1972 Cadillac Fleetwood Performance and Racing Products
Find Your Specific 1972 Cadillac Fleetwood Performance and Racing Products
Below you will find various in-demand Cadillac Performance and Racing Products, components and accessories for your 1972 Fleetwood. Advance Auto Parts has popular Fleetwood parts like Performance Fuel Systems, Performance Engines, Performance Distributors and more. You’ll also find aftermarket and OEM Performance and Racing Products for other Fleetwood model years including
1988,
1989,
1990,
1991,
1992,
1993,
1994,
1995,
1996 and more. Select a category of 1972 Cadillac Fleetwood Performance and Racing Products below and start saving instantly.
Popular 1972 Cadillac Fleetwood Performance and Racing Products Categories
Essential Performance and Racing Products for 1972 Cadillac Fleetwoods
Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)
from
$199.99
Universal street and strip. For street-driven vehicles with breaker point ignition or OE electronic ignition. Delivers optimum performance when used with these Mallory ignition products: UNILITE (R) distributor with a HYFIRE (R) capacitive discharge ignition, magnetic breaker less distributor with a HYFIRE (R) capacitive discharge ignition, or dual point distributor. Effective to approximately 6500 RPM when used with a point type distributor (depending on engine combination). Effective to approximately 8000 RPM when used with a Mallory HYFIRE electronic ignition control (depending on engine combination).
Product Features:
See More
Product Features:
- Glass Filled Polyester Case
- Longer Spark Duration
- Increased Performance
- No Energy Loss Due To Arcing
- Includes Brass Contact Terminal
MSD Ignition – Distributor; GM LT-1 5.7L; 95-97 (Part No.83811)
from
$799.99
Leave it to MSD to build an all-out performance distributor to replace the OEM GM LT1 Optispark. We machine an entire billet block of aluminum down into a precise housing that fits in place of the factory piece. Then, we fill it with a reliable new pick-up assembly, a trick timing adjustment mechanism and top it off with an all new MSD distributor cap. The pick-up is an advanced optical encoder, a different style of optical pickup than the OEM. This type of pick-up has proven to be very reliable and stable through extreme rpm and conditions. The rotor is bolted to a drive assembly that is indexed to the shaft and is stabilized through the use of a large ball bearing assembly. Once installed, you have the ability to adjust the ignition timing. The only distributor that offers timing adjustability. An adjustment screw allows the timing to be tweaked up to 5 degrees. The distributor is equipped with a fresh air vent and has an extra thick mounting surface for the cap to eliminate leaks. The distributor is supplied complete with our heavy duty LT1 cap, rotor and the components required for installation.
Product Features:
See More
Product Features:
- Advanced optical encoder trigger design for accuracy/reliability.
- Rotor drive design is positively indexed and cannot slip.
- Large ball bearing stabilizes timing through 10;000 rpm.
- Fresh air vented and sealed to keep the elements out.
- Improved housing design and extra bolt eliminates leaks
- Easily Adjust The Timing Up To +/-5 deg.
Energy Suspension – Motor Mount (Part No.3.1116G)
from
$40.99
A true performance application component for cars, trucks, hot rods and racing/competition vehicles – yet designed to be also used for street vehicles. Soft-running enough to absorb vibrations for street use yet rugged for racing use. When required- a torque resistant safety interlock design is used that is comparable in strength to those too hard-running metal mounts. Replaces the original, short lived and typically too-soft rubber mounts and outdates those hard-running metal motor mounts. The popular early style mounts for General Motors vehicles are available in either zinc or chrome metal finishes. Made of Hyper-Flex performance polyurethane. Resistant to under vehicle fluids such as: oils, coolants, road contaminants, etc.
Product Features:
See More
Product Features:
- Gains Both Performance and Longevity
- Will Handle Any and All Torque
- Out Lasts Rubber
Hays – Power Train (Part No.10-630)
from
$573.99
Hays aluminum flywheels are manufactured from certified billet material that will not break up under the stress of high RPM and severe punishment of racing. Features replaceable steel surface insert. Precision balanced to either neutral (internal) or Detroit (external) specifications. Meets SFI specification 1.1 for racing.
Product Features:
See More
Product Features:
- Certified Billet Material
- Borg and Beck Clutch Pattern
- Long-Style Clutch Pattern
- Ring Gear Securely Mounted To Prevent Spinning
Edelbrock – Performer Intake Manifold for 1968-1976 Cadillac 472-500, Satin Finish (Part No.2115)
from
$553.99
Product Features:
See More
- Idle-5500 RPM Range
- Dual Plane Type-4150 Style Flange
- 4.88 in. Front Height, 5.34 in. Center Height, 5.81 in. Rear Height
- Satin Finish
- Made In The USA
Edelbrock – Performer Intake Manifold for 1987-95 Small Block Chevy, Satin Finish (Part No.2104)
from
$346.99Product Features:
- For Idle to 5500 RPM Street-Driven Performance
- Dual-Plane Low-Rise Intake w/180 Deg Firing Order
- Patented Runner Design Ensures Broad Torque Curve
- Excellent Throttle Response and Mid-Range Power
- 50-State Street Legal if Correct Carburetor Used
- Accepts Late-Model Choke; Waterneck; and HEI
- Accepts A/C And Alternator
- Accepts Exhaust Heated Chokes
B & M – Automatic Shifter, StarShifter (Part No.80675)
from
$340.99
Features include NHRA/ IHRA reverse lockout, backup light switch, neutral safety switch, polished T-handle. Cable operated for quick installation and accurate shifting. For 2 and 3 speed applications.
