1972 Checker Aerobus Valve Cover and Cylinder Heads

Essential 1972 Checker Aerobus Valve Cover and Cylinder Heads

ARP Auto Racing – For Use With 2004 And Later Gen Iii/ Ls Series Small Block, 200000Psi Tensile (Part No.134-3610)

For Use With 2004 And Later Gen Iii/ Ls Series Small Block, 200000Psi Tensile

from

$164.99
All Pro Series bolts are cold forged to ensure molecular integrity, heat treated prior to thread rolling and machining, and are rated at 200,000 PSI tensile strength. ARP Pro Series head bolt kits are application specific, designed for use with typically competition only components. These fasteners deliver superior strength and meet the ARP zero defect zero failure quality standard. Hardened and parallel ground washers are included with each kit to ensure even load distribution and accurate torque readings. All Pro Series head bolts have a reduced wrenching hex or 12 point head and wide area flange to eliminate the need for valve train removal for cylinder head retorquing and permits the use of larger diameter valve springs. Most applications have undercut short bolts that can help eliminate head gasket failures through providing more stretch to compensate for the additional compression of gaskets.

Product Features:
  • Pro Series Bolts Are Cold Forged To Ensure Molecular Integrity, Heat Treated Prior To Thread Rolling And Machining
  • Nominally Rated At 200,000 Psi Tensile Strength
  • These Fasteners Deliver Superior Strength And Meet The ARP Zero Defect Zero Failure Quality Standard
  • Bolts Have A Reduced Wrenching Hex Or 12 Point Head And Wide Area Flange To Eliminate The Need For Valve Train Removal For Cylinder Head Retorquing And Permits The Use Of Larger Diameter Valve Springs
See More

Felpro – Engine Cylinder Head Bolt Set (Part No.ES 72856)

Engine Cylinder Head Bolt Set

from

$31.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Avoid risk associated with re-use of T-T-Y (torque to yield) head bolts
  • Validated for fit, form and function
  • Unsurpassed quality you can trust
See More

ARP Auto Racing – For Use With Oem Cylinder Heads/ Most Edelbrock, 12Point Head, 180000Psi Tensile (Part No.134-3701)

For Use With Oem Cylinder Heads/ Most Edelbrock, 12Point Head, 180000Psi Tensile

from

$112.99
All Pro Series bolts are cold forged to ensure molecular integrity, heat treated prior to thread rolling and machining, and are rated at 200,000 PSI tensile strength. ARP Pro Series head bolt kits are application specific, designed for use with typically competition only components. These fasteners deliver superior strength and meet the ARP zero defect zero failure quality standard. Hardened and parallel ground washers are included with each kit to ensure even load distribution and accurate torque readings. All Pro Series head bolts have a reduced wrenching hex or 12 point head and wide area flange to eliminate the need for valve train removal for cylinder head retorquing and permits the use of larger diameter valve springs. Most applications have undercut short bolts that can help eliminate head gasket failures through providing more stretch to compensate for the additional compression of gaskets.

Product Features:
  • Pro Series Bolts Are Cold Forged To Ensure Molecular Integrity, Heat Treated Prior To Thread Rolling And Machining
  • Nominally Rated At 200,000 PSI Tensile Strength
  • These Fasteners Deliver Superior Strength And Meet The ARP Zero Defect Zero Failure Quality Standard
  • Bolts Have A Reduced Wrenching Hex Or 12 Point Head And Wide Area Flange To Eliminate The Need For Valve Train Removal For Cylinder Head Retorquing And Permits The Use Of Larger Diameter Valve Springs
See More

Felpro – Engine Valve Cover Load Spreader Set (Part No.ES 72676)

Engine Valve Cover Load Spreader Set

from

$34.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered and manufactured specifically for the repair environment
  • Unsurpassed quality you can trust
  • Includes all parts needed to complete the repair
See More

Edelbrock – Sure Seat Valve Springs for cylinder (Part No.5821)

Sure Seat Valve Springs for cylinder

from

$198.99
Product Features:
  • Non-Rotator Type
  • 1.540 in. Outer Diameter
  • 0.760 in. Inner Diameter
  • 0.760 in. Coil Blind
  • Set of 16
See More

Edelbrock – Sure Seat Valve Springs for Chevy 262-400 V8 1957-95 (Part No.5802)

Sure Seat Valve Springs for Chevy 262-400 V8 1957-95

from

$60.99
Springs made of highest quality spring wire. Springs precision wound to close tolerances. Non-Rotator style: Dyno tested and street proven. Great match to Edelbrock camshaft kit.

