1972 Buick Electra Differentials

Essential 1972 Buick Electra Differentials

Yukon Gear – Pinion Depth Shim Kit For Toyota8", GM 7.5", 8.2" & 12 Bolt Truck (Part No.55064)

Pinion Depth Shim Kit For Toyota8", GM 7.5", 8.2" & 12 Bolt Truck

from

$39.99
8″ Toyota, 7.5″ GM, 8.2″ GM, 12T, pinion shim set, & Mazda truck.

Product Features:
  • Pinion depth shim kit for Toyota 7.5″, 8″ and V6
See More

Yukon Gear – Dura Grip Positraction For GM 7.5" & 7.625" With 26 Spline Axles, 3.23 & Up (Part No.26017)

Dura Grip Positraction For GM 7.5" & 7.625" With 26 Spline Axles, 3.23 & Up

from

$889.99
The Yukon Dura Grip provides aggressive yet smooth traction to give you the confidence & performance you need. Get longer life and better traction with the heavy duty Yukon Dura Grip Positraction. The Yukon Dura Grip uses a nodular case and forged 4320 internals for added strength along with composite clutches for high performance and long life. All units are Rebuildable and many offer upgrades to increase aggressiveness for racing applications. Each unit carries a one year warranty against defects.

Product Features:
  • Fits GM 7.5″ and 7.625″ with 26 spline axles
  • 3.23 ratio and up only
  • 4-spring, clutch style positraction
  • Internal gears are manufactured using forged 4320 steel and cut to provide stronger teeth
  • Fully rebuildable
  • Assembled in the USA
See More

Yukon Gear – Duragrip Posi For 8.2" Buicks, Olds & Pontiac With 28 Spline Axles (Part No.26024)

Duragrip Posi For 8.2" Buicks, Olds & Pontiac With 28 Spline Axles

from

$929.99
The Yukon Dura Grip provides aggressive yet smooth traction to give you the confidence & performance you need. Get longer life and better traction with the heavy duty Yukon Dura Grip Positraction. The Yukon Dura Grip uses a nodular case and forged 4320 internals for added strength along with composite clutches for high performance and long life. All units are Rebuildable and many offer upgrades to increase aggressiveness for racing applications. Each unit carries a one year warranty against defects. This case is drilled for 3/8″ bolts. Some factory gears use 7/16″ bolts. If your factory gear uses 7/16″ bolts you will need to drill out the ring gear bolt holes.

Product Features:
  • Fits GM 8.2″ in Buick, Oldsmobile and Pontiac
  • 3.31 ratio and up only
  • 4-spring, clutch style positraction
  • Internal gears are manufactured using forged 4320 steel and cut to provide stronger teeth
  • Fully rebuildable
  • Assembled in the USA
See More

Yukon Gear – Pinion Nut Washer (Part No.33167)

Pinion Nut Washer

from

$14.99
Pinion nut washer for GM 7.2″ IFS, 7.5″, 7.6″, 7.6″ IFS, 8.5″, 8.6″ & 9.5″.

Product Features:
  • Pinion nut washer for GM 7.2″ IFS, 7.5″, 7.625″, 7.6″ IFS, 8.5″, 8.6″ and 9.5″.
See More

Powertrax – Lock Right Locker (Part No.1930-LR)

Lock Right Locker

from

$445.99
The Powertrax Lock-Right ultra-strength alloy locker’s straight-line performance is equal to a solid spool, but automatically unlocks in turns. Best suited for extreme off-road to severe on-road use, Powertrax Lock Right lockers replace the spider gears in your open differential carrier using basic tools and without affecting your ring and pinion settings. The whole job can be done in your driveway in a couple of hours, pin included! Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.
  • Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles.
  • Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction.
  • Powertrax® = Extreme Traction Systems!
  • See More

    Yukon Gear – Ring Gear Bolt (Part No.33046)

    Ring Gear Bolt

    from

    $6.99
    Ring gear bolt for GM 12 bolt car & truck, 8.2″, 8.2″ for Buick/Olds/Pontiac, 63-79 Corvette & 55-62 GM Car & Truck. 3/8″ x 24.

