1971 Jaguar XKE Brake Parts

Essential Brake Parts for 1971 Jaguar XKEs

Ferodo – Premier OE Replacement Brake Pads (Part No.N101037319FER)

Premier OE Replacement Brake Pads

from

$96.15
This part matches Original Equipment (OE) quality specifications which means that it is at least as good if not better than the original part the manufacturer supplied the car with. Vehicle-specific friction material formulations deliver ultimate control, with minimal stopping distances. Shims and chamfers keep noise levels down while maintaining top performance. Extra durability and reduced wear is achieved by exactly matching our friction material formulation to the vehicle application type. A specially-designed thermal underlayer ensures outstanding heat dissipation, reducing the possibility of brake fade. Every Ferodo brake pad comes with all the necessary OE-matched accessories for installation. All Ferodo pads are R90 compliant and go through extensive research, laboratory and road testing to achieve OE manufacturer standards. Your brake pads will be ready to perform, which means they reach maximum efficiency after just one or two brake applications and perform consistently under all temperatures and conditions.

Product Features:
  • Friction materials are matched to vehicle braking systems
  • Exceeds Regulation 90 specification
  • Full ABS compatibility (also TCS, EBD. ASC etc.)
  • Resistance to brake fade from -30C to 700C
  • Designed to minimize brake noise
  • Minimum bedding-in period
  • Reduced disc wear
  • Excellent fade resistance and water recovery characteristics
  • Fitted as original equipment
  • Safety critical accessories included
See More

TRW – Automotive OE Replacement Brake Pads (Part No.N101037319TRW)

Automotive OE Replacement Brake Pads

from

$45.26
This part matches Original Equipment (OE) quality specifications which means that it is at least as good if not better than the original part the manufacturer supplied the car with. TRW has introduced Cotec – an innovative coating for its brake pads. Independent tests have proven that Cotec achieves significantly shorter stopping distances than the brake pads of major competitors or even OE, for the first stops after leaving a garage following a brake pad change. In the normal bedding in process there is a period, known as the green behavior of the pad, which occurs at the start of the bedding in process where the friction co-efficient is lower than usual. Drivers can find it difficult to adjust to the difference in performance during these first stops. TRW Cotec brake pads address this issue by improving the contact between the brake disc and pad. The friction material is the most important part of a brake pad. All TRW’s brake pads contain the optimum mix of raw materials from rubber to graphite. TRW has made a significant investment over the years to ensure that we have the perfect mix – and we make it in-house. The ingredients ensure a stable friction coefficient and the safest braking performance in all temperatures, at all speeds and under all conditions. The backing plates used by TRW are designed, patented and produced in-house to OE specification. They are fitted to the friction material with a unique adhesive compound which can withstand high temperatures and resists extremely high shear strengths. TRW places great emphasis on noise reduction and its brake pads are fitted with high quality shims which act as a damper between the friction material and the brake caliper. TRW friction components are not only tested in our NVH (noise vibration harshness) laboratories and also on the road.

Product Features:
  • Include the OE specified shims.
  • Low noise and reduced vibrations.
  • Formulated to OE Specifications.
  • Superior friction qualities.
  • Organic blended compound.
See More

Zimmermann – Coat-Z Brake Disc (Rotor) (Part No.N100037023ZIC)

Coat-Z Brake Disc (Rotor)

from

$95.36
Since 2008 Zimmermann is offering almost 400 Standard and almost 400 Sports Brake Discs in a coated version named Coat Z. The Zimmermann Coat-Z brake disc provides a protective coating that prevents rust and corrosion, extended rotor life and improved visual appearance. To improve the rust protection during storage and usage, Otto Zimmermann GmbH implements this new Coat-Z technology step by step in its production range. Beside the still optimum function of the brake disc, this coating ensures a consistent attractive appearance. Zimmermann brake discs are usually made of cast iron (with flake graphite) of different qualities; they correspond to the material used for the original spare parts. Therefore, the utilization of such materials (referred to as High Carbon by the competition) has always been a matter of course for Otto Zimmermann.