Product Features:
See More
Product Features:
- Base Trims For Custom Fit
- Cable Operated
- Quick Installation
- Accurate Shifting
- NHRA/IHRA Reverse Lockout Meets Requirements
- Includes Neutral Safety Switch
- Polished Aluminum. T-Handle and Cable
Hurst – Automatic Shifter, Quarter Stick Powerglide (Part No.3160001)
from
$472.99
The Hurst Quarter Stick is designed for 2 and 3 speed applications. Its precision gate style mechanism ensures a positive feel. It features, a neutral safety switch, NHRA approved reverse lockout, and a brushed aluminum cover.
Product Features:
See More
Product Features:
- Forward and Reverse Shift Patterns
- Chrome Plated Trigger for Detent Activity
- Factory Neutral Safety Switch
- Compact And Lightweight
- Roller Detent with Shifter Pattern
Mallory – Mallory Kit: Unil Conv: Delco: V8 (Part No.501)
from
$149.99
Put an end to high maintenance point ignition systems by installing a proven Mallory Unilite ignition conversion kit. Features at a glance, improves performance and fuel efficiency, easy to install with simple hand tools, reduced maintenance and is available for all popular 12-volt negative ground domestic cars and trucks.
Product Features:
See More
Product Features:
- Easy Installation
- Improved Fuel Economy
- Reduced Maintenance
- Accurate Timing
- Improved Performance
- Provides A Simple Conversion
- No Moving Parts To Wear Out
MSD Ignition – Harness; MSD 6 to GM Dual Connector Coil (Part No.8876)
from
$77.99
MSD Ignition control are easy to install, but we also offer several direct plug-in harnesses for late model vehicles! The harnesses plug directly into your factory coil and harness then four color coded wires plug into the corresponding wires of the MSD.
Product Features:
See More
Product Features:
- Plug-In Harness w/Color Coded Wires
- No Cutting Or Splicing
- Quick Easy Installation
- Provides A Direct Plug-In Installation
- When Adding An MSD Ignition Control
Competition Cams – Xtreme Energy 206/212 Hydraulic Flat (Part No.42-220-4)
from
$366.99
Featuring a quicker valve opening, the Xtreme Energy camshaft profile provides increased responsiveness and more area under the lift curve than older, slower grinds. Designed to increase performance without sacrificing driveability and creature comforts,
Product Features:
See More
Product Features:
- Excellent performance in street carbureted applications.
- More vacuum allows an increase in duration for improved performance and assists power brakes.
- Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
- Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.
Competition Cams – Magnum/Drag Race 253/253 Hydraulic Flat Cam (Part No.12-214-4)
from
$288.99
HYDRAULIC – Magnum: Pro Street/bracket, limited street driving. Intake, gears, 3500+ stall. Racy idle. 10.5:1 compression. OR Drag Race: 3500-4000 stall or 4 speed with 11:1+ compression.
Product Features:
See More
Product Features:
- HYDRAULIC – Magnum: Pro Street/bracket, limited street driving. Intake, gears, 3500+ stall. Racy idle. 10.5:1 compression. OR Drag Race: 3500-4000 stall or 4 speed with 11:1+ compression.
- 305/305 Advertised Duration, 253/253 Duration @ .050″, .525″/.525″ Lift, 110 Lobe Separation
- Valve spring upgrade required
Competition Cams – Reduced Travel OE-Style Hydraulic Roller Lifter for ’87+ SBC, LT/LS and V6 (Part No.875-1)
from
$39.99
Reduced Travel OE-Style Hydraulic Roller Lifter for ’87+ SBC, LT/LS and V6
Edelbrock – Complete Sure Seat Valve Spring Kit for Chevy 262-400 V8 1957-95 (Part No.5894)
from
$155.99
Complete kit includes retainers and locks. Springs made of highest quality spring wire. Springs precision wound to close tolerances. Includes superior quality steel retainers. Includes 7 degree heat-treated valve stem locks. Retainers and locks are black oxide coated. Non-rotator style: Dyno tested and street proven. Great match to Edelbrock camshaft kit.
Product Features:
See More
Product Features:
- Complete Kit: Includes Retainers And Locks
- Springs Made of Highest Quality Spring Wire
- Springs Precision Wound To Close Tolerances
- Includes Superior Quality Steel Retainers
- Includes 7 deg. Heat-Treated Valve Stem Locks
- Retainers and Locks Black Oxide Coated
- Dyno Tested And Street Proven
- Great Match to Edelbrock Camshaft Kit
Edelbrock – Sure Seat Valve Springs for Chevy 262-400 V8 1957-95 (Part No.5802)
from
$64.99
Springs made of highest quality spring wire. Springs precision wound to close tolerances. Non-Rotator style: Dyno tested and street proven. Great match to Edelbrock camshaft kit.
Product Features:
See More
Product Features:
- For Use With Cast Iron Heads
- Springs Made of Highest Quality Spring Wire
- Springs Precision Wound To Close Tolerances
- Use with Original Equipment Heads Only
B & M – Holeshot 3600 (Part No.20425)
from
$949.99
HoleShot 3600 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) APPLICATION: HoleShot 3600 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) A higher than stock stall speed as delivered by the Holeshot converter will provide several advantages and benefits in vehicles with modified engines. Many modifications, particularly big cams, tend to reduce low end power and torque. The high stall converter allows the engine to launch the car at higher rpm where more torque is available. The Holeshot is generally a very good choice for the typical street machine that is looking for better launch capability and more strength. Street rods with modified engines will also benefit from a Holeshot converter. If your vehicle is equipped with a plate type nitrous system, you will need a Nitrous Holeshot!! Stall speed listings are based on engines producing 230lb. ft. of torque at 2,500 rpm. More torque at 2,500 rpm will give you more stall speed, less torque at 2,500 rpm will give you less stall speed than the stall speed ratings indicated. Furnace brazed impeller. New precision steel alloy pump drive tube. New heavy duty needle bearing between stator and impeller (not a thrust washer). Needle bearing between stator and turbine. Furnace brazed turbine. Dual pattern drive lugs on some GM Holeshots. New turbine hub. New springs and rollers in stator.
