1972 Buick LeSabre Valve Cover and Cylinder Heads
More 1972 Buick LeSabre Valve Cover and Cylinder Heads
Find your specific 1972 Buick LeSabre original or aftermarket Valve Cover and Cylinder Heads below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 1972 Buick LeSabre Valve Cover and Cylinder Heads
Mr. Gasket – Ultra Seal: Competition Screw-In Rocker Arm Studs (Part No.1075)
from
$94.99
Mr. Gasket competition screw-in rocker arm studs are manufactured from heat treated black oxide coated Grade 8 steel. Ideal for high performance street and race applications.
Product Features:
See More
Product Features:
- Black Oxide Coated Grade 8 Steel
- Kit Contains 16 Studs
- Easy To Install
- Heat Treated Steel
- Prevents Stud Flexing
- Black Plated Finish
ARP Auto Racing – 1.75"Oal Stud, 0.8"D Adjuster Third, 3/8"-24, 7/16"-14, 0.7"D Screw-In, Set Of 16 (Part No.134-7101)
from
$59.99
If you have ever installed a rocker stud into a cylinder head and watched it wobble as it screwed in, you knew from the beginning that the rocker geometry was going to be inconsistent all over the place. ARP rocker studs are concentric within 0.005 T.I.R. thread pitch to thread pitch. They run in straight and true. Lengths are exact designed to provide positive seating every time. An extra large radius base offers greater resistance to flex. Available in both High Performance and Pro Series models. To be used with ARP patented Perma Loc(TM) adjusters.
Product Features:
See More
Product Features:
- Made Of 8740 Chrome Moly Forgings
- Heat Treated To 180,000 PSI
- Excellent For Elapsed Time Bracket Racing, Limited Rule Oval Track Competition And Street Use
- Lengths Are Exact Designed To Provide Positive Seating Every Time
- Set of 16
- .800″ Adjuster Thread Length
- 3/8-24 Shank Diameter and Thread
- 3/8″ Typical Small Block Application
ARP Auto Racing – ARP Rocker Arm Stud Kit (Part No.234-7201)
from
$99.99
ARP rocker studs are concentric within .005″, extra-large radius base offers greater resistance to flex. Note: To be used ONLY with ARP’s patented Perma-Loc adjusters. Made of 8740 chrome moly forgings and heat-treated to 180,000 PSI. Tip ground flush for optimum adjuster seating.
Product Features:
See More
Product Features:
- 7/16″-14 Thread Size(s)
- .700″ Thread Length
- 8740 Chromoly
- 1.75″ Effective Stud Length
- Set of 16
- .800″ Adjuster Thread Depth
- 3/8″-24 Shank Diameter and Thread
- 3/8″ Typical Small Block Application
- Black Oxide
Felpro – Cylinder Head Gasket Set (Part No.HS 8518 PT)
from
$89.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Application specific design to ensure a perfect fit and premium seal
- Engineered and manufactured specifically for the repair environment
- Contains all the parts needed to complete the repair unless otherwise noted
Felpro – Cylinder Head Gasket Set (Part No.HS 9644 PT-1)
from
$125.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- PROPRIETARY COATING — Nonstick anti-friction coating seals small surface scratches and imperfections
- SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
- NO RETORQUE DESIGN — Steel core helps eliminate the need for retorquing head bolts
- STRONG AND DURABLE — Features graphite or reinforced fiber facing material and steel armor for strength and durability
- DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
Felpro – Cylinder Head Gasket Set (Part No.HS 8264 PT-1)
from
$52.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
Felpro – Cylinder Head Gasket: Composite, Without Head Bolts (Part No.505 SD)
from
$31.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- DESIGNED FOR THE TOUGHEST CONDITIONS — Engineered for hardworking vehicles that operate in severe conditions
- STRONG AND DURABLE — Severe duty steel core gaskets designed slightly thicker to accommodate for machined surfaces
- PREMIUM MATERIALS — High-grade stainless armor enhances strength and corrosion resistance while proprietary coatings enhance sealing and anti-stick properties
- SUPERIOR SEAL — Precise embossed Printoseal sealing beads at all vital areas to eliminate leak paths
- DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
Felpro – Cylinder Head Gasket: Composite, Without Head Bolts (Part No.8264 PT-1)
from
$23.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- PermaTorque head gaskets meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Built to exceed all original equipment specifications
- Provides the robust seal needed to contain peak combustion pressures and temperatures
- Validated for fit, form, and function
- Unsurpassed quality you can trust
Felpro – Cylinder Head Gasket: Composite, Without Head Bolts (Part No.9644 PT)
from
$19.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Requires no retorquing of the head bolts
- Unsurpassed quality you can trust
- Unsurpassed quality you can trust
Sealed Power – Engine Valve Lifter (Part No.HT-817R)
from
$8.49
Speed-Pro delivers the power you need and the value and quality that you deserve. Whether you are running at the track, chasing trophies on the strip, or just cruising down the road, count on Speed-Pro to provide the best value in HP engine components
Product Features:
See More
Product Features:
- Retro-fit performance
- High-strength steel retainer (precisely limits plunger travel to perform at high rpm)
- Eliminates frequent lash adjustments
- Significant friction reduction substantially increases horsepower and fuel economy
- Delivers quieter engine operation
- Application-specific design for perfect fit and correct operation
Edelbrock – Performer-Plus Hydraulic Flat Tappet Lifters (Part No.9738)
Sealed Power – Engine Valve Lifter (Part No.HT-2148)
from
$12.99
Sealed Power parts provide innovative designs, use leading-edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- Unsurpassed quality that you can trust
- Uses leading edge materials
- State-of-the-art manufacturing
- Exacting tolerances
- Meets or exceeds OEM specifications
Edelbrock – Sure Seat Valve Springs (Part No.5825)
from
$147.99
The Edelbrock #5825 Replacement Sure Seat Valve Spring for Edelbrock #5085, 60759, 60909, 60719, 60739, 60999, 60899 & 79899 cylinder heads are made of highest quality spring wire and precision wound to close tolerances.
Product Features:
See More
Product Features:
- Non-Rotator Type
- 1.460 in. Outer Diameter
- Made In The USA
- Single Coil Spring Type
- Set of 16
Edelbrock – Sure Seat Valve Springs for Chrysler 383-400-413-440 V8 1969-79 (Part No.5792)
from
$141.99
Product Features:
See More
- Non-Rotator Type
- 1.550 in. Outer Diameter
- .190 Wire Size
- Single Coil Spring Type
- Set of 16
Sealed Power – Engine Valve Spring (Part No.VS-677)
from
$2.49
Sealed Power parts provide innovative designs, use leading-edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- Unsurpassed quality that you can trust
- Uses leading edge materials
- State-of-the-art manufacturing
- Exacting tolerances
- Meets or exceeds OEM specifications
Edelbrock – Sure Seat Valve Springs for Chevy 262-400 V8 1957-95 (Part No.5802)
from
$60.99
Springs made of highest quality spring wire. Springs precision wound to close tolerances. Non-Rotator style: Dyno tested and street proven. Great match to Edelbrock camshaft kit.
Product Features:
See More
Product Features:
- For Use With Cast Iron Heads
- Springs Made of Highest Quality Spring Wire
- Springs Precision Wound To Close Tolerances
- Use with Original Equipment Heads Only
Edelbrock – RPM Pro Port Pontiac Cylinder Head 72cc Bare (Part No.60509)
from
$929.99
Product Features:
See More
- Out-of-the-Box Bolt-On Performance
- Maximize Performance w/Low-Octane Fuel
- Maximize Streetable Compression
- Patterned After The Ram Air IV Pontiac Cyl. Head
Spartan – Engine Cylinder Head; Chev 305 76-79 Cyl Head (Part No.2C04)
from
$267.99
Remanufactured Cylinder Heads are complete rebuild & include new valve stem seals, soft plugs & verified camshafts. All threads are checked and repaired if necessary. Cylinder Heads are packaged in heavy plastic to protect the unit.
Product Features:
See More
Product Features:
- All cylinder heads are both vacuum and pressure tested to verify valve seating, & integrity of water passages.
