1972 AMC Matador Air Intakes

Name: Standard Flow Carburetor Power Valve #12655 Single Stage 5.5in Hg
Brand: Edelbrock
SKU: 12655
Price: 16.99 USD

Below you will find various in-demand AMC Air Intakes, components and accessories for your 1972 Matador. Advance Auto Parts has popular Matador parts like Carburetor Choke Parts, Carburetor Kits, Intake Manifold Parts and more. You’ll also find aftermarket and OEM Air Intakes for other Matador model years including 1971, 1973, 1974, 1975, 1976, 1977, 1978 and more. Select a category of 1972 AMC Matador Air Intakes below and start saving instantly.

Popular 1972 AMC Matador Air Intakes Categories

Intake Manifolds

Carburetors

Intake Manifold Gasket Sets

Intake Manifold Bolt Sets

Carburetor Calibration Kits

Carburetor and Injector Seal Kits

Carburetor Accelerator Pump Diaphragms

Air Cleaner Mount Gaskets

Carburetor Choke Pull-Offs

Intake Manifold Expansion Plugs

Carburetor and Injector Mount Gaskets

Carburetor Power Valves

Carburetor Needle and Seats

Carburetor Metering Jets

Carburetor Gasket Kit

Carburetor Needle and Seat Hardware Kit

Essential Air Intakes for 1972 AMC Matadors

from

$16.99

Product Features:

The Edelbrock #12645 Single Stage 5.5 Hg Power Valve operates by using engine vacuum to control the opening and closing rate.
During heavy load or under full power situations, they open to supply additional fuel to the main system to eliminate hesitation and bogging, ensuring the smooth delivery of power without any drivability concerns.

from

$62.99

Product Features:

Customize Carburetor Calibration and Performance
Owners Manual has Assembly Help
Includes Metering Rod Retaining Spring
Includes Metering Rods
Includes Metering Jets
Includes Step-Up Springs

from

$18.99

Product Features:

The Edelbrock #12602 Adjustable Inlet Needle and Seat assembly will fit Carburetors with center hung fuel bowls and can be used as replacements or performance upgrades.
Kit includes one locking screw, two gaskets and one O-ring. For use with Holley 2300, 4150, 4160, 4165, 4175 and 4500 Series, Quick Fuel 4500, Professional Series and Q-Series, as well as various Demon Carburetors.

from

$484.99

Product Features:

For Idle to 5500 RPM Street-Driven Performance
Dual-Plane Low-Rise Intake w/180 deg. Firing Order
Patented Runner Design Ensures Broad Torque Curve
Excellent Throttle Response and Mid-Range Power
50-State Street Legal if Correct Carburetor Used

from

$48.49

Mr. Gasket Ultra-Seal Intake Manifold Gasketss are manufactured from cellulose/nitrile composition gasket material. Provides excellent sealing and durability. Incorporates Silicone beading around each intake and water outlet port to provide additional sealing strength on both sides of each gasket. No gasket sealer required.

Product Features:

Manufactured from cellulose/nitrile composition gasket material
Provides excellent sealing and durability
Silicone beading on both sides of each gasket
For OE replacement, high performance street, drag race and oval track use
Silicone Bead Around Port
Creates Tight Leak proof Seal

from

$43.99

Mr. Gasket Performance Intake Gaskets are manufactured from cellulose/nitrile composition gasket material. They provide excellent sealing and durability. Can be trimmed if necessary for modified port applications. For original equipment replacement, high performance street, drag race and oval track.

Product Features:

Manufactured from cellulose/nitrile composition gasket material
Provides excellent sealing and durability
Can be trimmed if necessary for modified port applications
For OE replacement, high performance street, drag race and oval track use

from

$31.99

Edelbrock #12401 50cc Accelerator Pump Diaphragm for 4150 Carburetors. Proper installation is the responsibility of the installer. Improper installation will void your warranty and may result in poor performance and engine or vehicle damage.

Product Features:

Rubber Material
For Holley®, Barry Grant, And Demon Gasoline Carburetors
No Hardware Included
50cc Volume
Made iIn The USA

from

$12.99

Product Features:

The Edelbrock Accelerator Pump Diaphragm 30cc Gasoline #12400 for 4150 Carburetors Proper installation is the responsibility of the installer.
Improper installation will void your warranty and may result in poor performance and engine or vehicle damage

from

$254.99

Made in the USA, this remanufactured carburetor is completely disassembled and all internal parts, such as gaskets, gas filters, needle/seats and accelerator plunger cups, are discarded. All metal castings are thoroughly cleaned and restored to OEM (original equipment manufacturer) finish. Then the carburetor is reassembled to OEM-quality standards using all new component parts. Each carburetor is flow tested to simulate actual engine conditions, and all internal and external adjustments are set to OEM specifications.

