1972 Buick Sportwagon Performance and Racing Products

Essential Performance and Racing Products for 1972 Buick Sportwagons

Accel – Supercoil (Part No.140001)

Supercoil

from

$105.99
Engineered for faster rise time, longer spark duration and increased performance. Unique design with premium grade wire, special low resistance, high turns ratio windings. Produces higher spark energy with breakerless electronic ignition systems. For points application the supplied 0.85 ohm ballast resistor must be used in conjunction with the vehicle original ballast resistor, if so equipped. Oversized molded case with integral cooling fins and high capacity oil filled construction provide high thermal conductivity ensuring cool operation and long life. Extra tall tan Alkyd tower and integral voltage dam eliminate “flashover” to primary terminals. Comes complete with mounting hardware and 0.85 ohm ballast resistor. Effective up to 6,500 RPM.

Product Features:
  • Oil Filled For Better Cooling
  • Optimized Low Resistance
  • Silicon Magnetic Steel E-Core
  • Higher Energy/Voltage Outputs
  • Quicker Starts
  • Improved Idle Quality
  • Resists Shock And Vibration
  • Resists Corrosion
See More

Accel – Custom Fit Spark Plug Wire Set (Part No.8843)

Custom Fit Spark Plug Wire Set

from

$112.99
These ACCEL wire sets are custom tailored for true street and strip performance use. Features oversize 8.8 mm ultra performance wires and spark plug boots, 550 degrees Fahrenheit double silicone construction with fiberglass braid. Spiral wound steel core conductor.

Product Features:
  • 8.8mm Graphite Suppression
  • Silicone Spark Plug Boots
  • 550 Degree Double Silicone Construction
  • Fiberglass Braid
  • Carbon/Graphite Core
  • Magnetic Suppression
  • Fiberglass/Kevlar Core
  • 500 Ohms Resistance
See More

Mr. Gasket – Fuel Pump Block-Off Plate (Part No.1515)

Fuel Pump Block-Off Plate

from

$12.99
This is what you need when changing your manual fuel pump to electric. It blocks the hole that remains when you remove the mechanical fuel pump from the engine to keep the oil inside. This plate is precision machined and is chrome plated.

Product Features:
  • Chrome Plated Steel
  • Comes With Gasket
See More

Mallory – Distributor Condenser (Part No.401)

Distributor Condenser

from

$17.09
Distributor Condenser

Motive Gear – Performance Differential Ring and Pinion (Part No.G888390)

Performance Differential Ring and Pinion

from

$241.99


Product Features:
  • GM12BL 8.875 R/P 3.90 CAR
See More

Edelbrock – Performer Carb/Plate Nitrous Systems for Spread-Bore (Q-Jet)Carbs (50-75-100 Hp) (Part No.70002)

Performer Carb/Plate Nitrous Systems for Spread-Bore (Q-Jet)Carbs (50-75-100 Hp)

from

$684.99


Product Features:
  • Designed For Carbureted V6 And V8 Engines
  • Use With Single Or Dual Plane Manifolds
  • Power Increases From 50 to 100 HP
  • Plate Systems are Easy to Install
  • Precision EDM Machined Spray Bars Maximize Flow
  • Option of Silver Powder Coated or Polished Bottle
  • Recommend Ignition Retard ; Upgraded Fuel System
  • Requires Use of Premium Fuel
See More

Edelbrock – CARBURETOR (Part No.14064)

CARBURETOR

from

$541.99
Product Features:
  • EnduraShine Finish
  • GM/AMC-Style Throttle Linkage
  • Electric Choke Installed from Factory
  • Easy Tuning with 2-Piece Design
  • Smooth Secondary Transition
  • Both Timed and Full Vacuum Ports
  • Includes PCV Outlet
See More

Mr. Gasket – Alternator Bracket (Part No.9850)

Alternator Bracket

from

$25.99
Hold your alternator securely in place with Mr. Gasket chrome alternator bracket. Chrome plated heavy gauge steel for long lasting good looks. Must be used with #9852.

Product Features:
  • Chrome Plated Steel
  • F-Style
  • Heavy Gauge Steel Construction
  • Fits Small Block Chevy 265-400 CID
  • Must Be Used With Part 9852
See More

Mr. Gasket – High Performance 180 Degree Thermostat for Increased Flow (Part No.4364)

High Performance 180 Degree Thermostat for Increased Flow

from

$26.99
Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.

Product Features:
  • Opens At 180 Degrees
  • Designed to Resist Large Variations of Coolant Pressure at High RPM
  • Fully Opens at Correct Temperature Consistently Regardless of Engine RPM
  • For High Performance Street, Drag Race, and Oval Track
  • Copper & Brass Construction – Resists Corrosion
  • High Flow
See More

Powertrax – Lock Right Locker (Part No.1910-LR)

Lock Right Locker

from

$376.99
The Powertrax Lock-Right ultra-strength alloy locker’s straight-line performance is equal to a solid spool, but automatically unlocks in turns. Best suited for extreme off-road to severe on-road use, Powertrax Lock Right lockers replace the spider gears in your open differential carrier using basic tools and without affecting your ring and pinion settings. The whole job can be done in your driveway in a couple of hours, pin included! Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.
  • Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles.
  • Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction.
  • Powertrax® = Extreme Traction Systems!
  • See More

    Accel – Distributor Cap And Rotor Kit (Part No.8124)

    Distributor Cap And Rotor Kit

    from

    $48.49


    Product Features:
    • Heavy Duty Cap and Rotor Kit
    • With Brass Inserts
    See More

    Mallory – Unilite Ignition Module (Part No.605)

    Unilite Ignition Module

    from

    $85.29
    Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.

