1971 Porsche 911 Steering and Chassis Parts
Find Your Specific 1971 Porsche 911 Steering and Chassis Parts
Below you will find various in-demand Porsche Steering and Chassis Parts, components and accessories for your 1971 911. Advance Auto Parts has popular 911 parts like Steering Shafts, Tie Rods, Ball Joints and more. You’ll also find aftermarket and OEM Steering and Chassis Parts for other 911 model years including
2011,
2012,
2013,
2014,
2015,
2016,
2017,
2018,
2019 and more. Select a category of 1971 Porsche 911 Steering and Chassis Parts below and start saving instantly.
Popular 1971 Porsche 911 Steering and Chassis Parts Categories
Essential Steering and Chassis Parts for 1971 Porsche 911s
APA/URO Parts – Ball Joint Shim (Part No.L2019947540APA)
from
$10.66
Ball Joint Shim
National – Bearings (Part No.LM67010)
from
$5.79
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Driveworks – Taper Bearing Set (Part No.S-A-2)
from
$8.99
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Rare Parts – Tie Rod End (Part No.RP29461)
from
$239.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Restores vehicle handling
- Restores OE alignment
- Reduces tire wear
- Improves steering response
Lemfoerder – ZF/Lemfoerder Tie Rod End (Part No.M3010525910LEM)
from
$117.29
The ultimate in safety and quality in steering and suspension is what sets ZF-LEMFORDER apart. The expertise that Lemfoerder has acquired through ball joint development work with leading automobile manufacturers is the guarantee that increasing demands for safety and comfort will be met. The products developed for the LEMFORDER brand are optimized right through to series maturity in thorough inspections and field trials, and then subjected to the toughest conditions in special wear tests. This approach gives you safety and reliability under all conditions as service and costs only meet the customer’s demands when high quality is implemented systematically.
Product Features:
See More
Product Features:
- OE expertise and quality
- Precision manufactured housing and components
- Corrosion protection
- Permanently attached boot
- One-piece forged housing for easier steering
Original Equipment – Steering Rack Bushin (Part No.M10632241765OEA)
from
$81.59
Steering Rack Bushin
Aftermarket – Tie Rod End (Part No.M301083055OEA)
from
$81.59
Original Equipment tie rod ends meet OE specifications and help to eliminate front-end vibration, shimmy and unsafe handling. The Original Equipment tie rod end is the ORIGINAL part, supplied in a plain box, with the car manufacturer’s logo on the part.
Product Features:
See More
Product Features:
- Original Equipment
- Coated surface to prevent corrosion and rust
- Fatigue tested for structural integrity
- Precision made components for an ideal fit and function
- Adjustable for proper alignment
- Premium Polychloroprene rubber boots
Original Equipment – Sway Bar Bushing (Part No.L105082844OEA)
from
$17.73
The Original Equipment Sway Bar Bushing is manufactured using only the highest quality materials and is designed to reduce road noise and vibration. The Original Equipment Sway Bar Bushing is the ORIGINAL part, supplied in a plain box, with the car manufacturer’s logo on the part.
Product Features:
See More
Product Features:
- OE-Equivalent and direct fit application
- Reduces squeaks, rattles, and vibration noise
- Resistant to oil and other contaminants
- Meets or exceeds OEM specifications
Original Equipment – Sway Bar Bushing (Part No.L1050157100OEA)
from
$17.57
The Original Equipment Sway Bar Bushing is manufactured using only the highest quality materials and is designed to reduce road noise and vibration. The Original Equipment Sway Bar Bushing is the ORIGINAL part, supplied in a plain box, with the car manufacturer’s logo on the part.
Product Features:
See More
Product Features:
- OE-Equivalent and direct fit application
- Reduces squeaks, rattles, and vibration noise
- Resistant to oil and other contaminants
- Meets or exceeds OEM specifications
Original Equipment – Original Equipment Steering Rack Boot (Part No.M101023266OEA)
from
$19.58
The Original Equipment Steering Rack Boot is a high quality original replacement that is manufactured to meet or exceed OE specifications for fit, form, and function. The Original Equipment Steering Rack Boot is the ORIGINAL part, supplied in a plain box, with the car manufacturer’s logo on the part.
