1971 Plymouth Roadrunner Body Parts

Essential Body Parts for 1971 Plymouth Roadrunners

Metro Mould – Dr Lock Pillar Seal (Part No.ALP 7011)

Dr Lock Pillar Seal

from

$66.99
Dr Lock Pillar Seal

Metro Mould – Door Window Seal (Part No.MP 622-E)

Door Window Seal

from

$7.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Ready-to-install Door Weatherstripping that comes with correct tool-installed clips and pins plus molded ends that are truly softer than other available reproductions. All are made of the finest weather resistant and ozone resistant sponge. Rear Window Louver Hinge Pad. For 2-door coupe with rear louvers. 3-3/8 In. wide X 1-1/2 In. long. Each.

Product Features:
  • Jet black to match the color of the original part
  • Dense rubber to match the original
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

Metro Mould – License Plate Bracket (Part No.SB 86)

License Plate Bracket

from

$10.29
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. License Plate Bumper. 7/16 In. O.D. fits a 1/4 In. hole. Each.

Product Features:
  • Jet black to match the color of the original part
  • Dense rubber to match the original
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

Metro Mould – Hood Stop Buffer (Part No.HF 62)

Hood Stop Buffer

from

$6.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Trunk Bumper. Each.

Product Features:
  • Jet black to match the color of the original part
  • Dense rubber to match the original
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

Metro Mould – License Plate Bracket (Part No.SB 123)

License Plate Bracket

from

$5.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. License Plate Bumper. Replaces OEM #2094618. 5/8 In. high, 5/8 In. O.D. Each.

Product Features:
  • Jet black to match the color of the original part
  • Dense rubber to match the original
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

Metro Mould – Hood Stop Buffer (Part No.HF 19)

Hood Stop Buffer

from

$5.79
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Hood Side Bumper. Four used per car. Each.

Product Features:
  • Jet black to match the color of the original part
  • Dense rubber to match the original
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

Metro Mould – Hood Stop Buffer (Part No.SB 130)

Hood Stop Buffer

from

$21.29
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Hood and Trunk Bumper. Each.

Product Features:
  • Jet black to match the color of the original part
  • Dense rubber to match the original
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

Carquest Premium – Door Jamb Switch (Part No.SAA3759)

Door Jamb Switch

from

$10.49
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Metro Mould – Glove Box (Part No.SB 120)

Glove Box

from

$3.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Ashtray Bumper. 9/16 In. Long. Each.

Product Features:
  • Jet black to match the color of the original part
  • Dense rubber to match the original
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

Metro Mould – Glove Box (Part No.SB 121)

Glove Box

from

$6.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Glove Box Bumper. 1/2 In. Long. Each.

Product Features:
  • Jet black to match the color of the original part
  • Dense rubber to match the original
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

Metro Mould – Floor Plug (Part No.SB 127-D)

Floor Plug

from

$16.29
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Trunk and Body Plug. Fits 1-1/8 In. hole. Each.

Product Features:
  • Jet black to match the color of the original part
  • Dense rubber to match the original
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

Metro Mould – Floor Plug (Part No.SB 127)

Floor Plug

from

$9.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Trunk Floor Plug. 2-1/8 In. O.D. Fits 1-3/4 In. hole. Replaces OEM #2189375. Each.

Product Features:
  • Jet black to match the color of the original part
  • Dense rubber to match the original
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

Metro Mould – Cowl Seal (Part No.CS 20-G)

Cowl Seal

from

$89.99
Cowl Seal

Metro Mould – Cowl Seal (Part No.CS 20-Y)

Cowl Seal

from

$65.99
Cowl Seal

Metro Mould – Deck Lid Stop Buffer (Part No.SB 125)

Deck Lid Stop Buffer

from

$69.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Rear Center Hood & Trunk Bumper (’68: Trunk ’70-’74: Hood). 1-1/8 In. high, 15/16 In. O.D. Each.

Product Features:
  • Jet black to match the color of the original part
  • Dense rubber to match the original
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

Carquest Premium – Door Lock Kit (Part No.DLC1238)

Door Lock Kit

from

$20.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – Starter Relay (Part No.SAC1174)

Starter Relay

from

$59.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

KAI – Window Crank Handle (Part No.GMK211242175)

Window Crank Handle

from

$7.99
New Goodmark Window Crank Handle

Product Features:
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Window Crank Handle (Part No.GMK211142168)

Window Crank Handle

from

$11.99
New Goodmark Window Crank, All Mopar Cars

Product Features:
  • All Mopar Cars
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Metro Mould – Qtr Pillar Pst Seal (Part No.ALP 7019)

Qtr Pillar Pst Seal

from

$79.99
Qtr Pillar Pst Seal

Metro Mould – Door Window Seal (Part No.ALP 7002)

Door Window Seal

from

$32.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Ready-to-install Door Weatherstripping that comes with correct tool-installed clips and pins plus molded ends that are truly softer than other available reproductions. All are made of the finest weather resistant and ozone resistant sponge. Molded Door Lock Pillar Seal. Made with steel core. Pair. R&L.