    Product Features:
    • Service Part
    • No Moving Parts To Wear Out
    • Self Contained Unit
    • Can Drive OEM
    • Can Drive High Performance Ignition Coils
    See More

    Mr. Gasket – Water Neck (Part No.2557)

    Water Neck

    from

    $27.49
    Precision die cast, these water necks are first polished to a high luster, then chrome plated. Features an O-ring style seal to prevent water leaks. Comes with O-ring gasket and mounting bolts.

    Product Features:
    • Complete with o-rings and mounting bolts
    • Features an o-ring style seal to prevent water leaks
    • Chrome plated
    • 1/2″ NPT port can be used for various coolant temp related sensors or switches
    See More

    Edelbrock – Performer Carb/Plate Nitrous Systems for Square-Bore Carbs (50-75-100 Hp) (Part No.70001)

    Performer Carb/Plate Nitrous Systems for Square-Bore Carbs (50-75-100 Hp)

    from

    $724.99
    The Edelbrock Performer Nitrous Plate System #70001 is designed to increase your power from 50-100 horsepower. Edelbrock Nitrous systems are simple to install with a 1/2″ thick aluminum plate that fits between the carburetor and the intake manifold. Edelb
    See More

    Mr. Gasket – Thermocap Radiator Cap (Part No.2476BK)

    Thermocap Radiator Cap

    from

    $48.09
    The fastest, easiest way to know exactly when it’s safe to open your radiator cap. ThermoCap, with its built-in calibrated thermometer, indicates the coolant temperature.

    Product Features:
    • Indicates coolant temperature
    • Helps prevent coolant injuries
    • Fahrenheit and centigrade readings
    • Color-coded temperature ranges
    • Integrated coolant reclamation valve
    • Improves under-hood appearance
    • Chromed crown with a colored trim ring
    See More

    MSD Ignition – Distributor; Buick 455 V8; Ready-to-Run (Part No.8552)

    Distributor; Buick 455 V8; Ready-to-Run

    from

    $647.99
    If you’re looking for a performance distributor for your Buick or Nailhead your search is over! MSD’s Ready-to-Run distributor incorporates a magnetic pickup that never wears out! Plus, the distributor has a built in ignition module so there is no need to mount an external MSD Ignition control. Not only do you get the benefits of electronic triggering, but your engine will awaken with the powerful sparks from the ignition module. This module delivers up to 7.5 A to the coil creating a stout inductive spark. This improves combustion of the fuel mixture resulting in quick starts, a smooth idle and great performance! Another advantage of an MSD distributor is the accurate and adjustable mechanical advance assembly. The advance curve is easy to adjust with different advance springs and stop bushings which are included. To top it off there is a vacuum advance canister and MSD’s strong cap and wire retainer.

    Product Features:
    • Simple and clean three wire installation
    • CARB E.O. Approved
    • Does not require an MSD Ignition Control
    • Supplied w/HEI style distributor cap/rotor (accepts Cap-A-Dapts)
    • Mech. advance assem. can be locked out for crank trigger systems
    • QPQ coated polished steel shaft; guided by sealed ball bearings
    • Maintenance-free magnetic pickup and precision reluctor
    • Creates stable trigger signals throughout the rpm range
    See More

    Hurst – Manual Competition Plus Shifter (Part No.3917307)

    Manual Competition Plus Shifter

    from

    $548.99
    The industry standard for over 30 years, this shifter offers state of the art transmission control for popular 4 speed manual transmissions. Dedicated applications assure a custom fit to a wide variety of vehicles having factory consoles.

    Product Features:
    • High Ratio Pivot Mechanism
    • Adjustable Bias Spring Loads
    • Adjustable Stops
    • Chrome Plated Steel Bolt On Stick
    • Easy Installation
    See More

    B & M – Transpak For 65-87 TH400 Transmission (Part No.20228)

    Transpak For 65-87 TH400 Transmission

    from

    $141.99
    The B&M Transpak has all the features in the Shift Improver Kit, plus it provides additional driver manual control. Retain full automatic features and standard shift points with selector in Drive.

    Product Features:
    • Recalibrate Auto. Transmission
    • Optimum Performance
    • Select Your App. Mode
    • Improves Transmission Life
    • Trans. Removal Not Required
    • Downshift At Any Speed
    • Great For Trailer Towing
    • For Heavy Loads Driving Downhill
    See More

    Mallory – Mallory Kit: Unil Conv: Delco: V8 (Part No.501)

    Mallory Kit: Unil Conv: Delco: V8

    from

    $134.99
    Put an end to high maintenance point ignition systems by installing a proven Mallory Unilite ignition conversion kit. Features at a glance, improves performance and fuel efficiency, easy to install with simple hand tools, reduced maintenance and is available for all popular 12-volt negative ground domestic cars and trucks.

    Product Features:
    • Easy Installation
    • Improved Fuel Economy
    • Reduced Maintenance
    • Accurate Timing
    • Improved Performance
    • Provides A Simple Conversion
    • No Moving Parts To Wear Out
    See More

    Edelbrock – Sure Seat Valve Springs for Ford 429/460 V8 1969-1987 (Part No.5767)

    Sure Seat Valve Springs for Ford 429/460 V8 1969-1987

    from

    $111.99
    Complete kit includes retainers and locks. Springs made of highest quality spring wire. Springs precision wound to close tolerances. Includes superior quality steel retainers. Includes 7 degree heat-treated valve stem locks. Retainers and locks black oxide coated. Non-Rotator style: Dyno tested and street proven. Great match to Edelbrock camshaft kit.

    Product Features:
    • For Use With Cast Iron Heads
    • Springs Made of Highest Quality Spring Wire
    • Springs Precision Wound To Close Tolerances
    • Use with Original Equipment Heads Only
    See More

    B & M – Transmission Kit, Master Overhaul Kit For TH400 (Part No.21041)

    Transmission Kit, Master Overhaul Kit For TH400

    from

    $409.99
    These kits include all of the necessary components to rebuild your automatic transmission. OEM style gaskets included. Kits do not include overhaul instructions – please refer to factory shop manual for proper assembly procedures.