from

$492.99

The Edelbrock 14053 Performer Series 600 CFM manual choke Black Powder Coated carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characteristics make the 14053 Performer Series 600 CFM manual choke Black Powder Coated carburetor an outstanding street performer. The first one is that metering rods are utilized to transition between circuits. The carburetor is unaffected by engine backfires, which means that there are no power valves to blow out, and the rods can be changed in seconds without carburetor removal or fuel draining. Secondly, the carburetor has the unique ability to “hold a tune”, so once it is tuned, the carburetor stay’s tuned. What this means to you is that compared to other carburetors, the performance remains consistent and the calibration stays unchanged. The lightweight all-aluminum body features a two-piece body that resists warping and is compatible with gasohol and blended fuels. The simple tub-type bowls and rear-pivot floats all contribute to a carburetor that’s reliable, user-friendly and is easily tunable for miles and miles of trouble-free operation.

Product Features:

Edelbrock products offer improved performance and aesthetics for a broad array of vehicles and engines. ‘Proven performance’ is the philosophy by which Edelbrock was founded and it continues to this day with the highest standards for performance and quali
Manual Choke, Black
4 Barrel Count
Square Bore

from

$43.99

Product Features:

The Edelbrock #12750 4160 Carburetor rebuild kit is for Holley, Demon and Quick Fuel Carburetors.
The kit comes with the necessary components to rebuild a 4160 style Carburetor.

from

$51.99

WVE is a leading source of advanced vehicle electronics components for replacement applications in the automotive aftermarket and original equipment applications. WVE offers high-technology manufacturing along with innovative solutions and improvements to OE designs. Every component either matches or improves on the OE design to ensure fast, easy installation, superior performance and reliability.

from

$19.99

The Edelbrock #12371 kit includes the primary fuel bowl gasket, the primary metering block gasket, the secondary metering block gasket and a metering plate gasket. The Edelbrock #12371 fits Holley 4160 carburetors.

Product Features:

Nitrile Rubber Material
Metering Block Type
Set of 4
Fits Holley® 4160 Carburetors
Made In The USA

from

$14.99

Product Features:

The Edelbrock #12382 fuel bowl gasket is designed for Holley 2300, 4150, 4160, 4175 and 4500 Carburetors.
Kit includes two black nitrile fuel bowl gaskets.

from

$13.99

The Edelbrock 94 #12457 Carburetor Jets .057″Intended for tuning the Edelbrock 94 carburetor, but will also fit original Holly 94’s and its later variations. Jets sold in pairs.

Product Features:

57 Maximum Jet Size
0.056 in. Orifice Diameter
1/14-32 in. Thread Size
Standard Main Jet Type
Set of 2

from

$13.99

The Edelbrock 94 #12456 Carburetor Jets .056″ Intended for tuning the Edelbrock 94 carburetor, but will also fit original Holly 94’s and its later variations. Jets sold in pairs.

Product Features:

56 Maximum Jet Size
0.055 in. Orifice Diameter
1/14-32 in. Thread Size
Standard Main Jet Type
Set of 2

from

$15.49

These grade 5 socket head bolts are zinc plated for protection and appearance. Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds. Includes twelve (12) 3/8-16 x 1 inch bolts & washers.

Product Features:

Grade 5 socket head bolts are zinc plated for protection and appearance
Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds
Washers Included

from

$32.09

These special Grade 8 intake manifold bolts feature a 12-point smaller-than-standard head and flange, and include special extra thick flat washers for optimum clamping pressures. They’re ideal for use where space is minimal, typical on larger runner race manifolds. These bolts and washers are bright zinc plated for protection and good looks.

Product Features:

Features 12-point Smaller-than-standard Bolt Head
Thick Flat Washers Distribute Optimum Clamp Load
Ideal Use Where Space Is Minimal On Race Manifolds
Bolts And Washers Zinc Plated For Protection
Zinc Plated For Protection

from

$13.05

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

Designed to OE standards for ease of installation
Designed and manufactured to our stringent quality standards at a certified facility, so you can install with confidence
Premium components and durable materials withstand harsh engine conditions to increase longevity and lifespan
Undergoes extensive testing and validation for proper performance and peak reliability
As a global manufacturer of automotive aftermarket products, we maintain complete quality control throughout the manufacturing process

from

$12.99

The carburetor is a device used to mix air and vaporized fuel for combustion in old school engine applications. The last year for carburetors in motor vehicles used on the road in the U.S. is listed as 1994. The carburetor was typically a down draft style device where oxygen was drawn from the top of the carburetor pulled in by the engine vacuum through a venturi style opening, just above the venturi were jets, or metered openings where fuel was pulled from a bowl of fuel within the carburetor.

