1971 Pontiac GTO Differentials

Essential 1971 Pontiac GTO Differentials

Yukon Gear – Master Overhaul Kit For GM 12 Bolt Passenger Car Differential (Part No.14067)

Master Overhaul Kit For GM 12 Bolt Passenger Car Differential

from

$274.99
Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. Yukon offers more tailor-made kits than any other manufacturer in the industry to meet your specific installation needs. This kit uses Timken bearings and races along with high quality seals and small parts. Included in this kit are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), Thread locking compound, marking compound with brush, and gasket. Yukon’s Master Overhaul kits are the most comprehensive and complete kits on the market. They do extensive research to ensure that every kit is specially tailored to your application. Includes Supershims.

Product Features:
  • Fits GM 12 bolt passenger car
  • Included are Timken bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve , thread locker, marking compound with brush, and gasket.
See More

Yukon Gear – Positraction Cross Pin Bolt For GM 12 Bolt Car And Truck (Part No.33344)

Positraction Cross Pin Bolt For GM 12 Bolt Car And Truck

from

$28.99
Positraction cross pin bolt for GM 12P and 12T.

Product Features:
  • Cross pin bolt for GM 12 bolt passenger car and truck
  • For OEM positraction applications only
See More

Yukon Gear – Pinion Install Kit For GM 8.5" Oldsmobile Rear (Part No.13071)

Pinion Install Kit For GM 8.5" Oldsmobile Rear

from

$249.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:
  • Fits 8.5″ Oldsmobile with 28 spline axles
  • Fits 8.5″ Oldsmobile with 31 spline axles
  • Included are pinion bearings and races, pinion seal, crush sleeve, complete pinion shim kit, and marking compound with brush.
See More

Yukon Gear – Pinion Seal For GM 8.5", 8.2", Buick, Oldsmobile, And Pontiac (Part No.30017)

Pinion Seal For GM 8.5", 8.2", Buick, Oldsmobile, And Pontiac

from

$9.99
Pinion seal for GM 8.5″, 8.2″, Buick, Oldsmobile, and Pontiac.Yukon Mighty seal.

Product Features:
  • Pinion seal
  • Fits GM 8.5″ rear, 8.2″ and 8.2″ in Buick, Oldsmobile and Pontiac
See More

Yukon Gear – Positraction Shim Kit (18 Shims) For GM 8.2", GM 8.5", 12T, 12P, Ford 8.8" & Cast Iron ‘Vette (Part No.16042)

Positraction Shim Kit (18 Shims) For GM 8.2", GM 8.5", 12T, 12P, Ford 8.8" & Cast Iron 'Vette

from

$41.99
Product Features:
  • Shim kit
  • Fits Ford 8.8″, 1963-1979 Corvette, GM 12 bolt passenger car and truck, 8.2″, 8.5″ and 8.6″ Dura Grip positraction
See More

Yukon Gear – Bearing Race Driver (Part No.56017)

Bearing Race Driver

from

$215.99
Bearing race driver. No return.

Product Features:
  • Bearing race driver
  • Fits HM89410 race
  • All steel construction
See More

Yukon Gear – Redi Sleeve For GM 8.5", 9.5" & 8.2" Bop Yokes (Part No.30229)

Redi Sleeve For GM 8.5", 9.5" & 8.2" Bop Yokes

from

$57.99
8.5, 9.5, & 8.2 Buick, Oldsmobile, Pontiac GM REDI sleeve yoke saver.Yukon Mighty seal.

Product Features:
  • Pinion Redi-sleeve
  • Fits GM 8.5″, 9.5″ and 8.2″ Buick, Oldsmobile and Pontiac
See More

FAG US – TAPERED ROLLER BEARI (Part No.KT5)

TAPERED ROLLER BEARI

from

$16.49
TAPERED ROLLER BEARI

Felpro – Differential Cover Gasket (Part No.RDS 55029)

Differential Cover Gasket

from

$7.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Yukon Gear – The Carrier Bearing Puller (Part No.56034)

The Carrier Bearing Puller

from

$689.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to most standard one ton applications. This unit is works with differentials up to one-ton applcations. It is not compatible with Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

Product Features:
  • Carrier bearing puller
  • Works with an impact gun to safely and easliy remove carrrier bearings
  • Not compatible with Dana 70HD, Dana 80, Ford 10.25″ and 10.5″ or Gm and Chrysler 11.5″ applications
See More

Yukon Gear – Positraction Clutch Guide (Part No.33352)

Positraction Clutch Guide

from

$8.99
Positraction clutch guide.

Product Features:
  • Clutch guide for Chrysler 9.25″, Dana Spicer 44, Dana Spicer 50, Ford 8.8″, GM 12 bolt passenger car, GM 8.2″, 8.5″ and 8.6″, 1963-1979 Corvette and Nissan Titan
  • Compatible with Dura Grip positractions only
See More

Yukon Gear – Spider Gear Set For GM 8.2" Buick, Olds, Pontiac Dura Grip Posi, 28 Spline (Part No.16144)

Spider Gear Set For GM 8.2" Buick, Olds, Pontiac Dura Grip Posi, 28 Spline

from

$601.99
Yukon spider gear set for GM 8.2″ Buick, Olds, Pontiac Dura Grip posi, 28 spline. This kit does not include clutches. This kit fits Yukon Dura Grip ONLY.