    Product Features:
    • Complete High Perf. Or Racing Trans. Overhaul
    • Includes Only OEM Valvebody Gaskets
    • Instructions Not Included
    See More

    Mr. Gasket – Ultra Seal: Competition Screw-In Rocker Arm Studs (Part No.1075)

    Ultra Seal: Competition Screw-In Rocker Arm Studs

    from

    $94.99
    Mr. Gasket competition screw-in rocker arm studs are manufactured from heat treated black oxide coated Grade 8 steel. Ideal for high performance street and race applications.

    Product Features:
    • Black Oxide Coated Grade 8 Steel
    • Kit Contains 16 Studs
    • Easy To Install
    • Heat Treated Steel
    • Prevents Stud Flexing
    • Black Plated Finish
    See More

    B & M – Tork Master 3000 (Part No.20402)

    Tork Master 3000

    from

    $499.99
    Torque Converter – Tork Master 3000 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) APPLICATION: Tork Master 3000 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) The Tork Master is B&M’s lowest cost performance torque converter. The Tork Master is an excellent all-around performance street converter. The best ‘value priced’ street converters available, Tork Master converters come with a new precision pump drive tube and all are pressure tested and fully balanced. The Tork Master torque converter is not recommended for big block or supercharged applications. New allow steel pump drive tube. Needle thrust bearing when factory equipped. New thrust washer between turbine and cover when required.

    Product Features:
    • New Precision Pump Drive Tube
    • Pressure Tested
    • Fully Balanced
    • Needle Thrust Bearing
    • New Thrust Washer
    • Washer Between Turbine and Cover
    See More

    FAG US – CUP (Part No.LM48510)

    CUP

    from

    $7.69
    CUP

    Hays – Power Train (Part No.85-110)

    Power Train

    from

    $641.99
    Matched assembly for maximum reliability. An excellent choice for high performance street applications.

    Product Features:
    • Built As Matched Assembly
    • Exceptional Performance
    • Exceptional Durability
    • Long Term Dependability
    • Designed for Street And Street Strip Applications
    See More

    Earls Performance Product – Brake Bleeder Screws (Part No.280029ERL)

    Brake Bleeder Screws

    from

    $40.99
    Brake Bleeder Screws

    FEL-PRO Performance – Cylinder Head Gasket: Steel Core Composite, Without Head Bolts (Part No.1125)

    Cylinder Head Gasket: Steel Core Composite, Without Head Bolts

    from

    $106.99
    Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

    Product Features:
    • PROPRIETARY COATING – Nonstick anti-friction coating seals small surface imperfections
    • NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
    • SUPERIOR SEAL – Precise embossed Printoseal sealing beads at all vital areas to eliminate leak paths
    • STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
    • DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
    See More

    Mr. Gasket – Ultra Seal: Head Gasket (Part No.5799G)

    Ultra Seal: Head Gasket

    from

    $68.99
    Mr. Gasket Ultra-Seal Head Gaskets are a five layer (graphite core/perforated steel outer layers) composite construction. The graphite core has excellent thermoconductivity (transfers heat) away from hot spots in head preventing gasket burn-out. They provide excellent stability, compressibility and high temperature endurance. A high temperature silicone coating ensures sealing of engine fluids. Compatible with cast iron or aluminum heads, they will not brinell (indent) aluminum cylinder heads. Suitable for high performance street, drag race and oval track use. Sold individually.brbrGasket Bore 4.130 inch, Compressed thickness 0.055 inch

    Product Features:
    • Five layer (graphite core/perforated steel outer layers) composite construction
    • Graphite core is excellent transfering heat away from hot spots in head preventing gasket burn-out.
    • Provides excellent stability, compressibility and high temperature endurance
    • Coated with high temperature silicone to ensure sealing of engine fluids
    • Will not brinell (indent) aluminum cylinder heads
    • For high performance street, drag race and oval track use
    • Compatible w/High Octane Fuel
    • Compatible With Exotic Fuel
    See More

    Upgrade your 1972 Buick Sportwagon with Top-Quality Performance and Racing Products

    When it comes to maintaining or upgrading your 1972 Buick Sportwagon, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Buick or enhancing its overall performance, Performance and Racing Products are key to keeping your Sportwagon functioning at its best. At Advance Auto Parts, we offer a wide selection of 78 Performance and Racing Products for the 1972 Buick Sportwagon, designed to meet your needs without breaking the bank. From Performance Exhaust Product replacements to Performance Ignition Products upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

    Affordable Prices and Wide Selection

    Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 1972 Buick Sportwagon at great prices. Our Performance and Racing Products inventory for this model ranges from just $7.69 to $1,138.99, with an average price of $392.68. Our 78 Performance and Racing Products in stock come from 14 trusted brands, so you’re sure to find the right part for your 1972 Buick Sportwagon without overspending.

    Top Brands and High Customer Satisfaction

    Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1972 Buick Sportwagon, we stock popular OEM and aftermarket Performance and Racing Products from top names like Mr. Gasket, Edelbrock, Accel, and more. Mr. Gasket Performance and Racing Products start at just $12.99 and boast an impressive 4 stars average rating from customers. Edelbrock and Accel also bring quality to the table, with Performance and Racing Products available starting at $48.49, and at an average 4 stars rating. With 429 customer reviews and counting, our 1972 Buick Sportwagon Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.

    Explore Related Parts and More

    While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Batteries and Chargers, Fluids and Chemicals and more to make sure your 1972 Buick Sportwagon is always ready to roll. We’re committed to providing you with everything you need to keep your Sportwagon in top shape, all in one place. Start shopping confidently below for your 1972 Buick Sportwagon!

    Best-Selling Performance Exhaust Products for 1972 Buick Sportwagons

    Enhance the driving experience in your Buick with 1 quality Performance Exhaust Product components, starting at $25.99.

