1971 Jeep Wagoneer Steering and Chassis Parts

Below you will find various in-demand Jeep Steering and Chassis Parts, components and accessories for your 1971 Wagoneer. Advance Auto Parts has popular Wagoneer parts like Tie Rods, Gear Boxes, Power Steering Parts and more. You’ll also find aftermarket and OEM Steering and Chassis Parts for other Wagoneer model years including 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 2023 and more. Select a category of 1971 Jeep Wagoneer Steering and Chassis Parts below and start saving instantly.

Please Select your Vehicle to See Exact Fit Parts

Popular 1971 Jeep Wagoneer Steering and Chassis Parts Categories

Power Steering Coolers

Steering Gear Box

Suspension Ball Joint Kits

Steering Drag Link Adjusting Sleeves

Knuckle Bearings

Steering Stabilizers

Power Steering Filters

Steering Coupling Assemblies

Tie Rod End Sleeves

Power Steering Pressure Hoses

Power Steering Pump Kits

Tie Rod End Boots

Power Steering Return Hoses

Pitman Shaft Seal Kits

Steering Gear Input Shaft Seals

Steering Gear Box Seals

Power Steering Reservoir Hoses

Power Steering Pump Hose Fittings

Worm Shaft Seals

Essential Steering and Chassis Parts for 1971 Jeep Wagoneers

from

$52.99

New Rag Joint steering couplers are carefully engineered to OE specifications. All units are complete with lower casting, rubber disk and mounting bolts already assembled for easy, trouble free installation. All units are carefully packaged to insure safe arrival at your door

from

$13.49

Premium-quality parts for lasting repairs. Engineered to OE design and specifications.

from

$17.99

OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.

from

$76.99

Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.

from

$30.99

Premium-quality parts for lasting repairs. Engineered to OE design and specifications.

from

$4.99

Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Product Features:

Manufactured From High Quality Material
Engineered To The Specifications
Meets The Quality Standards
Designed For Performance And Durability
Easy To Install

from

$53.99

from

$90.99

from

$4.99

Manufactured From High Quality Material
Engineered To The Specifications
Meets The Quality Standards
Designed For Performance And Durability
Easy To Install

from

$28.49

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Power steering oil cooler
Size: 3/4″ x 2-1/2″ x 9″
For vehicles with 3/8″ I.D. power steering return hose
Removes destructive heat and prolongs power steering system life
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$34.49

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

Coated for corrosion resistance
Alloy steel construction provides durability
Includes any necessary hardware

from

$87.99

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:

Complete with clamps
Used to set Toe in or out
replaces rusted or corroded sleeves
Used to connect inner and outer tie rod ends

from

$26.49

Manufactured with premium-grade steel, National taper bearing cones feature crowned raceways and rollers to ensure even load distribution.

Product Features:

PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION – Crowned raceways and rollers for even load distribution
OE-STYLE DESIGN – Engineered to meet OE specifications
COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$11.99

Manufactured with premium-grade steel, National taper bearing cups feature crowned raceways to ensure even load distribution.

Product Features:

PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION – Crowned raceways for even load distribution
OE-STYLE DESIGN – Engineered to meet OE specifications
COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$1095.00

Product Features:

All critical components are built to strict manufacturing specifications, which eliminates critical component failure that causes noise and leaks
Exterior surfaces are finished with corrosion and rust resistant coatings to ensure an extended service life
All components are 100% new and functionally tested to meet or exceed OE specifications for extended reliability
Recirculating balls are machined for smooth operation which guarantees correct steering feel and performance

from

$611.99

New Power Steering Gears are engineered to OE specifications. Each unit is inspected, adjusted and hydraulically tested. All units are carefully packaged to insure safe arrival at your door.

from

$157.99

Ball Joint kit for Dana 30, Dana 44 & GM 8.5″, not Dodge, one side. This replaces Spicer part number 706116X.

