1971 Volkswagen Beetle Belts and Hoses

Essential 1971 Volkswagen Beetle Belts and Hoses

Imperial – 1/2" x 12′ Engine Oil Cooler Hose (Part No.240112)

1/2" x 12' Engine Oil Cooler Hose

from

$48.49
1/2″ x 12′ engine oil cooler hose. Imperial engine hose is specifically designed for engine cooling applications.

Product Features:
  • Engine oil cooler hose
  • Size: 1/2″ x 12′
  • Designed for engine oil applications
  • 12′ hose length accommodates most applications
See More

Imperial – Metal Line Kit for Engine Oil Coolers (Part No.240293)

Metal Line Kit for Engine Oil Coolers

from

$79.99
Metal line kit for engine oil coolers. Routes oil lines past exhaust manifolds.

Product Features:
  • Metal line kit
  • For use in engine oil cooler applications
  • Routes oil lines past exhaust manifolds
  • Provides protection where standard hoses can fail
See More

CRP – Fuel Hose (Part No.E5000859948CRP)

Fuel Hose

from

$110.20
Fuel Hose

CRP – HOSE – FUEL (Part No.4L30010807CRP)

HOSE - FUEL

from

$596.98
HOSE – FUEL

CRP – Hose – Fuel (Part No.4L30010817CRP)

Hose - Fuel

from

$486.90
Hose – Fuel

CRP – Hose – Fuel (Part No.4L30010809CRP)

Hose - Fuel

from

$233.30
Hose – Fuel

ContiTech – Diesel Injection Hose (Part No.D103024165CON)

Diesel Injection Hose

from

$20.37
ContiTech develop and produce complete line systems from the tank through to the engine. The systems comply are cost-efficient and easy-to-install. ContiTech special competence is the manufacture of tight connections between hoses, pipes and fittings and the assemblies to which these are hooked up. Safe and reliable parts are the result. The product range includes supply and return lines and ventilation lines.

Product Features:
  • OE Quality
  • Good AdBlue resistance
  • Safe and reliable
See More

Kayser – Heater Hose (Part No.R303064064KAY)

Heater Hose

from

$28.31
Kayser engine cooling products are designed and manufactured to exceed original equipment (OE) specifications and are engineered to operate in the highly-stressful environment of today’s higher performance cooling systems. The Kayser line of cooling system hoses are designed to meet OE standards and are subjected to rigorous quality and performance tests.

Product Features:
  • All cooling-water hose inner linings are resistant to electrochemical cracking
  • high strength and resistance to oil, mud, salt, road debris, and ozone
  • Resistance to distilled water and water ethylene glycol mixtures
  • Resistance to air temperatures of up to 125C
See More

HJS – Pre Heat Transmission Hose Clamp (Part No.H101155320HJS)

Pre Heat Transmission Hose Clamp

from

$5.92
Pre Heat Transmission Hose Clamp

Driveworks – Automotive V-Belt, Driveworks (Part No.35815)

Automotive V-Belt, Driveworks

from

$5.99
The Driveworks V-Belt is manufactured with top quality components to deliver the maximum power and performance on all passenger cars and light duty trucks in service today.

Product Features:
  • This belt is made with bottom cogs to provide the maximum flexibility and grip required on v-belt drives
  • Polyester cords provide extreme tension-holding capability for longer belt life
  • The raw edge belt design delivers the maximum gripping power
  • The highly engineered rubber compounds are resistant to under hood heat and ozone deterioration
See More

Gates – Automotive XL« High Capacity V-Belt (Part No.9380)

Automotive XL« High Capacity V-Belt

from

$31.49
Replacement belt for the most demanding engine drives. Due to thermal forces, this variable notched belt actually tightens on the drive as it gets hot. This results in improved belt performance by reducing tension decay and noise.