Product Features:
See More
Product Features:
- Premium aftermarket replacement
- Manufactured to meet or exceed OE specifications
Beck/Arnley – Steering Rack Boot Kit (Part No.103-2734)
from
$31.99
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.
Product Features:
See More
Product Features:
- Matches OE form, fit and function
- One piece neoprene boot (this is not a split boot)
- Includes boot and two clamps for complete installation.
- Quality construction for durability
- Application specific for this vehicle
APA/URO Parts – Torsion Bar Mount (Part No.L2083655790APA)
from
$68.26
Torsion Bar Mount
Original Equipment – Sway Bar Bracket (Part No.L104033811OEA)
from
$111.70
The Original Equipment Sway Bar Bracket is manufactured using only the highest quality OE materials and is designed to meet OE specifications. The Original Equipment Sway Bar Bracket is the ORIGINAL part, supplied in a plain box, with the car manufacturer’s logo on the part.
Product Features:
See More
Product Features:
- OE-Equivalent and direct fit application
- Meets OE specifications
Original Equipment – Tie Rod Washer (Part No.M3011412048OEA)
from
$6.89
Tie Rod Washer
Original Equipment – Sway Bar Bracket (Part No.L1040668474OEA)
from
$48.65
The Original Equipment Sway Bar Bracket is manufactured using only the highest quality OE materials and is designed to meet OE specifications. The Original Equipment Sway Bar Bracket is the ORIGINAL part, supplied in a plain box, with the car manufacturer’s logo on the part.
Product Features:
See More
Product Features:
- OE-Equivalent and direct fit application
- Meets OE specifications
Sebro – Ball Joint Nut / Was (Part No.L2036653398SEB)
from
$29.99
Ball Joint Nut / Was
Lemfoerder – Lemfoerder Tie Rod Assembly (Part No.M300023265LEM)
from
$101.43
Tie rod assemblies from Lemfoerder with high grade synthetic socket materials provide not only greater resistance but also outstanding slide properties and excellent damping. Highly demanding requirements are put forward for the design/engineering, production, and assembly of Lemfoerder tie rod assemblies.
Product Features:
See More
Product Features:
- Original Equipment Manufacturer
- High grade synthetic socket materials
- Outstanding slide properties
- High ball stud articulation angles.
Upgrade your 1971 Porsche 911 with Top-Quality Steering and Chassis Parts
When it comes to maintaining or upgrading your 1971 Porsche 911, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Porsche or enhancing its overall performance, Steering and Chassis Parts are key to keeping your 911 functioning at its best. At Advance Auto Parts, we offer a wide selection of 19 Steering and Chassis Parts for the 1971 Porsche 911, designed to meet your needs without breaking the bank.
From
Steering Shaft
replacements to
Tie Rods
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Steering and Chassis Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Steering and Chassis Parts for your 1971 Porsche 911 at great prices.
Our Steering and Chassis Parts inventory for this model
ranges from just $5.67 to $407.90, with
an average price of $57.39.
Our 19 Steering and Chassis Parts in stock come from 9 trusted brands, so you’re sure to find the right part for your 1971 Porsche 911 without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1971 Porsche 911, we stock popular OEM and aftermarket Steering and Chassis Parts from top names
like Driveworks, and more.
Driveworks Steering and Chassis Parts
start at just $8.99 and boast an impressive 4 stars average rating from customers.
With 141 customer reviews and counting, our 1971 Porsche 911 Steering and Chassis Parts have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Steering and Chassis Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 1971 Porsche 911 is always ready to roll. We’re committed to providing you with everything you need to keep your 911 in top shape, all in one place.
Start shopping confidently below for your 1971 Porsche 911!
Best-Selling Steering Shafts for 1971 Porsche 911s
Enhance the driving experience in your Porsche with 1 quality Steering Shaft components, starting at $407.90.
Worldpac – STEERING SHAFT UNIVE (Part No.M50182577081APA)
from
$407.90
STEERING SHAFT UNIVE
Most Popular 1971 Porsche 911 Tie Rods
Customize your Porsche with 4 Tie Rods products
like Tie Rod Ends,
Tie Rod Assemblies, and
Tie Rod Washers, all
priced under $101.43.