Product Features:

Ball joint kit for Dana Spicer 30 and 44
Complete kit for upper and lower
Services one side
Replaces Spicer part number 706116X

from

$78.99

Backed by superior materials and rigorous testing, MOOG ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

PROBLEM SOLVER GUSHER BEARING: Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
STRONG AND DURABLE: Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
GREASEABLE SOCKET: Reduces corrosion and wear by allowing new lubricant to flush contaminants
ABSORBS IMPACT: Belleville preload washer helps keep the bearing package tight as bearings wear
EASY TO INSTALL: Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
COMPREHENSIVE COVERAGE: Available for foreign and domestic nameplates

from

$34.99

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Power Steering Kit
Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
Good low temperature capability
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$25.49

Premium-quality parts for lasting repairs. Engineered to OE design and specifications.

from

$33.99

Driveworks Brand tie rod adjusting sleeves are high-quality, cost-effective parts. Replace tie rod adjusting sleeve to help eliminate front-end vibration, shimmy and unsafe handling. Driveworks Brand chassis parts promote improved steering response.

Product Features:

Meets or exceeds OE performance specifications
Performance tested to ensure durability
Forged micro-alloy steel construction for strength and durability

from

$27.99

Carquest Premium tie rods are engineered and benchmarked to original equipment (O.E.) performance standards. Consistent manufacturing and rigorous quality testing ensure a trouble-free installation and long service life. Carquest Premium tie rods utilize the same joint technology as the OE part, with either a sealed (maintenance-free) design or a metal-on-metal (greaseable) design. We feature a corrosion-resistant coating on all tie rods to reduce rust. Each part number in the Carquest Premium tie rod line is designed and built to deliver the quality that you demand.

Product Features:

Engineered for OE fit, form and function
Corrosion-resistant coating to reduce rust and extend service life
Hex formed studs and/or wrench flats for easier installation (where applicable)
Joint technology matches the original part with either sealed (maintenance-free) or metal-on-metal (greaseable) designs
Sealed designs feature a fully polished ball stud combined with synthetic bearing technology for smooth operation, improved reliability and no maintenance
Inner tie rod ends are supplied with thread locking compound
Hardware included for easier installation (where applicable)

from

$50.99

CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:

In-line filter with serviceable filter element
Patented built-in bypass that filters up to 190 micron particles
Designed to extend the life of the steering system
Sure-grip barb connections are included to ensure proper hose fitment

from

$91.99

Durable power steering filter designed to remove harmful particles and contaminates form fluid to prevent premature steering system failure.

Product Features:

Contains a powerful magnet which removes 99% of contaminants at filter entry point
Supplied with a built-in fluid safety bypass to ensures power steering continues to operate in event of filter overload
Contains a secondary membrane filter to captures metal materials that may contaminate the power steering system
Compact design available in standard sizes 3/8¿ and 1/2¿ to allow for installation into small areas at various angles, fitting all makes and models
Compact design available in standard sizes 3/8┐ and 1/2┐ to allow for installation into small areas at various angles, fitting all makes and models
Leak free, high impact, environmentally resistant polymer casing to ensure longer life and better resistance to high underhood temperatures

from

$6.29

Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.

Product Features:

Easy to Install
Superior Material
Saves Your Tie Rods
Lasts Longer
Looks Great

from

$17.49

This set of black polyurethane tie rod end dust boots from Prothane are long lasting and offer a direct fit. No drilling or modification required.