Product Features:
See More
Product Features:
- Furnace Brazed Impeller
- Steel Alloy Pump Drive Tube
- Heavy Duty Needle Bearing
- Between Stator and Turbine
- Furnace Brazed Turbine
- Dual Pattern Drive Lugs
- New Turbine Hub
- New Springs/Rollers In Stator
B & M – Holeshot 3000 (Part No.20413)
from
$899.99
HoleShot 3000 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) APPLICATION: HoleShot 3000 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) A higher than stock stall speed as delivered by the Holeshot c
Product Features:
See More
Product Features:
- Furnace Brazed Impeller
- Steel Alloy Pump Drive Tube
- Heavy Duty Needle Bearing
- Between Stator and Turbine
- Furnace Brazed Turbine
MSD Ignition – Coil; GM External HEI Coil; High Performance (Part No.8226)
from
$78.99
Top off your GM ignition system with these great new replacement coils. The GM coils have MSD performance in factory style housings. MSD designed these coils by combining our blaster coil experience with e-core coil efficiency. Each coil has a unique turns ratio plus there is lower primary resistance than the stock coil. This all amounts to a bolt-in replacement coil that produces more output voltage. The coils will work with stock ignition systems as well as MSD equipped cars and trucks. Installation tip: If you plan to install an MSD ignition with your GM dual connector coil, use PN 8876 harness for a direct plug-in installation.
Product Features:
See More
Product Features:
- Direct performance replacement for GM dual connector coil
- 100:1 Turns Ratio
- Lower Primary Resistance Produces High Voltage Output
- Works w/Stock Ignition As Well As MSD Ignitions
Accel – Super Stock Coil Chrome (Part No.8140C)
from
$51.99
Excellent high performance replacement for import and domestic vehicles with canister type oil filled coil. Re-engineered windings for even higher energy output resulting in quicker starting improved throttle response and more high RPM power. Designed to work with Points style and Breakerless electronic ignition systems. Heavy duty black Alkyd tower provides in flashover in protection to primary terminals. ACCEL Yellow can. 42000 volts effective up to 6500 RPM 1.4 ohms on the primary
Product Features:
See More
Product Features:
- Chrome Plated
- 42000 Volts
- Effective To 6500 RPM
- Improved Throttle Response
- Higher RPM Power
- Can Finished In Yellow
Earls Performance Product – Brake Bleeder Screws (Part No.280029ERL)
from
$46.99
Brake Bleeder Screws
Earls Performance Product – Brake Bleeder Screws (Part No.280035ERL)
from
$39.99
Brake Bleeder Screws
Edelbrock – Performer 1400 Carburetor: 600 CFM, 4 Barrel, Square Bore, Electric Choke Inlet (Part No.1400)
from
$523.99
The Edelbrock 1400 Performer Series 600 CFM electric choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characterist
Product Features:
See More
Product Features:
- Edelbrock products offer improved performance and aesthetics for a broad array of vehicles and engines. ‘Proven performance’ is the philosophy by which Edelbrock was founded and it continues to this day with the highest standards for performance and quali
- Electric Choke
- 4 Barrel Count
- Square Bore
- Electric Choke Installed from Factory
- Smooth Secondary Transition
- Includes Only Timed Vacuum Port
- Includes EGR ; Fuel Vapor Outlet
Edelbrock – Performer Carburetor #9906 600 CFM With Electric Choke, Satin Finish (Non-EGR) (Part No.9906)
from
$414.99
Burnished aluminum. GM/MAC- style throttle linkage. Electric choke installed from factory. Easy tuning with 2 piece design. Smooth secondary transition. Both timed for full vacuum ports. Includes PCV outlet.
See More
Edelbrock – Performer Carburetor #9907 750 CFM With Manual Choke, Satin Finish (Non-EGR) (Part No.9907)
from
$407.99
Product Features:
See More
- Satin Finish
- 4 Barrel
- Annular Booster Type
- Manual Choke Type
- 750 cfm Maximum Flow Rating
Edelbrock – Performer 1403 Carburetor: 500 CFM, 4 Barrel, Square Bore, Electric Choke Inlet (Part No.1403)
from
$518.99
The Edelbrock 1403 Performer Series 500 CFM electric choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characterist
Product Features:
See More
Product Features:
- Edelbrock products offer improved performance and aesthetics for a broad array of vehicles and engines. ‘Proven performance’ is the philosophy by which Edelbrock was founded and it continues to this day with the highest standards for performance and quali
- Electric Choke
- 4 Barrel Count
- Square Bore
- Smooth Secondary Transition
- Both Timed and Full Vacuum Ports
- Includes PCV Outlet
Holley – Street Carburetor: 600 CFM, Electric Choke, 4 Barrel, Square Bore, Single Inlet, Shiny (Part No.0-80457S)
from
$499.99
Holley’s new 0-80457SA is constructed from aluminum which compared to its zinc counterpart equates to a weight savings of 40%! Holley’s aluminum 0-80457SA will hold its shine longer and also can be hand polished for a custom look! Its 600 CFM of airflow,
Product Features:
See More
Product Features:
- Vibratory Polished For Good Looks
Holley – Prem Street Carbs (Avengers) (Part No.0-80570)
from
$699.99
Square flange bolt pattern. Performance calibrated. The ultimate vacuum secondary street performance upgrade.