    Mr. Gasket – Alternator Bracket (Part No.9850)

    Alternator Bracket

    from

    $25.99
    Hold your alternator securely in place with Mr. Gasket chrome alternator bracket. Chrome plated heavy gauge steel for long lasting good looks. Must be used with #9852.

    Product Features:
    • Chrome Plated Steel
    • F-Style
    • Heavy Gauge Steel Construction
    • Fits Small Block Chevy 265-400 CID
    • Must Be Used With Part 9852
    See More

    Most Popular 1972 Buick Sportwagon Performance Ignition Products

    Customize your Buick with 9 Performance Ignition Products products like Performance Coils, Performance Spark Plug Wires, and Performance Ignition Kits, all priced under $186.99.

    Mallory – Unilite Ignition Module (Part No.605)

    Unilite Ignition Module

    from

    $85.29
    Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.

    Product Features:
    • Service Part
    • No Moving Parts To Wear Out
    • Self Contained Unit
    • Can Drive OEM
    • Can Drive High Performance Ignition Coils
    See More

    Mallory – Mallory Kit: Unil Conv: Delco: V8 (Part No.501)

    Mallory Kit: Unil Conv: Delco: V8

    from

    $134.99
    Put an end to high maintenance point ignition systems by installing a proven Mallory Unilite ignition conversion kit. Features at a glance, improves performance and fuel efficiency, easy to install with simple hand tools, reduced maintenance and is available for all popular 12-volt negative ground domestic cars and trucks.

    Product Features:
    • Easy Installation
    • Improved Fuel Economy
    • Reduced Maintenance
    • Accurate Timing
    • Improved Performance
    • Provides A Simple Conversion
    • No Moving Parts To Wear Out
    See More

    MSD Ignition – Blaster 2 Coil: High Performance Ignition Upgrade (Part No.8202)

    Blaster 2 Coil: High Performance Ignition Upgrade

    from

    $49.99
    If you are looking to upgrade your stock coil, or want to compliment the performance of your MSD blaster ignition, MSD 5, 6 or 7, the blaster coil line is the right choice. All of the blaster coils are designed for improved spark output. Special 100:1 windings are used to provide maximum build-up of voltage. These windings are held secure and kept cool in an oil filled metal canister. The tower assembly is molded of durable alkyd material due to its high dielectric characteristics while wide spaced brass primary terminals prevent the possibility of spark. There are several versions of the blaster coil available. All of them have the same internal specifications, but have different housings or components. Each blaster coil can be used with a stock ignition, blaster ignition, MSD 5, 6 or 7 ignition control. Most late model vehicles with electronic ignitions do not require a ballast resistor, check your ignition and manufacturers specifications to determine if a ballast is required in your application.

    Product Features:
    • Improved output coil for electronic ignitions
    • Works w/Blaster Ignition Or MSD 5/6/7 Series
    • Ballast Resistor Required If Used w/Stock Points Ignition
    • Alkyd tower w/high dielectric properties lessens carbon tracking
    See More

    Accel – Supercoil (Part No.140001)

    Supercoil

    from

    $105.99
    Engineered for faster rise time, longer spark duration and increased performance. Unique design with premium grade wire, special low resistance, high turns ratio windings. Produces higher spark energy with breakerless electronic ignition systems. For points application the supplied 0.85 ohm ballast resistor must be used in conjunction with the vehicle original ballast resistor, if so equipped. Oversized molded case with integral cooling fins and high capacity oil filled construction provide high thermal conductivity ensuring cool operation and long life. Extra tall tan Alkyd tower and integral voltage dam eliminate “flashover” to primary terminals. Comes complete with mounting hardware and 0.85 ohm ballast resistor. Effective up to 6,500 RPM.

    Product Features:
    • Oil Filled For Better Cooling
    • Optimized Low Resistance
    • Silicon Magnetic Steel E-Core
    • Higher Energy/Voltage Outputs
    • Quicker Starts
    • Improved Idle Quality
    • Resists Shock And Vibration
    • Resists Corrosion
    See More

    Mallory – Distributor Wiring Harness (Part No.29349)

    Distributor Wiring Harness

    from

    $30.49


    Product Features:
    • Service Part
    • Makes Connections Quick And Easy
    See More

    Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)

    Promaster Classic Series; Ignition Coil

    from

    $186.99
    Universal street and strip. For street-driven vehicles with breaker point ignition or OE electronic ignition. Delivers optimum performance when used with these Mallory ignition products: UNILITE (R) distributor with a HYFIRE (R) capacitive discharge ignition, magnetic breaker less distributor with a HYFIRE (R) capacitive discharge ignition, or dual point distributor. Effective to approximately 6500 RPM when used with a point type distributor (depending on engine combination). Effective to approximately 8000 RPM when used with a Mallory HYFIRE electronic ignition control (depending on engine combination).

    Product Features:
    • Glass Filled Polyester Case
    • Longer Spark Duration
    • Increased Performance
    • No Energy Loss Due To Arcing
    • Includes Brass Contact Terminal
    See More

    Mallory – Unilite Breakerless Ignition Conversion Kit (Part No.503M)

    Unilite Breakerless Ignition Conversion Kit

    from

    $176.99
    Put an end to high maintenance point ignition systems by installing a proven Mallory Unilite ignition conversion kit. Features at a glance, improves performance and fuel efficiency, easy to install with simple hand tools, reduced maintenance and is available for all popular 12-volt negative ground domestic cars and trucks.

    Product Features:
    • Easy Installation
    • Improved Fuel Economy
    • Reduced Maintenance
    • Accurate Timing
    • Improved Performance
    • Provides A Simple Conversion
    • No Moving Parts To Wear Out
    See More

    Accel – Custom Fit Spark Plug Wire Set (Part No.8843)

    Custom Fit Spark Plug Wire Set

    from

    $112.99
    These ACCEL wire sets are custom tailored for true street and strip performance use. Features oversize 8.8 mm ultra performance wires and spark plug boots, 550 degrees Fahrenheit double silicone construction with fiberglass braid. Spiral wound steel core conductor.