- All cylinder heads are packaged in environmentally safe and recyclable containers that are the perfect size for returning your original core
- All threads and machined surfaces are and repaired with technology that exceeds the original metal
- Non-sealing iron surfaces painted to prevent oxidization
Edelbrock – RPM Small-Block Chevy Cylinder Head SBC 70cc Hydraulic Flat Tappet Cam (Part No.60739)
from
$990.99
Product Features:
See More
- Out-of-the-Box Bolt-On Performance
- With Straight Plugs
- 70cc Combustion Chambers Improve Performance
- Retain Stock Compression Ratio
Edelbrock – RPM Pontiac Cylinder Head 72cc Bare (Part No.60589)
from
$870.99
Product Features:
See More
- Bare Single For Hydraulic Roller
- 72cc Combustion Chamber Volume
- 215cc Intake/175cc Exhaust Runner Volume
- 2.11 in. Intake/1.66 in. Exhaust Valve Diameter
- 0.625 in. Deck Thickness
Sealed Power – Push Rod (Part No.RP-3212R 100)
from
$9.49
Speed-Pro delivers the power you need and the value and quality that you deserve. Whether you are running at the track, chasing trophies on the strip, or just cruising down the road, count on Speed-Pro to provide the best value in HP engine components
Product Features:
See More
Product Features:
- Professional racing rods
- 1-Piece forged end rods
- Hardened for guide plate compatibility
- Centerless ground to guarantee concentricity
- Black oxide coated for corrosion protection
- Part numbers are laser etched on each pushrod for positive ID
Sealed Power – Push Rod (Part No.RP-3212R)
from
$8.49
Speed-Pro delivers the power you need and the value and quality that you deserve. Whether you are running at the track, chasing trophies on the strip, or just cruising down the road, count on Speed-Pro to provide the best value in HP engine components
Product Features:
See More
Product Features:
- Professional racing rods
- 1-Piece forged end rods
- Hardened for guide plate compatibility
- Centerless ground to guarantee concentricity
- Black oxide coated for corrosion protection
- Part numbers are laser etched on each pushrod for positive ID
Sealed Power – Engine Push Rod (Part No.RP-3180)
from
$2.99
Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
See More
Sealed Power – Engine Push Rod (Part No.RP-3028)
from
$2.49
Sealed Power« Vintage components provide coverage for applications over 35 years old, restoring classics with like new performance. Leading edge materials, ISO & QS certified manufacturing ensures performance and longevity for treasured engine rebuilds.
See More
Dorman – Steel Cup Expansion Plug 1-1/2 In., Height 0.480 (sold by each) (Part No.555-028)
from
$2.29
This engine expansion plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this engine expansion plug matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Rubber Expansion Plug 1-1/2 In. – Size Range 1-1/2 In. – 1-5/8 In. (sold by each) (Part No.570-009)
from
$8.49
This engine expansion plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this engine expansion plug matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Popular 1972 Buick LeSabre Valve Cover and Cylinder Heads Categories
1972 Buick LeSabre Valve Cover and Cylinder Heads
Maybe you’re in the middle of a full rebuild of that 1972 Buick LeSabre. Maybe you just need a couple of Valve Cover and Cylinder Heads. Either way, Advance Auto Parts has 14 different Valve Cover and Cylinder Heads in our inventory ranging from $2.29 to $1,519.99. That means you can find the exact parts or products you need to keep that 1972 Buick LeSabre running smoothly.
Valve Cover and Cylinder Heads are only as good as their brand. We stock 5 different brands to make sure you have plenty of trusted parts to choose from for your 1972 Buick LeSabre. Sealed Power, Dorman, and Felpro are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Valve Cover and Cylinder Heads for your 1972 Buick LeSabre, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.
So if you’re in the market for aftermarket Valve Cover and Cylinder Heads to keep your 1972 Buick LeSabre rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Valve Cover and Cylinder Heads Brands To Make Your 1972 Buick LeSabre Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 1972 Buick LeSabre demands trusted brand parts and products to keep it running. Many trusted brands of Valve Cover and Cylinder Heads make up Advance Auto Parts’ inventory, and all are ready to help make your LeSabre the best it can be. Be sure to browse some of our top Valve Cover and Cylinder Heads brands and parts.
FAQs for 1972 Buick LeSabre Valve Cover and Cylinder Heads
What are the most purchased Valve Cover and Cylinder Heads for the 1972 Buick LeSabre?
Out of 14 Valve Cover and Cylinder Heads for the 1972 Buick LeSabre, the most popular in our inventory are:
from
$8.49
This product is not rated
Rubber Expansion Plug 1-1/2 In. – Size Range 1-1/2 In. – 1-5/8 In. (sold by each)
Rocker Arm Shaft Plugs