Product Features:
  • Jet black to match the color of the original part
  • Dense material to match the original
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

Metro Mould – Dr Lock Pillar Seal (Part No.ALP 7014)

Dr Lock Pillar Seal

from

$66.99
Dr Lock Pillar Seal

Upgrade your 1971 Plymouth Roadrunner with Top-Quality Body Parts

When it comes to maintaining or upgrading your 1971 Plymouth Roadrunner, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Plymouth or enhancing its overall performance, Body Parts are key to keeping your Roadrunner functioning at its best. At Advance Auto Parts, we offer a wide selection of 21 Body Parts for the 1971 Plymouth Roadrunner, designed to meet your needs without breaking the bank. From Vehicle Latches and Handle replacements to Vehicle Doors upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Body Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Body Parts for your 1971 Plymouth Roadrunner at great prices. Our Body Parts inventory for this model ranges from just $5.79 to $108.99, with an average price of $35.95. Our 21 Body Parts in stock come from 3 trusted brands, so you’re sure to find the right part for your 1971 Plymouth Roadrunner without overspending.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Body Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1971 Plymouth Roadrunner is always ready to roll. We’re committed to providing you with everything you need to keep your Roadrunner in top shape, all in one place. Start shopping confidently below for your 1971 Plymouth Roadrunner!

Best-Selling Vehicle Latches and Handles for 1971 Plymouth Roadrunners

Enhance the driving experience in your Plymouth with 1 quality Vehicle Latches and Handle components, starting at $11.99.

KAI – Window Crank Handle (Part No.GMK211142168)

Window Crank Handle

from

$11.99
New Goodmark Window Crank, All Mopar Cars

Product Features:
  • All Mopar Cars
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Most Popular 1971 Plymouth Roadrunner Vehicle Doors

Customize your Plymouth with 6 Vehicle Doors products like Door Jamb Switches, Door Lock Kits, and Door Window Seals, all priced under $66.99.

Carquest Premium – Door Jamb Switch (Part No.SAA3759)

Door Jamb Switch

from

$10.49
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Metro Mould – Dr Lock Pillar Seal (Part No.ALP 7014)

Dr Lock Pillar Seal

from

$66.99
Dr Lock Pillar Seal

Metro Mould – Dr Lock Pillar Seal (Part No.ALP 7011)

Dr Lock Pillar Seal

from

$66.99
Dr Lock Pillar Seal

Metro Mould – Dr Lock Pillar Seal (Part No.ALP 7012)

Dr Lock Pillar Seal

from

$59.99
Dr Lock Pillar Seal

Carquest Premium – Door Lock Kit (Part No.DLC1238)

Door Lock Kit

from

$20.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Metro Mould – Door Window Seal (Part No.MP 622-E)

Door Window Seal

from

$7.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Ready-to-install Door Weatherstripping that comes with correct tool-installed clips and pins plus molded ends that are truly softer than other available reproductions. All are made of the finest weather resistant and ozone resistant sponge. Rear Window Louver Hinge Pad. For 2-door coupe with rear louvers. 3-3/8 In. wide X 1-1/2 In. long. Each.

Product Features:
  • Jet black to match the color of the original part
  • Dense rubber to match the original
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

Top Picks for 1971 Plymouth Roadrunner Vehicle Hoods

Upgrade Plymouth Roadrunners with top-quality Vehicle Hoods parts, including 6 OEM and aftermarket selections for your 1971 model.

Metro Mould – Cowl Seal (Part No.CS 20-Y)

Cowl Seal

from

$65.99
Cowl Seal

Metro Mould – Hood Stop Buffer (Part No.SBK 2324)

Hood Stop Buffer

from

$108.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Snap-In-Bumper Kit. 20-Piece Set Includes: (4)DB 53, (2)HA 8-A, (2)HF 19-A, (2)HF 62, (2)SB 121, (2)SB 122, (2)SB 124, (1)SB 125, (3)SB 86

Product Features:
  • Jet black to match the color of the original part
  • Dense rubber to match the original
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

Metro Mould – Cowl Seal (Part No.CS 20-G)

Cowl Seal

from

$89.99
Cowl Seal

Metro Mould – Deck Lid Stop Buffer (Part No.SB 125)

Deck Lid Stop Buffer

from

$69.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Rear Center Hood & Trunk Bumper (’68: Trunk ’70-’74: Hood). 1-1/8 In. high, 15/16 In. O.D. Each.