Product Features:

Black Polyurethane
Direct Fit
OE Style
Long-lasting

from

$90.99

Skyjacker(R) steering stabilizer, A steering stabilizer is a dampening shock for your steering system. It dampens out the harshness of the highway, the shimmy from running the additional weight of larger tires and wheels and places control back into the driver hands. Stabilizers also reduce the fatigue of the driver on a personal level by reducing the amount of physical strength it takes to guide those larger tires on and off the road. Changing the weak stock unit for a better performing replacement or adding dual steering stabilizers is an inexpensive but worthy investment

Product Features:

Skyjacker(R) Steering Stabilizer Is A Dampening Shock For Your Steering System
Stabilizer Dampens Out The Harshness Of The Highway, The Shimmy From Running The Additional Weight Of Larger Tires And Wheels And Places Control Back Into The Driver Hands
Stabilizers Also Reduce The Fatigue Of The Driver On A Personal Level By Reducing The Amount Of Physical Strength It Takes To Guide Those Larger Tires On And Off The Road
Changing The Weak Stock Unit For A Better Performing Replacement Or Adding Dual Steering Stabilizers Is An Inexpensive But Worthy Investment
Reduce Physical Strength Handling Larger Tires

from

$60.99

Designed for trucks, vans, and SUVs, and CUVs, the Monroe Magnum steering stabilizer helps reduce vibrations that travel through the steering system before they get to the driver, improving control and driver fatigue in all driving conditions.

Product Features:

REDUCES VIBRATION – Ideal for trucks, vans, SUVs, and CUVs, it helps reduce vibrations that travel through the steering system before they get to the driver to improve control and cut down on driver fatigue in all driving conditions
CONSISTENT PERFORMANCE – All-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
STRONG AND DURABLE – Sintered iron piston and .50-in. nitrocarburized piston rod for enhanced durability and long service life
EXCEPTIONAL HANDLING – Full displaced valving delivers better valving range on both compression and extension cycles for consistent performance
LONGER SERVICE LIFE – Self-lubricating fluid seal retains gas without excessive wear or friction
MOUNTS HORIZONATALLY – Micro-cellular gas design allows the unit to be mounted horizontally without impacting performance for improved steering control

Upgrade your 1971 Jeep Wagoneer with Top-Quality Steering and Chassis Parts

When it comes to maintaining or upgrading your 1971 Jeep Wagoneer, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Jeep or enhancing its overall performance, Steering and Chassis Parts are key to keeping your Wagoneer functioning at its best. At Advance Auto Parts, we offer a wide selection of 45 Steering and Chassis Parts for the 1971 Jeep Wagoneer, designed to meet your needs without breaking the bank. From Tie Rod replacements to Gear Boxes upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Steering and Chassis Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Steering and Chassis Parts for your 1971 Jeep Wagoneer at great prices. Our Steering and Chassis Parts inventory for this model ranges from just $3.29 to $868.99, with an average price of $170.48. Our 45 Steering and Chassis Parts in stock come from 14 trusted brands, so you’re sure to find the right part for your 1971 Jeep Wagoneer without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1971 Jeep Wagoneer, we stock popular OEM and aftermarket Steering and Chassis Parts from top names like Moog, Carquest Premium, National, and more. Moog Steering and Chassis Parts start at just $37.99 and boast an impressive 4.5 stars average rating from customers. Carquest Premium and National also bring quality to the table, with Steering and Chassis Parts available starting at $16.49, and at an average 4.4 stars rating. With 1,398 customer reviews and counting, our 1971 Jeep Wagoneer Steering and Chassis Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Steering and Chassis Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1971 Jeep Wagoneer is always ready to roll. We’re committed to providing you with everything you need to keep your Wagoneer in top shape, all in one place. Start shopping confidently below for your 1971 Jeep Wagoneer!

Best-Selling Tie Rods for 1971 Jeep Wagoneers

Enhance the driving experience in your Jeep with 3 quality Tie Rod components, starting at $17.49.

show more show less

from

$18.99

Meets or exceeds OE performance specifications
Performance tested to ensure durability
Forged micro-alloy steel construction for strength and durability

from

$27.99

Engineered for OE fit, form and function
Corrosion-resistant coating to reduce rust and extend service life
Hex formed studs and/or wrench flats for easier installation (where applicable)
Joint technology matches the original part with either sealed (maintenance-free) or metal-on-metal (greaseable) designs
Sealed designs feature a fully polished ball stud combined with synthetic bearing technology for smooth operation, improved reliability and no maintenance
Inner tie rod ends are supplied with thread locking compound
Hardware included for easier installation (where applicable)

from

$17.49

This set of black polyurethane tie rod end dust boots from Prothane are long lasting and offer a direct fit. No drilling or modification required.

