1971 Jeep Wagoneer Performance and Racing Products

Essential 1971 Jeep Wagoneer Performance and Racing Products

Omix – Exhaust Manifold Gasket Set (Part No.17451.03)

Exhaust Manifold Gasket Set

from

$19.49
Are you smelling exhaust in your Jeep? Can you hear an exhaust leak? If so, it’s time to replace the exhaust manifold gasket. Omix-ADA offers high quality exhaust manifold gaskets to solve the problem.

Product Features:
  • Fiber
  • Heat Resistant
  • OE Style
  • Direct Fit
  • Limited 5 Year Warranty
See More

FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1434)

Exhaust Manifold Gasket Set

from

$31.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
  • Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
  • Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
  • Slotted bolt holes allow for easier header installation.
  • Not intended for use in emission controlled vehicles.
See More

Mr. Gasket – Thermocap Radiator Cap (Part No.2470S)

Thermocap Radiator Cap

from

$54.99
Knowing your coolant temperature can help to prevent burn injuries. Thermo Cap, with its built-in calibrated thermometer, indicates the coolant temperature. This is useful information prior to cap removal. Never attempt to remove Thermo Cap when the coolant temperature is very hot. The escaping hot coolant and steam may burn you. Check the Thermo Cap temperature indicator to determine if the coolant is cool enough to make removing Thermo Cap safe. If the coolant is very hot, then thoroughly rinse the radiator with cool water, until the coolant temperature drops into a cooler safe zone Thermo Cap’s integrated coolant reclamation valve works great with your coolant recovery system. Your radiator can reclaim coolant from your overflow bottle. Wide 30 degree to 270 degree Fahrenheit temperature range. Calibrated in centigrade and Fahrenheit. Color-coded temperature ranges. Chromed crown with a colored trim ring. Indicates coolant temperature, Helps to prevent coolant injuries, integrated coolant reclamation valve, Improves under hood appearance, Fits most domestic or import vehicles and various valve pressures available.

Product Features:
  • Indicates coolant temperature
  • Helps to prevent coolant injuries
  • Integrated coolant reclamation valve
  • Improves under hood appearance
  • Fits most domestic vehicles
  • Built in calibrated thermometer
See More

Mr. Gasket – Radiator Cap (Part No.2481)

Radiator Cap

from

$16.99
Cap off your radiator with a gleaming chrome plated filler cap. Made to last.

Product Features:
  • Chrome radiator caps
  • Made to last
  • Skin packaged
See More

K&N – Engine Air Filter: Washable Filter, Increase Horsepower & Acceleration (Part No.33-2018)

Engine Air Filter: Washable Filter, Increase Horsepower & Acceleration

from

$64.99
K&N performance High-Flow Air Filters are engineered to improve engine performance. Unlike disposable paper filters which must be frequently replaced, K&N Air Filters are washable, reusable, and engineered to last for the life of your vehicle. K&N air filters are backed by our famous 10-Year/Million Mile Limited Warranty, and they provide an environmentally friendly way to reduce landfill waste by avoiding disposable filters. Engineered to fit easily into your factory air box, installation can be completed in a matter of minutes! K&N develops and tests each product on the world┐s toughest race tracks, so we can bring the highest level of performance to your daily driving. Join the millions of customers who have saved money and improved vehicle performance by upgrading to K&N filtration.

Product Features:
  • ENGINEERED POWER: State-of-the-art air filter media is designed to increase horsepower and acceleration as well as improve overall engine performance
  • RUGGED CONSTRUCTION: K&N Air Filters are manufactured with durable, premium materials and state-of-the-art construction methods to last a lifetime
  • 4 LAYERS OF PROTECTION: Multiple layers of premium cotton gauze treated with a specially-designed tacking agent work together to create an intricate mesh of engine filter media that is designed to block and trap harmful contaminants
  • CLEAN ONCE EVERY 5 YEARS: Engine air filter only needs cleaning every 75,000 miles under normal highway driving conditions (based on the average miles driven per year of 15,000 miles)
  • ULTIMATE LONGEVITY: No-hassle lifetime warranty on stock replacement K&N air filters- limitations apply
  • EASY INSTALLATION: K&N Air Filters are pre-treated and ready to drop into your factory air box- they are one of the easiest and most cost-effective vehicle upgrades for quick performance gains
  • ECO-FRIENDLY: Using a washable, reusable engine air filter helps reduce replacement air filter waste- a K&N air filter is designed to last longer than 10 or more disposable filters
  • MADE IN USA: K&N Air Filters are proudly made in the USA for trusted quality & reliability
See More