    Product Features:
    • Ring gear bolt for GM 12 bolt passenger car and truck, 1955-1964 passenger car and truck, GM 8.2″, 8.2″ Buick, Oldsmobile and Pontiac and 1963-1979 Corvette
    • 3/8″ x 24 thread
    See More

    Motive Gear – Differential Master Bearing Kit – Koyo (Part No.R7.5GRMK)

    Differential Master Bearing Kit - Koyo

    from

    $124.99
    Motive Gear Differential Bearing Kits Include Front & Rear Pinion Bearing, Pinion Seal, Carrier Bearings, Pilot Bearing Where Applicable, Gear Marking Compound, Crush Sleeve, Pinion Nut, Brush, Thread Locking Compound And Cover Gasket Or Rtv

    Product Features:
    • GM 7.5 MASTER KIT BRG & SEAL ’82-98
    See More

    National – Shaft Repair Sleeve (Part No.99193)

    Shaft Repair Sleeve

    from

    $43.99
    National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

    Product Features:
    • Designed to repair damaged, grooved or worn shafts
    • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
    • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
    • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
    • Easy to install with removable flange and installation tool
    • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
    See More

    Yukon Gear – Clutch Guide For GM 7.5" & 7.6" Dura Grip (Part No.33251)

    Clutch Guide For GM 7.5" & 7.6" Dura Grip

    from

    $10.99
    Product Features:
    • Clutch guide
    • Fits GM 7.5″ and 7.625″ Dura Grip
    See More

    Powertrax – Grip LS Traction System (Part No.LS201028)

    Grip LS Traction System

    from

    $463.99
    For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!
    See More

    Yukon Gear – 8.5" & 8.6" GM Standard Open Pinion Gear Thrust Washer – Also Fits 8.5" Eaton With 0.795" Cross Pin (Part No.33385)

    8.5" & 8.6" GM Standard Open Pinion Gear Thrust Washer - Also Fits 8.5" Eaton With 0.795" Cross Pin

    from

    $10.99
    8.5″ & 8.6″ GM standard Open pinion gear Thrust washer. also fits 8.5″ Eaton with 0.795″ cross pin.

    Product Features:
    • Pinion gear thrust washer for GM 8.5″ and 8.6″
    • Fits standard open differentials only
    • 0.795″ I.D.
    See More

    FAG US – CUP (Part No.LM67010)

    CUP

    from

    $6.69
    CUP

    Yukon Gear – Carrier Installation Kit For GM 8.5" Differential With HD Bearings (Part No.57009)

    Carrier Installation Kit For GM 8.5" Differential With HD Bearings

    from

    $148.99
    Yukon Carrier installation kits are great, low cost kit for carrier changes such as Positraction or locker upgrades. Carrier installation kit for GM 8.5″ differential with HD bearings for large journal carrier. This kit contains carrier bearings, races and shims. This kit is used in 8.5″ differentials using a Yukon Dura Grip, Eaton posi, ValueTrac, True Trac, Pro-Series Auburn, Detroit Locker or standard carrier with large bearing journals.

    Product Features:
    • Fits GM 8.5″ with aftermarket positraction
    • Works with Heavy Duty Bearings
    • Includes carrier bearings and races and “super” carrier shim kit
    See More

    Yukon Gear – Cross Pin Shaft For 7.5", 7.625", And 8" GM (Part No.33404)

    Cross Pin Shaft For 7.5", 7.625", And 8" GM

    from

    $57.99
    Cross pin shaft for 7.5″, 7.625″, and 8″ GM.

    Product Features:
    • Cross pin shaft for GM 7.5″, 7.625″ and 8.0″
    • Fits standard open differentials only
    See More

    Yukon Gear – Cross Pin Bolt (Part No.33067)

    Cross Pin Bolt

    from

    $6.99
    Cross pin bolt for Chrysler 8.25″, 9.25″ rear, Ford 7.5″, 8.8″, GM 12 bolt car & truck, 7.2″ IFs, 7.5″, 7.6″, 8.0″, 8.25″ IFS & 8.5″.

