1972 Buick Skylark Exhaust Parts
Find Your Specific 1972 Buick Skylark Exhaust Parts
Below you will find various in-demand Buick Exhaust Parts, components and accessories for your 1972 Skylark. Advance Auto Parts has popular Skylark parts like Exhaust Manifold and Headers, Exhaust Mufflers, Exhaust Fittings and more. You’ll also find aftermarket and OEM Exhaust Parts for other Skylark model years including
1990,
1991,
1992,
1993,
1994,
1995,
1996,
1997,
1998 and more. Select a category of 1972 Buick Skylark Exhaust Parts below and start saving instantly.
Popular 1972 Buick Skylark Exhaust Parts Categories
Essential Exhaust Parts for 1972 Buick Skylarks
Flowmaster Inc. – Prebent Tailpipes – 2.50 in. Rear Exit – Pair (Part No.15802)
from
$237.99
Prebent pipe kits. Flowmaster’s 16 gauge mandrel bent pipe kits are designed to fit perfectly onto your vehicle with all the quality and performance that you would expect from Flowmaster.
See More
Dorman – Help – Manifold Bolt and Spring Kit – M10-1.5 x 72mm (Part No.03126)
from
$11.49
Exhaust manifold fastener kits provide a time-saving solution for repairing the manifold. Each kit is designed for direct replacement of rusted or damaged exhaust bolts and springs.
Product Features:
See More
Product Features:
- Ideal replacement – the manifold bolt and spring match the fit and function of the original equipment hardware, including bolt diameter, thread pitch and head type
- Complete installation – this kit includes hardware required for securely attaching the manifold to the exhaust system
- Trustworthy construction – the kit’s bolt and spring are made of hardened steel for durable, long-lasting service life
- Quality tested – kit components have undergone extensive testing to ensure proper function and long service life
Taylor Gaskets – Vibe Lock Header Bolt Kit (Part No.310004)
from
$89.99
Vibe Lock Header Bolt Kit
ARP Auto Racing – For Use With Chevy Small Block, 3/8"-16, 1"L, Hex Head, Natural, Ss, Set Of 12 (Part No.400-1111)
from
$51.99
ARP manufactures a variety of premium grade bolt and stud kits to facilitate installation of exhaust headers including the popular stainless stud kit with 12 point nuts. The Stainless 300 material is not affected by corrosion or extreme heat, making it ideal for the application.
Product Features:
See More
Product Features:
- Material Is Not Affected By Corrosion Or Extreme Heat
- The Compact 12-Point Nut Lets You Easily Slip A Socket Close To The Pipe
- Substantially Stronger Than Grade 8 Hardware
- Nominally Rated At 170,000 Psi Tensile Strength
- 3/8″-16 Thread Size
- 1″ Underhead Length
Flowtech – Terminator; Exhaust Tips (Part No.59905FLT)
from
$93.99Product Features:
- Show Quality Chrome Platinum
- Durable Black Finish
- Can Be Welded Or Clamped
- Complete The System
- Glass-Packed Resonators
MagnaFlow – Street Series Crossmember-Back Performance Exhaust System (Part No.15893)
from
$1217.99
The MagnaFlow Street Series Crossmember-Back Performance Exhaust System 15893 brings enhanced engine sound and dyno-proven performance to your muscle car with a healthy helping of our deep, resonant signature exhaust note at Moderate exterior and Mild interior sound levels. Thanks to its durable, corrosion resistant stainless steel design, this exhaust system will handle whatever tarmac you decide to leave your mark on. This performance exhaust kit features a crossmember-back layout designed to replace your exhaust system from the crossmember on back. With its fast-flowing, mandrel bent 2.5in. main piping and 2 Straight-Through mufflers ending in a Multiple Exit Options exit with 2.75in. Polished Weld-On Single Wall Turndown Cut Edge tips, your muscle car will be sounding as awesome as it looks. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15893 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s limited construction warranty.
Product Features:
See More
Product Features:
- Durable corrosion-resistant stainless steel construction
- CNC precision robotic manufacturing techniques
- Dyno-proven performance
MagnaFlow – Street Series Crossmember-Back Performance Exhaust System (Part No.15894)
from
$1065.99
The MagnaFlow Street Series Crossmember-Back Performance Exhaust System 15894 brings enhanced engine sound and dyno-proven performance to your muscle car with a healthy helping of our deep, resonant signature exhaust note at Moderate exterior and Mild interior sound levels. Thanks to its durable, corrosion resistant stainless steel design, this exhaust system will handle whatever tarmac you decide to leave your mark on. This performance exhaust kit features a crossmember-back layout designed to replace your exhaust system from the crossmember on back. With its fast-flowing, mandrel bent 2.5in. main piping and 2 Straight-Through mufflers ending in a Multiple Exit Options exit with 2.75in. Polished Weld-On Single Wall Turndown Cut Edge tips, your muscle car will be sounding as awesome as it looks. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15894 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s limited construction warranty.