Product Features:
  • Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
  • Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
  • Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
  • Resists oil, heat, ozone, weather and aging for improved belt life
  • Meets or exceeds SAE J636C specifications
See More

Dayco – Bottom Cog V-Belt; 35.75 Inch Long, Exact Fit Premium Quality (Part No.15358)

Bottom Cog V-Belt; 35.75 Inch Long, Exact Fit Premium Quality

from

$12.49
Dayco has combined raw-edge construction and a smooth top to ensure high performance on vehicles and drives that utilize V-belts. The Dayco high performance V-belt delivers more flexibility and increases airflow around the belt so it runs cooler and lasts

Product Features:
  •  Provides greater durability and flexibility – 35% stronger than all previous versions
  • Prevents electromechanical interference issues on modern vehicles
  •  Resists heat, oil and grease
  • Made with specially formulated rubber compounds, this belt is highly resistant to extreme under hood temperatures that can cause premature damage to under engineered rubber compounds
See More

Dayco – Premium Utility V-Belts: 35 In. Outside Circumference, 0.5 In. Width (Part No.L435)

Premium Utility V-Belts: 35 In. Outside Circumference, 0.5 In. Width

from

$19.29
Designed for applications where superior load carrying capacity, extra heavy clutching and reserve bend characteristics are demanded, Dayco GPL premium utility V-belts operate efficiently when subjected to temperature extremes, high humidity, moisture, grit, oil and grease. An aramid fiber cord protects against shock loading and stabilizes belt length. The specially engineered cover, which closely resembles OEM style belts with its salt and pepper pattern, allows for easy product identification and delivers optimum controlled clutching and maximum power transfer.

Product Features:
  • Recommended for light and heavy-duty lawn and garden equipment, farm, shop or industrial applications
  • Engineered for demanding conditions like heavy loads and extra heavy clutching 
  • Provides protection against shock loads and max power transfer
See More

ContiTech – Multi Rib (Serpentine) Belt (Part No.W100089496CON)

Multi Rib (Serpentine) Belt

from

$22.51
ContiTech Serpentine Belts come in a wide range of sizes and are designed to be oil-resistant and temperature-stable from -22F to 176F (-30C to 80C). ContiTech Serpentine Belts deliver 98% power efficiency. While a lower profile design easily handles higher engine revs, reducing noise and providing cooler running temperatures. High performance construction features include polychloroprene rubber cover and body, polyester fiber tensile members, and a ribbed belt design. Installation Note: The manufacturer recommends checking and/or replacing idler and tensioner bearings when replacing the serpentine belts

Product Features:
  • OE-Equivalent.
  • Direct fit for easy installation.
  • Resistant against wear, oil and heat.
  • Temperature-stable from -22F to 176F (30C to 80C).
  • Delivers over 98% power efficiency.
  • High performance construction.
  • Polychloroprene rubber cover and body.
  • Polyester fiber tensile members and a ribbed belt design.
See More

Bando – Multi Rib (Serpentine) Belt (Part No.W100027667BAN)

Multi Rib (Serpentine) Belt

from

$13.29
Bando USA has been a leading OE supplier to automotive manufacturers for over 50 years and Bando serpentine belts are original equipment on over 70% of the top 10 selling vehicles in North America. Bando USA will not compromise on critical quality measurements. Bando belts are produced to the same, more precise OE metric size to deliver an exact fit within the millimeter, ensuring a perfect fit every time. In addition to exact metric sizing, Bando USA aftermarket serpentine belts provide true OE performance for its aftermarket belts, as they are produced on the same manufacturing lines as the OE belts. Installation Note: The manufacturer recommends checking and/or replacing idler and tensioner bearings when replacing the serpentine belts

Product Features:
  • OE-Equivalent.
  • Direct fit for easy installation.
  • Resistant against wear, oil and heat.
  • Strong tensile cords limit stretching.
  • Supports higher horsepower loads.
  • Made from high strength synthetic rubber.
See More

Mitsubishi – Multi-Rib (Serpentine) Belt (Part No.W100061633MBL)

Multi-Rib (Serpentine) Belt

from

$45.23
The Mitsuboshi Multi Rib (Serpentine) Belt meets or exceeds the vehicle manufacturer’s specifications for durability, fit and quality. Installation Note: The manufacturer recommends checking and/or replacing idler and tensioner bearings when replacing the serpentine belts