    Product Features:
    • 8.8mm Graphite Suppression
    • Silicone Spark Plug Boots
    • 550 Degree Double Silicone Construction
    • Fiberglass Braid
    • Carbon/Graphite Core
    • Magnetic Suppression
    • Fiberglass/Kevlar Core
    • 500 Ohms Resistance
    See More

    Mallory – Distributor Condenser (Part No.401)

    Distributor Condenser

    from

    $17.09
    Distributor Condenser

    Top Picks for 1972 Buick Sportwagon Performance Distributors

    Upgrade Buick Sportwagons with top-quality Performance Distributors parts, including 2 OEM and aftermarket selections for your 1972 model.

    Accel – Distributor Cap And Rotor Kit (Part No.8124)

    Distributor Cap And Rotor Kit

    from

    $48.49


    Product Features:
    • Heavy Duty Cap and Rotor Kit
    • With Brass Inserts
    See More

    MSD Ignition – Distributor; Buick V8 215-350 Pro-Billet (Part No.8548)

    Distributor; Buick V8 215-350 Pro-Billet

    from

    $593.99
    MSD Pro-Billet Distributors are the finest performance and racing distributors available. Every feature has been engineered to endure the rigors of high performance and racing engines. Whether cruising the streets or racing stock cars, dragsters, boats or trucks, MSD has a distributor for it. MSD uses state-of-the-art, Computer Numerical Controlled (CNC) mills and lathes to machine each housing. After a long series of precise cuts and movements, the billet is formed into a flawless distributor housing that is accurate to within 0.001″. The flex-free housings are lightweight, have no porosity or weak areas and look great on polished, show quality engines.

    Product Features:
    • CNC machined billet aluminum housing and billet aluminum base
    • Must Be Used w/An MSD Ignition Control
    • Supplied w/HEI style distributor cap/rotor (accepts Cap-A-Dapts)
    • Mech. advance assem. can be locked out for crank trigger systems
    • Advance plate and weights are fine blanked from chrome moly steel
    • QPQ coated for friction reduction
    • QPQ coated polished steel shaft; guided by sealed ball bearings
    • Easy-to-adjust mech. advance w/supplied springs and stop bushings
    See More

    In-Demand Performance Engines for 1972 Buick Sportwagons

    Select from 11 premium Performance Engines parts for your 1972 Buick Sportwagon, with prices ranging from $26.99 to $825.99.

    B & M – Tork Master 3000 (Part No.20402)

    Tork Master 3000

    from

    $499.99
    Torque Converter – Tork Master 3000 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) APPLICATION: Tork Master 3000 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) The Tork Master is B&M’s lowest cost performance torque converter. The Tork Master is an excellent all-around performance street converter. The best ‘value priced’ street converters available, Tork Master converters come with a new precision pump drive tube and all are pressure tested and fully balanced. The Tork Master torque converter is not recommended for big block or supercharged applications. New allow steel pump drive tube. Needle thrust bearing when factory equipped. New thrust washer between turbine and cover when required.

    Product Features:
    • New Precision Pump Drive Tube
    • Pressure Tested
    • Fully Balanced
    • Needle Thrust Bearing
    • New Thrust Washer
    • Washer Between Turbine and Cover
    See More

    B & M – Tork Master 2400 (Part No.20404)

    Tork Master 2400

    from

    $339.99
    Torque Converter – Tork Master 2400 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) APPLICATION: Tork Master 2400 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) The Tork Master is B&M’s lowest cost performance torque converter. The Tork Master is an excellent all-around performance street converter. The best value priced street converters available, Tork Master converters come with a new precision pump drive tube and all are pressure tested and fully balanced. The Tork Master torque converter is not recommended for big block or supercharged applications. New alloy steel pump drive tube. Needle thrust bearing when factory equipped. New thrust washer between turbine and cover when required. Due to torque converter core availability, the actual converter size may vary but performance functionality will be as advertised.

    Product Features:
    • New Precision Pump Drive Tube
    • Pressure Tested
    • Fully Balanced
    • Needle Thrust Bearing
    • New Thrust Washer
    See More

    Mr. Gasket – High Performance 180 Degree Thermostat for Increased Flow (Part No.4364)

    High Performance 180 Degree Thermostat for Increased Flow

    from

    $26.99
    Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.

    Product Features:
    • Opens At 180 Degrees
    • Designed to Resist Large Variations of Coolant Pressure at High RPM
    • Fully Opens at Correct Temperature Consistently Regardless of Engine RPM
    • For High Performance Street, Drag Race, and Oval Track
    • Copper & Brass Construction – Resists Corrosion
    • High Flow
    See More

    Edelbrock – Sure Seat Valve Springs for Ford 429/460 V8 1969-1987 (Part No.5767)

    Sure Seat Valve Springs for Ford 429/460 V8 1969-1987

    from

    $111.99
    Complete kit includes retainers and locks. Springs made of highest quality spring wire. Springs precision wound to close tolerances. Includes superior quality steel retainers. Includes 7 degree heat-treated valve stem locks. Retainers and locks black oxide coated. Non-Rotator style: Dyno tested and street proven. Great match to Edelbrock camshaft kit.

    Product Features:
    • For Use With Cast Iron Heads
    • Springs Made of Highest Quality Spring Wire
    • Springs Precision Wound To Close Tolerances
    • Use with Original Equipment Heads Only
    See More

    Mr. Gasket – Water Neck (Part No.2557)

    Water Neck

    from

    $27.49
    Precision die cast, these water necks are first polished to a high luster, then chrome plated. Features an O-ring style seal to prevent water leaks. Comes with O-ring gasket and mounting bolts.