Product Features:
See More
Product Features:
- Vibratory Polished For Good Looks
- Optimized Street Calibration That Works Out Of The Box
- Factory Preset Electric Choke For Easy Startups
- Quick Change Vacuum Housing Cap To Tune For Performance/Fuel Econ
- No Unnecessary Trips Back To The Parts Store
- Limited Lifetime Warranty
- 100% Wet-Flow Tested To Assure It Arrives Ready To Run
- Street Ready; Out Of The Box
Holley – Street Carburetor: 670 CFM, Electric Choke, 4 Barrel, Square Bore, Dual Inlet, Shiny (Part No.0-80670)
from
$682.99
Square flange bolt pattern. Performance calibrated. The ultimate vacuum secondary street performance upgrade.
Product Features:
See More
Product Features:
- Vibratory Polished For Good Looks
- Optimized Street Calibration That Works Out Of The Box
- Factory Preset Electric Choke For Easy Startups
- Quick Change Vacuum Housing Cap To Tune For Performance/Fuel Econ
- No Unnecessary Trips Back To The Parts Store
- Limited Lifetime Warranty
- 100% Wet Flow Tested By Holley Technicians
- Arrives Ready To Run
Upgrade your 1972 Cadillac Fleetwood with Top-Quality Performance and Racing Products
When it comes to maintaining or upgrading your 1972 Cadillac Fleetwood, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Cadillac or enhancing its overall performance, Performance and Racing Products are key to keeping your Fleetwood functioning at its best. At Advance Auto Parts, we offer a wide selection of 47 Performance and Racing Products for the 1972 Cadillac Fleetwood, designed to meet your needs without breaking the bank.
From
Performance Fuel System
replacements to
Performance Engines
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 1972 Cadillac Fleetwood at great prices.
Our Performance and Racing Products inventory for this model
ranges from just $10.99 to $949.99, with
an average price of $395.43.
Our 47 Performance and Racing Products in stock come from 10 trusted brands, so you’re sure to find the right part for your 1972 Cadillac Fleetwood without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1972 Cadillac Fleetwood, we stock popular OEM and aftermarket Performance and Racing Products from top names
like B & M, Accel, Holley, and more.
B & M Performance and Racing Products
start at just $340.99 and boast an impressive 4.1 stars average rating from customers.
Accel and Holley also bring quality to the table, with Performance and Racing Products available starting at $45.99, and at an average 4.1 stars rating.
With 393 customer reviews and counting, our 1972 Cadillac Fleetwood Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Batteries and Chargers, Fluids and Chemicals
and more to make sure your 1972 Cadillac Fleetwood is always ready to roll. We’re committed to providing you with everything you need to keep your Fleetwood in top shape, all in one place.
Start shopping confidently below for your 1972 Cadillac Fleetwood!
Best-Selling Performance Fuel Systems for 1972 Cadillac Fleetwoods
Enhance the driving experience in your Cadillac with 7 quality Performance Fuel System components, starting at $407.99.
Holley – Street Carburetor: 600 CFM, Electric Choke, 4 Barrel, Square Bore, Single Inlet, Shiny (Part No.0-80457S)
from
$499.99
Holley’s new 0-80457SA is constructed from aluminum which compared to its zinc counterpart equates to a weight savings of 40%! Holley’s aluminum 0-80457SA will hold its shine longer and also can be hand polished for a custom look! Its 600 CFM of airflow,
Product Features:
See More
Product Features:
- Vibratory Polished For Good Looks
Holley – Street Carburetor: 670 CFM, Electric Choke, 4 Barrel, Square Bore, Dual Inlet, Shiny (Part No.0-80670)
from
$682.99
Square flange bolt pattern. Performance calibrated. The ultimate vacuum secondary street performance upgrade.
Product Features:
See More
Product Features:
- Vibratory Polished For Good Looks
- Optimized Street Calibration That Works Out Of The Box
- Factory Preset Electric Choke For Easy Startups
- Quick Change Vacuum Housing Cap To Tune For Performance/Fuel Econ
- No Unnecessary Trips Back To The Parts Store
- Limited Lifetime Warranty
- 100% Wet Flow Tested By Holley Technicians
- Arrives Ready To Run
Edelbrock – Performer Carburetor #9906 600 CFM With Electric Choke, Satin Finish (Non-EGR) (Part No.9906)
from
$414.99
Burnished aluminum. GM/MAC- style throttle linkage. Electric choke installed from factory. Easy tuning with 2 piece design. Smooth secondary transition. Both timed for full vacuum ports. Includes PCV outlet.
See More
Edelbrock – Performer 1400 Carburetor: 600 CFM, 4 Barrel, Square Bore, Electric Choke Inlet (Part No.1400)
from
$523.99
The Edelbrock 1400 Performer Series 600 CFM electric choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characterist
Product Features:
See More
Product Features:
- Edelbrock products offer improved performance and aesthetics for a broad array of vehicles and engines. ‘Proven performance’ is the philosophy by which Edelbrock was founded and it continues to this day with the highest standards for performance and quali
- Electric Choke
- 4 Barrel Count
- Square Bore
- Electric Choke Installed from Factory
- Smooth Secondary Transition
- Includes Only Timed Vacuum Port
- Includes EGR ; Fuel Vapor Outlet
Holley – Prem Street Carbs (Avengers) (Part No.0-80870)
from
$699.99
Square flange bolt pattern. Performance calibrated. The ultimate vacuum secondary street performance upgrade.