Product Features:
See More
Product Features:
- Durable corrosion-resistant stainless steel construction
- CNC precision robotic manufacturing techniques
- Dyno-proven performance
MagnaFlow – Street Series Crossmember-Back Performance Exhaust System (Part No.15897)
from
$1154.99
The MagnaFlow Street Series Crossmember-Back Performance Exhaust System 15897 brings enhanced engine sound and dyno-proven performance to your muscle car with a healthy helping of our deep, resonant signature exhaust note at Aggressive exterior and Moderate interior sound levels. Thanks to its durable, corrosion resistant stainless steel design, this exhaust system will handle whatever tarmac you decide to leave your mark on. This performance exhaust kit features a crossmember-back layout designed to replace your exhaust system from the crossmember on back. With its fast-flowing, mandrel bent 3in. main piping and 2 Straight-Through mufflers ending in a Dual Split Rear Behind Rear Tires exit that you can enhance with tips of your choosing, your muscle car will be sounding as awesome as it looks. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15897 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s limited construction warranty.
Product Features:
See More
Product Features:
- Durable corrosion-resistant stainless steel construction
- CNC precision robotic manufacturing techniques
- Dyno-proven performance
Dorman – Help – Exhaust Flange Spring (Part No.03084)
from
$7.99
Designed for an exact fit, our Exhaust Spring provides you with the proper flange spring for replacing the manifold. Save time and energy by having the right hardware on hand when you need it.
Product Features:
See More
Product Features:
- Direct replacement – this exhaust spring matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this spring is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Help – Exhaust Manifold Stud Kit – 3/8-16 x 3-1/4 In. (Part No.03113)
from
$6.99
Our exhaust manifold flange kit includes all necessary studs and nuts for a complete repair.
Product Features:
See More
Product Features:
- Direct replacement – this exhaust flange stud and nut are designed to match the fit and function of the original hardware on specified vehicles
- Ideal solution – this stud and nut are reliable replacements for original parts that are missing or have failed due to wear
- Durable construction – these parts are made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Walker – Exhaust System Hanger (Part No.35183)
from
$16.79
Complete your exhaust repair with Walker exhaust hangers. Designed with OE-style features to support undercar exhaust components, Walker hangers are manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- KEEPS EXHAUST PARTS IN PLACE – Designed to support undercar exhaust components
- OE DESIGN – Designed with OE-style features for easy installation
- AVAILABLE IN DIFFERENT SIZES – Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS – Made from quality steel for durability and long life
- BETTER TOGETHER – Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
Walker – Exhaust System Hanger (Part No.35262)
from
$34.99
Complete your exhaust repair with Walker exhaust hangers. Designed with OE-style features to support undercar exhaust components, Walker hangers are manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- KEEPS EXHAUST PARTS IN PLACE : Designed to support undercar exhaust components
- OE DESIGN : Designed with OE-style features for easy installation
- AVAILABLE IN DIFFERENT SIZES : Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS : Made from quality steel for durability and long life
- BETTER TOGETHER : Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
Flowmaster Inc. – Super 44 Series Muffler, 2.5in Offset Inlet 2.5in Offset Outlet, Non-Reversible, Aggressive Sound (Part No.942548)
from
$137.99
Flowmaster’s Super 44 muffler uses the same Delta Flow technology found in our larger Super 40 mufflers. The Super 44 delivers a powerful rich tone and is the most aggressive, deepest sounding, highest performing four-inch case street muffler we’ve ever built! Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More
Walker – SoundFX Universal Exhaust Muffler 1.875" Inlet (ID) 1.75" Outlet (ID) (Part No.17817)
from
$239.99
Featuring 100% aluminized steel for longer service life compared to low-carbon steel, Walker SoundFX universal mufflers deliver quality appearance and favorable acoustics while mechanical interior joints and spun-locked heads provide durability.
Product Features:
See More
Product Features:
- RESISTS CORROSION – Aluminized steel construction and internal drainage system helps reduce corrosion
- BUILT TO LAST – Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
- FLEXIBLE SOLUTION – Customizable design features expandable bushings for easy fitment and may require specialized fabrication and welding for installation
- FACTORY SOUND – Louvered tubes help reduce radiated noise for factory-style sound quality compared to straight perforated tubes
- GET MORE MILES FROM YOUR MUFFLER – Designed and tested to extend muffler life
Walker – Sound Solution Muffler (Part No.18753)
from
$62.99
Sound Solution mufflers are engineered with 100% aluminized steel for longer service life compared to low carbon steel. These mufflers have mechanical interior joints for durability, And spun-locked heads for resistance to rupture from backfires. Sound Solution mufflers are available in a universal fitment style, with both quality appearance And favorable acoustics.
See More
Walker – SoundFX Direct Fit Exhaust Muffler 2" Inlet (ID) 2" Outlet (OD) (Part No.18271)
from
$74.99
Featuring 100% aluminized steel for longer service life compared to low-carbon steel, Walker SoundFX direct-fit mufflers deliver quality appearance and favorable acoustics while mechanical interior joints and spun-locked heads provide durability.