Product Features:

Application matched components ensure carburetor can be returned to like new condition.

from

$2.49

This engine expansion plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this engine expansion plug matches the fit and function of the factory part on specified years, makes and models.
Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$2.29

Direct replacement – this engine expansion plug matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$3.29

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific, providing unsurpassed quality for a seal you can trust
Validated for fit, form, and function
Engineered for the sealing repair environment
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$2.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Unsurpassed quality you can trust
Validated for fit, form and function
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$19.99

The Edelbrock #12370 comes with fuel bowl and metering block gaskets. The Edelbrock #12370 is designed to be used with Holley 2300, 4150, 4160, 4165, and some 4500 carburetors.

Product Features:

Nitrile Rubber Material
Metering Block, Fuel Bowl Type
Set of 4
Fits Holley® 2300, 4150, 4160, 4165, And Some 4500 Carburetors
Made In The USA

from

$13.99

The Edelbrock #12605 Hardware Kit will fit carburetors with center hung fuel bowls and can be used as replacements or performance upgrades. Kit includes one locking screw, two gaskets and one O-ring. For use with Holley 2300, 4150, 4160, 4165, 4175 and 45

Product Features:

Fits Holley® Carburetors With Center Hung Fuel Bowl
Includes Adjusting Nut
Includes Locking Screw
Includes O-Ring
Includes Washers

Upgrade your 1972 AMC Matador with Top-Quality Air Intakes

When it comes to maintaining or upgrading your 1972 AMC Matador, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your AMC or enhancing its overall performance, Air Intakes are key to keeping your Matador functioning at its best. At Advance Auto Parts, we offer a wide selection of 49 Air Intakes for the 1972 AMC Matador, designed to meet your needs without breaking the bank. From Carburetor Choke Part replacements to Carburetor Kits upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Air Intakes for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Air Intakes for your 1972 AMC Matador at great prices. Our Air Intakes inventory for this model ranges from just $1.99 to $589.99, with an average price of $91.74. Our 49 Air Intakes in stock come from 8 trusted brands, so you’re sure to find the right part for your 1972 AMC Matador without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1972 AMC Matador, we stock popular OEM and aftermarket Air Intakes from top names like FELPRO, Edelbrock, Mr. Gasket, and more. FELPRO Air Intakes start at just $1.99 and boast an impressive 5 stars average rating from customers. Edelbrock and Mr. Gasket also bring quality to the table, with Air Intakes available starting at $12.99, and at an average 4 stars rating. With 420 customer reviews and counting, our 1972 AMC Matador Air Intakes have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Air Intake upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1972 AMC Matador is always ready to roll. We’re committed to providing you with everything you need to keep your Matador in top shape, all in one place. Start shopping confidently below for your 1972 AMC Matador!

Best-Selling Carburetor Choke Parts for 1972 AMC Matadors

Enhance the driving experience in your AMC with 2 quality Carburetor Choke Part components, starting at $12.99.

show more show less

from

$13.05

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

Designed to OE standards for ease of installation
Designed and manufactured to our stringent quality standards at a certified facility, so you can install with confidence
Premium components and durable materials withstand harsh engine conditions to increase longevity and lifespan
Undergoes extensive testing and validation for proper performance and peak reliability
As a global manufacturer of automotive aftermarket products, we maintain complete quality control throughout the manufacturing process

from

$12.99

Application matched components ensure carburetor can be returned to like new condition.

Top Picks for 1972 AMC Matador Intake Manifold Parts

Upgrade AMC Matadors with top-quality Intake Manifold Parts parts, including 8 OEM and aftermarket selections for your 1972 model.

show more show less

from

$32.09

Features 12-point Smaller-than-standard Bolt Head
Thick Flat Washers Distribute Optimum Clamp Load
Ideal Use Where Space Is Minimal On Race Manifolds
Bolts And Washers Zinc Plated For Protection
Zinc Plated For Protection

from

$15.49

Grade 5 socket head bolts are zinc plated for protection and appearance
Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds
Washers Included

from

$19.49

Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

from

$2.29

Direct replacement – this engine expansion plug matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$2.49

Direct replacement – this engine expansion plug matches the fit and function of the factory part on specified years, makes and models.
Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$484.99

Product Features:

For Idle to 5500 RPM Street-Driven Performance
Dual-Plane Low-Rise Intake w/180 deg. Firing Order
Patented Runner Design Ensures Broad Torque Curve
Excellent Throttle Response and Mid-Range Power
50-State Street Legal if Correct Carburetor Used

from

$48.49

Manufactured from cellulose/nitrile composition gasket material
Provides excellent sealing and durability
Silicone beading on both sides of each gasket
For OE replacement, high performance street, drag race and oval track use
Silicone Bead Around Port
Creates Tight Leak proof Seal

from

$43.99

Manufactured from cellulose/nitrile composition gasket material
Provides excellent sealing and durability
Can be trimmed if necessary for modified port applications
For OE replacement, high performance street, drag race and oval track use

In-Demand Air Cleaner Parts for 1972 AMC Matadors

Select from 1 premium Air Cleaner Parts parts for your 1972 AMC Matador.

show more show less

from

$3.29

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific, providing unsurpassed quality for a seal you can trust
Validated for fit, form, and function
Engineered for the sealing repair environment
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

Most Sold 1972 AMC Matador Carburetor Parts

Explore our best-selling AMC parts for the 1972 Matador among 27 OEM and aftermarket options starting from $1.99.

show more show less

from

$12.99

Product Features:

The Edelbrock Accelerator Pump Diaphragm 30cc Gasoline #12400 for 4150 Carburetors Proper installation is the responsibility of the installer.
Improper installation will void your warranty and may result in poor performance and engine or vehicle damage

from

$446.99

The Edelbrock AVS2 Series #1906 is a satin-finished four-barrel carburetor with electric choke that is designed and calibrated for optimum street performance in engines that require an air-fuel flow of 650 CFM. The AVS2 is a perfect replacement or upgrade that features annular flow primary boosters with a new calibration for improved off-idle and cruising performance. The annular flow booster design delivers improved fuel atomization to eliminate flat spots that may be encountered as the carburetor transitions from idle to full throttle. Each annular flow booster features eight equally spaced orifices to improve fuel metering from idle to the main circuit. The improved flow metering makes this carburetor ideal for use with a wide variety of small- and big-block engines with either dual- or single-plane intake manifolds. The Edelbrock AVS2 #1906 includes both timed and full vacuum ports for ignition advance. It comes with: .101 primary and.098 secondary metering jets; .070 x .037 metering rods; orange (5″ Hg) step-up spring. Use our Carburetor Stud Kits #8008 or #8024 if needed. Match with a variety of manifolds that include Edelbrock Performer, Performer EPS, RPM Air-Gap, Performer RPM, Torker II or other brands of similar design. For a black-finished AVS2 with electric choke, order part #19063.

Product Features:

Edelbrock products offer improved performance and aesthetics for a broad array of vehicles and engines. ‘Proven performance’ is the philosophy by which Edelbrock was founded and it continues to this day with the highest standards for performance and quali
Electric Choke
4 Barrel Count
Square Bore

from

$3.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Unsurpassed quality you can trust
Validated for fit, form and function
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$2.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Unsurpassed quality you can trust
Validated for fit, form and function
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$407.99

orange (5″ Hg) step-up spring. Use our Carburetor Stud Kits #8008 or #8024 if needed. Match with a variety of manifolds that include Edelbrock Performer, Performer EPS, RPM Air-Gap, Performer RPM, Torker II or other brands of similar design. For a black-f

Product Features:

Edelbrock products offer improved performance and aesthetics for a broad array of vehicles and engines. ‘Proven performance’ is the philosophy by which Edelbrock was founded and it continues to this day with the highest standards for performance and quali
Manual Choke
4 Barrel Count
Square Bore

from

$16.99

Product Features:

The Edelbrock #12665 Single Stage 6.5 Hg Power Valve operates by using engine vacuum to control the opening and closing rate.
During heavy load or under full power situations, they open to supply additional fuel to the main system to eliminate hesitation and bogging, ensuring the smooth delivery of power without any drivability concerns.

from

$1.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Unsurpassed quality you can trust
Validated for fit, form and function
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$20.99

The Edelbrock #12605 Non-Adjustable Inlet Needle and Seat assembly will fit carburetors with center hung fuel bowls and can be used as replacements or performance upgrades. Kit includes one locking screw, two gaskets and one O-ring. For use with Holley 23

Product Features:

Center Hung Floats
0.11 in. Needle Diameter
Viton® Needle Material
Sold Individually
Non-Adjustable Type

from

$18.99

Product Features:

The Edelbrock #12602 Adjustable Inlet Needle and Seat assembly will fit Carburetors with center hung fuel bowls and can be used as replacements or performance upgrades.
Kit includes one locking screw, two gaskets and one O-ring. For use with Holley 2300, 4150, 4160, 4165, 4175 and 4500 Series, Quick Fuel 4500, Professional Series and Q-Series, as well as various Demon Carburetors.