Product Features:
See More
Product Features:
- Vibratory Polished For Good Looks
- Optimized Street Calibration That Works Out Of The Box
- Factory Preset Electric Choke For Easy Startups
- Quick Change Vacuum Housing Cap To Tune For Performance/Fuel Econ
- No Unnecessary Trips Back To The Parts Store
- Limited Lifetime Warranty
- 100% Wet Flow Tested By Holley Technicians
- Arrives Ready To Run
Holley – Prem Street Carbs (Avengers) (Part No.0-80570)
from
$699.99
Square flange bolt pattern. Performance calibrated. The ultimate vacuum secondary street performance upgrade.
Product Features:
See More
Product Features:
- Vibratory Polished For Good Looks
- Optimized Street Calibration That Works Out Of The Box
- Factory Preset Electric Choke For Easy Startups
- Quick Change Vacuum Housing Cap To Tune For Performance/Fuel Econ
- No Unnecessary Trips Back To The Parts Store
- Limited Lifetime Warranty
- 100% Wet-Flow Tested To Assure It Arrives Ready To Run
- Street Ready; Out Of The Box
Edelbrock – Performer Carburetor #9907 750 CFM With Manual Choke, Satin Finish (Non-EGR) (Part No.9907)
from
$407.99
Product Features:
See More
- Satin Finish
- 4 Barrel
- Annular Booster Type
- Manual Choke Type
- 750 cfm Maximum Flow Rating
Most Popular 1972 Cadillac Fleetwood Performance Engines
Customize your Cadillac with 24 Performance Engines products
like Performance Intake Manifolds,
Performance Engine Timing Sets and Components, and
Performance Engine Camshafts, all
priced under $949.99.
B & M – Tork Master 2400 (Part No.20404)
from
$373.99
Torque Converter – Tork Master 2400 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) APPLICATION: Tork Master 2400 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) The Tork Master is B&M’s lowest cost performance torque converter. The Tork Master is an excellent all-around performance street converter. The best value priced street converters available, Tork Master converters come with a new precision pump drive tube and all are pressure tested and fully balanced. The Tork Master torque converter is not recommended for big block or supercharged applications. New alloy steel pump drive tube. Needle thrust bearing when factory equipped. New thrust washer between turbine and cover when required. Due to torque converter core availability, the actual converter size may vary but performance functionality will be as advertised.
Product Features:
See More
Product Features:
- New Precision Pump Drive Tube
- Pressure Tested
- Fully Balanced
- Needle Thrust Bearing
- New Thrust Washer
B & M – Performance Torque Converter for GM TH400, 350, & 375 Transmissions (Part No.20400)
from
$329.99
Torque Converter – Tork Master 2000 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) APPLICATION: Tork Master 2000 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) The Tork Master is B&M’s lowest cost
Product Features:
See More
Product Features:
- New Precision Pump Drive Tube
- Pressure Tested
- Fully Balanced
- Needle Thrust Bearing
- New Thrust Washer
B & M – Holeshot 3600 (Part No.20425)
from
$949.99
HoleShot 3600 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) APPLICATION: HoleShot 3600 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) A higher than stock stall speed as delivered by the Holeshot converter will provide several advantages and benefits in vehicles with modified engines. Many modifications, particularly big cams, tend to reduce low end power and torque. The high stall converter allows the engine to launch the car at higher rpm where more torque is available. The Holeshot is generally a very good choice for the typical street machine that is looking for better launch capability and more strength. Street rods with modified engines will also benefit from a Holeshot converter. If your vehicle is equipped with a plate type nitrous system, you will need a Nitrous Holeshot!! Stall speed listings are based on engines producing 230lb. ft. of torque at 2,500 rpm. More torque at 2,500 rpm will give you more stall speed, less torque at 2,500 rpm will give you less stall speed than the stall speed ratings indicated. Furnace brazed impeller. New precision steel alloy pump drive tube. New heavy duty needle bearing between stator and impeller (not a thrust washer). Needle bearing between stator and turbine. Furnace brazed turbine. Dual pattern drive lugs on some GM Holeshots. New turbine hub. New springs and rollers in stator.
Product Features:
See More
Product Features:
- Furnace Brazed Impeller
- Steel Alloy Pump Drive Tube
- Heavy Duty Needle Bearing
- Between Stator and Turbine
- Furnace Brazed Turbine
- Dual Pattern Drive Lugs
- New Turbine Hub
- New Springs/Rollers In Stator
B & M – Holeshot 3000 (Part No.20413)
from
$899.99
HoleShot 3000 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) APPLICATION: HoleShot 3000 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) A higher than stock stall speed as delivered by the Holeshot c
Product Features:
See More
Product Features:
- Furnace Brazed Impeller
- Steel Alloy Pump Drive Tube
- Heavy Duty Needle Bearing
- Between Stator and Turbine
- Furnace Brazed Turbine
B & M – Torque Converter, Nitrous Holeshot 3000 (Part No.20481)
from
$899.99
Nitrous Holeshot Converters are Built with the same features as the other B&M Holeshots, with the addition of anti-balloon plates. The anti-balloon plates will allow these converters to stand up to the instant horsepower nitrous delivers.