Product Features:
See More
Product Features:
- RESISTS CORROSION – Aluminized steel construction and internal drainage system helps reduce corrosion
- BUILT TO LAST – Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
- EASY TO INSTALL – Direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation that doesn’t require specialized fabrication and welding
- FACTORY SOUND – Louvered tubes help reduce radiated noise for factory-style sound quality compared to straight perforated tubes
- GET MORE MILES FROM YOUR MUFFLER – Designed and tested to extend muffler life
Walker – Exhaust Clamp (Part No.35336)
from
$2.99
Complete your exhaust repair with an Exhaust Mate U-bolt clamp. Designed to ensure a tight, leak-resistant connection, Exhaust Mate hardware is manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- CONNECTS EXHAUST PARTS – Provides secure, leak-resistant connection
- AVAILABLE IN DIFFERENT SIZES – Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS – Made from quality material for durability and long life
- BETTER TOGETHER – Use Walker accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade
Walker – Exhaust Bracket (Part No.35724)
from
$19.49
Complete your exhaust repair with Walker brackets. Designed to support undercar exhaust components, Walker brackets are manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- KEEPS EXHAUST PARTS IN PLACE : Designed to support undercar exhaust components
- AVAILABLE IN DIFFERENT SIZES : Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS : Made from quality steel for durability and long life
- COMPATIBILITY : Works seamlessly with OE and Walker aftermarket replacement parts
- BETTER TOGETHER : Use Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
Walker – Exhaust Clamp (Part No.35335)
from
$2.99
Complete your exhaust repair with an Exhaust Mate U-bolt clamp. Designed to ensure a tight, leak-resistant connection, Exhaust Mate hardware is manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- CONNECTS EXHAUST PARTS – Provides secure, leak-resistant connection
- AVAILABLE IN DIFFERENT SIZES – Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS – Made from quality material for durability and long life
- BETTER TOGETHER – Use Walker accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade
Hooker BlackHeart – Hooker BlackHeart LS Swap Exhaust Manifolds – Stainless Steel – Natural Cast (Part No.8503HKR)
from
$674.99
Product Features:
See More
- 2.5-inch outlet diameter offers improved flow for maximum performance from a cast exhaust manifold
- Tight tuck design provides universal fit for most popular chassis and a clean traditional muscle car appearance
- Intended for GM LS engine swap applications where durability, quiet operation, and leak-free sealing is desired
- Plain as-cast finish for a factory appearance. Also available in polished.
- Nickel plated steel mating flanges, MLS mating flange gaskets, and mating flange hardware included
- Stainless Steel construction to provide unmatched durability and corrosion resistance
- Perfect complement to Hooker engine swap mount plates and Holley engine swap oil pans
Hooker Headers – ExhstHdr (Part No.2105-3HKR)
from
$1249.99
ExhstHdr
Hooker Headers – Hooker Mid Length Headers – Ceramic Coated (Part No.2475-1HKR)
from
$1069.00
Product Features:
See More
- Designed for Pro Touring style or aggressively lowered vehicles where ground clearance is of utmost importance
- Mid-length geometry designed for maximum ground clearance and optimized engine compartment fitment
- Provide an elevated level of port finishing and fitment clearances compared to SB Chevy headers typically offered for this application
- 3/8″ laser cut flanges, TIG welded and flat finished for maximum strength and a leak free seal
- 1-5/8 inch primary tube design is perfect for mildly modified engines
- Coated in silver metallic ceramic coating for maximum performance and reduced underhood temps
- Long-taper collectors for smooth exhaust flow transition from the headers to the exhaust system
- Compatible with straight and angle plug heads
- Compatible with all stock manual and power steering boxes
- Compatible with GM 152 and 168 tooth starters
- Compatible with stock floor shift automatic transmissions; column shift automatics require aftermarket shift linkage. Not compatible with column shift manual transmissions or factory floor shift manual transmissions with stock linkage
- Compatible with aftermarket large sump oil pans
- Bolt-in installation capability with new Hooker 2.5″ and 3″ exhaust systems for these applications, with available adapters (O2 bungs provided on adapter tubes)
Hooker BlackHeart – Hooker BlackHeart LS Swap Exhaust Manifolds – Stainless Steel – Polished Finish (Part No.8503-1HKR)
from
$899.99
Product Features:
See More
- 2.5 inch outlet diameter offers improved flow for maximum performance from a cast exhaust manifold
- Tight tuck design provides universal fit for most popular chassis and a clean traditional muscle car appearance
- Intended for GM LS engine swap applications where durability, quiet operation, and leak-free sealing is desired
- Polished finish, but also available in natural cast finish for a factory appearance
- Nickel plated steel mating flanges, MLS mating flange gaskets, and mating flange hardware included
- Stainless Steel construction to provide unmatched durability and corrosion resistance
- Perfect complement to Hooker engine swap mount plates and Holley engine swap oil pans
Hooker BlackHeart – Hooker BlackHeart Adapter Kit (Part No.70701313-RHKR)
from
$309.99
Product Features:
See More
- Mandrel bent 304SS construction provides enhanced performance and appearance characteristics
- Connects Hooker LS cast iron manifolds to Hooker 2.5″ A-body exhaust systems
- O2 bungs included in each adapter tube are indexed for reliable wide-band sensor operation
- Compatible with all GM automatic transmissions
- Compatible with 4th-gen F-body T56 and T56 Magnum transmissions
- Includes OE quality clamps; requires no cutting or welding to install
Flowtech – HEADER FLT BLOCK HUGGER (Part No.10010FLT)
from
$84.99
HEADER FLT BLOCK HUGGER
Flowmaster Inc. – Prebent Tailpipes – 3.00 in. Rear Exit – Pair (Part No.15819)
from
$255.99
Prebent pipe kits. Flowmaster’s 16 gauge mandrel bent pipe kits are designed to fit perfectly onto your vehicle with all the quality and performance that you would expect from Flowmaster.