Product Features:
  • Spider gear kit
  • Fits 8.2″ Buick, Oldsmobile and Pontiac with Dura Grip positraction
  • Includes two side gears, four pinion gears, cross pin shaft, roll pin and spider gear thrust washers.
See More

Yukon Gear – Dana 25, 27, 30, 44, Model 20 And Model 35, GM 7.5", 8.2", 8.5", 12P, 12T, C9.25 Rear Cover Bolt (Part No.33286)

Dana 25, 27, 30, 44, Model 20 And Model 35, GM 7.5", 8.2", 8.5", 12P, 12T, C9.25 Rear Cover Bolt

from

$9.99
5/16″-18 cover bolt, Dana Spicer 25, 27, 30 and 44, AMC Model 20 and Model 35, Chrysler 9.25 rear, GM 7.5″, 7.625″, 8.2″, 8.5″, 12 bolt passenger car and truck.

Product Features:
  • Cover bolt for Dana Spicer 25, 27, 30 and 44, AMC Model 20 and Model 35, GM 7.5″, 7.625″, 8.2″, 8.5″ and 12 bolt passenger car and truck.
  • 1/2″ head
See More

USA Standard Gear – 12 Bolt GM Spartan Locker Cross Pin (Part No.17023)

12 Bolt GM Spartan Locker Cross Pin

from

$49.99
Product Features:
  • USA Standard Gear heavy-duty cross pin shaft
  • Fits GM 12 bolt car and truck and 9.5″ Toyota Landcruiser
  • Works with Spartan Locker or standard open spider gears
See More

Motive Gear – Pinion Nut (Part No.1260823)

Pinion Nut

from

$8.49
Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner’s circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.
See More

National – Bearings (Part No.M802048)

Bearings

from

$23.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Yukon Gear – 8.5" & 8.6" GM Standard Open Pinion Gear Thrust Washer – Also Fits 8.5" Eaton With 0.795" Cross Pin (Part No.33385)

8.5" & 8.6" GM Standard Open Pinion Gear Thrust Washer - Also Fits 8.5" Eaton With 0.795" Cross Pin

from

$10.99
8.5″ & 8.6″ GM standard Open pinion gear Thrust washer. also fits 8.5″ Eaton with 0.795″ cross pin.

Product Features:
  • Pinion gear thrust washer for GM 8.5″ and 8.6″
  • Fits standard open differentials only
  • 0.795″ I.D.
See More

Yukon Gear – 3/8" Ring Gear Bolt Washer For GM 12 Bolt Car & Truck, 8.2 Bop & More (Part No.33347)

3/8" Ring Gear Bolt Washer For GM 12 Bolt Car & Truck, 8.2 Bop & More

from

$4.99
3/8″ ring gear bolt washer for GM 12 bolt car & truck, 8.2 BOP & more.

Product Features:
  • Ring gear bolt washer for GM 12 bolt car and truck, 1955-1964 passenger car, 1963-1979 Corvette and 8.2″ Buick, Oldsmobile and Pontiac
See More

Yukon Gear – Super Carrier Shim Kit For Ford 8.8", GM 12 Bolt Car & Truck, 8.6 & Vette (Part No.55002)

Super Carrier Shim Kit For Ford 8.8", GM 12 Bolt Car & Truck, 8.6 & Vette

from

$59.99
Product Features:
  • Super carrier shim kit for Ford 8.8″, GM 12 bolt passenger car and truck, GM 8.0″, 8.6″, 8.6″ IRS and 1963-1979 Corvette
  • Interlocking design makes installation much easier
See More

Pro-King – Differential Ring Gear Bolt (Part No.742J935)

Differential Ring Gear Bolt

from

$0.91
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

Motive Gear – Crush Sleeve (Part No.1234726)

Crush Sleeve

from

$4.29
Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner’s circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.
See More

Yukon Gear – 8.6" GM 12P 12T & F8.8 Carrier Installation Kit (Part No.57010)

8.6" GM 12P 12T & F8.8 Carrier Installation Kit

from

$121.99
Yukon Carrier installation kits are great, low cost kit for carrier changes such as Positraction or locker upgrades. Carrier installation kit for GM 8.6″, 12 bolt car and 12 bolt truck differential. This kit contains carrier bearings, races and shims.

Product Features:
  • Fits GM 12 bolt passenger car and truck and 8.6″
  • Includes carrier bearings and races and “super” carrier shim kit
See More

USA Standard Gear – Pinion Installation Kit For GM 8.5" Rear (Part No.60012)

Pinion Installation Kit For GM 8.5" Rear

from

$115.99
8.5″ GM PINION KIT .