Spectre – Spectre Replacement Air Filter (Part No.HPR3901)

Spectre Replacement Air Filter

from

$49.99
This Spectre OEM replacement air filter is an easy to install performance option for the stock panel shaped air filter in multiple Dodge, Jeep & Mitsubishi applications. With its performance synthetic air filter media, this air filter has been designed to add horsepower and quicker acceleration by allowing more air flow into your engine than ordinary paper filters. This air filter’s sealing edge was engineered to insure a proper air box seal and great engine protection.

Product Features:
  • Replaces the factory air filter
  • Fits perfectly in your stock air box
  • Engineered for increased flow and greater performance
  • Fits select Jeep, Dodge, & Mitsubishi models
  • Factory pre-oiled and ready to use
  • Simple installation
See More

Spectre – Water Neck; Olds (Part No.4733)

Water Neck; Olds

from

$26.99
Spectre’s Oldsmobile V8 water neck fits Oldsmobile 330, 350, 425 and 455 engines. This water neck has been designed around the OEM specifications and has a chrome plated finish for a lasting look that fits great. This water neck has an additional by-pass hose connection and includes the bolts.

Product Features:
  • Fits Oldsmobile 330, 350, 425 and 455 engines
  • Chrome plated
  • Bolts included
  • Designed for OEM fit
  • Easy to install
  • O-ring/gasket not included
See More

FEL-PRO Performance – Engine Cylinder Head Gasket (Part No.1029)

Engine Cylinder Head Gasket

from

$47.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Fel-Pro Performance head gaskets accommodate the high cylinder pressures and cylinder head movement associated with performance engines.
  • Inserted within a stainless steel armor surrounding each cylinder, wire ring design provides highly concentrated sealing around the combustion chamber.
  • Raises combustion sealing force to roughly three times that of standard head gaskets.
  • Copper wire rings to essentially eliminate head brinelling and bending.
  • Not intended for use in emission controlled vehicles.
See More

Edelbrock – Engine Gasket Set (Head / Intake / Exhaust / Valve Cover) for AMC/Jeep (Part No.7372)

Engine Gasket Set (Head / Intake / Exhaust / Valve Cover) for AMC/Jeep

from

$171.99
The Edelbrock #7372?head gaskets provide the best sealing solution and are matched to Edelbrock cylinder heads for optimal performance. Edelbrock relies on industry leading head gasket manufactures to ensure our head gasket sets will provide the best fit

Product Features:
  • Head: 4.275″ Bore/0.045″ Thick/10.60cc Vol.
  • Intake: 1.13″x2.21″ Port/.030″ Thick
  • Exhaust: 1.80″x1.30″ Port
  • 3/16″ Valve Cover
  • Multi Piece Configuration
See More

Omix – Piston Ring Set (Part No.17430.23)

Piston Ring Set

from

$98.99
Are you rebuilding an engine and need a fresh set of piston rings? Omix-ADA offers high-quality replacement piston ring sets from Standard to .080 thousandths over size. They will give you years of service and get you back on the road.

Product Features:
  • .060 Over
  • Engine Work May Be Required To Install This Part
  • Limited 5 Year Warranty
See More

Omix – Exhaust Manifold (Part No.17624.13)

Exhaust Manifold

from

$227.99
Are you smelling exhaust in your Jeep? Can you hear an exhaust leak? If so, you may have a cracked exhaust manifold. Omix-ADA offers high quality exhaust manifolds and gaskets to solve the problem.

Product Features:
  • Left Side
  • OE Style
  • Direct Fit
  • Limited 5 Year Warranty
See More

Omix – Exhaust Manifold (Part No.17624.12)

Exhaust Manifold

from

$264.99
Are you smelling exhaust in your Jeep? Can you hear an exhaust leak? If so, you may have a cracked exhaust manifold. Omix-ADA offers high quality exhaust manifolds and gaskets to solve the problem.