See More
Upgrade your 1972 Buick Skylark with Top-Quality Exhaust Parts
When it comes to maintaining or upgrading your 1972 Buick Skylark, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Buick or enhancing its overall performance, Exhaust Parts are key to keeping your Skylark functioning at its best. At Advance Auto Parts, we offer a wide selection of 31 Exhaust Parts for the 1972 Buick Skylark, designed to meet your needs without breaking the bank.
From
Exhaust Manifold and Header
replacements to
Exhaust Mufflers
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Exhaust Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Exhaust Parts for your 1972 Buick Skylark at great prices.
Our Exhaust Parts inventory for this model
ranges from just $2.99 to $1,632.00, with
an average price of $465.00.
Our 31 Exhaust Parts in stock come from 9 trusted brands, so you’re sure to find the right part for your 1972 Buick Skylark without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1972 Buick Skylark, we stock popular OEM and aftermarket Exhaust Parts from top names
like Flowmaster Inc., and more.
Flowmaster Inc. Exhaust Parts
start at just $137.99 and boast an impressive 4.4 stars average rating from customers.
With 208 customer reviews and counting, our 1972 Buick Skylark Exhaust Parts have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Exhaust Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 1972 Buick Skylark is always ready to roll. We’re committed to providing you with everything you need to keep your Skylark in top shape, all in one place.
Start shopping confidently below for your 1972 Buick Skylark!
Best-Selling Exhaust Manifold and Headers for 1972 Buick Skylarks
Enhance the driving experience in your Buick with 19 quality Exhaust Manifold and Header components, starting at $49.49.
Mr. Gasket – Exhsthdrbolt (Part No.2230G)
from
$49.49
Headlock&trade: Bolts eliminate the need for lock washers, Period. That’s because each Headlock&trade: Bolt features 24 equally-spaced, stainless steel teeth serrations that bite into and hold onto the attaching surface-eliminating the need for lock-washers.
Product Features:
See More
Product Features:
- 12 per Package
- Includes a ball-head/hex-key socket-installation tool that makes it easy to get them started
- 410 stainless steel
- Minimum 180,000 PSI tensile strength
- 24 equally spaced clockwise teeth
Hooker BlackHeart – Hooker BlackHeart Long Tube Headers – Stainless Steel (Part No.70101318-RHKR)
from
$1632.00
Product Features:
See More
- 304SS construction- provides long-term corrosion resistant protection of components
- Includes 3″ merge-style collectors and velocity spears
- Compatible with factory A/C evaporator case and stock GM LS engine spark plug wires
- Bolt-in compatible with both sets of Hooker 1968-72 A-body specific engine brackets
- Does not require relocation of brake system proportioning valve
- Compatible with all GM automatic and Tremec T56/T56 Magnum transmissions
- O2 bung locations optimized for wide-band O2 sensor operation/reliability
- Easy installation- includes all necessary hardware
- Manufacturer’s Limited Warranty
Hooker Headers – ExhstHdr (Part No.2289-1HKR)
from
$1450.99
ExhstHdr
Hooker Headers – ExhstHdr (Part No.2105-3HKR)
from
$1249.99
ExhstHdr
Hooker Headers – Hooker Mid Length Headers – Ceramic Coated (Part No.2475-1HKR)
from
$1069.00
Product Features:
See More
- Designed for Pro Touring style or aggressively lowered vehicles where ground clearance is of utmost importance
- Mid-length geometry designed for maximum ground clearance and optimized engine compartment fitment
- Provide an elevated level of port finishing and fitment clearances compared to SB Chevy headers typically offered for this application
- 3/8″ laser cut flanges, TIG welded and flat finished for maximum strength and a leak free seal
- 1-5/8 inch primary tube design is perfect for mildly modified engines
- Coated in silver metallic ceramic coating for maximum performance and reduced underhood temps
- Long-taper collectors for smooth exhaust flow transition from the headers to the exhaust system
- Compatible with straight and angle plug heads
- Compatible with all stock manual and power steering boxes
- Compatible with GM 152 and 168 tooth starters
- Compatible with stock floor shift automatic transmissions; column shift automatics require aftermarket shift linkage. Not compatible with column shift manual transmissions or factory floor shift manual transmissions with stock linkage
- Compatible with aftermarket large sump oil pans
- Bolt-in installation capability with new Hooker 2.5″ and 3″ exhaust systems for these applications, with available adapters (O2 bungs provided on adapter tubes)
Hooker Headers – ExhstHdr (Part No.2105HKR)
from
$933.99
ExhstHdr
Hooker BlackHeart – Hooker BlackHeart LS Swap Exhaust Manifolds – Stainless Steel – Polished Finish (Part No.8503-1HKR)
from
$899.99
Product Features:
See More
- 2.5 inch outlet diameter offers improved flow for maximum performance from a cast exhaust manifold
