1971 Plymouth GTX Drivetrains
More 1971 Plymouth GTX Drivetrains Categories
If you’re looking for an original Drivetrains replacement for a 1971 Plymouth GTX, you can search through our selection below. You’ll also find aftermarket and OEM Drivetrains to meet your needs.
Essential 1971 Plymouth GTX Drivetrains
Valvoline – MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Quart (Part No.VV324)
from
$12.79
Product Features:
See More
- High-performance seal conditioners maintain and preserve the elasticity of seals to help prevent leaks
- Long-life friction modifiers and premium base oils help improve smooth shifting, eliminate slippage and shudder, prevent clutch wear and improve drivability longer than conventional fluids
- Enhanced cleaning additives help reduce varnish formation and keep the transmission running properly longer
- Engineered with a unique blend of viscosity modifiers and base oils to provide better oil flow at low temperatures and greater film protection at higher temperatures
National – Multi Purpose Seal (Part No.7216)
from
$41.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Yukon Gear – Yoke For Chrysler 9.25" With A 7260 U/Joint Size. (Part No.41001)
from
$289.99
Yukon yoke for Chrysler 9.25″ with a 7260 U/joint size. 2.125″ snap ring span, 1.078″ cap diameter. Inside snap ring.All Yukon yokes come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits Chrysler 9.25″ rear
- 29 spline
- 7260 u-joint size
- Inside snap ring design
- 2.125″ snap ring span
- 1.078″ cap diameter
- Strap style
USA Standard Gear – Spartan Spring & Pin Kit, Fits Smaller Designs (Part No.17011)
from
$26.99
Spartan spring & pin kit, fits smaller designs.
Product Features:
See More
Product Features:
- Replacement spring and pin kit for Spartan Locker
- Fits Dana 30, Dana 44, AMC Model 20, AMC Model 35, and Toyota designs
- Includes 4 springs and 4 alignment pins
Yukon Gear – Redi-Sleeve Yoke Saver For 8.75" C, 9.25" C, Dana 60, Dana 61, Dana 70, Dana 70U, Dana 70HD (Part No.30228)
from
$37.99
Replacement redi-sleeve yoke saver for 8.75″ c, 9.25″ c, Dana 60, Dana 61, Dana 70, Dana 70U, Dana 70HD .Yukon Mighty seal.
Product Features:
See More
Product Features:
- Redi-Sleeve yoke saver
- Fits Chrysler 8.75″ and 9.25″ rear, Dana Spicer 60, 70, 70U and 70HD
Yukon Gear – 9.25" Chrysler C/Clip (Part No.33075)
from
$17.99
9.25″ Chrysler C/clip, 0.205″ wide for 4137429 axle.
Product Features:
See More
Product Features:
- c-clip for Chrysler 9.25″ rear
- 0.205″ thick
Yukon Gear – Steel Cover For Dana 60 Standard Rotation (Part No.32321)
USA Standard Gear – Master Overhaul Kit For Chrysler 8.75" #42 Housing With LM104912/49 Carrier Bearings (Part No.37090)
from
$441.99
USA Standard Master Overhaul kits let you finish your install with confidence. This kit uses Koyo bearings and races. Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), threading locking compound, marking compound with brush and gasket.
Product Features:
See More
Product Features:
- Fits Chrysler 8.75″ ’42’ case housing with LM104912 carrier races
- Uses Koyo bearings and races
- Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve, thread locker, marking compound with brush and gasket.
Yukon Gear – Positraction Clutch Guide (Part No.33352)
from
$8.99
Positraction clutch guide.
Product Features:
See More
Product Features:
- Clutch guide for Chrysler 9.25″, Dana Spicer 44, Dana Spicer 50, Ford 8.8″, GM 12 bolt passenger car, GM 8.2″, 8.5″ and 8.6″, 1963-1979 Corvette and Nissan Titan
- Compatible with Dura Grip positractions only
Yukon Gear – 8.25" Chrysler Cover Gasket (Part No.23000)
Yukon Gear – Powr Lok Button Kit For Dana 30, Dana 44 & Chrysler 8.75" (Part No.33536)
from
$67.99
Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses t
Product Features:
See More
Product Features:
- Powr Lok button kit
- Fits Dana Spicer 30, 44 and Chrysler 8.75″
Yukon Gear – The Carrier Bearing Puller (Part No.56072)
from
$883.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to one ton applications including Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.
Product Features:
See More
Product Features:
- Carrier bearing puller
- Works with an impact gun to safely and easliy remove carrrier bearings
Yukon Gear – Yoke For Chrysler 8.75" With 10 Spline Pinion And A 7260 U/Joint Size (Part No.41006)
from
$213.99
Yukon yoke for Chrysler 8.75″ with 10 spline pinion and a 7260 U/joint size. 2.125″ snap ring span, 1.078″ cap diameter. Inside snap ring.This yoke uses straps. All Yukon yokes come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits Chrysler 8.75″
- 10 spline
- 7260 u-joint size
- Inside snap ring design
- 2.125″ snap ring span
- 1.078″ cap diameter
- Strap style
Yukon Gear – Replacement Trac Loc Carrier Case, Dana 60, 4.10 & Down (Part No.20043)
from
$509.99
Product Features:
See More
- Trac Loc positraction carrier case
- Does not include spider gears
- Fits Dana Spicer 60
- 4.10 and down ratio only
- ABS and non-ABS compatible
Yukon Gear – Replacement Positraction Internals For Dana 60 (Full- And Semi-Floating) With 35 Spline Axles (Part No.16088)
from
$659.99
Yukon replacement positraction internals for Dana 60 (full- and semi-floating) with 35 spline axles. Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. This kit includes clutches. All components come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Spider gear kit
- Fits Dana Spicer 60 with Trac Loc positraction with 35 spline axles
- Includes two side gears, two pinion gears, cross pin shaft, roll pin and spider gear thrust washers.