Product Features:

Black Polyurethane
Direct Fit
OE Style
Long-lasting

Most Popular 1971 Jeep Wagoneer Gear Boxes

Customize your Jeep with 15 Gear Boxes products like Steering Gear Box, Steering Stabilizers, and Steering Gear Box Seals, all priced under $868.99.

show more show less

from

$201.99

The steering gear box is the heart of the vehicle’s steering system. It guides the wheels’ movement in conjunction with the direction that the steering wheel is rotated, helping achieve ideal steering response for more efficient driving. CARDONE Remanufactured Steering Gear Boxes are re-engineered, built and tested to match O.E. performance. E ach unit features 100 percent new O-rings and lip seals to ensure leak-free, long-lasting performance. Shafts are surfaced to precise specifications to eliminate premature seal wear and extend gear life. All units are 100 percent hydraulically tested to ensure perfect fit and function.

Product Features:

100 percent hydraulic testing measures for proper flow, leakage and performance to ensure perfect fit and function.
100 percent new O-rings and lip seals ensure leak-free, long-lasting performance.
All critical components are tested to ensure product reliability.
Shafts are surfaced to precise specifications to eliminate premature seal wear and extend gear life.
Rust inhibitive “Cool Dip” finish is a penetrating dye that completely covers all exposed surfaces for a consistent, protective finish that will not crack, flake or peel.
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80 percent.

from

$271.99

Manual Steering Gears are thoroughly cleaned and exterior surfaces reconditioned for like-new look. Each component is carefully inspected and replaced if not to OE tolerances. All seals and O-rings are replaced with OE equivalent parts. Each unit is filled with a high quality grease with a special polymer to reduce oil separation. Each unit is tested to insure OE performance. Painted with a high quality paint. All units are carefully packaged to insure safe arrival at your door. Remanufactured in the USA.

from

$65.99

Premium-quality parts for lasting repairs. Engineered to OE design and specifications.

from

$619.99

New Power Steering Gears are engineered to OE specifications. Each unit is inspected, adjusted and hydraulically tested. All units are carefully packaged to insure safe arrival at your door.

from

$179.99

Restores steering and handling

from

$494.99

Power Steering Gears are thoroughly cleaned and exterior surfaces reconditioned for like-new look. Each component is carefully inspected and replaced if not to OE tolerances. All seals and O-rings are replaced with OE equivalent parts. Each unit is tested to insure OE performance. Painted with a high quality paint. All units are carefully packaged to insure safe arrival at your door. Remanufactured in the USA.

from

$868.99

Direct Fit – to make installation easy; All units are USA Engineering Approved; PWR Pumps, Racks, Gears & Reservoirs are 100% tested for leaks, pressure, noise and function

Product Features:

PWR Power Steering Gear Boxes are 100% NEW and Engineered In North America
All PWR products are Designed, Tier-Manufactured, and Multi-Tested to meet or exceed OE Performance and Durability Requirements
PWR does not consolidate turn ratios, ensuring OE quality replacement performance
Includes: NEW housings, internal components, ball bearings, shafts, bushings, and are precision machined and matched for optimum performance and duarability
Features our EXCLUSIVE INDUSTRIAL GRADE PACKAGING, Input and Output Shaft Spilne Protectors, Sealed Heavy Duty Plastic Enclosures, and Fluid Port Caps
Supplied with a New Output Shaft Nut and all required Installation Seals and Washers

from

$746.99

Edelmann Elite power steering gears represent a step up in quality and performance over typical aftermarket brand power steering gears and are built to meet or exceed OE specifications for form, fit, and function. Designed and built with 100% new components and up-to-date designs provide for a better replacement part. Each gear is painstakingly engineered to not only eliminate commonly experienced failures caused by the OE design, but also incorporates the latest OE revisions and enhancements. Every gear has a unique Designated Numeric Asset identification number etched into the part, which verifies its authenticity and corresponds to an individualized test inspection report that is included with the product to confirm its level of quality.

