1971 Jeep Wagoneer Ignition Wires

These ACCEL wire sets are a true performance upgrade replacement for OE types. Efficient delivery of spark energy for a good price. Silicone boots with black wire contain zinc-plated steel terminals. Noise suppression core. Set contains 8 plug wires with coil lead.

Product Features:

• 7mm And 8mm High Gloss Silicone Jacket
• 450° F Rated Silicone Jacket
• Stainless Steel Plug Terminals
• RFI Suppression For Street Driven Applications
• Custom-fit Universal And Import Coverage
• High-strength Fiberglass Braid Construction

The traditional ACCEL combination of yellow wire and red spark plug boots has been added to these SuperStock Spiral Core 5000 Series wire sets, which feature color-matched wire and spark plug boots in blue, black, and red. With only 500 ohms/ft. of resistance, more ignition energy can reach the spark plug, producing a longer-lasting, hotter spark flame kernel. The results is higher performance through improved efficiency, quicker throttle response, and reduced emissions. This 8mm wire’s double silicone construction is rated to 550 degrees F. The high-gloss wire jacket resists moisture, chemicals, and heat extremes for longer life and great looks. The fiberglass braid adds greater pull strength and terminal retention, while the stainless steel spark plug terminals provide excellent long life, electrical conductivity, and corrosion resistance. Both universal and custom-fit applications are available for early and late model cars and trucks.

Product Features:

• 500 Ohms/ft Of Resistance
• 550 F Rated Silicone Jacket
• Stainless Steel Plug Terminals
• High RFI Suppression For Street And Strip Use
• Universal And Import Coverage
• High-strength Fiberglass Braid Construction
• Pre And Post HEI Vehicles
• 8mm High Gloss Silicone Jacket

These ACCEL Super Stock wire sets are a true performance upgrade replacement for OE types. Efficient delivery of spark energy for a good price. Silicone boots with zinc-plated steel terminals.

Product Features:

• Tinned copper core allows virtually no resistance
• Great for points and magneto
• 450 Degree Wire Temperature Rating
• Meets Or Exceeds OE Boot Temperature Rating

ACCEL’s SuperStock 4000 series spark plug wire sets are designed to upgrade an OE ignition system for high-spark delivery levels for street driven applications. The 450 degree F rated silicone jacket is extruded over a tightly woven, rugged fiberglass braid. The braid is applied over high dielectric strength EPDM (Ethylene Propylene Diene Monomer) inner insulation for ignition wire performance that exceeds SAE specifications.

Product Features:

• 7mm Yellow Silicone Jacket
• Street-driven Applications
• Copper Core
• Orange Spark Plug Boots
• Pre HEI Vehicles
• Universal Wire Set

Most modern electronic ignition systems require suppression style wires to preserve sensitive components. Flame-Thrower 8mm Custom fit MAGx2 wires provide enhanced RFI suppression and dual current paths for more power delivered to the spark plug. Our custom wire sets have factory terminated ends for a superior connection and perfect fit, without cutting, crimping and splicing.

Product Features:

• Two current paths for reliability and redundancy. -Primary path: Spiral wound stainless steel alloy.-Secondary path: Carbon impregnated fiberglass center core.
• Low 500 ohm per foot resistance.
• 8mm Silicone jacket to resist high temperatures, moisture, oil and chemicals.
• EPDM (Ethylene Propylene Diene Methylene) inner insulation for superior heat resistance and prevention of arcing and voltage leaks.
• Fiberglass reinforcing braid for added strength and flexibility.

ACCEL now offers the cure for burnt spark plug wire boots with Extreme 9000 Ceramic Wire kits. The 8mm Ferro-Spiral core wire now has ceramic boots on the spark plug end of the wires. The ceramic boots will withstand up to 2,000 degrees F. If you are running headers with close tolerances, have an engine bay with little room or an RV with boots that melt because of heat, these wire kits are the answer for burnt and melting boots. The wire uses a 500 Ohms/ft Ferro-Spiral core developed for performance use. It provides excellent energy delivery to the spark plugs, while providing the highest level of RFI/EMI suppression. The Extreme 9000 Ceramic Wires also feature stainless steel spark plug terminals for maximum spark energy to the plugs.