Lemfoerder – Lemfoerder Tie Rod Assembly (Part No.M300023265LEM)
from
$101.43
Tie rod assemblies from Lemfoerder with high grade synthetic socket materials provide not only greater resistance but also outstanding slide properties and excellent damping. Highly demanding requirements are put forward for the design/engineering, production, and assembly of Lemfoerder tie rod assemblies.
Product Features:
See More
Product Features:
- Original Equipment Manufacturer
- High grade synthetic socket materials
- Outstanding slide properties
- High ball stud articulation angles.
Beck/Arnley – Outer Tie Rod End (Part No.101-3879)
from
$40.99
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.
Product Features:
See More
Product Features:
- Matches OE form, fit and function
- Coated or plated for corrosion protection
- Ball joint is pre-greased
- Easy access wrench flat allows for the use of a socket for easy installation and removal
- Full ball stud
Lemfoerder – ZF/Lemfoerder Tie Rod End (Part No.M301011717LEM)
from
$27.28
The ultimate in safety and quality in steering and suspension is what sets ZF-LEMFORDER apart. The expertise that Lemfoerder has acquired through ball joint development work with leading automobile manufacturers is the guarantee that increasing demands for safety and comfort will be met. The products developed for the LEMFORDER brand are optimized right through to series maturity in thorough inspections and field trials, and then subjected to the toughest conditions in special wear tests. This approach gives you safety and reliability under all conditions as service and costs only meet the customer’s demands when high quality is implemented systematically.
Product Features:
See More
Product Features:
- OE expertise and quality
- Precision manufactured housing and components
- Corrosion protection
- Permanently attached boot
- One-piece forged housing for easier steering
Original Equipment – Tie Rod Washer (Part No.M3011412048OEA)
from
$6.89
Tie Rod Washer
Top Picks for 1971 Porsche 911 Ball Joints
Upgrade Porsche 911s with top-quality Ball Joints parts, including 2 OEM and aftermarket selections for your 1971 model.
Sebro – Ball Joint Nut / Was (Part No.L2036653398SEB)
from
$29.99
Ball Joint Nut / Was
APA/URO Parts – Ball Joint Shim (Part No.L2019947540APA)
from
$10.66
Ball Joint Shim
In-Demand Sway Bars for 1971 Porsche 911s
Select from 6 premium Sway Bars parts for your 1971 Porsche 911, with prices ranging from $5.67 to $55.58.
Original Equipment – Sway Bar Bracket (Part No.L1040668474OEA)
from
$48.65
The Original Equipment Sway Bar Bracket is manufactured using only the highest quality OE materials and is designed to meet OE specifications. The Original Equipment Sway Bar Bracket is the ORIGINAL part, supplied in a plain box, with the car manufacturer’s logo on the part.
Product Features:
See More
Product Features:
- OE-Equivalent and direct fit application
- Meets OE specifications
Worldpac – SWAY BAR BRACKET (Part No.L10403061312OEA)
from
$55.58
SWAY BAR BRACKET
Worldpac – SWAY BAR BRACKET (Part No.L10403061313OEA)
from
$55.58
SWAY BAR BRACKET
APA/URO Parts – Sway Bar Bushing (Part No.L1050650675APA)
from
$18.43
The APA/URO Sway Bar Bushing is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.
Product Features:
See More
Product Features:
- OE-Equivalent and direct fit application
- Reduces squeaks, rattles, and vibration noise
- Resistant to oil and other contaminants
- Meets or exceeds OEM specifications
Original Equipment – Sway Bar Bushing (Part No.L1050650675OEA)
from
$15.56
Sway Bar Bushing
APA/URO Parts – Sway Bar Bushing (Part No.L1050656091APA)
from
$5.67
Sway Bar Bushing
Most Sold 1971 Porsche 911 Power Steering Parts
Explore our best-selling Porsche parts for the 1971 911 among 4 OEM and aftermarket options starting from $5.79.
National – Bearings (Part No.LM67010)
from
$5.79
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Aftermarket – Tie Rod End (Part No.M301083055OEA)
from
$81.59
Original Equipment tie rod ends meet OE specifications and help to eliminate front-end vibration, shimmy and unsafe handling. The Original Equipment tie rod end is the ORIGINAL part, supplied in a plain box, with the car manufacturer’s logo on the part.