Product Features:

Every component is 100% completely new, never reused
Each part’s unique DNA number and testing report provides confidence that the quality of your purchase is a verified fact, not just a concept
Re-engineered designs fix traditional OE flaws and prevent premature, repeated failures. This commitment to “working out the bugs” in OE design will allow you to leave the risk of remanufactured units behind
Includes necessary hardware where applicable (o-ring, washers, etc…)
U.S. based A.S.E. Certified Technical Support stands ready to provide you with assistance

from

$623.99

PS GEAR-NEW

from

$553.99

PS GEAR BOX-RMFD

from

$495.99

Manufactured From High Quality Material
Engineered To The Specifications
Meets The Quality Standards
Designed For Performance And Durability
Easy To Install

from

$452.99

MAN STG GEAR BX-NEW

from

$356.99

from

$299.99

MAN STG GEAR BX-NEW

from

$4.99

Manufactured From High Quality Material
Engineered To The Specifications
Meets The Quality Standards
Designed For Performance And Durability
Easy To Install

Top Picks for 1971 Jeep Wagoneer Power Steering Parts

Upgrade Jeep Wagoneers with top-quality Power Steering Parts parts, including 16 OEM and aftermarket selections for your 1971 model.

show more show less

from

$50.99

In-line filter with serviceable filter element
Patented built-in bypass that filters up to 190 micron particles
Designed to extend the life of the steering system
Sure-grip barb connections are included to ensure proper hose fitment

from

$47.49

In-line filter with serviceable filter element
Patented built-in bypass that filters up to 190 micron particles
Designed to extend the life of the steering system
Sure-grip barb connections are included to ensure proper hose fitment

from

$16.49

OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.

from

$46.99

from

$32.99

In-line filter with serviceable filter element.
Patented built-in bypass that filters up to 190 micron particles.
Designed to extend the life of the steering system.
Sure-grip barb connections are included to ensure proper hose fitment.

from

$28.49

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Power steering oil cooler
Size: 3/4″ x 2-1/2″ x 9″
For vehicles with 3/8″ I.D. power steering return hose
Removes destructive heat and prolongs power steering system life
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$7.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Quick Connect coupler
Fits most 5/16″ transmission lines with 1/2″ – 20″ threads
Simplifies transmission cooler installation
Allows for auxiliary transmission cooler installation without cutting OE lines
Quik-Connect Coupler – Fits most 5/16″ trans-lines with 1/2″-20 thread
Compatible with OEM cooler systems
Made of brass
Quality construction

from

$35.99

from

$8.79

from

$3.29

from

$35.49

In-line filter with serviceable filter element
Patented built-in bypass that filters up to 190 micron particles
Designed to extend the life of the steering system
Sure-grip barb connections are included to ensure proper hose fitment

from

$79.99

from

$52.99

from

$34.99

Product Features:

Interchangeable end sizes allow the filter to fit virtually any hose size and vehicle
Small size provides an easy fit, even in cramped systems
Dual filtration technology eliminates metal and non-metal debris, ensuring a cleaner system
Filter can be easily serviced, extending its functional lifespan considerably

from

$59.99

from

$20.99

Premium-quality parts for lasting repairs. Engineered to OE design and specifications.