from

$561.99

The Edelbrock 1413 Performer Series 800 CFM electric choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characterist

Product Features:

Edelbrock products offer improved performance and aesthetics for a broad array of vehicles and engines. ‘Proven performance’ is the philosophy by which Edelbrock was founded and it continues to this day with the highest standards for performance and quali
Electric Choke
4 Barrel Count
Square Bore
Smooth Secondary Transition
Both Timed and Full Vacuum Ports
Includes PCV Outlet
Can Easily Calibrate with Rods and Jets

from

$31.99

Rubber Material
For Holley®, Barry Grant, And Demon Gasoline Carburetors
No Hardware Included
50cc Volume
Made iIn The USA

from

$16.99

Product Features:

The Edelbrock #12645 Single Stage 5.5 Hg Power Valve operates by using engine vacuum to control the opening and closing rate.
During heavy load or under full power situations, they open to supply additional fuel to the main system to eliminate hesitation and bogging, ensuring the smooth delivery of power without any drivability concerns.

from

$589.99

AVS2 650 CARBURETOR

from

$543.99

The Edelbrock 14063 Performer Series 600 CFM electric choke black powder coated carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day.

Product Features:

Edelbrock products offer improved performance and aesthetics for a broad array of vehicles and engines. ‘Proven performance’ is the philosophy by which Edelbrock was founded and it continues to this day with the highest standards for performance and quali
Electric Choke, Black
4 Barrel Count
Square Bore

from

$527.99

Product Features:

Edelbrock products offer improved performance and aesthetics for a broad array of vehicles and engines. ‘Proven performance’ is the philosophy by which Edelbrock was founded and it continues to this day with the highest standards for performance and quali
Manual Choke, Black
4 Barrel Count
Square Bore

from

$492.99

Edelbrock products offer improved performance and aesthetics for a broad array of vehicles and engines. ‘Proven performance’ is the philosophy by which Edelbrock was founded and it continues to this day with the highest standards for performance and quali
Manual Choke, Black
4 Barrel Count
Square Bore

from

$348.99

from

$297.99

from

$269.99

from

$19.99

The Edelbrock #12370 comes with fuel bowl and metering block gaskets. The Edelbrock #12370 is designed to be used with Holley 2300, 4150, 4160, 4165, and some 4500 carburetors.

Product Features:

Nitrile Rubber Material
Metering Block, Fuel Bowl Type
Set of 4
Fits Holley® 2300, 4150, 4160, 4165, And Some 4500 Carburetors
Made In The USA

from

$16.99

The Edelbrock #12635 Single Stage 3.5 Hg Power Valve operates by using engine vacuum to control the opening and closing rate. During heavy load or under full power situations, they open to supply additional fuel to the main system to eliminate hesitation

Product Features:

Gasket Or Seal Included
3.5 in. Hg Opening Vacuum
Single Stage
Standard Flow Type
Made In The USA

from

$13.99

The Edelbrock 94 #12459 Carburetor Jets .059″Intended for tuning the Edelbrock 94 carburetor, but will also fit original Holly 94’s and its later variations. Jets sold in pairs.

Product Features:

59 Maximum Jet Size
0.058 in. Orifice Diameter
1/14-32 in. Thread Size
Standard Main Jet Type
Set of 2

from

$13.99

The Edelbrock 94 #12458 Carburetor Jets .058″Intended for tuning the Edelbrock 94 carburetor, but will also fit original Holly 94’s and its later variations. Jets sold in pairs.

Product Features:

58 Maximum Jet Size
0.057 in. Orifice Diameter
1/14-32 in. Thread Size
Standard Main Jet Type
Set of 2

from

$13.99

Fits Holley® Carburetors With Center Hung Fuel Bowl
Includes Adjusting Nut
Includes Locking Screw
Includes O-Ring
Includes Washers

from

$13.99

57 Maximum Jet Size
0.056 in. Orifice Diameter
1/14-32 in. Thread Size
Standard Main Jet Type
Set of 2

from

$13.99

56 Maximum Jet Size
0.055 in. Orifice Diameter
1/14-32 in. Thread Size
Standard Main Jet Type
Set of 2

from

$12.99

The Edelbrock 94 Carburetor power valve block off #12624 is a great way to fine tune your vintage series carburetor. These Edelbrock Power valve Block Off’s will fit Edelbrock Vintage Series 94 carburetors as well as original Holley 94’s and its later var

Product Features:

Fits Any Demon®, Holley®, And Quick Fuel® Carburetors
Includes Gasket
1/2 in. x 28 Power Valve Thread
For Applications That Prefer To Run Carbs Without The Power Valves
Made In The USA

Top-Rated Air Intakes Brands For Your 1972 AMC Matador

Shop for the best-rated brands offering Air Intakes and other products for your 1972 AMC Matadors. Below you’ll find some of our best rated Air Intakes from FELPRO, Edelbrock, and Mr. Gasket, and more. Air Intakes from these brands that fit a 1972 Matador start at just $1.99 and are rated as high as 5 stars. OEM and aftermarket Air Intakes don’t get more top quality, durable, and affordable than from the brands below.

Popular FELPRO 1972 AMC Matador Air Intakes

When it comes to maintaining or upgrading your 1972 AMC Matador, using quality Air Intakes is essential to ensure durability and a perfect fit. FELPRO ticks all of those boxes. We offer a wide selection of FELPRO Air Intakes, specifically designed for the 1972 AMC Matador. With over 4 FELPRO brand Air Intakes in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $1.99, with an average price of just $2.94. Plus, with over 40 customer reviews and an average rating of 5 stars, you can trust that our FELPRO Air Intakes will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from
$1.99

This product is not rated

Carburetor Mounting Gasket

“”

from
$3.29

(39)

Air Cleaner Mounting Gasket

“Just what I needed.”

from
$2.99

This product is not rated

Carburetor Mounting Gasket

“”

Popular Edelbrock 1972 AMC Matador Air Intakes

Edelbrock auto parts is one of the highest quality Air Intake brands in the market. Any 1972 AMC Matador owner should feel confident when installing genuine Edelbrock parts in their vehicle. To ensure the best fit and performance for your 1972 Matador, Advance Auto Parts carries a full inventory of 28 Edelbrock Air Intakes. Plus you will be keeping your AMC in peak condition while saving money because prices on these Edelbrock Air Intakes range from $12.99 to $589.99, plus, with more than 16 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Air Intakes below will deliver on both quality and value.

from
$57.99

This product is not rated

Carburetor Repair Kit #12760 Fits Most Holley 4150 Carburetors

“”

from
$62.99

This product is not rated

Performer Carburetor Calibration Kit #1487 for #1406 Carburetors

“”

from
$43.99

This product is not rated

Carburetor Repair Kit #12750 Fits Most Holley 4160 Carburetors

“”

FAQs for 1972 AMC Matador Air Intakes

Which Air Intakes are best-sellers for 1972 AMC Matadors?

Out of 49 Air Intakes that fit 1972 AMC Matadors, the following parts are the top sellers:

AVS2 1906 Carburetor: 650 CFM, 4 Barrel, Square Bore, Electric Choke Inlet (11920262) – $446.99
Intake Manifold Bolts (6120970) – $15.49
Carburetor Mounting Gasket (5181771) – $2.99

What’s the price range for 1972 AMC Matador Air Intakes?

Air Intake prices for the 1972 AMC Matador start at $1.99 and go up to $589.99 for the most premium parts.

What’s the average price of a Air Intake for a 1972 AMC Matador?

The average price for Air Intakes for the 1972 AMC Matador is $91.74. Keep in mind the variety of part types within our Air Intake category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Air Intakes for other AMC Matador model years?

Yes, we currently carry Air Intakes for 7 model years of AMC Matadors between 1971 and 1978. Air Intakes are bought most frequently for the following model years: 1978, 1977, 1976, 1975, 1974, 1973, and 1971.

What are the cheapest Air Intakes for my 1972 AMC Matador?

The cheapest 1972 AMC Matador Air Intakes we carry in stock are:

Carburetor Mounting Gasket (5182387) – $1.99
Steel Cup Expansion Plug 1 In., SC, Height 0.250 (3492052) – $2.29
Steel Cup Expansion Plug 1 In., SC, Height 0.250 (sold by each) (16140179) – $2.49
Carburetor Mounting Gasket (5181771) – $2.99
Air Cleaner Mounting Gasket (5785448) – $3.29

What are the top-rated Air Intakes that fit the 1972 AMC Matador?