Product Features:
  • For Use With Cast Iron Heads
  • Springs Made of Highest Quality Spring Wire
  • Springs Precision Wound To Close Tolerances
  • Use with Original Equipment Heads Only
See More

Edelbrock – Sure Seat Valve Springs for Chrysler 318-340-360 V8 1957-89 (Part No.5877)

Sure Seat Valve Springs for Chrysler 318-340-360 V8 1957-89

from

$59.99
Product Features:
  • Non-Rotator Type
  • 1.394 in. Outer Diameter
  • 1.010 in. Inner Diameter
  • 1.010 in. Coil Blind
  • Set of 16
See More

Edelbrock – Valve Seat for S/B Chevy heads with 1.60" Valves (Part No.9710)

Valve Seat for S/B Chevy heads with 1.60" Valves

from

$18.99
Product Features:
  • Valve Seats
  • Performer Series
  • 50-State Street Legal
See More

ARP Auto Racing – 1.75"Oal Stud, 0.8"D Adjuster Third, 3/8"-24, 7/16"-14, 0.7"D Screw-In, Set Of 16 (Part No.134-7101)

1.75"Oal Stud, 0.8"D Adjuster Third, 3/8"-24, 7/16"-14, 0.7"D Screw-In, Set Of 16

from

$78.99
If you have ever installed a rocker stud into a cylinder head and watched it wobble as it screwed in, you knew from the beginning that the rocker geometry was going to be inconsistent all over the place. ARP rocker studs are concentric within 0.005 T.I.R. thread pitch to thread pitch. They run in straight and true. Lengths are exact designed to provide positive seating every time. An extra large radius base offers greater resistance to flex. Available in both High Performance and Pro Series models. To be used with ARP patented Perma Loc(TM) adjusters.

Product Features:
  • Made Of 8740 Chrome Moly Forgings
  • Heat Treated To 180,000 PSI
  • Excellent For Elapsed Time Bracket Racing, Limited Rule Oval Track Competition And Street Use
  • Lengths Are Exact Designed To Provide Positive Seating Every Time
  • Set of 16
  • .800″ Adjuster Thread Length
  • 3/8-24 Shank Diameter and Thread
  • 3/8″ Typical Small Block Application
See More

Edelbrock – RPM Small-Block Chrysler LA Cylinder Head Bare (Part No.60769)

RPM Small-Block Chrysler LA Cylinder Head Bare

from

$743.99
Product Features:
  • Out-of-the-Box Bolt-On Performance
  • Hand-Blended Intake and Exhaust Bowls
  • CNC-Matched Intake/Exhaust Ports in Std Location
  • Thicker Deck Surfaces than Other Brands
See More

Edelbrock – RPM Small-Block Chevy Cylinder Head SBC 70cc Hydraulic Flat Tappet Cam (Part No.60739)

RPM Small-Block Chevy Cylinder Head SBC 70cc Hydraulic Flat Tappet Cam

from

$990.99
Product Features:
  • Out-of-the-Box Bolt-On Performance
  • With Straight Plugs
  • 70cc Combustion Chambers Improve Performance
  • Retain Stock Compression Ratio
See More

Edelbrock – RPM Small-Block Chevy Cylinder Head 64cc Hydraulic Flat Tappet Cam (Part No.60899)

RPM Small-Block Chevy Cylinder Head 64cc Hydraulic Flat Tappet Cam

from

$1192.99
Product Features:
  • Out-of-the-Box Bolt-On Performance
  • With Straight Plugs
  • 64cc Combustion Chambers Improve Performance
  • Retain Stock Compression Ratio
See More

Edelbrock – E-Tec-200 Small-Block Chevy Cylinder Head Hydraulic Flat Tappet Cam (Part No.60989)