Product Features:
  • Right Side
  • OE Style
  • Direct Fit
  • Limited 5 Year Warranty
See More

Omix – Transmission Shift Knob (Part No.18807.01)

Transmission Shift Knob

from

$11.49
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.

Product Features:
  • Black
  • Plastic
  • OE Style
  • Direct Fit
  • Limited 5 Year Warranty
See More

Omix – Manual Trans Shift Ring Boot (Part No.18881.19)

Manual Trans Shift Ring Boot

from

$20.79
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.

Product Features:
  • Steel
  • Round
  • OE Style
  • Direct Fit
  • Limited 5 Year Warranty
See More

Mallory – Distributor Wiring Harness (Part No.29349)

Distributor Wiring Harness

from

$25.99


Product Features:
  • Service Part
  • Makes Connections Quick And Easy
See More

Mallory – Unilite Breakerless Ignition Conversion Kit (Part No.501)

Unilite Breakerless Ignition Conversion Kit

from

$113.99
Put an end to high maintenance point ignition systems by installing a proven Mallory Unilite ignition conversion kit. Features at a glance, improves performance and fuel efficiency, easy to install with simple hand tools, reduced maintenance and is available for all popular 12-volt negative ground domestic cars and trucks.

Product Features:
  • Easy Installation
  • Improved Fuel Economy
  • Reduced Maintenance
  • Accurate Timing
  • Improved Performance
  • Provides A Simple Conversion
  • No Moving Parts To Wear Out
See More

Omix – Tie Rod End Tube (Part No.18046.03)

Tie Rod End Tube

from

$26.49
Is your Jeep’s steering loose? Are your tires wearing in an uneven pattern? Chances are that some of your steering components are worn. Fixing them is cheaper than replacing your tires and it’s a whole lot safer too. Omix-ADA offers high quality replaceme

Product Features:
  • Steel
  • OE Style
  • Direct Fit
  • Limited 5 Year Warranty
See More

Omix – Driveshaft U-Joint (Part No.16585.02)

Driveshaft U-Joint

from

$38.49
Are your U-joints making noise? Or has one broken? When they do break, they usually damage the axle shafts or driveshafts too. That’s a lot of unnecessary work and expense. U-joint replacement is a routine maintenance chore. Omix-ADA offers high quality r

Product Features:
  • Front/Rear
  • OE Style
  • Direct Fit
  • Limited 5 Year Warranty
See More

Rugged Ridge – Skid Plate (Part No.DMC-16597.35)

Skid Plate

from

$193.99
Protect your factory differential cover with these heavy-duty skid plates. Designed to fit the contours of your stock differential cover with the distinctive Jeep logo etched into the steel, these heavy duty skids look great while providing extra protecti

Product Features:
  • Black Powder Coated
  • 3/16 in. Steel
  • Use w/ Factory Diff Cover
  • Mounting Hardware Included
  • Jeep Logo
See More

Rugged Ridge – Skid Plate (Part No.DMC-16597.44)

Skid Plate

from

$184.99
Protect your factory differential cover with These heavy-duty skid plates. Designed to fit the contours of your stock differential cover. Constructed of durable 3/16 Inch black powder coated steel, these skid plates will help you slide over obstacles and

Product Features:
  • Black Powder Coated
  • 3/16 in. Steel
  • Use w/ Factory Diff Cover
  • Mounting Hardware Included
  • Jeep Logo
See More

Rugged Ridge – Heavy Duty Differential Skid Plate (Part No.16597.30)

Heavy Duty Differential Skid Plate

from

$123.99
Protect your factory differential cover with These heavy-duty skid plates. Designed to fit the contours of your stock differential cover. Constructed of durable 3/16 Inch black powder coated steel, these skid plates will help you slide over obstacles and

Product Features:
  • Cast Steel
  • Black Finish
See More

Rugged Ridge – Heavy Duty Differential Skid Plate (Part No.16597.35)

Heavy Duty Differential Skid Plate

from

$114.99
Protect your factory differential cover with these heavy duty skid plates. Designed to fit the contours of your stock differential cover and made of durable 3/16-inch black powdercoated steel, these skid plates will help you slide over obstacles and no ge