Yukon Gear – Seal Housing For Dana 60, Zip Locker, With O-Rings (Part No.34039)
from
$79.99
Seal housing for Dana 60, Zip locker, with o-rings.
Product Features:
See More
Product Features:
- Seal housing for Dana Spicer 60
- Includes o-rings
Yukon Gear – 1541H Alloy Rear Axle For Chrysler 8.75" (Part No.21408)
from
$284.99
Yukon 1541H alloy cut to fit rear axle for Chrysler 8.75″ measuring 28″-32″ with 30 splines and 5×4.5 bolt pattern. for use with A, C & E-Body. Yukon 1541H alloy axles offer a strength increase over stock while retaining a low cost. Yukon 1541H alloy rear axles come with a one year warranty against manufacturing defects. Must use Green bearing.
Product Features:
See More
Product Features:
- Fits Chrysler 8.75″
- 30 spline
- Cut to length design fits 28″-32″ applcations
- 5 x 4.5″ bolt pattern
Driveworks – Tapered Roller Bearing (Part No.S-HM-89443)
Motive Gear – Drive Shaft Pinion Yoke (Part No.MG1310-6010)
Yukon Gear – Dana 60 & Dana 70 Power Lok Case Bolt (Part No.33236)
from
$7.99
Dana 60 & Dana 70 Power Lok case bolt.
Product Features:
See More
Product Features:
- Power Lok case bolt for Dana Spicer 60 and 70
- 7/16 x 14 thread
- 3.5″ long
- 9/16″ hex head
National – Bearings (Part No.HM88510)
from
$14.29
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Yukon Gear – Replacement Cover Gasket For Dana 50, Dana 60 & Dana 70 (Part No.23007)
Yukon Gear – 9.25" Cross Pin Shaft Tracloc Only, Not Standard Open 0.870" Diameter (Part No.33310)
from
$57.99
9.25″ cross pin shaft TracLoc ONLY, not standard Open 0.870″ DIA.
Product Features:
See More
Product Features:
- Cross pin shaft for Chrysler 9.25″
- Fits Trac Loc positraction only
- 0.870″ diameter
Yukon Gear – 9.25" Chrysler, Dana 60 Semi-Float X/P Bolt, 80 & Up, 5/16" Head, Tapered Shoulder (Part No.33238)
Driveworks – Tapered Roller Bearing (Part No.S-25520)
Yukon Gear – Rubber Fill Plug For Chrysler (Part No.33463)
Yukon Gear – Bearing Race Driver (Part No.56017)
from
$215.99
Bearing race driver. No return.
Product Features:
See More
Product Features:
- Bearing race driver
- Fits HM89410 race
- All steel construction
Yukon Gear – Dura Grip For Chrysler 9.25" Rear (Part No.26019)
from
$829.99
The Yukon Dura Grip provides aggressive yet smooth traction to give you the confidence & performance you need. Get longer life and better traction with the heavy duty Yukon Dura Grip Positraction. The Yukon Dura Grip uses a nodular case and forged 4320 internals for added strength along with composite clutches for high performance and long life. All units are Rebuildable and many offer upgrades to increase aggressiveness for racing applications. Each unit carries a one year warranty against defects.
Product Features:
See More
Product Features:
- Fits Chrysler 9.25″ rear
- 4-spring, clutch style positraction
- Internal gears are manufactured using forged 4320 steel and cut to provide stronger teeth
- Fully rebuildable
- Assembled in the USA
Popular 1971 Plymouth GTX Drivetrains Categories
1971 Plymouth GTX Drivetrains
You count on your 1971 Plymouth GTX to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 427 Drivetrains ranging in price from $2.29 to $1,487.99, you’re sure to find everything you need for your 1971 Plymouth GTX.
Brands matter. If you want to shop a specific Drivetrains brand, we stock 14 different brands like Valvoline, Driveworks, and National. 1971 Plymouth GTX Drivetrains start as low as $2.29!
One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 7,179 extensive product reviews on 1971 Plymouth GTX Drivetrains. Some of the top-rated Drivetrains products we carry are Multi Purpose Seal with 4.6 stars and Axle Repair Bearing with 3.6 stars.
Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 1971 Plymouth GTX below to get started!
Top-Rated Drivetrains Brands For Your 1971 Plymouth GTX
Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1971 Plymouth GTX running right for years to come. In our inventory you’ll find brands like Valvoline, Driveworks, National, and even more.
Popular Dorman Drivetrains
You’ll find popular Dorman brand products across Differentials. All are waiting to get your 1971 Plymouth GTX back on the road. Some of the top-rated Dorman products in these categories are:
Top-Rated Drivetrains
If are what you’re looking for, our inventory holds plenty. We stock brand Drivetrains for your 1971 Plymouth GTX, and some of our most reviewed parts include:
from
$12.79
(446)
MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Quart
Differential Oil
FAQs for 1971 Plymouth GTX Drivetrains
What are the most purchased Drivetrains for the 1971 Plymouth GTX?
Out of 427 Drivetrains for the 1971 Plymouth GTX, the most popular in our inventory are:
What are the top-rated 1971 Plymouth GTX Drivetrains?
Top-rated Drivetrains for your 1971 Plymouth GTX based on customer reviews/ratings are:
from
$16.49
(19)
Axle Repair Bearing
“Up and running again with no more axle seal leaks in my Grand Marquis with 318k miles on it!”
from
$13.99
(14)
Tapered Cone/Cup Wheel Bearing Set
“Advance Auto website when entering my 1989 Ford F150 doesn’t ask if it is 2 wheel or 4 wheel drive. So I had to return the first set”