E-Tec-200 Small-Block Chevy Cylinder Head Hydraulic Flat Tappet Cam

from

$891.99
Product Features:
  • 64cc combustion chamber with 200cc intake runner
  • 2.02 in. intake and 1.60 in. exhaust valves
  • Flat Tappet Camshaft Type
  • Exhaust And Intake 45 Degree Seat Angle
  • Sold as one complete head
See More

Felpro – Cylinder Head Gasket: Composite, Without Head Bolts (Part No.501 SD)

Cylinder Head Gasket: Composite, Without Head Bolts

from

$41.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • DESIGNED FOR THE TOUGHEST CONDITIONS — Engineered for hardworking vehicles that operate in severe conditions
  • STRONG AND DURABLE — Severe duty steel core gaskets designed slightly thicker to accommodate for machined surfaces
  • PREMIUM MATERIALS — High-grade stainless armor enhances strength and corrosion resistance while proprietary coatings enhance sealing and anti-stick properties
  • SUPERIOR SEAL — Precise embossed Printoseal sealing beads at all vital areas to eliminate leak paths
  • DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
See More

Felpro – Cylinder Head Gasket: Composite, Without Head Bolts (Part No.7191 S)

Cylinder Head Gasket: Composite, Without Head Bolts

from

$30.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Accommodates high cylinder pressures and cylinder head movement associated with performance engines
See More

Felpro – Cylinder Head Gasket: Embossed Steel, Without Head Bolts (Part No.7733 SH-1)

Cylinder Head Gasket: Embossed Steel, Without Head Bolts

from

$15.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Provides the robust seal needed to contain peak combustion pressures and temperatures
  • Validated for fit, form, and function
  • Unsurpassed quality you can trust
  • Unsurpassed quality you can trust
See More

Felpro – Cylinder Head Gasket: Composite, Without Head Bolts (Part No.8651 PT)

Cylinder Head Gasket: Composite, Without Head Bolts

from

$52.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • PROPRIETARY COATING – Nonstick anti-friction coating seals small surface imperfections
  • SUPERIOR SEAL – Precise embossed Printoseal sealing beads at all vital areas to eliminate leak paths
See More

Mr. Gasket – Mls Head Gasket (Part No.3128G)

Mls Head Gasket

from

$114.99
Our unique Multi-Layered steel head gasket embossment formation process optimizes the embossment radius, reduces stress points, enhances gasket conformability, and provides uniform clamp load distribution. This all results in superior surface contact between block and cylinder head. All head gasket layers/spacers go through an additional process to significantly reduce forming induced stress. Advantages are reduced brittleness in material, increased flexibility and deformation retention. This stabilizes the gasket, resulting in reduced cylinder bore distortion and improved combustion seal fro the extreme cylinder pressures found in high compression, supercharged and turbocharged applications. A proprietary polymer coating ensures the micro-seal of engine coolant and oil fluids. A typical MLS head gasket requires a smoother (30Ra) surface finish than composite head gaskets. Mr. Gasket’s proprietary polymer coating will seal a surface finish twice as rough (60Ra) as a typical MLS head gasket. For high performance street, drag race and oval track use.

Product Features:
  • Gasket bore – 4.035 inch: Compressed thickness – .040 inch
  • Manufactured from 3-layer premium grade stainless steel and state of the art laser cutting
  • Optimized sealing embossments seals extreme cylinder pressure
  • Provides excellent stability and reduces cylinder bore distortion.
  • Proprietary polymer coating ensures the micro seal of engine coolant and oil fluids.
  • Ideal for supercharged, turbocharged, nitrous oxide and extreme compression ratio engines
  • For high-performance street, drag race and oval track use
See More

ARP Auto Racing – ARP Cylinder Head Stud Kit (Part No.234-4301)

ARP Cylinder Head Stud Kit

from

$298.99
ARP only uses premium grade 8740 alloy and a proprietary ARP2000 alloy that are rated for superior to “aircraft” quality alloy steels. Secondly, each stud is placed vertically into special racks and precisely heat-treated to 200,000 psi for the 8740 material and 220,000 psi for the ARP2000 material. This procedure ensures complete heat penetration and the results are far superior to those lesser quality studs from other manufacturers who just dump pieces in a basket and hope for the best. 