In-Demand Steering Hardware for 1971 Jeep Wagoneers

Select from 2 premium Steering Hardware parts for your 1971 Jeep Wagoneer, with prices ranging from $37.99 to $52.99.

show more show less

from

$37.99

Coated for corrosion resistance
Engineered to meet or exceed OE Performance
Wrench flats on housing and stud provide easy installation and alignment adjustment.
Polished Stud ball provides low socket torque.
Stud design is optimized to provide ideal stud swing and strength for each application.

from

$52.99

Most Sold 1971 Jeep Wagoneer Ball Joints

Explore our best-selling Jeep parts for the 1971 Wagoneer among 1 OEM and aftermarket options starting from $157.99.

show more show less

from

$157.99

Ball Joint kit for Dana 30, Dana 44 & GM 8.5″, not Dodge, one side. This replaces Spicer part number 706116X.

Product Features:

Ball joint kit for Dana Spicer 30 and 44
Complete kit for upper and lower
Services one side
Replaces Spicer part number 706116X

Top-Rated Steering and Chassis Parts Brands For Your 1971 Jeep Wagoneer

Shop for the best-rated brands offering Steering and Chassis Parts and other products for your 1971 Jeep Wagoneers. Below you’ll find some of our best rated Steering and Chassis Parts from Moog, Carquest Premium, and National, and more. Steering and Chassis Parts from these brands that fit a 1971 Wagoneer start at just $16.49 and are rated as high as 4.5 stars. OEM and aftermarket Steering and Chassis Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular Moog 1971 Jeep Wagoneer Steering and Chassis Parts

When it comes to maintaining or upgrading your 1971 Jeep Wagoneer, using quality Steering and Chassis Parts is essential to ensure durability and a perfect fit. Moog ticks all of those boxes. We offer a wide selection of Moog Steering and Chassis Parts, specifically designed for the 1971 Jeep Wagoneer. With over 1 Moog brand Steering and Chassis Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $37.99. Plus, with over 10 customer reviews and an average rating of 4.5 stars, you can trust that our Moog Steering and Chassis Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $37.99

(10)

Steering Tie Rod End Adjusting Sleeve

“Good”

Popular Carquest Premium 1971 Jeep Wagoneer Steering and Chassis Parts

Carquest Premium auto parts is one of the highest quality Steering and Chassis Part brands in the market. Any 1971 Jeep Wagoneer owner should feel confident when installing genuine Carquest Premium parts in their vehicle. To ensure the best fit and performance for your 1971 Wagoneer, Advance Auto Parts carries a full inventory of 2 Carquest Premium Steering and Chassis Parts. Plus you will be keeping your Jeep in peak condition while saving money because prices on these Carquest Premium Steering and Chassis Parts range from $16.49 to $46.99, plus, with more than 18 customer reviews and an impressive 4.4 stars average rating, you can be confident the Fram Steering and Chassis Parts below will deliver on both quality and value.

from $16.49

(1)

Power Steering Repair Fittings, 3/8" Male Inv. Flare x 3/8" Beaded Tube

“works good”

from $46.99

(17)

3/8" I.D. Return Hose J189

“There is plenty of hose to get the job done”

FAQs for 1971 Jeep Wagoneer Steering and Chassis Parts

Which Steering and Chassis Parts are best-sellers for 1971 Jeep Wagoneers?

Out of 45 Steering and Chassis Parts that fit 1971 Jeep Wagoneers, the following parts are the top sellers:

3/8" ID Return Hose (J189) (Sold by foot) (5190122) – $8.79
New Power Steering Filter (10417593) – $32.99
Steering Tie Rod End Adjusting Sleeve (15510347) – $18.99

What’s the price range for 1971 Jeep Wagoneer Steering and Chassis Parts?

Steering and Chassis Part prices for the 1971 Jeep Wagoneer start at $3.29 and go up to $868.99 for the most premium parts.

What’s the average price of a Steering and Chassis Part for a 1971 Jeep Wagoneer?

The average price for Steering and Chassis Parts for the 1971 Jeep Wagoneer is $170.48. Keep in mind the variety of part types within our Steering and Chassis Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Steering and Chassis Parts for other Jeep Wagoneer model years?