Out of 420 reviews by customers, our 1972 AMC Matador Air Intakes have an average customer rating of . These are some of the highest-rated Air Intake types for the 1972 AMC Matador and their top-rated products:

Carburetor Kits
- Carburetor Gasket Kit #12380 Fits 4150 And 4160 Carburetors (10648305) – $17.99
- Carburetor Gasket Kit #12382 Fits 2300, 4150, 4160, 4175, And 4500 Carburetors (10648624) – $14.99
Air Cleaner Parts
- Carburetor Gasket Kit #12380 Fits 4150 And 4160 Carburetors (10648305) – $17.99
- Carburetor Gasket Kit #12382 Fits 2300, 4150, 4160, 4175, And 4500 Carburetors (10648624) – $14.99
Intake Manifold Parts
- Carburetor Gasket Kit #12380 Fits 4150 And 4160 Carburetors (10648305) – $17.99
- Carburetor Gasket Kit #12382 Fits 2300, 4150, 4160, 4175, And 4500 Carburetors (10648624) – $14.99

What types of Air Intakes do you sell for my 1972 AMC Matador?

As of 2/5/25, these are some of the most in-demand types of Air Intakes for a 1972 AMC Matador:

Can I get help with 1972 AMC Matador Air Intake orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about AMC Air Intakes and more.

What is your return policy for AMC Matador Air Intakes?

Advance Auto Parts keeps returns simple. For new AMC Matador Air Intakes and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1972 AMC Matador Air Intakes

Edelbrock – Standard Flow Carburetor Power Valve #12655 Single Stage 5.5in Hg (Part No.12655)

Edelbrock – Performer Carburetor Calibration Kit #1487 for #1406 Carburetors (Part No.1487)

Edelbrock – Adjustable Carburetor Needle and Seat #12602 Size .097 With Viton Tip (Part No.12602)

Edelbrock – Performer EGR AMC Intake Manifold (Part No.3731)

Mr. Gasket – Ultra Seal: Intake Gasket (Part No.5844)

Mr. Gasket – Intake Gasket (Part No.800G)

Edelbrock – Carburetor Accelerator Pump Diaphragm #12401 50cc (Part No.12401)

Edelbrock – Carburetor Accelerator Pump Diaphragm #12400 30cc (Part No.12400)

United Carb – Remanufactured Carburetor 2 Barrel (Part No.10-10022)

Edelbrock – Performer 14053 Carburetor: 600 CFM, 4 Barrel, Square Bore, Manual Inlet, Black (Part No.14053)

Edelbrock – Carburetor Repair Kit #12750 Fits Most Holley 4160 Carburetors (Part No.12750)

Wells Vehicle Electronics – Carburetor Tune-Up Kit (Part No.2G1867)

Edelbrock – Carburetor Gasket Kit #12371 Fits 4160 Carburetors (Part No.12371)

Edelbrock – Carburetor Gasket Kit #12382 Fits 2300, 4150, 4160, 4175, And 4500 Carburetors (Part No.12382)

Edelbrock – Standard Main Jet Carburetor Metering Jet #12457 Size .056 (Pair) (Part No.12457)

Edelbrock – Standard Main Jet Carburetor Metering Jet #12456 Size .055 (Pair) (Part No.12456)

Mr. Gasket – Intake Manifold Bolts (Part No.955G)

Mr. Gasket – Intake Manifold Bolts (Part No.6091)

Carquest – Carburetor Choke Pull-Off (Part No.779-070)

Wells Vehicle Electronics – Carburetor Choke Pull-Off (Part No.1C1007)

Dorman – Steel Cup Expansion Plug 1 In., SC, Height 0.250 (sold by each) (Part No.555-018)

Dorman – Pik-a-Nut – Steel Cup Expansion Plug 1 In., SC, Height 0.250 (Part No.362633.1)

Felpro – Air Cleaner Mounting Gasket (Part No.60038)

Felpro – Carburetor Mounting Gasket (Part No.60059)

Edelbrock – Carburetor Gasket Kit #12370 Fits 2300, 4150, 4160, 4165, And Some 4500 Carbs (Part No.12370)

Edelbrock – Carb Needle & Seat Hardware Kit #12600 FOR Holley Carb w/ Center Hung Fuel Bowl (Part No.12600)

Carquest – Carburetor Choke Pull-Off (Part No.779-070)

Wells Vehicle Electronics – Carburetor Choke Pull-Off (Part No.1C1007)

Edelbrock – Carburetor Gasket Kit #12380 Fits 4150 And 4160 Carburetors (Part No.12380)

Edelbrock – Carburetor Gasket Kit #12382 Fits 2300, 4150, 4160, 4175, And 4500 Carburetors (Part No.12382)

Edelbrock – Carburetor Repair Kit #12750 Fits Most Holley 4160 Carburetors (Part No.12750)

Edelbrock – Carburetor Repair Kit #12760 Fits Most Holley 4150 Carburetors (Part No.12760)

Edelbrock – Performer Carburetor Calibration Kit #1487 for #1406 Carburetors (Part No.1487)