Product Features:
  • 1/2″ 12-Point, 3/16″ Allen Socket Size(s)
  • 8740 Chromoly
  • Black Oxide
  • Small Block Chevy
  • Sold As A Kit
See More

Felpro – Cylinder Head Gasket Set (Part No.HS 7733 SH-2)

Cylinder Head Gasket Set

from

$35.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Head sets contain gaskets and seals necessary for a valve grind or head reconditioning job
  • Application specific design to ensure a perfect fit and premium seal
  • Premium quality parts you can trust
  • Engineered and manufactured specifically for the repair environment
  • Unsurpassed quality you can trust
  • Contains all the parts needed to complete the repair unless otherwise noted
See More

Felpro – Engine Cylinder Head Gasket Set (Part No.HS 7191 S-2)

Engine Cylinder Head Gasket Set

from

$71.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • PermaTorqueMLS head gaskets are built to meet or exceed all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered and manufactured specifically for the repair environment
  • Unsurpassed quality you can trust
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Felpro – Cylinder Head Gasket Set (Part No.HS 7733 PT-2)

Cylinder Head Gasket Set

from

$35.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Head sets contain gaskets and seals necessary for a valve grind or head reconditioning job
  • Application specific design to ensure a perfect fit and premium seal
  • Premium quality parts you can trust
  • Engineered and manufactured specifically for the repair environment
  • Unsurpassed quality you can trust
  • Contains all the parts needed to complete the repair unless otherwise noted
See More

Felpro – Cylinder Head Gasket Set (Part No.HS 7734 PT)

Cylinder Head Gasket Set

from

$88.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
See More

1972 Checker Aerobus Valve Cover and Cylinder Heads

Maybe you’re in the middle of a full rebuild of that 1972 Checker Aerobus. Maybe you just need a couple of Valve Cover and Cylinder Heads. Either way, Advance Auto Parts has 31 different Valve Cover and Cylinder Heads in our inventory ranging from $15.99 to $1,575.99. That means you can find the exact parts or products you need to keep that 1972 Checker Aerobus running smoothly.

Valve Cover and Cylinder Heads are only as good as their brand. We stock 5 different brands to make sure you have plenty of trusted parts to choose from for your 1972 Checker Aerobus. FELPRO, ARP Auto Racing, and Edelbrock are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Valve Cover and Cylinder Heads for your 1972 Checker Aerobus, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.

So if you’re in the market for aftermarket Valve Cover and Cylinder Heads to keep your 1972 Checker Aerobus rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Valve Cover and Cylinder Heads Brands To Make Your 1972 Checker Aerobus Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1972 Checker Aerobus demands trusted brand parts and products to keep it running. Many trusted brands of Valve Cover and Cylinder Heads make up Advance Auto Parts’ inventory, and all are ready to help make your Aerobus the best it can be. Be sure to browse some of our top Valve Cover and Cylinder Heads brands and parts.

Popular Edelbrock Valve Cover and Cylinder Heads

We carry Edelbrock parts in our stock across Engine Valve Springs and Cylinder Heads categories, plus more. For a 1972 Checker Aerobus, our most popular Edelbrock Valve Cover and Cylinder Heads include:
Sure Seat Valve Springs for Chevy 262-400 V8 1957-95
from $60.99
(2)
Sure Seat Valve Springs for Chevy 262-400 V8 1957-95
Engine Valve Springs

FAQs for 1972 Checker Aerobus Valve Cover and Cylinder Heads

What are the most purchased Valve Cover and Cylinder Heads for the 1972 Checker Aerobus?

Out of 31 Valve Cover and Cylinder Heads for the 1972 Checker Aerobus, the most popular in our inventory are:
Cylinder Head Gasket: Composite, Without Head Bolts
from $41.99
This product is not rated
Cylinder Head Gasket: Composite, Without Head Bolts
Cylinder Head Gaskets
Cylinder Head Gasket Set
from $35.49
(1)
Cylinder Head Gasket Set
Cylinder Head Gasket Sets
Cylinder Head Gasket: Embossed Steel, Without Head Bolts
from $15.99
This product is not rated
Cylinder Head Gasket: Embossed Steel, Without Head Bolts
Cylinder Head Gaskets