Product Features:
  • OE-Equivalent.
  • Direct fit for easy installation.
  • Resistant against wear, oil and heat.
See More

Gates – Notched V-Belt: 36.12" Long, 1 Strand, Exact Fit (Part No.9355)

Notched V-Belt: 36.12" Long, 1 Strand, Exact Fit

from

$30.49
Replacement belt for the most demanding engine drives. Due to thermal forces, this variable notched belt actually tightens on the drive as it gets hot. This results in improved belt performance by reducing tension decay and noise.

Product Features:
  • Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
  • Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
  • Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
  • Resists oil, heat, ozone, weather and aging for improved belt life
  • Meets or exceeds SAE J636C specifications
See More

ContiTech – Drive V-Belt (Part No.W100033144CON)

Drive V-Belt

from

$13.00
All ContiTech V-Belts are quiet, OE-quality and virtually service free. The only time these belts require attention is during installation. Designed to be oil-resistant and temperature-stable from -22F to 176F (30C to 80C), ContiTech V-Belts are open-flanked, toothed, and shaped for greater traction and torque. High performance construction features include a synthetic fiber fabric cover, a special polyester cord designed to permit tightly controlled shrink, plus a polychloroprene rubber body, integrally molded cogs, and raw edges.

Product Features:
  • OE-Equivalent.
  • Direct fit for easy installation.
  • Resistant against wear, oil and heat.
  • Polyester fiber tensile members and a ribbed belt design.
See More

Bando – Multi Rib (Serpentine) Belt (Part No.W100028007BAN)

Multi Rib (Serpentine) Belt

from

$20.25
Bando USA has been a leading OE supplier to automotive manufacturers for over 50 years and Bando serpentine belts are original equipment on over 70% of the top 10 selling vehicles in North America. Bando USA will not compromise on critical quality measurements. Bando belts are produced to the same, more precise OE metric size to deliver an exact fit within the millimeter, ensuring a perfect fit every time. In addition to exact metric sizing, Bando USA aftermarket serpentine belts provide true OE performance for its aftermarket belts, as they are produced on the same manufacturing lines as the OE belts. Installation Note: The manufacturer recommends checking and/or replacing idler and tensioner bearings when replacing the serpentine belts

Product Features:
  • OE-Equivalent.
  • Direct fit for easy installation.
  • Resistant against wear, oil and heat.
  • Strong tensile cords limit stretching.
  • Supports higher horsepower loads.
  • Made from high strength synthetic rubber.
See More

Dayco – Premium Timing Belt, 10.63 Inch With 54 Round Tooth, With Grooved Tip (Part No.95348)

Premium Timing Belt, 10.63 Inch With 54 Round Tooth, With Grooved Tip

from

$16.49
Manufactured with tough, wear-resistant fabric, high-tensile strength cord and a molded tooth surface, the Dayco timing belt provides consistent slip-proof power transfer and high resistance to oil and engine heat. The belt features a molded cog design which runs quieter and is more economical and a premium, high modulus glass fiber cord that delivers precise length stability to keep the engine running smoothly over the life of the belt.

Product Features:
  • Designed for specific OHC and DOHC applications that range from normal service to high performance, high temperature engines
  • Offers noise reduction and minimum dimensional tolerances for precise valve timing
  • Engineered with reduced elongation for maximum durability, high abrasion resistance and better performance
  • This belt has a round, reinforced tooth w/ grooved tip profile; designed to fit the timing sprockets precisely
See More

ContiTech – Multi Rib (Serpentine) Belt (Part No.W100054341CON)

Multi Rib (Serpentine) Belt

from

$36.31
ContiTech Serpentine Belts come in a wide range of sizes and are designed to be oil-resistant and temperature-stable from -22F to 176F (-30C to 80C). ContiTech Serpentine Belts deliver 98% power efficiency. While a lower profile design easily handles higher engine revs, reducing noise and providing cooler running temperatures. High performance construction features include polychloroprene rubber cover and body, polyester fiber tensile members, and a ribbed belt design. Installation Note: The manufacturer recommends checking and/or replacing idler and tensioner bearings when replacing the serpentine belts