Product Features:
  • Coat-Z protective anti-corrosion coating
  • No formation of rust at the hub and herewith improved visual appearance
  • Immediate functional capability without removal of the coating before mounting
  • Excellent deceleration action and no distortion of friction ring at high temperatures
  • Substantial weight saving and therefore less unsprung mass
  • Floating mounting enables radial expansion of the brake disc under relatively heavy loads, thus preventing shielding and increasing resistance to heat cracks
  • Hot spots prevented by optimized design of ventilation channels
  • 1:1 exchange of original disc possible
  • Not subject to registration: general ABE certification supplied with disc
  • No conversion required for brake tuning
See More

WBR Coated – Run-True Metallurgic-Gray Coated Brake Disc (Rotor) (Part No.N100037023WBC)

Run-True Metallurgic-Gray Coated Brake Disc (Rotor)

from

$74.65
WBR Run True Technology Metallurgic-Gray (MG) Finished Rotors All World Brake Resources (WBR) brake rotors with Run-True technology are manufactured to match the exact OE fit, OE construction, and precision finishing to ensure quick and easy installation, as well as trouble-free functionality for the life of the rotor. The Metallurgic-Gray coating is applied to all outward non-friction surfaces including in the gap between the plates covering the cooling vanes and cured through an oven drying process. The Gray coating provides an effective anti-rust protection to help maintain a clean appearance. The coating used for WBR is also similar to the OE color used by many OE car makes. WBR Brake Rotors with Run-True Technology have ultra tight tolerances that provide the finest braking experience, from break in throughout the life of the rotor, reducing the chance of warping even under extreme braking temperatures. The coated brake disc provides a protective water based coating that prevents rust and corrosion, extended rotor life and improved visual appearance. WBR Brake Rotors are manufactured to meet or exceed the original equipment manufacturer specification for durability, fit, and function.

Product Features:
  • High metallurgical and machining standard to improve stopping distances
  • Produced to match OE design fitment – G 3000 gray iron
  • Mill balanced
  • TS16949 certified
  • Non-directional finish provides smooth vibration free performance
  • No need for machining prior to installation
  • Durable Metallurgic-Gray finish to all outward non-friction surfaces
  • Metallurgic-Gray anti-rust protection to help maintain a clean appearance
  • Compatible with NAO, Ceramic and Semi-Met pad compounds for reduced noise
  • Designed to minimize brake fade and extend pad and rotor life
See More

Eurospares – Brake Disc (Rotor) (Part No.N100042499ESP)

Brake Disc (Rotor)

from

$47.68
The Eurospare brake disc is an OE-equivalent replacement that provides original equipment quality and performance.

Product Features:
  • OE-Equivalent and a direct fit replacement
  • Enhanced heat transfer
  • Reduced rotor wear
See More

Carquest Wearever – Disc Brake Hardware Kit (Part No.H4755)

Disc Brake Hardware Kit

from

$2.99
Brakes are designed as a system and all the parts need to work together for best performance. The kits provide advance protection for your brake by assuring brakes perform at an optimum level.

Product Features:
  • This part matches Original Equipment (OE) quality specifications
  • Exact fitment and original replacement
  • New Brake Hardware prevents premature wear and maximizes performance
  • Helps deliver a quieter, more efficient braking system
  • Manufactured with quality materials to suppress high stress levels
See More

Eurospares – Brake Reservoir Cap (Part No.N303042490ESP)

Brake Reservoir Cap

from

$87.32
Brake Reservoir Cap

WBR – Disc Brake Hardware Pro-Kit (Part No.N1061460544WBR)

Disc Brake Hardware Pro-Kit

from

$6.72
New Brake Hardware – Back to like-new performance The WBR complete disc brake hardware kits provide everything you need to perform a complete the brake job and restore the brake system back to the optimal like new operating condition. Disc hardware can lose 50% of spring tension within 1-2 years, which can cause pads to stick, create uneven pad wear, and lead to unwanted brake noise.

Product Features:
  • Reduced Brake Noise, comebacks and unsatisfied customers,
  • Extends the life of a brake job,
  • Improved fuel mileage, and
  • Restores brakes to like new Performance. Effects of Corrosion, Heat, Stress, Use Rust and Corrosion on floating caliper slides or bushings can prevent the caliper from centering properly, which can
  • reduce effective braking force
  • cause uneven pad wear, and brake noise. Rubber Bushings lose there resiliency and become flattened from the torque of the braking system which can
  • cause excessive caliper movement
  • cause unwanted noise like rattles and thumps.
See More

Carquest Wearever – Disc Brake Hardware Kit (Part No.15565A)

Disc Brake Hardware Kit

from

$7.29
Brakes are designed as a system and all the parts need to work together for best performance. The kits provide advance protection for your brake by assuring brakes perform at an optimum level.