Yes, we currently carry Steering and Chassis Parts for 29 model years of Jeep Wagoneers between 1963 and 2025. Steering and Chassis Parts are bought most frequently for the following model years: 2023, 1990, 1989, 1988, 1987, 1986, 1985, 1984, and 1983.

What are the cheapest Steering and Chassis Parts for my 1971 Jeep Wagoneer?

The cheapest 1971 Jeep Wagoneer Steering and Chassis Parts we carry in stock are:

3/8" ID Return Hose (Sold by each) (18070570) – $3.29
OE Replacement (11900835) – $4.99
OE Replacement (11900854) – $4.99
Tapered Roller Bearing (10733410) – $5.99
Quick Connect Coupler (15230008) – $7.99

What are the top-rated Steering and Chassis Parts that fit the 1971 Jeep Wagoneer?

Out of 1,398 reviews by customers, our 1971 Jeep Wagoneer Steering and Chassis Parts have an average customer rating of . These are some of the highest-rated Steering and Chassis Part types for the 1971 Jeep Wagoneer and their top-rated products:

Steering Hardware
- Steering Tie Rod End Adjusting Sleeve (20515467) – $37.99
- New Steering Coupling Assembly (18340126) – $52.99
Tie Rods
- Steering Tie Rod End Adjusting Sleeve (20515467) – $37.99
- New Steering Coupling Assembly (18340126) – $52.99

What types of Steering and Chassis Parts do you sell for my 1971 Jeep Wagoneer?

As of 3/1/26, these are some of the most in-demand types of Steering and Chassis Parts for a 1971 Jeep Wagoneer:

Can I get help with 1971 Jeep Wagoneer Steering and Chassis Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Jeep Steering and Chassis Parts and more.

What is your return policy for Jeep Wagoneer Steering and Chassis Parts?

Advance Auto Parts keeps returns simple. For new Jeep Wagoneer Steering and Chassis Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1971 Jeep Wagoneer Steering and Chassis Parts

Lares – New Steering Coupling Assembly (Part No.201)

Powercraft – Pump Drive Shaft Seal Kit (Part No.8709)

Carquest Premium – Power Steering Repair Fittings, 16mm Male "O" Ring x 3/8" Beaded Tube (Part No.35023)

Carquest Premium – Power Steering Return Hose Assembly, 16mm Male "O" Ring x 3/8" I.D. Hose (Part No.36527)

Powercraft – Steering Gear Input Shaft Seal Kit (Part No.7095)

Crown Auto Jeep Replacmnt – OE Replacement (Part No.J4486140)

Carquest Premium – 5/8" I.D. Reservoir Hose (Part No.35003)

Carquest Premium – Power Steering Pressure Hose Assembly, 16mm Male "O" Ring x 18mm Male "O" Ring – with Switch Port (Part No.35870)

Crown Auto Jeep Replacmnt – OE Replacement (Part No.J4486141)

Imperial – Power Steering Oil Cooler (Part No.241009)

MOOG – Steering Tie Rod End Adjusting Sleeve (Part No.ES362S)

Rare Parts – Tie Rod Sleeve (Part No.RP26561)

National – Tapered Roller Bearing Cone (Part No.11590)

National – Bearing Race (Part No.11520)

Carquest Premium – New Power Steering Gear – Manual (Part No.803-0101CQN)

Lares – New Power Steering Gear Box (Part No.11353)

Yukon Gear – Ball Joint Kit For Dana 30, Dana 44 & GM 8.5", Not Dodge, One Side (Part No.33453)

MOOG – Suspension Ball Joint (Part No.K8195T)

National – Multi-Purpose Seal (Part No.PSK-1)

Powercraft – Steering Gear Complete Pitman Shaft Seal Kit (Part No.8766)

Driveworks – Steering Tie Rod End Adjusting Sleeve (Part No.DW-ES2080S)