Product Features:
  • OE-Equivalent.
  • Direct fit for easy installation.
  • Resistant against wear, oil and heat.
  • Temperature-stable from -22F to 176F (30C to 80C).
  • Delivers over 98% power efficiency.
  • High performance construction.
  • Polychloroprene rubber cover and body.
  • Polyester fiber tensile members and a ribbed belt design.
See More

Gates – Notched V-Belt: 38.12" Long, 1 Strand, Exact Fit (Part No.9375)

Notched V-Belt: 38.12" Long, 1 Strand, Exact Fit

from

$37.49
Replacement belt for the most demanding engine drives. Due to thermal forces, this variable notched belt actually tightens on the drive as it gets hot. This results in improved belt performance by reducing tension decay and noise.

Product Features:
  • Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
  • Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
  • Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
  • Resists oil, heat, ozone, weather and aging for improved belt life
  • Meets or exceeds SAE J636C specifications
See More

ContiTech – Multi Rib (Serpentine) Belt (Part No.W100089801CON)

Multi Rib (Serpentine) Belt

from

$22.63
ContiTech Serpentine Belts come in a wide range of sizes and are designed to be oil-resistant and temperature-stable from -22F to 176F (-30C to 80C). ContiTech Serpentine Belts deliver 98% power efficiency. While a lower profile design easily handles higher engine revs, reducing noise and providing cooler running temperatures. High performance construction features include polychloroprene rubber cover and body, polyester fiber tensile members, and a ribbed belt design. Installation Note: The manufacturer recommends checking and/or replacing idler and tensioner bearings when replacing the serpentine belts

Product Features:
  • OE-Equivalent.
  • Direct fit for easy installation.
  • Resistant against wear, oil and heat.
  • Temperature-stable from -22F to 176F (30C to 80C).
  • Delivers over 98% power efficiency.
  • High performance construction.
  • Polychloroprene rubber cover and body.
  • Polyester fiber tensile members and a ribbed belt design.
See More

ContiTech – Drive V-Belt (Part No.W100033123CON)

Drive V-Belt

from

$11.29
All ContiTech V-Belts are quiet, OE-quality and virtually service free. The only time these belts require attention is during installation. Designed to be oil-resistant and temperature-stable from -22F to 176F (30C to 80C), ContiTech V-Belts are open-flanked, toothed, and shaped for greater traction and torque. High performance construction features include a synthetic fiber fabric cover, a special polyester cord designed to permit tightly controlled shrink, plus a polychloroprene rubber body, integrally molded cogs, and raw edges.

Product Features:
  • OE-Equivalent.
  • Direct fit for easy installation.
  • Resistant against wear, oil and heat.
  • Polyester fiber tensile members and a ribbed belt design.
See More

Dayco – Bottom Cog V-Belt; 35.5 Inch Long, Exact Fit Premium Quality (Part No.15355)

Bottom Cog V-Belt; 35.5 Inch Long, Exact Fit Premium Quality

from

$15.79
Dayco has combined raw-edge construction and a smooth top to ensure high performance on vehicles and drives that utilize V-belts. The Dayco high performance V-belt delivers more flexibility and increases airflow around the belt so it runs cooler and lasts longer. Three plies of neoprene impregnated fabric resist heat, oil and grease while a specially-formulated treatment of the polyester cord provides the strength, stability and reliability that are required for one of the most innovative, top-performing V-belts.