Product Features:
See More
Product Features:
- 2800-3200 RPM
- Small And Big Blocks
- Serious Performance
- Furnace Brazed
- Fully Balanced
B & M – Torque Converter, Nitrous Holeshot 3600 (Part No.20482)
from
$749.99
Nitrous Holeshot Converters are Built with the same features as the other B&M Holeshots, with the addition of anti-balloon plates. The anti-balloon plates will allow these converters to stand up to the instant horsepower nitrous delivers.
Product Features:
See More
Product Features:
- 3400-3800 RPM
- Small And Big Blocks
- Serious Performance
- Furnace Brazed
- Fully Balanced
Competition Cams – Magnum 224/224 Hydraulic Flat Cam for Cadillac 425, 472, 500 (Part No.94-306-5)
from
$702.99
Magnum 224/224 Hydraulic Flat Cam for Cadillac 425, 472, 500
Competition Cams – Mutha’ Thumpr 234/249 Hydraulic Flat Cam for Cadillac 425, 472, 500 (Part No.94-601-5)
from
$679.99
Mutha’ Thumpr 234/249 Hydraulic Flat Cam for Cadillac 425, 472, 500
Competition Cams – 7 Degree Steel Retainer Set of 100 for Chevrolet/Buick V6 with 1.250" OD Spring (Part No.742-100)
from
$636.99
7 Degree Steel Retainer Set of 100 for Chevrolet/Buick V6 with 1.250" OD Spring
Competition Cams – High Energy 218/218 Hydraulic Flat Cam for Cadillac 425, 472, 500 (Part No.94-304-5)
from
$625.99
High Energy 218/218 Hydraulic Flat Cam for Cadillac 425, 472, 500
Competition Cams – High Energy 212/212 Hydraulic Flat Cam for Cadillac 425, 472, 500 (Part No.94-302-5)
from
$614.99
High Energy 212/212 Hydraulic Flat Cam for Cadillac 425, 472, 500
Edelbrock – Performer Intake Manifold for 1968-1976 Cadillac 472-500, Satin Finish (Part No.2115)
from
$553.99
Product Features:
See More
- Idle-5500 RPM Range
- Dual Plane Type-4150 Style Flange
- 4.88 in. Front Height, 5.34 in. Center Height, 5.81 in. Rear Height
- Satin Finish
- Made In The USA
B & M – Holeshot 2400 (Part No.20412)
from
$549.99
HoleShot 2400 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) Application: HoleShot 2400 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) A higher than stock stall speed as delivered by the Holeshot c
Product Features:
See More
Product Features:
- Furnace Brazed Impeller
- Steel Alloy Pump Drive Tube
- Heavy Duty Needle Bearing
- Between Stator and Turbine
- Furnace Brazed Turbine
Competition Cams – 16 Springs (Part No.26986-16)
from
$401.99
16 Springs
Competition Cams – 16 Springs (Part No.26981-16)
from
$336.99
16 Springs
Competition Cams – ENGINE TIMING SET (Part No.2139)
from
$187.99
ENGINE TIMING SET
Competition Cams – 10 Degree Steel Retainers for 26120 Beehive Springs (Part No.795-16)
from
$123.99
10 Degree Steel Retainers for 26120 Beehive Springs
Competition Cams – 1 Spring (Part No.26981-1)
from
$20.99
1 Spring
Competition Cams – Performance Series Solid Lifter for Cadillac, Chevrolet, Oldsmobile and Pontiac (Part No.2900-1)
from
$15.99
Performance Series Solid Lifter for Cadillac, Chevrolet, Oldsmobile and Pontiac
Competition Cams – High Energy Hydraulic Flat Lifter for Buick 181-252/350-455 and Cadillac 472-500 (Part No.869-1)
from
$13.99
High Energy Hydraulic Flat Lifter for Buick 181-252/350-455 and Cadillac 472-500
Competition Cams – Engine Valve Spring (Part No.981-1)
from
$11.99
Engine Valve Spring
Competition Cams – 10 Degree Superlock Steel Retainer for 1.437"-1.500" OD Valve Spring (Part No.740-1)
from
$10.99
10 Degree Superlock Steel Retainer for 1.437"-1.500" OD Valve Spring
Competition Cams – 10 Degree Steel Retainer for 26120 Beehive Spring (Part No.795-1)
from
$10.99
10 Degree Steel Retainer for 26120 Beehive Spring
Competition Cams – 7 Steel Retainer for SBC, Chevrolet/Buick V6 with 1.250" OD Spring (Part No.742-1)
from
$10.99
7 Steel Retainer for SBC, Chevrolet/Buick V6 with 1.250" OD Spring
Top Picks for 1972 Cadillac Fleetwood Performance Distributors
Upgrade Cadillac Fleetwoods with top-quality Performance Distributors parts, including 1 OEM and aftermarket selections for your 1972 model.
MSD Ignition – Distributor; Cadillac V8 with Vacuum Advance (Part No.8363)
from
$649.99
Cadillac cruisers will be excited about this new Pro-Billet distributor for the 368, 425, 472 and 500 cubic inch engines. The distributor begins life as a billet of 6061-T6 aluminum before being CNC-machined to precise dimensions. The sturdy, flex-free housing is fitted with a sealed ball-bearing and long sintered bushing for high-rpm accuracy. MSD’s race proven magnetic pick-up supplies a trigger signal that is accurate to within one degree at any RPM. Mounted above this pick-up is an adjustable mechanical advance and is supplied with different springs and stop bushings for a number of curves. For street cruising economy, as if there’s any such thing in a caddy, there is a vacuum advance canister.