    Product Features:
    • Complete with o-rings and mounting bolts
    • Features an o-ring style seal to prevent water leaks
    • Chrome plated
    • 1/2″ NPT port can be used for various coolant temp related sensors or switches
    See More

    B & M – Performance Torque Converter for GM TH400, 350, & 375 Transmissions (Part No.20400)

    Performance Torque Converter for GM TH400, 350, & 375 Transmissions

    from

    $299.99
    Torque Converter – Tork Master 2000 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) APPLICATION: Tork Master 2000 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) The Tork Master is B&M’s lowest cost

    Product Features:
    • New Precision Pump Drive Tube
    • Pressure Tested
    • Fully Balanced
    • Needle Thrust Bearing
    • New Thrust Washer
    See More

    Mr. Gasket – Ultra Seal: Head Gasket (Part No.5799G)

    Ultra Seal: Head Gasket

    from

    $68.99
    Mr. Gasket Ultra-Seal Head Gaskets are a five layer (graphite core/perforated steel outer layers) composite construction. The graphite core has excellent thermoconductivity (transfers heat) away from hot spots in head preventing gasket burn-out. They provide excellent stability, compressibility and high temperature endurance. A high temperature silicone coating ensures sealing of engine fluids. Compatible with cast iron or aluminum heads, they will not brinell (indent) aluminum cylinder heads. Suitable for high performance street, drag race and oval track use. Sold individually.brbrGasket Bore 4.130 inch, Compressed thickness 0.055 inch

    Product Features:
    • Five layer (graphite core/perforated steel outer layers) composite construction
    • Graphite core is excellent transfering heat away from hot spots in head preventing gasket burn-out.
    • Provides excellent stability, compressibility and high temperature endurance
    • Coated with high temperature silicone to ensure sealing of engine fluids
    • Will not brinell (indent) aluminum cylinder heads
    • For high performance street, drag race and oval track use
    • Compatible w/High Octane Fuel
    • Compatible With Exotic Fuel
    See More

    Mr. Gasket – Ultra Seal: Competition Screw-In Rocker Arm Studs (Part No.1075)

    Ultra Seal: Competition Screw-In Rocker Arm Studs

    from

    $94.99
    Mr. Gasket competition screw-in rocker arm studs are manufactured from heat treated black oxide coated Grade 8 steel. Ideal for high performance street and race applications.

    Product Features:
    • Black Oxide Coated Grade 8 Steel
    • Kit Contains 16 Studs
    • Easy To Install
    • Heat Treated Steel
    • Prevents Stud Flexing
    • Black Plated Finish
    See More

    B & M – Holeshot 3600 (Part No.20425)

    Holeshot 3600

    from

    $825.99
    HoleShot 3600 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) APPLICATION: HoleShot 3600 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) A higher than stock stall speed as delivered by the Holeshot converter will provide several advantages and benefits in vehicles with modified engines. Many modifications, particularly big cams, tend to reduce low end power and torque. The high stall converter allows the engine to launch the car at higher rpm where more torque is available. The Holeshot is generally a very good choice for the typical street machine that is looking for better launch capability and more strength. Street rods with modified engines will also benefit from a Holeshot converter. If your vehicle is equipped with a plate type nitrous system, you will need a Nitrous Holeshot!! Stall speed listings are based on engines producing 230lb. ft. of torque at 2,500 rpm. More torque at 2,500 rpm will give you more stall speed, less torque at 2,500 rpm will give you less stall speed than the stall speed ratings indicated. Furnace brazed impeller. New precision steel alloy pump drive tube. New heavy duty needle bearing between stator and impeller (not a thrust washer). Needle bearing between stator and turbine. Furnace brazed turbine. Dual pattern drive lugs on some GM Holeshots. New turbine hub. New springs and rollers in stator.

    Product Features:
    • Furnace Brazed Impeller
    • Steel Alloy Pump Drive Tube
    • Heavy Duty Needle Bearing
    • Between Stator and Turbine
    • Furnace Brazed Turbine
    • Dual Pattern Drive Lugs
    • New Turbine Hub
    • New Springs/Rollers In Stator
    See More

    B & M – Torque Converter, Nitrous Holeshot 3600 (Part No.20482)

    Torque Converter, Nitrous Holeshot 3600

    from

    $665.99
    Nitrous Holeshot Converters are Built with the same features as the other B&M Holeshots, with the addition of anti-balloon plates. The anti-balloon plates will allow these converters to stand up to the instant horsepower nitrous delivers.

    Product Features:
    • 3400-3800 RPM
    • Small And Big Blocks
    • Serious Performance
    • Furnace Brazed
    • Fully Balanced
    See More

    B & M – Holeshot 2400 (Part No.20412)

    Holeshot 2400

    from

    $499.99
    HoleShot 2400 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) Application: HoleShot 2400 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) A higher than stock stall speed as delivered by the Holeshot c

    Product Features:
    • Furnace Brazed Impeller
    • Steel Alloy Pump Drive Tube
    • Heavy Duty Needle Bearing
    • Between Stator and Turbine
    • Furnace Brazed Turbine
    See More

    Most Sold 1972 Buick Sportwagon Performance Fuel Systems

    Explore our best-selling Buick parts for the 1972 Sportwagon among 8 OEM and aftermarket options starting from $12.99.

    Mr. Gasket – Fuel Pump Block-Off Plate (Part No.1515)

    Fuel Pump Block-Off Plate

    from

    $12.99
    This is what you need when changing your manual fuel pump to electric. It blocks the hole that remains when you remove the mechanical fuel pump from the engine to keep the oil inside. This plate is precision machined and is chrome plated.