Product Features:
  • Jet black to match the color of the original part
  • Dense rubber to match the original
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

Metro Mould – Hood Stop Buffer (Part No.SB 124)

Hood Stop Buffer

from

$7.49
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Hood and Trunk Bumper. Replaces OEM #2785714. Each.

Product Features:
  • Jet black to match the color of the original part
  • Dense rubber to match the original
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

Metro Mould – Hood Stop Buffer (Part No.HF 19)

Hood Stop Buffer

from

$5.79
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Hood Side Bumper. Four used per car. Each.

Product Features:
  • Jet black to match the color of the original part
  • Dense rubber to match the original
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

In-Demand Bodies and Fender Parts for 1971 Plymouth Roadrunners

Select from 3 premium Bodies and Fender Parts parts for your 1971 Plymouth Roadrunner, with prices ranging from $9.99 to $16.29.

Metro Mould – Floor Plug (Part No.SB 127-D)

Floor Plug

from

$16.29
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Trunk and Body Plug. Fits 1-1/8 In. hole. Each.

Product Features:
  • Jet black to match the color of the original part
  • Dense rubber to match the original
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

Metro Mould – Floor Plug (Part No.SB 127-E)

Floor Plug

from

$11.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Trunk and Body Plug. Fits 1-15/16 In. hole. Each.

Product Features:
  • Jet black to match the color of the original part
  • Dense rubber to match the original
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

Metro Mould – Floor Plug (Part No.SB 127)

Floor Plug

from

$9.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Trunk Floor Plug. 2-1/8 In. O.D. Fits 1-3/4 In. hole. Replaces OEM #2189375. Each.

Product Features:
  • Jet black to match the color of the original part
  • Dense rubber to match the original
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

Most Sold 1971 Plymouth Roadrunner Bumpers

Explore our best-selling Plymouth parts for the 1971 Roadrunner among 4 OEM and aftermarket options starting from $5.99.

Metro Mould – Bumper (Part No.SM 72)

Bumper

from

$40.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. License Light Wire Grommet. Each.

Product Features:
  • Jet black to match the color of the original part
  • Dense rubber to match the original
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

Metro Mould – Deck Lid Stop Buffer (Part No.SB 125-A)

Deck Lid Stop Buffer

from

$8.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Trunk Bumper. Each.

Product Features:
  • Jet black to match the color of the original part
  • Dense rubber to match the original
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

Metro Mould – Glove Box (Part No.SB 121)

Glove Box

from

$6.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Glove Box Bumper. 1/2 In. Long. Each.

Product Features:
  • Jet black to match the color of the original part
  • Dense rubber to match the original
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

Metro Mould – License Plate Bracket (Part No.SB 123)

License Plate Bracket

from

$5.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. License Plate Bumper. Replaces OEM #2094618. 5/8 In. high, 5/8 In. O.D. Each.

Product Features:
  • Jet black to match the color of the original part
  • Dense rubber to match the original
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

FAQs for 1971 Plymouth Roadrunner Body Parts

Which Body Parts are best-sellers for 1971 Plymouth Roadrunners?

Out of 21 Body Parts that fit 1971 Plymouth Roadrunners, the following parts are the top sellers:

What’s the price range for 1971 Plymouth Roadrunner Body Parts?

Body Part prices for the 1971 Plymouth Roadrunner start at $5.79 and go up to $108.99 for the most premium parts.

What’s the average price of a Body Part for a 1971 Plymouth Roadrunner?

The average price for Body Parts for the 1971 Plymouth Roadrunner is $35.95. Keep in mind the variety of part types within our Body Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Body Parts for other Plymouth Roadrunner model years?

Yes, we currently carry Body Parts for 7 model years of Plymouth Roadrunners between 1968 and 1975. Body Parts are bought most frequently for the following model years: 1975, 1974, 1973, 1972, 1970, 1969, and 1968.

What are the cheapest Body Parts for my 1971 Plymouth Roadrunner?

The cheapest 1971 Plymouth Roadrunner Body Parts we carry in stock are:

What types of Body Parts do you sell for my 1971 Plymouth Roadrunner?

As of 2/5/25, these are some of the most in-demand types of Body Parts for a 1971 Plymouth Roadrunner:

Can I get help with 1971 Plymouth Roadrunner Body Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Plymouth Body Parts and more.

What is your return policy for Plymouth Roadrunner Body Parts?

Advance Auto Parts keeps returns simple. For new Plymouth Roadrunner Body Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.