Product Features:
See More
Product Features:
- Designed for Cadillac 368/425/472 and 500 ci. engines
- Must Be Used w/An MSD Ignition Control
- Supplied w/HEI style distributor cap/rotor (accepts Cap-A-Dapts)
- Special oil tract improves lubrication to the dist./cam gear
- Mech. advance assem. can be locked out for crank trigger systems
- QPQ coated polished steel shaft; guided by sealed ball bearings
- Maintenance-free magnetic pickup and precision reluctor
- Creates stable trigger signals throughout the rpm range
- CNC machined billet aluminum housing and billet aluminum base
- Vacuum advance canister for improved economy (can be locked out)
- Easy-to-adjust mech. advance w/supplied springs and stop bushings
- CARB E.O. Approved
In-Demand Performance Transmissions for 1972 Cadillac Fleetwoods
Select from 1 premium Performance Transmissions parts for your 1972 Cadillac Fleetwood.
Lakewood – Trans Mount: Urethane-Chevy (Part No.24350)
from
$97.99
Constructed of durable polyurethane to handle the stress oh high horsepower. Absorbs vibration and lasts longer than rubber Features unique built-in safety lock to keep from separating under high torque loads. Ideal for use on street or strip applications. Complete with grade-8 mounting hardware.
Product Features:
See More
Product Features:
- Durable Polyurethane
- Absorbs Vibration
- Last Longer Than Rubber
- Built-In Safety Lock
Most Sold 1972 Cadillac Fleetwood Performance Ignition Products
Explore our best-selling Cadillac parts for the 1972 Fleetwood among 5 OEM and aftermarket options starting from $45.99.
Mallory – Mallory Kit: Unil Conv: Delco: V8 (Part No.501)
from
$149.99
Put an end to high maintenance point ignition systems by installing a proven Mallory Unilite ignition conversion kit. Features at a glance, improves performance and fuel efficiency, easy to install with simple hand tools, reduced maintenance and is available for all popular 12-volt negative ground domestic cars and trucks.
Product Features:
See More
Product Features:
- Easy Installation
- Improved Fuel Economy
- Reduced Maintenance
- Accurate Timing
- Improved Performance
- Provides A Simple Conversion
- No Moving Parts To Wear Out
Accel – Super Stock Replacement Coil for Improved Performance, Starting, and Power (Part No.8140)
from
$45.99
Excellent high performance replacement for import and domestic vehicles with canister type oil filled coil. Re-engineered windings for even higher energy output resulting in quicker starting improved throttle response and more high RPM power. Designed to work with Points style and Breakerless electronic ignition systems. Heavy duty black Alkyd tower provides in flashover in protection to primary terminals. ACCEL Yellow can. 42000 volts effective up to 6500 RPM 1.4 ohms on the primary
Product Features:
See More
Product Features:
- 42000 Volts
- Effective To 6500 RPM
- Quicker Starting
- Improved Throttle Response
- Higher RPM Power
- Can Finished In Yellow
Accel – Super Stock Coil Chrome (Part No.8140C)
from
$51.99
Excellent high performance replacement for import and domestic vehicles with canister type oil filled coil. Re-engineered windings for even higher energy output resulting in quicker starting improved throttle response and more high RPM power. Designed to work with Points style and Breakerless electronic ignition systems. Heavy duty black Alkyd tower provides in flashover in protection to primary terminals. ACCEL Yellow can. 42000 volts effective up to 6500 RPM 1.4 ohms on the primary
Product Features:
See More
Product Features:
- Chrome Plated
- 42000 Volts
- Effective To 6500 RPM
- Improved Throttle Response
- Higher RPM Power
- Can Finished In Yellow
Accel – Supercoil (Part No.140001)
from
$114.99
Engineered for faster rise time, longer spark duration and increased performance. Unique design with premium grade wire, special low resistance, high turns ratio windings. Produces higher spark energy with breakerless electronic ignition systems. For points application the supplied 0.85 ohm ballast resistor must be used in conjunction with the vehicle original ballast resistor, if so equipped. Oversized molded case with integral cooling fins and high capacity oil filled construction provide high thermal conductivity ensuring cool operation and long life. Extra tall tan Alkyd tower and integral voltage dam eliminate “flashover” to primary terminals. Comes complete with mounting hardware and 0.85 ohm ballast resistor. Effective up to 6,500 RPM.
Product Features:
See More
Product Features:
- Oil Filled For Better Cooling
- Optimized Low Resistance
- Silicon Magnetic Steel E-Core
- Higher Energy/Voltage Outputs
- Quicker Starts
- Improved Idle Quality
- Resists Shock And Vibration
- Resists Corrosion
Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)
from
$199.99
Universal street and strip. For street-driven vehicles with breaker point ignition or OE electronic ignition. Delivers optimum performance when used with these Mallory ignition products: UNILITE (R) distributor with a HYFIRE (R) capacitive discharge ignition, magnetic breaker less distributor with a HYFIRE (R) capacitive discharge ignition, or dual point distributor. Effective to approximately 6500 RPM when used with a point type distributor (depending on engine combination). Effective to approximately 8000 RPM when used with a Mallory HYFIRE electronic ignition control (depending on engine combination).