    Product Features:
    • Chrome Plated Steel
    • Comes With Gasket
    See More

    Edelbrock – Performer 1411 Carburetor: 750 CFM, 4 Barrel, Square Bore, Electric Choke Inlet (Part No.1411)

    Performer 1411 Carburetor: 750 CFM, 4 Barrel, Square Bore, Electric Choke Inlet

    from

    $494.99
    The Edelbrock 1411 Performer Series 750 CFM electric choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characterist

    Product Features:
    • Edelbrock products offer improved performance and aesthetics for a broad array of vehicles and engines. ‘Proven performance’ is the philosophy by which Edelbrock was founded and it continues to this day with the highest standards for performance and quali
    • Electric Choke
    • 4 Barrel Count
    • Square Bore
    • Smooth Secondary Transition
    • Both Timed and Full Vacuum Ports
    • Includes PCV Outlet
    See More

    Edelbrock – Performer 1406 Carburetor: 600 CFM, 4 Barrel, Square Bore, Electric Choke Inlet (Part No.1406)

    Performer 1406 Carburetor: 600 CFM, 4 Barrel, Square Bore, Electric Choke Inlet

    from

    $428.99
    The Edelbrock 1406 Performer Series 600 CFM electric choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characteristics make the 1406 Performer Series 600 CFM electric choke carburetor an outstanding street performer. The first one is that metering rods are utilized to transition between circuits. The carburetor is unaffected by engine backfires, which means that there are no power valves to blow out, and the rods can be changed in seconds without carburetor removal or fuel draining. Secondly, the carburetor has the unique ability to “hold a tune”, so once it is tuned, the carburetor stay’s tuned. What this means to you is that compared to other carburetors, the performance remains consistent and the calibration stays unchanged. The lightweight all-aluminum body features a two-piece body that resists warping and is compatible with gasohol and blended fuels. The simple tub-type bowls and rear-pivot floats all contribute to a carburetor that’s reliable, user-friendly and is easily tunable for miles and miles of trouble-free operation.

    Product Features:
    • Edelbrock products offer improved performance and aesthetics for a broad array of vehicles and engines. ‘Proven performance’ is the philosophy by which Edelbrock was founded and it continues to this day with the highest standards for performance and quali
    • Electric Choke
    • 4 Barrel Count
    • Square Bore
    • Smooth Secondary Transition
    • Both Timed and Full Vacuum Ports
    • Includes PCV Outlet
    See More

    Edelbrock – Performer 1405 Carburetor: 600 CFM, 4 Barrel, Square Bore, Manual Choke Inlet (Part No.1405)

    Performer 1405 Carburetor: 600 CFM, 4 Barrel, Square Bore, Manual Choke Inlet

    from

    $394.99
    The Edelbrock 1405 Performer Series 600 CFM manual choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characteristics make the 1405 Performer Series 600 CFM manual choke carburetor an outstanding street performer. The first one is that metering rods are utilized to transition between circuits. The carburetor is unaffected by engine backfires, which means that there are no power valves to blow out, and the rods can be changed in seconds without carburetor removal or fuel draining. Secondly, the carburetor has the unique ability to “hold a tune”, so once it is tuned, the carburetor stay’s tuned. What this means to you is that compared to other carburetors, the performance remains consistent and the calibration stays unchanged. The lightweight all-aluminum body features a two-piece body that resists warping and is compatible with gasohol and blended fuels. The simple tub-type bowls and rear-pivot floats all contribute to a carburetor that’s reliable, user-friendly and is easily tunable for miles and miles of trouble-free operation.

    Product Features:
    • Edelbrock products offer improved performance and aesthetics for a broad array of vehicles and engines. ‘Proven performance’ is the philosophy by which Edelbrock was founded and it continues to this day with the highest standards for performance and quali
    • Manual Choke
    • 4 Barrel Count
    • Square Bore
    • Smooth Secondary Transition
    • Both Timed and Full Vacuum Ports
    • Includes PCV Outlet
    See More

    Edelbrock – Performer 1407 Carburetor: 750 CFM, 4 Barrel, Square Bore, Manual Choke Inlet (Part No.1407)

    Performer 1407 Carburetor: 750 CFM, 4 Barrel, Square Bore, Manual Choke Inlet

    from

    $451.99
    The Edelbrock 1407 Performer Series 750 CFM manual choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characteristic

    Product Features:
    • Edelbrock products offer improved performance and aesthetics for a broad array of vehicles and engines. ‘Proven performance’ is the philosophy by which Edelbrock was founded and it continues to this day with the highest standards for performance and quali
    • Manual Choke
    • 4 Barrel Count
    • Square Bore
    • Smooth Secondary Transition
    • Both Timed and Full Vacuum Ports
    • Includes PCV Outlet
    See More

    Spectre – Sbc Blk Off Plate W/Bolts (Part No.42463)

    Sbc Blk Off Plate W/Bolts

    from

    $12.99
    Spectre’s triple chrome plated Fuel Pump Block Off Plate was designed for small block Chevrolet engines. Engineered for optimum fit and function, this kit includes a block off plate gasket and chrome mounting bolts with washers.