Product Features:
  •  Provides greater durability and flexibility – 35% stronger than all previous versions
  • Prevents electromechanical interference issues on modern vehicles
  •  Resists heat, oil and grease
See More

ContiTech – Multi Rib (Serpentine) Belt (Part No.W1000438998CON)

Multi Rib (Serpentine) Belt

from

$22.43
ContiTech Serpentine Belts come in a wide range of sizes and are designed to be oil-resistant and temperature-stable from -22F to 176F (-30C to 80C). ContiTech Serpentine Belts deliver 98% power efficiency. While a lower profile design easily handles higher engine revs, reducing noise and providing cooler running temperatures. High performance construction features include polychloroprene rubber cover and body, polyester fiber tensile members, and a ribbed belt design. Installation Note: The manufacturer recommends checking and/or replacing idler and tensioner bearings when replacing the serpentine belts

Product Features:
  • OE-Equivalent.
  • Direct fit for easy installation.
  • Resistant against wear, oil and heat.
  • Temperature-stable from -22F to 176F (30C to 80C).
  • Delivers over 98% power efficiency.
  • High performance construction.
  • Polychloroprene rubber cover and body.
  • Polyester fiber tensile members and a ribbed belt design.
See More

Driveworks – Automotive V-Belt (Part No.35515)

Automotive V-Belt

from

$5.29
The Driveworks V-Belt is manufactured with top quality components to deliver the maximum power and performance on all passenger cars and light duty trucks in service today.

Product Features:
  • This belt is made with bottom cogs to provide the maximum flexibility and grip required on v-belt drives
  • Polyester cords provide extreme tension-holding capability for longer belt life
  • The raw edge belt design delivers the maximum gripping power
  • The highly engineered rubber compounds are resistant to under hood heat and ozone deterioration
See More

Suncore – Quick Strut Kit (Part No.2-55S11100-001)

Quick Strut Kit

from

$189.99
Quick Strut Kit

1971 Volkswagen Beetle Belts and Hoses

You count on your 1971 Volkswagen Beetle to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Belts and Hoses. With 13 Belts and Hoses ranging in price from $5.29 to $596.98, you’re sure to find everything you need for your 1971 Volkswagen Beetle.

Brands matter. If you want to shop a specific Belts and Hoses brand, we stock 8 different brands like Dayco, Imperial, and Gates. 1971 Volkswagen Beetle Belts and Hoses start as low as $5.29!

One of the best ways to find top quality OEM or aftermarket Belts and Hoses is by asking professionals. Short of that, you can shop with confidence thanks to our 14 extensive product reviews on 1971 Volkswagen Beetle Belts and Hoses.

Did we mention you can order your Belts and Hoses from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Belts and Hoses inventory for your 1971 Volkswagen Beetle below to get started!

Top-Rated Belts and Hoses Brands For Your 1971 Volkswagen Beetle

Trusted Belts and Hoses OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1971 Volkswagen Beetle running right for years to come. In our inventory you’ll find brands like Dayco, Imperial, Gates, and even more.

Popular Dayco Belts and Hoses

You’ll find popular Dayco brand products across Serpentine and V Belts. All are waiting to get your 1971 Volkswagen Beetle back on the road. Some of the top-rated Dayco products in these categories are:

Top-Rated Belts and Hoses


If are what you’re looking for, our inventory holds plenty. We stock brand Belts and Hoses for your 1971 Volkswagen Beetle, and some of our most reviewed parts include:
Automotive V-Belt
from $5.29
(8)
Automotive V-Belt
V-Belts

FAQs for 1971 Volkswagen Beetle Belts and Hoses

What are the most purchased Belts and Hoses for the 1971 Volkswagen Beetle?

Out of 13 Belts and Hoses for the 1971 Volkswagen Beetle, the most popular in our inventory are:
1/2" x 12' Engine Oil Cooler Hose
from $48.49
This product is not rated
1/2" x 12′ Engine Oil Cooler Hose
Engine Oil Cooler Hoses
Metal Line Kit for Engine Oil Coolers
from $79.99
This product is not rated
Metal Line Kit for Engine Oil Coolers
Engine Oil Cooler Hoses
Notched V-Belt: 36.12" Long, 1 Strand, Exact Fit
from $30.49
This product is not rated
Notched V-Belt: 36.12" Long, 1 Strand, Exact Fit
V-Belts