevrolet Monte Carlo, the most popular in our inventory are:
    DEX/MERC Automatic Transmission Fluid, 1 Gallon
    from $35.99
    (17)
    DEX/MERC Automatic Transmission Fluid, 1 Gallon
    Differential Oil
    3 Qt - 80W90 Conventional Gear Oil With Posi Additive
    from $57.99
    This product is not rated
    3 Qt – 80W90 Conventional Gear Oil With Posi Additive
    Differential Oil

    What are the top-rated 1972 Chevrolet Monte Carlo Differentials?

    Top-rated Differentials for your 1972 Chevrolet Monte Carlo based on customer reviews/ratings are:
    Bearings
    from $23.99
    (7)
    Bearings
    “Good price”
    Differential Master Bearing Kit - Koyo
    from $156.99
    (5)
    Differential Master Bearing Kit – Koyo
    “was delivered as promised and on time”
    Differential Carrier Shim Kit
    from $8.49
    (3)
    Differential Carrier Shim Kit
    “worked great”