- Tight tuck design provides universal fit for most popular chassis and a clean traditional muscle car appearance
- Intended for GM LS engine swap applications where durability, quiet operation, and leak-free sealing is desired
- Polished finish, but also available in natural cast finish for a factory appearance
- Nickel plated steel mating flanges, MLS mating flange gaskets, and mating flange hardware included
- Stainless Steel construction to provide unmatched durability and corrosion resistance
- Perfect complement to Hooker engine swap mount plates and Holley engine swap oil pans
Hooker BlackHeart – Hooker BlackHeart LS Swap Exhaust Manifolds – Black Ceramic Finish (Part No.8502-3HKR)
from
$742.99
Product Features:
See More
- Intended for GM LS engine swap applications where durability, quiet operation, and leak-free sealing is desired
- Black ceramic coating for reduced engine compartment temps and improved corrosion resistance
- Nickel plated steel mating flanges, MLS mating flange gaskets, and mating flange hardware included
- Cast from Hi-Silicon-Moly Ductile Iron to provide durability and corrosion resistance
- 2.5 inch outlet diameter offers improved flow for maximum performance from a cast iron exhaust manifold
- Tight tuck design provides universal fit for most popular chassis and a clean traditional muscle car appearance
- Perfect complement to Hooker engine swap mount plates and Holley engine swap oil pans
Hooker BlackHeart – Hooker BlackHeart LS Swap Exhaust Manifolds – Stainless Steel – Natural Cast (Part No.8503HKR)
from
$674.99
Product Features:
See More
- 2.5-inch outlet diameter offers improved flow for maximum performance from a cast exhaust manifold
- Tight tuck design provides universal fit for most popular chassis and a clean traditional muscle car appearance
- Intended for GM LS engine swap applications where durability, quiet operation, and leak-free sealing is desired
- Plain as-cast finish for a factory appearance. Also available in polished.
- Nickel plated steel mating flanges, MLS mating flange gaskets, and mating flange hardware included
- Stainless Steel construction to provide unmatched durability and corrosion resistance
- Perfect complement to Hooker engine swap mount plates and Holley engine swap oil pans
Hooker Headers – Hooker Small Block Chevrolet Exhaust Manifolds (Part No.8525-1HKR)
from
$562.99
Product Features:
See More
- A smoother, cleaner appearance compared to original exhaust manifolds, while maintaining a factory style look and feel
- Made from high silicon-molybdenum ductile iron for high temperature strength plus resistance to oxidation and cracking
- Designed with a larger 1 5/8″ cross-sectional area and 2 ╜” outlets for better air flow and increased performance
- Designed for rectangular port heads
- Accommodates standard straight and Vortec straight plug head designs for better application coverage
- Includes weld-on flanges for easier downpipe pipe installation (custom downpipe required)
- Available in natural cast iron or ceramic coated finishes (silver, black and titanium)
- Includes mounting hardware and gaskets for inlet and outlet flanges
Flowtech – Flowtech LS Swap Exhaust Manifolds – Silver Ceramic Finish (Part No.31730-1FLT)
from
$497.99
Product Features:
See More
- Intended for GM LS engine swap applications where durability and leak-free sealing is desired at a budget-oriented price
- Nickel plated steel mating flanges included (mating flange fasteners are not included)
- 2.25 inch outlet diameter offers improved flow for maximum performance from a cast iron exhaust manifold
- 2 bolt exit flange configuration matches the E-rod exhaust manifolds for a factory like fitment. This allows the use of factory gaskets and fasteners if desired, for an OE quality seal and fitment to emissions devices
- Cast from Hi-Silicon-Moly Ductile Iron to provide durability and corrosion resistance
- Tight tuck design provides universal fit for most popular chassis and a clean traditional muscle car appearance
- Available in plain as-cast finish or with black or silver ceramic coatings for reduced engine compartment temps and improved corrosion resistance
Hooker Headers – Hooker Small Block Chevrolet Exhaust Manifolds (Part No.8525-3HKR)
from
$449.99
Product Features:
See More
- A smoother, cleaner appearance compared to original exhaust manifolds, while maintaining a factory style look and feel
- Made from high silicon-molybdenum ductile iron for high temperature strength plus resistance to oxidation and cracking
- Designed with a larger 1 5/8″ cross-sectional area and 2 ╜” outlets for better air flow and increased performance
- Designed for rectangular port heads
- Accommodates standard straight and Vortec straight plug head designs for better application coverage
- Includes weld-on flanges for easier downpipe pipe installation (custom downpipe required)
- Available in natural cast iron or ceramic coated finishes (silver, black and titanium)