    Product Features:
    • Cross pin bolt for Chrysler 8.25″ and 9.25″ rear, Ford 7.5″ and 8.8″, GM 12 botl car and truck, 8.5″, 8.25″ IFS, 8.0″, 7.625″, 7.5″ and 7.2″ IFS
    See More

    Pro-King – Shim Kit (Part No.741A200)

    Shim Kit

    from

    $19.99
    Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

    Product Features:
    • All products are designed to meet or exceed OE quality, form, fit and funtion.
    See More

    Felpro – Differential Cover Gasket (Part No.RDS 55029)

    Differential Cover Gasket

    from

    $7.49
    Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

    Product Features:
    • Meets or exceeds all original equipment specifications
    • Application specific design to ensure a perfect fit
    • Unsurpassed quality you can trust
    • Validated for fit, form and function
    • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
    See More

    Yukon Gear – Standard Open Side Gear Thrust Washer For 8.5" GM (Part No.33304)

    Standard Open Side Gear Thrust Washer For 8.5" GM

    from

    $15.99
    Standard open side gear thrust washer for 8.5″ GM.

    Product Features:
    • Side gear thrust washer
    • Fits GM 8.5″
    See More

    Yukon Gear – Minor Install Kit For GM 8.2" Differential For Buick, Oldsmobile, Pontiac (Part No.12054)

    Minor Install Kit For GM 8.2" Differential For Buick, Oldsmobile, Pontiac

    from

    $153.99
    Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up. kit includes a pinion seal, crush sleeve (if applicable), complete shim kit, marking compound and brush.

    Product Features:
    • Fits 8.2″ Buick, Oldsmobile and Pontiac
    • Included are a pinion seal, crush sleeve, complete shim kit, marking compound and brush.
    See More

    Motive Gear – Pinion Nut (Part No.1260823)

    Pinion Nut

    from

    $8.49
    Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner’s circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.
    See More

    Yukon Gear – Pinion Install Kit For GM 7.5" Differential (Part No.13064)

    Pinion Install Kit For GM 7.5" Differential

    from

    $203.99
    Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

    Product Features:
    • Fits 1982-1999 GM 7.5″ and 7.625″
    • Included are pinion bearings and races, pinion seal, crush sleeve , complete pinion shim kit, and marking compound with brush.
    See More

    Yukon Gear – Bearing Race Driver (Part No.56017)

    Bearing Race Driver

    from

    $215.99
    Bearing race driver. No return.

    Product Features:
    • Bearing race driver
    • Fits HM89410 race
    • All steel construction
    See More

    Yukon Gear – Positraction Internals For 8.5" GM With 28 Spline Axles (Part No.16052)

    Positraction Internals For 8.5" GM With 28 Spline Axles

    from

    $336.99
    Yukon positraction internals (0.795″ diameter) for 8.5″ GM with 28 spline axles. Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. This kit does not include clutches. All components come with a one year warranty against manufacturing defects. This kit is compatible with Yukon Dura Grip or Eaton positractions. It will not fit a factory Gov-Loc positraction.

    Product Features:
    • Spider gear kit
    • Fits GM 8.5″ with 28 spline Dura Grip positraction
    • Includes two side gears, four pinion gears, cross pin shaft, roll pin and spider gear thrust washers.
    See More

    Yukon Gear – Dana 25, 27, 30, 44, Model 20 And Model 35, GM 7.5", 8.2", 8.5", 12P, 12T, C9.25 Rear Cover Bolt (Part No.33286)

    Dana 25, 27, 30, 44, Model 20 And Model 35, GM 7.5", 8.2", 8.5", 12P, 12T, C9.25 Rear Cover Bolt

    from

    $9.99
    5/16″-18 cover bolt, Dana Spicer 25, 27, 30 and 44, AMC Model 20 and Model 35, Chrysler 9.25 rear, GM 7.5″, 7.625″, 8.2″, 8.5″, 12 bolt passenger car and truck.