Product Features:
  • Fits GM 8.5″ rear
  • Uses Koyo bearings and races
  • Included are pinion bearings and races, pinion seal, pinion nut, crush sleeve, marking compound and brush.
See More

USA Standard Gear – Ring & Pinion Gear Set For GM 8.5" In A 5.13 Ratio (Part No.36220)

Ring & Pinion Gear Set For GM 8.5" In A 5.13 Ratio

from

$274.99
USA Standard ring & pinion sets are the right choice to add confidence to your install. USA Standard Gear offers a full line of ring & pinion sets for a variety of common & hard to find applications. USA standard gear offers a standard one year warranty against defects on their ring & pinion sets.

Product Features:
  • Fits GM 8.5″ and 8.6″
  • 8.50″ ring gear diameter
  • 30 spline pinion
  • 10 ring gear bolts
  • 5.13 ratio
See More

USA Standard Gear – 8.5" Oldsmobile 31Spline 12 Bolt (Factory 3.08 Or 3.23, Or Richmond Gear Ring & Pinions) (Part No.59006)

8.5" Oldsmobile 31Spline 12 Bolt (Factory 3.08 Or 3.23, Or Richmond Gear Ring & Pinions)

from

$1020.00
8.5″ Oldsmobile 31spline 12 bolt (factory 3.08 or 3.23, or Richmond gear ring & pinions).

Product Features:
  • Positraction
  • Fits 8.5″ Oldsmobile
  • 12 bolt design
  • 31 spline
  • OEM 3.08 and 3.23 gear sets only
See More

Motive Gear – Differential Gear Install Kit (Part No.GM12IKC)

Differential Gear Install Kit

from

$64.49


Product Features:
  • MINI INSTALL KIT GM 12BLT 8.875 CAR
See More

Motive Gear – Differential Pinion Shim Kit (Part No.1100)

Differential Pinion Shim Kit

from

$7.49
High-quality Differential Component Shim

Product Features:
  • SHIM KIT FITS-8.25-F7.5-AMC20-GM0
See More

Yukon Gear – Yoke For 8.2" Bop Differential, Mech 3R U/Joint Size, U/Bolt Design (Part No.41185)

Yoke For 8.2" Bop Differential, Mech 3R U/Joint Size, U/Bolt Design

from

$289.99
Yukon yoke for 8.2″ BOP differential, Mech 3R u/joint size, u/bolt design. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:
  • Fits GM 8.2″ Buick, Oldsmobile and Pontiac
  • 27 spline
  • Mechanics 3R u-joint size
  • Inside snap ring design
  • 2.556″ snap ring span
  • 1.125″ cap diameter
  • Strap style
See More

1971 Pontiac GTO Differentials

Maybe you’re in the middle of a full rebuild of that 1971 Pontiac GTO. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 284 different Differentials in our inventory ranging from $0.91 to $1,566.99. That means you can find the exact parts or products you need to keep that 1971 Pontiac GTO running smoothly.

Differentials are only as good as their brand. We stock 15 different brands to make sure you have plenty of trusted parts to choose from for your 1971 Pontiac GTO. Valvoline, Yukon Gear, and Motive Gear are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Differentials for your 1971 Pontiac GTO, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 108 reviews in this category, some of the top rated parts include Differential Cover Gasket with 4.4 stars and Differential Master Bearing Kit – Koyo with 3.8 stars.

So if you’re in the market for aftermarket Differentials to keep your 1971 Pontiac GTO rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Differentials Brands To Make Your 1971 Pontiac GTO Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1971 Pontiac GTO demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your GTO the best it can be. Be sure to browse some of our top Differentials brands and parts.

Popular Driveworks Differentials

We carry Driveworks parts in our stock across Differential Pinion Seals categories, plus more. For a 1971 Pontiac GTO, our most popular Driveworks Differentials include:
Oil Seal
from $7.79
(1)
Oil Seal
Differential Pinion Seals
Oil Seal
from $6.29
(1)
Oil Seal
Differential Pinion Seals

FAQs for 1971 Pontiac GTO Differentials

What are the most purchased Differentials for the 1971 Pontiac GTO?

Out of 284 Differentials for the 1971 Pontiac GTO, the most popular in our inventory are:
3 Qt - 80W90 Conventional Gear Oil With Posi Additive
from $57.99
This product is not rated
3 Qt – 80W90 Conventional Gear Oil With Posi Additive
Differential Oil
Bearings
from $23.99
(7)
Bearings
Front Differential Pinion Bearings
Ring Gear Bolt
from $2.49
This product is not rated
Ring Gear Bolt
Differential Ring Gear Bolts

What are the top-rated 1971 Pontiac GTO Differentials?

Top-rated Differentials for your 1971 Pontiac GTO based on customer reviews/ratings are:
Differential Cover Gasket
from $7.49
(7)
Differential Cover Gasket
“good”
Differential Master Bearing Kit - Koyo
from $156.99
(5)
Differential Master Bearing Kit – Koyo
“was delivered as promised and on time”
Differential Carrier Shim Kit
from $8.49
(3)
Differential Carrier Shim Kit
“worked great”