Product Features:
  • Black Powder Coated
  • 3/16 in. Steel
  • Use w/ Factory Diff Cover
  • Mounting Hardware Included
  • Limited 5 Year Warranty
See More

Omix – Timing Chain (Part No.17453.02)

Timing Chain

from

$20.99
Timing chains stretch over time. If left untouched, they can begin jumping teeth on the camshaft and crankshaft sprockets. This will change your timing and will do major damage to your Jeep’s engine. It is recommended that you change the timing chain and

Product Features:
  • OE Style
  • Direct Fit
  • Limited 5 Year Warranty
See More

Omix – Timing Kit (Part No.17452.06)

Timing Kit

from

$88.99
Timing chains stretch over time. If left untouched, they can begin jumping teeth on the camshaft and crankshaft sprockets. This will change your timing and will do major damage to your Jeep’s engine. It is recommended that you change the timing chain and

Product Features:
  • 3 Piece Kit
  • OE Style
  • Direct Fit
  • Limited 5 Year Warranty
See More

Omix – Timing Chain (Part No.17453.09)

Timing Chain

from

$53.99
Timing chains stretch over time. If left untouched, they can begin jumping teeth on the camshaft and crankshaft sprockets. This will change your timing and will do major damage to your Jeep’s engine. It is recommended that you change the timing chain and

Product Features:
  • OE Style
  • Direct Fit
  • Limited 5 Year Warranty
See More

Omix – Timing Chain (Part No.17453.07)

Timing Chain

from

$109.99
Timing chains stretch over time. If left untouched, they can begin jumping teeth on the camshaft and crankshaft sprockets. This will change your timing and will do major damage to your Jeep’s engine. It is recommended that you change the timing chain and

Product Features:
  • OE Style
  • Direct Fit
  • Limited 5 Year Warranty
See More

1971 Jeep Wagoneer Performance and Racing Products

You count on your 1971 Jeep Wagoneer to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Performance and Racing Products. With 19 Performance and Racing Products ranging in price from $18.99 to $264.99, you’re sure to find everything you need for your 1971 Jeep Wagoneer.

Brands matter. If you want to shop a specific Performance and Racing Products brand, we stock 8 different brands like Mr. Gasket, Spectre, and K&N. 1971 Jeep Wagoneer Performance and Racing Products start as low as $18.99!

One of the best ways to find top quality OEM or aftermarket Performance and Racing Products is by asking professionals. Short of that, you can shop with confidence thanks to our 25 extensive product reviews on 1971 Jeep Wagoneer Performance and Racing Products. Some of the top-rated Performance and Racing Products products we carry are Skid Plate with 2.6 stars.

Did we mention you can order your Performance and Racing Products from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Performance and Racing Products inventory for your 1971 Jeep Wagoneer below to get started!

Top-Rated Performance and Racing Products Brands For Your 1971 Jeep Wagoneer

Trusted Performance and Racing Products OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1971 Jeep Wagoneer running right for years to come. In our inventory you’ll find brands like Mr. Gasket, Spectre, K&N, and even more.

Popular K&N Performance and Racing Products

You’ll find popular K&N brand products across Performance Air Filters. All are waiting to get your 1971 Jeep Wagoneer back on the road. Some of the top-rated K&N products in these categories are:

FAQs for 1971 Jeep Wagoneer Performance and Racing Products

What are the most purchased Performance and Racing Products for the 1971 Jeep Wagoneer?

Out of 19 Performance and Racing Products for the 1971 Jeep Wagoneer, the most popular in our inventory are:
Thermocap Radiator Cap
from $54.99
This product is not rated
Thermocap Radiator Cap
Performance Radiator Caps
Water Neck; Olds
from $26.99
This product is not rated
Water Neck; Olds
Performance Water Outlets
Driveshaft U-Joint
from $38.49
This product is not rated
Driveshaft U-Joint
Performance Universal Joints

What are the top-rated 1971 Jeep Wagoneer Performance and Racing Products?

Top-rated Performance and Racing Products for your 1971 Jeep Wagoneer based on customer reviews/ratings are:
Skid Plate
from $184.99
(5)
Skid Plate
“The part was perfect, the car runs better and drive smoother than before, highly recommend Advance Auto Parts”