- Includes mounting hardware and gaskets for inlet and outlet flanges
Hooker Headers – Hooker Small Block Chevrolet Exhaust Manifolds (Part No.8527-3HKR)
from
$449.99
Product Features:
See More
- A smoother, cleaner appearance compared to original exhaust manifolds, while maintaining a factory style look and feel
- Made from high silicon-molybdenum ductile iron for high temperature strength plus resistance to oxidation and cracking
- Designed with a larger 1 5/8″ cross-sectional area and 2 ╜” outlets for better air flow and increased performance
- Designed for raised D-port heads
- Accommodates standard straight and Vortec straight plug head designs for better application coverage
- Includes weld-on flanges for easier downpipe pipe installation (custom downpipe required)
- Available in natural cast iron or ceramic coated finishes (silver, black and titanium)
- Includes mounting hardware and gaskets for inlet and outlet flanges
Flowtech – Flowtech LS Swap Exhaust Manifolds – Black Ceramic Finish (Part No.31730-3FLT)
from
$404.99
Product Features:
See More
- Intended for GM LS engine swap applications where durability and leak-free sealing is desired at a budget-oriented price
- Nickel plated steel mating flanges included (mating flange fasteners are not included)
- 2.25 inch outlet diameter offers improved flow for maximum performance from a cast iron exhaust manifold
- 2 bolt exit flange configuration matches the E-rod exhaust manifolds for a factory like fitment. This allows the use of factory gaskets and fasteners if desired, for an OE quality seal and fitment to emissions devices
- Cast from Hi-Silicon-Moly Ductile Iron to provide durability and corrosion resistance
- Tight tuck design provides universal fit for most popular chassis and a clean traditional muscle car appearance
- Available in plain as-cast finish or with black or silver ceramic coatings for reduced engine compartment temps and improved corrosion resistance
Hooker Headers – Hooker Small Block Chevrolet Exhaust Manifolds (Part No.8525HKR)
from
$371.99
Product Features:
See More
- A smoother, cleaner appearance compared to original exhaust manifolds, while maintaining a factory style look and feel
- Made from high silicon-molybdenum ductile iron for high temperature strength plus resistance to oxidation and cracking
- Designed with a larger 1 5/8″ cross-sectional area and 2 ╜” outlets for better air flow and increased performance
- Designed for rectangular port heads
- Accommodates standard straight and Vortec straight plug head designs for better application coverage
- Includes weld-on flanges for easier downpipe pipe installation (custom downpipe required)
- Available in natural cast iron or ceramic coated finishes (silver, black and titanium)
- Includes mounting hardware and gaskets for inlet and outlet flanges
Hooker Headers – Hooker Small Block Chevrolet Exhaust Manifolds (Part No.8527HKR)
from
$339.99
Product Features:
See More
- A smoother, cleaner appearance compared to original exhaust manifolds, while maintaining a factory style look and feel
- Made from high silicon-molybdenum ductile iron for high temperature strength plus resistance to oxidation and cracking
- Designed with a larger 1 5/8″ cross-sectional area and 2 ╜” outlets for better air flow and increased performance
- Designed for raised D-port heads
- Accommodates standard straight and Vortec straight plug head designs for better application coverage
- Includes weld-on flanges for easier downpipe pipe installation (custom downpipe required)
- Available in natural cast iron or ceramic coated finishes (silver, black and titanium)
- Includes mounting hardware and gaskets for inlet and outlet flanges
Flowtech – Flowtech LS Swap Exhaust Manifolds – Natural Cast Finish (Part No.11730FLT)
from
$292.99
Product Features:
See More
- Intended for GM LS engine swap applications where durability and leak-free sealing is desired at a budget-oriented price
- Nickel plated steel mating flanges included (mating flange fasteners are not included)
- 2.25 inch outlet diameter offers improved flow for maximum performance from a cast iron exhaust manifold
- 2 bolt exit flange configuration matches the E-rod exhaust manifolds for a factory like fitment. This allows the use of factory gaskets and fasteners if desired, for an original quality seal and fitment
- Cast from Hi-Silicon-Moly Ductile Iron to provide durability and corrosion resistance
- Tight tuck design provides universal fit for most popular chassis and a clean traditional muscle car appearance
- Available in plain as-cast finish or with black or silver ceramic coatings for reduced engine compartment temps and improved corrosion resistance
Taylor Gaskets – Vibe Lock Header Bolt Kit (Part No.310004)
from
$89.99
Vibe Lock Header Bolt Kit
Taylor Gaskets – Vibe-Lock Bolt (Part No.310016)
from
$89.99
Vibe-Lock Bolt
Most Popular 1972 Buick Skylark Exhaust Mufflers
Customize your Buick with 5 Exhaust Mufflers products
like Mufflers, all
priced under $137.99.