Product Features:
See More
Product Features:
- Original Equipment
- Coated surface to prevent corrosion and rust
- Fatigue tested for structural integrity
- Precision made components for an ideal fit and function
- Adjustable for proper alignment
- Premium Polychloroprene rubber boots
Original Equipment – Steering Rack Bushin (Part No.M10632241765OEA)
from
$81.59
Steering Rack Bushin
Original Equipment – Original Equipment Steering Rack Boot (Part No.M101023266OEA)
from
$19.58
The Original Equipment Steering Rack Boot is a high quality original replacement that is manufactured to meet or exceed OE specifications for fit, form, and function. The Original Equipment Steering Rack Boot is the ORIGINAL part, supplied in a plain box, with the car manufacturer’s logo on the part.
Product Features:
See More
Product Features:
- Premium aftermarket replacement
- Manufactured to meet or exceed OE specifications
Top-Rated Steering and Chassis Parts Brands For Your 1971 Porsche 911
Shop for the best-rated brands offering Steering and Chassis Parts and other products for your 1971 Porsche 911s. Below you’ll find some of our best rated Steering and Chassis Parts from Driveworks, and more. Steering and Chassis Parts from these brands that fit a 1971 911 start at just $8.99 and are rated as high as 4 stars. OEM and aftermarket Steering and Chassis Parts don’t get more top quality, durable, and affordable than from the brands below.
Popular Driveworks 1971 Porsche 911 Steering and Chassis Parts
When it comes to maintaining or upgrading your 1971 Porsche 911, using quality Steering and Chassis Parts is essential to ensure durability and a perfect fit. Driveworks ticks all of those boxes. We offer a wide selection of Driveworks Steering and Chassis Parts, specifically designed for the 1971 Porsche 911. With over 1 Driveworks brand Steering and Chassis Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $8.99. Plus, with over 47 customer reviews and an average rating of 4 stars, you can trust that our Driveworks Steering and Chassis Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
FAQs for 1971 Porsche 911 Steering and Chassis Parts
Which Steering and Chassis Parts are best-sellers for 1971 Porsche 911s?
Out of 19 Steering and Chassis Parts that fit 1971 Porsche 911s, the following parts are the top sellers:
- Bearings (3277461) – $5.79
- Sway Bar Bracket (11482343) – $48.65
- SWAY BAR BRACKET (50244097) – $55.58
What’s the price range for 1971 Porsche 911 Steering and Chassis Parts?
Steering and Chassis Part prices for the 1971 Porsche 911 start at $5.67 and go up to $407.90 for the most premium parts.
What’s the average price of a Steering and Chassis Part for a 1971 Porsche 911?
The average price for Steering and Chassis Parts for the 1971 Porsche 911 is $57.39. Keep in mind the variety of part types within our Steering and Chassis Part category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Steering and Chassis Parts for other Porsche 911 model years?
What are the cheapest Steering and Chassis Parts for my 1971 Porsche 911?
The cheapest 1971 Porsche 911 Steering and Chassis Parts we carry in stock are:
- Sway Bar Bushing (12598358) – $5.67
- Bearings (3277461) – $5.79
- Tie Rod Washer (10776037) – $6.89
- Taper Bearing Set (5050499) – $8.99
- Ball Joint Shim (12074380) – $10.66
What are the top-rated Steering and Chassis Parts that fit the 1971 Porsche 911?
Out of 141 reviews by customers, our 1971 Porsche 911 Steering and Chassis Parts have an average customer rating of . These are some of the highest-rated Steering and Chassis Part types for the 1971 Porsche 911 and their top-rated products:
- Steering Knuckles
- Taper Bearing Set (5050499) – $8.99
What types of Steering and Chassis Parts do you sell for my 1971 Porsche 911?
As of 2/5/25, these are some of the most in-demand types of Steering and Chassis Parts for a 1971 Porsche 911:
Can I get help with 1971 Porsche 911 Steering and Chassis Part orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Porsche Steering and Chassis Parts and more.
What is your return policy for Porsche 911 Steering and Chassis Parts?
Advance Auto Parts keeps returns simple. For new Porsche 911 Steering and Chassis Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