Product Features:
See More
Product Features:
- Glass Filled Polyester Case
- Longer Spark Duration
- Increased Performance
- No Energy Loss Due To Arcing
- Includes Brass Contact Terminal
Top-Rated Performance and Racing Products Brands For Your 1972 Cadillac Fleetwood
Shop for the best-rated brands offering Performance and Racing Products and other products for your 1972 Cadillac Fleetwoods. Below you’ll find some of our best rated Performance and Racing Products from B & M, Accel, and Holley, and more. Performance and Racing Products from these brands that fit a 1972 Fleetwood start at just $45.99 and are rated as high as 4.1 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.
Popular B & M 1972 Cadillac Fleetwood Performance and Racing Products
When it comes to maintaining or upgrading your 1972 Cadillac Fleetwood, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. B & M ticks all of those boxes. We offer a wide selection of B & M Performance and Racing Products, specifically designed for the 1972 Cadillac Fleetwood. With over 3 B & M brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $340.99, with an average price of just $414.32. Plus, with over 3 customer reviews and an average rating of 4.1 stars, you can trust that our B & M Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$373.99
(1)
Tork Master 2400
“The B&M 2400 stall converter was a great choice for my application. It works well on the street and track, increased performance by leaps and bounds. ”
from
$340.99
(1)
Automatic Shifter, StarShifter
“while I was looking this shifter over and found it wouldn’t work for my application, I found it to be as beautiful as the B&M shifter I had in my othe”
from
$527.99
(1)
Automatic Shifter – Megashifter – Universal
“its was pretty easy to install if u have any type of knowlegde of cars it should not be difficult at all and the shifting is awesome just be careful w”
Popular Accel 1972 Cadillac Fleetwood Performance and Racing Products
Accel auto parts is one of the highest quality Performance and Racing Product brands in the market. Any 1972 Cadillac Fleetwood owner should feel confident when installing genuine Accel parts in their vehicle. To ensure the best fit and performance for your 1972 Fleetwood, Advance Auto Parts carries a full inventory of 2 Accel Performance and Racing Products. Plus you will be keeping your Cadillac in peak condition while saving money because prices on these Accel Performance and Racing Products range from $45.99 to $51.99, plus, with more than 63 customer reviews and an impressive 4.1 stars average rating, you can be confident the Fram Performance and Racing Products below will deliver on both quality and value.
from
$45.99
(54)
Super Stock Replacement Coil for Improved Performance, Starting, and Power
“Works just fine”
FAQs for 1972 Cadillac Fleetwood Performance and Racing Products
Which Performance and Racing Products are best-sellers for 1972 Cadillac Fleetwoods?
Out of 47 Performance and Racing Products that fit 1972 Cadillac Fleetwoods, the following parts are the top sellers:
- Street Carburetor: 600 CFM, Electric Choke, 4 Barrel, Square Bore, Single Inlet, Shiny (6340008) – $499.99
- Street Carburetor: 670 CFM, Electric Choke, 4 Barrel, Square Bore, Dual Inlet, Shiny (6340019) – $682.99
- Automatic Shifter, Z-Gate (6900216) – $299.99
What’s the price range for 1972 Cadillac Fleetwood Performance and Racing Products?
Performance and Racing Product prices for the 1972 Cadillac Fleetwood start at $10.99 and go up to $949.99 for the most premium parts.
What’s the average price of a Performance and Racing Product for a 1972 Cadillac Fleetwood?
The average price for Performance and Racing Products for the 1972 Cadillac Fleetwood is $395.43. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Performance and Racing Products for other Cadillac Fleetwood model years?
What are the cheapest Performance and Racing Products for my 1972 Cadillac Fleetwood?
The cheapest 1972 Cadillac Fleetwood Performance and Racing Products we carry in stock are:
- 10 Degree Superlock Steel Retainer for 1.437"-1.500" OD Valve Spring (50289470) – $10.99
- 10 Degree Steel Retainer for 26120 Beehive Spring (50289146) – $10.99
- 7 Steel Retainer for SBC, Chevrolet/Buick V6 with 1.250" OD Spring (50289502) – $10.99
- Engine Valve Spring (50286858) – $11.99
- High Energy Hydraulic Flat Lifter for Buick 181-252/350-455 and Cadillac 472-500 (50286568) – $13.99
What are the top-rated Performance and Racing Products that fit the 1972 Cadillac Fleetwood?
Out of 393 reviews by customers, our 1972 Cadillac Fleetwood Performance and Racing Products have an average customer rating of . These are some of the highest-rated Performance and Racing Product types for the 1972 Cadillac Fleetwood and their top-rated products:
- Performance Shifters
- Automatic Shifter, StarShifter (6274609) – $340.99
- Automatic Shifter – Megashifter – Universal (6900895) – $527.99
- Automatic Shifter, Z-Gate (6900216) – $299.99
- Performance Ignition Products
- Automatic Shifter, StarShifter (6274609) – $340.99
- Automatic Shifter – Megashifter – Universal (6900895) – $527.99
- Automatic Shifter, Z-Gate (6900216) – $299.99
- Performance Engines
- Automatic Shifter, StarShifter (6274609) – $340.99
- Automatic Shifter – Megashifter – Universal (6900895) – $527.99
- Automatic Shifter, Z-Gate (6900216) – $299.99
What types of Performance and Racing Products do you sell for my 1972 Cadillac Fleetwood?
As of 11/2/25, these are some of the most in-demand types of Performance and Racing Products for a 1972 Cadillac Fleetwood:
Can I get help with 1972 Cadillac Fleetwood Performance and Racing Product orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Cadillac Performance and Racing Products and more.
What is your return policy for Cadillac Fleetwood Performance and Racing Products?
Advance Auto Parts keeps returns simple. For new Cadillac Fleetwood Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