Flowmaster Inc. – Super 44 Series Muffler, 2.5in Offset Inlet 2.5in Offset Outlet, Non-Reversible, Aggressive Sound (Part No.942548)
from
$137.99
Flowmaster’s Super 44 muffler uses the same Delta Flow technology found in our larger Super 40 mufflers. The Super 44 delivers a powerful rich tone and is the most aggressive, deepest sounding, highest performing four-inch case street muffler we’ve ever built! Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More
Walker – Quiet-Flow SS Direct Fit Exhaust Muffler 2" Inlet (ID) 2" Outlet (ID) (Part No.22105)
from
$82.99
Product Features:
See More
- CORROSION RESISTANT STAINLESS STEEL – The only broad-market muffler with 100% stainless-steel construction that delivers longer life versus aluminized mufflers while an internal drainage system reduces moisture collection
- EASY TO INSTALL – Direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation and doesn’t require specialized fabrication and welding
- BUILT TO LAST – Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
- PREMIUM ACOUSTIC CONTROL – OE-style louvered tubes lower noise levels while OE-style domed heads help reduce radiated noise for premium factory-style sound quality compared to straight perforated tubes
- DESIGN VALIDATED – Acoustic and flow tested for quality OE-style sound you can count on
- BUY WITH CONFIDENCE – Comes with Walker’s limited warranty and exclusive 90-Day Safe and Sound Guarantee. Visit Walkerexhaust.com for details.
Walker – Sound Solution Muffler (Part No.18753)
from
$62.99
Sound Solution mufflers are engineered with 100% aluminized steel for longer service life compared to low carbon steel. These mufflers have mechanical interior joints for durability, And spun-locked heads for resistance to rupture from backfires. Sound Solution mufflers are available in a universal fitment style, with both quality appearance And favorable acoustics.
See More
Walker – SoundFX Direct Fit Exhaust Muffler 2" Inlet (ID) 2" Outlet (ID) (Part No.18182)
from
$61.99
Featuring 100% aluminized steel for longer service life compared to low-carbon steel, Walker SoundFX direct-fit mufflers deliver quality appearance and favorable acoustics while mechanical interior joints and spun-locked heads provide durability.
Product Features:
See More
Product Features:
- RESISTS CORROSION – Aluminized steel construction and internal drainage system helps reduce corrosion
- BUILT TO LAST – Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
- EASY TO INSTALL – Direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation that doesn’t require specialized fabrication and welding
- FACTORY SOUND – Louvered tubes help reduce radiated noise for factory-style sound quality compared to straight perforated tubes
- GET MORE MILES FROM YOUR MUFFLER – Designed and tested to extend muffler life
BRExhaust – Exhaust Muffler (Part No.100-1757)
from
$58.99
This BRExhaust replacement exhaust is engineered based on the original OEM design to ensure reliability, durability and performance. The ease of installation will save you time and effort, getting you back out on the road sooner. Each muffler features thicker hangers for added strength and fully welded, perforated tubes to guarantee a long service life.
See More
Top Picks for 1972 Buick Skylark Exhaust Fittings
Upgrade Buick Skylarks with top-quality Exhaust Fittings parts, including 1 OEM and aftermarket selections for your 1972 model.
Walker – Exhaust Clamp (Part No.35335)
from
$2.99
Complete your exhaust repair with an Exhaust Mate U-bolt clamp. Designed to ensure a tight, leak-resistant connection, Exhaust Mate hardware is manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- CONNECTS EXHAUST PARTS – Provides secure, leak-resistant connection
- AVAILABLE IN DIFFERENT SIZES – Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS – Made from quality material for durability and long life
- BETTER TOGETHER – Use Walker accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade
In-Demand Exhaust Hangers for 1972 Buick Skylarks
Select from 2 premium Exhaust Hangers parts for your 1972 Buick Skylark, with prices ranging from $16.29 to $28.49.
Walker – Exhaust System Hanger (Part No.35870)
from
$28.49
Complete your exhaust repair with Walker exhaust hangers. Designed with OE-style features to support undercar exhaust components, Walker hangers are manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- KEEPS EXHAUST PARTS IN PLACE – Designed to support undercar exhaust components
- OE DESIGN – Designed with OE-style features for easy installation
- AVAILABLE IN DIFFERENT SIZES – Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS – Made from quality steel for durability and long life
- BETTER TOGETHER – Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
Walker – Exhaust System Hanger (Part No.35871)
from
$16.29
Complete your exhaust repair with Walker exhaust hangers. Designed with OE-style features to support undercar exhaust components, Walker hangers are manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- KEEPS EXHAUST PARTS IN PLACE – Designed to support undercar exhaust components
- OE DESIGN – Designed with OE-style features for easy installation
- AVAILABLE IN DIFFERENT SIZES – Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS – Made from quality steel for durability and long life
- BETTER TOGETHER – Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
Most Sold 1972 Buick Skylark Exhaust Pipes
Explore our best-selling Buick parts for the 1972 Skylark among 2 OEM and aftermarket options starting from $237.99.