Wells Vehicle Electronics – Carburetor Tune-Up Kit (Part No.2G1764)

Wells Vehicle Electronics – Carburetor Tune-Up Kit (Part No.2G1822)

Wells Vehicle Electronics – Carburetor Tune-Up Kit (Part No.2G1792)

Wells Vehicle Electronics – Carburetor Tune-Up Kit (Part No.2G1762)

Edelbrock – Carburetor Gasket Kit #12371 Fits 4160 Carburetors (Part No.12371)

Wells Vehicle Electronics – Carburetor Tune-Up Kit (Part No.2G1802)

Mr. Gasket – Intake Manifold Bolts (Part No.6091)

Mr. Gasket – Intake Manifold Bolts (Part No.955G)

Sealed Power – Valley Pan Gasket Set (Part No.260-4008)

Dorman – Pik-a-Nut – Steel Cup Expansion Plug 1 In., SC, Height 0.250 (Part No.362633.1)

Dorman – Steel Cup Expansion Plug 1 In., SC, Height 0.250 (sold by each) (Part No.555-018)

Edelbrock – Performer EGR AMC Intake Manifold (Part No.3731)

Mr. Gasket – Ultra Seal: Intake Gasket (Part No.5844)

Mr. Gasket – Intake Gasket (Part No.800G)

Felpro – Air Cleaner Mounting Gasket (Part No.60038)

Edelbrock – Carburetor Accelerator Pump Diaphragm #12400 30cc (Part No.12400)

Edelbrock – AVS2 1906 Carburetor: 650 CFM, 4 Barrel, Square Bore, Electric Choke Inlet (Part No.1906)

Felpro – Carburetor Mounting Gasket (Part No.60102)

Felpro – Carburetor Mounting Gasket (Part No.60059)

Edelbrock – AVS2 1905 Carburetor: 650 CFM, 4 Barrel, Square Bore, Manual Choke Inlet (Part No.1905)

Edelbrock – Standard Flow Carburetor Power Valve #12665 Single Stage 6.5in Hg (Part No.12665)

Felpro – Carburetor Mounting Gasket (Part No.60304)

Edelbrock – Non-Adjustable Carburetor Needle and Seat #12605 Size .110 With Viton Tip (Part No.12605)

Edelbrock – Adjustable Carburetor Needle and Seat #12602 Size .097 With Viton Tip (Part No.12602)

Edelbrock – Performer 1413 Carburetor: 800 CFM, 4 Barrel, Square Bore, Electric Choke Inlet (Part No.1413)

Edelbrock – Carburetor Accelerator Pump Diaphragm #12401 50cc (Part No.12401)

Edelbrock – Standard Flow Carburetor Power Valve #12655 Single Stage 5.5in Hg (Part No.12655)

Edelbrock – AVS2 650 CARBURETOR (Part No.1906-BP)

Edelbrock – Performer 14063 Carburetor: 600 CFM, 4 Barrel, Square Bore, Electric Inlet, Blk (Part No.14063)

Edelbrock – Performer 14073 Carburetor: 750 CFM, 4 Barrel, Square Bore, Manual Inlet, Black (Part No.14073)

Edelbrock – Performer 14053 Carburetor: 600 CFM, 4 Barrel, Square Bore, Manual Inlet, Black (Part No.14053)

United Carb – Remanufactured Carburetor 1 Barrel (Part No.10-1099)

United Carb – Remanufactured Carburetor 4 Barrel (Part No.10-10018)

United Carb – Remanufactured Carburetor 2 Barrel (Part No.10-10017)

Edelbrock – Carburetor Gasket Kit #12370 Fits 2300, 4150, 4160, 4165, And Some 4500 Carbs (Part No.12370)

Edelbrock – Standard Flow Carburetor Power Valve #12635 Single Stage 3.5in Hg (Part No.12635)

Edelbrock – Standard Main Jet Carburetor Metering Jet #12459 Size .058 (Pair) (Part No.12459)

Edelbrock – Standard Main Jet Carburetor Metering Jet #12458 Size .057 (Pair) (Part No.12458)

Edelbrock – Carb Needle & Seat Hardware Kit #12600 FOR Holley Carb w/ Center Hung Fuel Bowl (Part No.12600)

Edelbrock – Standard Main Jet Carburetor Metering Jet #12457 Size .056 (Pair) (Part No.12457)

Edelbrock – Standard Main Jet Carburetor Metering Jet #12456 Size .055 (Pair) (Part No.12456)

Edelbrock – Carb Power Valve Block-Off Plug #12624 For Demon, Holley, & Quick Fuel Carbs (Part No.12624)