Product Features:

• Stainless Steel Plug Terminals
• Universal and custom fit applications
• Pre And Post HEI Vehicles
• Ceramic boots withstand up to 2,000░ Fahrenheit
• Ceramic boots withstand up to 2,000° Fahrenheit
• 8mm double silicone construction black wire rated at 600░ F rated
• 8mm double silicone construction black wire rated at 600° F rated
• 500 Ohms/foot ferro sprial core offers the highest level of RFI/EMI suppression

Features at a glance, low 300 Ohm resistance spiral core delivers high energy output for maximum spark at the plug. Great RFI suppression meets the demands of today’s on-board electronics, such as electronic ignition, sound systems, and computer controls. 8MM ozone-resistant red silicone jacket repels water, oil, grease, and fuel, and withstands temperatures up to 500 degrees. Fits V8, universal wire kit: includes 45 degree spark plug boots, female socket (standard) distributor boots and terminals.

Product Features:

• Most Advanced Wire By Mallory
• RFI Suppression
• High Temperature Silicone Jacket
• Withstands Over 500+F
• Come In Ready To Use Kits
• Extra Long Kits

Features at a glance, low 300 Ohm resistance spiral core delivers high energy output for maximum spark at the plug. Great RFI suppression meets the demands of today’s on-board electronics, such as electronic ignition, sound systems, and computer controls. 8MM ozone-resistant red silicone jacket repels water, oil, grease, and fuel, and withstands temperatures up to 500 degrees. Fits V8, universal wire kit: includes 45 degree spark plug boots, female socket (standard) distributor boots and terminals.

Product Features:

• Most Advanced Wire By Mallory
• RFI Suppression
• High Temperature Silicone Jacket
• Withstands Over 500+F
• Come In Ready To Use Kits
• Extra Long Kits

ACCEL’s SuperStock 4000 series spark plug wire sets are designed to upgrade an OE ignition system for high-spark delivery levels for street driven applications. The 450 degree F rated silicone jacket is extruded over a tightly woven, rugged fiberglass braid. The braid is applied over high dielectric strength EPDM (Ethylene Propylene Diene Monomer) inner insulation for ignition wire performance that exceeds SAE specifications.

Product Features:

• 7mm And 8mm High Gloss Silicone Jacket
• 450 F Rated Silicone Jacket
• Stainless Steel Plug Terminals
• RFI Suppression For Street Driven Applications
• Custom-fit Universal And Import Coverage
• High-strength Fiberglass Braid Construction
• Pre And Post HEI Vehicles

Most modern electronic ignition systems require suppression style wires to preserve sensitive components. Flame-Thrower 8mm Custom fit MAGx2 wires provide enhanced RFI suppression and dual current paths for more power delivered to the spark plug. Our custom wire sets have factory terminated ends for a superior connection and perfect fit, without cutting, crimping and splicing.

Product Features:

• Two current paths for reliability and redundancy. -Primary path: Spiral wound stainless steel alloy.-Secondary path: Carbon impregnated fiberglass center core.
• Low 500 ohm per foot resistance.
• 8mm Silicone jacket to resist high temperatures, moisture, oil and chemicals.
• EPDM (Ethylene Propylene Diene Methylene) inner insulation for superior heat resistance and prevention of arcing and voltage leaks.
• Fiberglass reinforcing braid for added strength and flexibility.

The MSD 8.5mm super conductor wire is the performance wire. Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference. In a single 12 inch length of super conductor wire there is only 40 – 50 ohms of resistance. That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it’s great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective electro magnetic interference (EMI) or choke. This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. Available in universal kits and bulk lengths.

Product Features:

• Bolt-on Performance
• Custom Fit For Make And Model Listed
• Wires Are Pre-Cut To Exact Specifications
• Conductor core features DuPont Kevlar material for increased tensile strength
• Durable outer sleeve is a proprietary compound for resistance to high heat or abrasion
• Stainless steel terminals feature dual crimp tabs to grip wire conductor and outer jacket separately