    Product Features:
    • Cover bolt for Dana Spicer 25, 27, 30 and 44, AMC Model 20 and Model 35, GM 7.5″, 7.625″, 8.2″, 8.5″ and 12 bolt passenger car and truck.
    • 1/2″ head
    See More

    Motive Gear – Differential Gear Install Kit (Part No.GM7.5IK)

    Differential Gear Install Kit

    from

    $49.99


    Product Features:
    • MINI INSTALL KIT GM 7.5
    See More

    Motive Gear – Differential Spool (Part No.FS10-30)

    Differential Spool

    from

    $187.99


    Product Features:
    • FULL SPOOL GM 8.5 30 SPL ST MUST USE 2-LM102911 & 2-LM102949
    See More

    Valvoline – DEX/MERC Automatic Transmission Fluid, 1 Gallon (Part No.773636)

    DEX/MERC Automatic Transmission Fluid, 1 Gallon

    from

    $35.99
    Valvoline DEX/MERC ATF is a high-quality transmission fluid formulated to meet the challenging demands many automatic transmissions. Its responsive low-temperature fluidity is beneficial in both electronic and hydraulic controlled transmissions and transaxles. Recommended for use in the following applications: MERCON®, DEXRON®-III, Ford M2C138-CJ and M2C166-H, Allison C-4 and TES-389, and Caterpillar TO-2.

    Product Features:
    • Formulated with premium base stocks and advanced additive technology to meet the challenging demands of automatic transmissions.
    • Enhanced anti-shudder protection for smooth shifting and maximum power transfer
    • Developed with anti-wear technology to help improve transmission durability
    • Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
    See More

    Felpro – DIFFERENTIAL GASKET (Part No.RDS 55072)

    DIFFERENTIAL GASKET

    from

    $7.99
    Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

    Product Features:
    • Meets or exceeds all original equipment specifications
    • Application specific design to ensure a perfect fit
    • Unsurpassed quality you can trust
    • Validated for fit, form and function
    • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
    See More

    1972 Buick Electra Differentials

    Maybe you’re in the middle of a full rebuild of that 1972 Buick Electra. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 202 different Differentials in our inventory ranging from $1.99 to $1,566.99. That means you can find the exact parts or products you need to keep that 1972 Buick Electra running smoothly.

    Differentials are only as good as their brand. We stock 12 different brands to make sure you have plenty of trusted parts to choose from for your 1972 Buick Electra. Valvoline, FELPRO, and Yukon Gear are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

    We know you’ll find the perfect Differentials for your 1972 Buick Electra, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 1,944 reviews in this category, some of the top rated parts include Bearings with 3.9 stars and Differential Ring and Pinion with 4.5 stars.

    So if you’re in the market for aftermarket Differentials to keep your 1972 Buick Electra rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

    Differentials Brands To Make Your 1972 Buick Electra Last

    Simple repair, complete replacement, or a full rebuild. No matter the job, your 1972 Buick Electra demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your Electra the best it can be. Be sure to browse some of our top Differentials brands and parts.

    Popular Driveworks Differentials

    We carry Driveworks parts in our stock across Differential Pinion Seals categories, plus more. For a 1972 Buick Electra, our most popular Driveworks Differentials include:
    Oil Seal
    from $6.29
    (1)
    Oil Seal
    Differential Pinion Seals

    Top 1972 Buick Electra Differentials from Felpro

    Felpro products are another trusted brand when it comes to Differentials for your 1972 Buick Electra. Popular Felpro parts include:
    Differential Cover Gasket
    from $9.99
    (195)
    Differential Cover Gasket
    Rear Differential Cover Gaskets
    Differential Cover Gasket
    from $7.49
    (7)
    Differential Cover Gasket
    Rear Housing Cover Gaskets

    FAQs for 1972 Buick Electra Differentials

    What are the most purchased Differentials for the 1972 Buick Electra?

    Out of 202 Differentials for the 1972 Buick Electra, the most popular in our inventory are:
    DEX/MERC Automatic Transmission Fluid, 1 Gallon
    from $35.99
    (17)
    DEX/MERC Automatic Transmission Fluid, 1 Gallon
    Differential Oil
    3 Qt - 80W90 Conventional Gear Oil With Posi Additive
    from $57.99
    This product is not rated
    3 Qt – 80W90 Conventional Gear Oil With Posi Additive
    Differential Oil

    What are the top-rated 1972 Buick Electra Differentials?

    Top-rated Differentials for your 1972 Buick Electra based on customer reviews/ratings are:
    Bearings
    from $23.99
    (7)
    Bearings
    “Good price”
    Differential Ring and Pinion
    from $241.99
    (4)
    Differential Ring and Pinion
    “Perfect match and easy install”
    Differential Carrier Shim Kit
    from $8.49
    (3)
    Differential Carrier Shim Kit
    “worked great”