    Product Features:
    • Necessary if switching to electric fuel pump
    • Includes block off plate gasket
    • Includes chrome mounting bolts with washers
    • Triple chrome plated
    See More

    Edelbrock – Performer 1400 Carburetor: 600 CFM, 4 Barrel, Square Bore, Electric Choke Inlet (Part No.1400)

    Performer 1400 Carburetor: 600 CFM, 4 Barrel, Square Bore, Electric Choke Inlet

    from

    $498.99
    The Edelbrock 1400 Performer Series 600 CFM electric choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characterist

    Product Features:
    • Edelbrock products offer improved performance and aesthetics for a broad array of vehicles and engines. ‘Proven performance’ is the philosophy by which Edelbrock was founded and it continues to this day with the highest standards for performance and quali
    • Electric Choke
    • 4 Barrel Count
    • Square Bore
    • Electric Choke Installed from Factory
    • Smooth Secondary Transition
    • Includes Only Timed Vacuum Port
    • Includes EGR ; Fuel Vapor Outlet
    See More

    Edelbrock – Performer 1412 Carburetor: 800 CFM, 4 Barrel, Square Bore, Manual Choke Inlet (Part No.1412)

    Performer 1412 Carburetor: 800 CFM, 4 Barrel, Square Bore, Manual Choke Inlet

    from

    $538.99
    The Edelbrock 1412 Performer Series 800 CFM manual choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characteristics make the 1412 Performer Series 800 CFM manual choke carburetor an outstanding street performer. The first one is that metering rods are utilized to transition between circuits. The carburetor is unaffected by engine backfires, which means that there are no power valves to blow out, and the rods can be changed in seconds without carburetor removal or fuel draining. Secondly, the carburetor has the unique ability to “hold a tune”, so once it is tuned, the carburetor stay’s tuned. What this means to you is that compared to other carburetors, the performance remains consistent and the calibration stays unchanged. The lightweight all-aluminum body features a two-piece body that resists warping and is compatible with gasohol and blended fuels. The simple tub-type bowls and rear-pivot floats all contribute to a carburetor that’s reliable, user-friendly and is easily tunable for miles and miles of trouble-free operation. Dyno tests proved that the EPS 800 carb outperformed a Holley #3310 carb out-of-the-box by 26 ft-lbs. of torque and 22 hp on a small-block Chevy engine equipped with an Edelbrock Performer RPM power package

    Product Features:
    • Edelbrock products offer improved performance and aesthetics for a broad array of vehicles and engines. ‘Proven performance’ is the philosophy by which Edelbrock was founded and it continues to this day with the highest standards for performance and quali
    • Manual Choke
    • 4 Barrel Count
    • Square Bore
    • Smooth Secondary Transition
    • Both Timed and Full Vacuum Ports
    • Includes PCV Outlet
    • Can Easily Calibrate with Rods and Jets
    See More

    Top-Rated Performance and Racing Products Brands For Your 1972 Buick Sportwagon

    Shop for the best-rated brands offering Performance and Racing Products and other products for your 1972 Buick Sportwagons. Below you’ll find some of our best rated Performance and Racing Products from Mr. Gasket, Edelbrock, and Accel, and more. Performance and Racing Products from these brands that fit a 1972 Sportwagon start at just $12.99 and are rated as high as 4 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.

    Popular Mr. Gasket 1972 Buick Sportwagon Performance and Racing Products

    When it comes to maintaining or upgrading your 1972 Buick Sportwagon, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. Mr. Gasket ticks all of those boxes. We offer a wide selection of Mr. Gasket Performance and Racing Products, specifically designed for the 1972 Buick Sportwagon. With over 7 Mr. Gasket brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $12.99, with an average price of just $43.65. Plus, with over 28 customer reviews and an average rating of 4 stars, you can trust that our Mr. Gasket Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

    Thermocap Radiator Cap
    from
    $48.09
    This product is not rated

    Thermocap Radiator Cap

    “”

    Ultra Seal: Head Gasket
    from
    $68.99
    This product is not rated

    Ultra Seal: Head Gasket

    “”

    Water Neck
    from
    $27.49
    This product is not rated

    Water Neck

    “”

    Popular Edelbrock 1972 Buick Sportwagon Performance and Racing Products

    Edelbrock auto parts is one of the highest quality Performance and Racing Product brands in the market. Any 1972 Buick Sportwagon owner should feel confident when installing genuine Edelbrock parts in their vehicle. To ensure the best fit and performance for your 1972 Sportwagon, Advance Auto Parts carries a full inventory of 19 Edelbrock Performance and Racing Products. Plus you will be keeping your Buick in peak condition while saving money because prices on these Edelbrock Performance and Racing Products range from $111.99 to $1,138.99, plus, with more than 76 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Performance and Racing Products below will deliver on both quality and value.

    Performer RPM 2 Carb/Plate Nitrous Systems for Dominator
    from
    $1138.99
    This product is not rated

    Performer RPM 2 Carb/Plate Nitrous Systems for Dominator

    “”

    FAQs for 1972 Buick Sportwagon Performance and Racing Products

    Which Performance and Racing Products are best-sellers for 1972 Buick Sportwagons?

    Out of 78 Performance and Racing Products that fit 1972 Buick Sportwagons, the following parts are the top sellers:

    What’s the price range for 1972 Buick Sportwagon Performance and Racing Products?

    Performance and Racing Product prices for the 1972 Buick Sportwagon start at $7.69 and go up to $1,138.99 for the most premium parts.

    What’s the average price of a Performance and Racing Product for a 1972 Buick Sportwagon?

    The average price for Performance and Racing Products for the 1972 Buick Sportwagon is $392.68. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.

    Does Advance Auto Parts sell Performance and Racing Products for other Buick Sportwagon model years?

    Yes, we currently carry Performance and Racing Products for 8 model years of Buick Sportwagons between 1964 and 1971. Performance and Racing Products are bought most frequently for the following model years: 1971, 1970, 1969, 1968, 1967, 1966, 1965, and 1964.

    What are the cheapest Performance and Racing Products for my 1972 Buick Sportwagon?

    The cheapest 1972 Buick Sportwagon Performance and Racing Products we carry in stock are:

    What types of Performance and Racing Products do you sell for my 1972 Buick Sportwagon?

    As of 2/5/25, these are some of the most in-demand types of Performance and Racing Products for a 1972 Buick Sportwagon:

    Can I get help with 1972 Buick Sportwagon Performance and Racing Product orders?

    Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Buick Performance and Racing Products and more.

    What is your return policy for Buick Sportwagon Performance and Racing Products?

    Advance Auto Parts keeps returns simple. For new Buick Sportwagon Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.