Hooker BlackHeart – Hooker BlackHeart Adapter Kit (Part No.70701313-RHKR)
from
$309.99
Product Features:
See More
- Mandrel bent 304SS construction provides enhanced performance and appearance characteristics
- Connects Hooker LS cast iron manifolds to Hooker 2.5″ A-body exhaust systems
- O2 bungs included in each adapter tube are indexed for reliable wide-band sensor operation
- Compatible with all GM automatic transmissions
- Compatible with 4th-gen F-body T56 and T56 Magnum transmissions
- Includes OE quality clamps; requires no cutting or welding to install
Flowmaster Inc. – Prebent Tailpipes – 2.50 in. Rear Exit – Pair (Part No.15802)
from
$237.99
Prebent pipe kits. Flowmaster’s 16 gauge mandrel bent pipe kits are designed to fit perfectly onto your vehicle with all the quality and performance that you would expect from Flowmaster.
See More
Top-Rated Exhaust Parts Brands For Your 1972 Buick Skylark
Shop for the best-rated brands offering Exhaust Parts and other products for your 1972 Buick Skylarks. Below you’ll find some of our best rated Exhaust Parts from Flowmaster Inc., and more. Exhaust Parts from these brands that fit a 1972 Skylark start at just $137.99 and are rated as high as 4.4 stars. OEM and aftermarket Exhaust Parts don’t get more top quality, durable, and affordable than from the brands below.
Popular Flowmaster Inc. 1972 Buick Skylark Exhaust Parts
When it comes to maintaining or upgrading your 1972 Buick Skylark, using quality Exhaust Parts is essential to ensure durability and a perfect fit. Flowmaster Inc. ticks all of those boxes. We offer a wide selection of Flowmaster Inc. Exhaust Parts, specifically designed for the 1972 Buick Skylark. With over 1 Flowmaster Inc. brand Exhaust Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $137.99. Plus, with over 21 customer reviews and an average rating of 4.4 stars, you can trust that our Flowmaster Inc. Exhaust Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$137.99
(21)
Super 44 Series Muffler, 2.5in Offset Inlet 2.5in Offset Outlet, Non-Reversible, Aggressive Sound
“Sounds amazing on my Jeep. Bought with speed perks and online coupon for in store pick up.”
FAQs for 1972 Buick Skylark Exhaust Parts
Which Exhaust Parts are best-sellers for 1972 Buick Skylarks?
Out of 31 Exhaust Parts that fit 1972 Buick Skylarks, the following parts are the top sellers:
- Terminator; Exhaust Tips (19310030) – $93.99
- Quiet-Flow SS Direct Fit Exhaust Muffler 2" Inlet (ID) 2" Outlet (ID) (5291674) – $82.99
- Exhaust System Hanger (18370617) – $28.49
What’s the price range for 1972 Buick Skylark Exhaust Parts?
Exhaust Part prices for the 1972 Buick Skylark start at $2.99 and go up to $1,632.00 for the most premium parts.
What’s the average price of a Exhaust Part for a 1972 Buick Skylark?
The average price for Exhaust Parts for the 1972 Buick Skylark is $465.00. Keep in mind the variety of part types within our Exhaust Part category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Exhaust Parts for other Buick Skylark model years?
What are the cheapest Exhaust Parts for my 1972 Buick Skylark?
The cheapest 1972 Buick Skylark Exhaust Parts we carry in stock are:
- Exhaust Clamp (11012223) – $2.99
- Exhaust System Hanger (18370618) – $16.29
- Exhaust System Hanger (18370617) – $28.49
- Exhsthdrbolt (11776745) – $49.49
- Exhaust Muffler (50167293) – $58.99
What are the top-rated Exhaust Parts that fit the 1972 Buick Skylark?
Out of 208 reviews by customers, our 1972 Buick Skylark Exhaust Parts have an average customer rating of . These are some of the highest-rated Exhaust Part types for the 1972 Buick Skylark and their top-rated products:
- Exhaust Tips
- Terminator; Exhaust Tips (19310030) – $93.99
- Exhaust Mufflers
- Terminator; Exhaust Tips (19310030) – $93.99
What types of Exhaust Parts do you sell for my 1972 Buick Skylark?
As of 3/1/26, these are some of the most in-demand types of Exhaust Parts for a 1972 Buick Skylark:
Can I get help with 1972 Buick Skylark Exhaust Part orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Buick Exhaust Parts and more.
What is your return policy for Buick Skylark Exhaust Parts?
Advance Auto Parts keeps returns simple. For new Buick Skylark Exhaust Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