Carquest Premium – Tie Rod End Adjusting Sleeve (Part No.370-65029)

Cardone – Power Steering Filter (Part No.20-0058F)

Carquest Premium – Power Steering Filter (Part No.20-0038FCQN)

Energy Suspension – Tie Rod Dust Boot (Part No.9.13102G)

Rugged Ridge – Steering Tie Rod End Dust Boot Kit; Black; 46-06 Willys/Jeep (Part No.19-1712BL)

Skyjacker – Heavy Duty Oem Single, White With Red Boot, Mounts To OE Locations (Part No.7009)

Monroe – Magnum Steering Damper (Part No.SC2940)

Driveworks – Steering Tie Rod End Adjusting Sleeve (Part No.DW-ES2004S)

Carquest Premium – Tie Rod End Adjusting Sleeve (Part No.370-65029)

Rugged Ridge – Steering Tie Rod End Dust Boot Kit; Black; 46-06 Willys/Jeep (Part No.19-1712BL)

Cardone – Remanufactured Steering Gear (Part No.27-6537)

Lares – Remanufactured Manual Steering Gear Box (Part No.1034)

Powercraft – Steering Gear Major Seal Kit (Part No.7860)

Lares – New Power Steering Gear Box (Part No.10970)

Rare Parts – Steering Damper Kit (Part No.RP50103)

Lares – Remanufactured Power Steering Gear Box (Part No.972)

PWR – New Power Steering Gear (Part No.61-5770)

Edelmann – Factory New Power Steering Gear (Part No.3025)

Lares – PS GEAR-NEW (Part No.10972)

Lares – PS GEAR BOX-RMFD (Part No.974)

Crown Auto Jeep Replacmnt – New, Manual Steering (Part No.J0994509)

Lares – MAN STG GEAR BX-NEW (Part No.11472)

Lares – Remanufactured Power Steering Gear Box (Part No.970)

Lares – MAN STG GEAR BX-NEW (Part No.11034)

Crown Auto Jeep Replacmnt – OE Replacement (Part No.J4486140)

Cardone – Power Steering Filter (Part No.20-0058F)

Cardone – Power Steering Filter (Part No.20-0012F)

Carquest Premium – Power Steering Repair Fittings, 3/8" Male Inv. Flare x 3/8" Beaded Tube (Part No.35015)

Carquest Premium – 3/8" I.D. Return Hose J189 (Part No.35002)

Cardone – New Power Steering Filter (Part No.20-0038F)

Imperial – Power Steering Oil Cooler (Part No.241009)

Imperial – Quick Connect Coupler (Part No.240250)

Carquest Premium – Power Steering Return Hose Assembly, 3/8" Male Inv. Flare x 3/8" I.D. Hose (Part No.36135)

Carquest Premium – 3/8" ID Return Hose (J189) (Sold by foot) (Part No.35001)

Carquest Premium – 3/8" ID Return Hose (Sold by each) (Part No.34995)

Cardone – Power Steering Filter (Part No.20-P038F)

Carquest Premium – Power Steering Return Hose Assembly, 3/8" Male Inv. Flare x 3/8" I.D. Hose (Part No.35325)

Carquest Premium – 3/8" I.D. Return Hose J189 (Part No.36197)

Edelmann – Elite Power Steering Filter; Fits 99% of Hydraulic Power Steering vehicles (Part No.70699)

Carquest Premium – Power Steering Pressure Hose Assembly, 3/8" Male Inv. Flare x 7/16" Male Inv. Flare (Part No.35536)

Powercraft – Pump Drive Shaft Seal Kit (Part No.8713)

MOOG – Steering Tie Rod End Adjusting Sleeve (Part No.ES2004S)

Lares – New Steering Coupling Assembly (Part No.201)

Yukon Gear – Ball Joint Kit For Dana 30, Dana 44 & GM 8.5", Not Dodge, One Side (Part No.33453)