Product Features:
  • This part matches Original Equipment (OE) quality specifications
  • Exact fitment and original replacement
  • Helps deliver a quieter, more efficient braking system
  • Low-friction PTFE coating to reduce drag
  • Manufactured with quality materials to suppress high stress levels
See More

Carquest Standard – Brake Pads: Reliable and Dependable Stopping (Part No.NAD4)

Brake Pads: Reliable and Dependable Stopping

from

$15.00
Carquest Standard brake pads are designed for original equipment (O.E.) fit, form and function for dependable stopping while providing great value. Our brake pads use quality friction formulas for reliable stopping power. Carquest Standard brake pads feature a single-layer shim that absorbs noise and vibration to provide quiet braking. These brake pads also utilize slots and chamfers based on the OE design. Carquest Standard brake pads are the right choice when looking for good performance at a great price

Product Features:
  • Dependable stopping power
  • Single layer shim for quiet braking
  • OE-designed slots and chamfers to reduce noise and vibration
See More

Carquest Standard – Brake Pads: Reliable and Dependable Stopping (Part No.NAD9)

Brake Pads: Reliable and Dependable Stopping

from

$17.79
Carquest Standard brake pads are designed for original equipment (O.E.) fit, form and function for dependable stopping while providing great value. Our brake pads use quality friction formulas for reliable stopping power. Carquest Standard brake pads feature a single-layer shim that absorbs noise and vibration to provide quiet braking. These brake pads also utilize slots and chamfers based on the OE design. Carquest Standard brake pads are the right choice when looking for good performance at a great price

Product Features:
  • Dependable stopping power
  • Single layer shim for quiet braking
  • OE-designed slots and chamfers to reduce noise and vibration
See More

Upgrade your 1971 Jaguar XKE with Top-Quality Brake Parts

When it comes to maintaining or upgrading your 1971 Jaguar XKE, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Jaguar or enhancing its overall performance, Brake Parts are key to keeping your XKE functioning at its best. At Advance Auto Parts, we offer a wide selection of 12 Brake Parts for the 1971 Jaguar XKE, designed to meet your needs without breaking the bank. From Parking Brake replacements to Brake Rotors and Drums upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Brake Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Brake Parts for your 1971 Jaguar XKE at great prices. Our Brake Parts inventory for this model ranges from just $2.99 to $96.15, with an average price of $37.52. Our 12 Brake Parts in stock come from 7 trusted brands, so you’re sure to find the right part for your 1971 Jaguar XKE without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1971 Jaguar XKE, we stock popular OEM and aftermarket Brake Parts from top names like TRW Carquest, and more. TRW Brake Parts start at just $45.26 and boast an impressive 5 stars average rating from customers. With 6 customer reviews and counting, our 1971 Jaguar XKE Brake Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Brake Part upgrades. Explore related part types like Batteries and Chargers, Fluids and Chemicals and more to make sure your 1971 Jaguar XKE is always ready to roll. We’re committed to providing you with everything you need to keep your XKE in top shape, all in one place. Start shopping confidently below for your 1971 Jaguar XKE!

Best-Selling Parking Brakes for 1971 Jaguar XKEs

Enhance the driving experience in your Jaguar with 1 quality Parking Brake components, starting at $2.99.

Carquest Wearever – Disc Brake Hardware Kit (Part No.H4755)

Disc Brake Hardware Kit

from

$2.99
Brakes are designed as a system and all the parts need to work together for best performance. The kits provide advance protection for your brake by assuring brakes perform at an optimum level.

Product Features:
  • This part matches Original Equipment (OE) quality specifications
  • Exact fitment and original replacement
  • New Brake Hardware prevents premature wear and maximizes performance
  • Helps deliver a quieter, more efficient braking system
  • Manufactured with quality materials to suppress high stress levels
See More

Most Popular 1971 Jaguar XKE Brake Rotors and Drums

Customize your Jaguar with 3 Brake Rotors and Drums products like Front Brake Rotors, all priced under $95.36.

Zimmermann – Coat-Z Brake Disc (Rotor) (Part No.N100037023ZIC)

Coat-Z Brake Disc (Rotor)

from

$95.36
Since 2008 Zimmermann is offering almost 400 Standard and almost 400 Sports Brake Discs in a coated version named Coat Z. The Zimmermann Coat-Z brake disc provides a protective coating that prevents rust and corrosion, extended rotor life and improved visual appearance. To improve the rust protection during storage and usage, Otto Zimmermann GmbH implements this new Coat-Z technology step by step in its production range. Beside the still optimum function of the brake disc, this coating ensures a consistent attractive appearance. Zimmermann brake discs are usually made of cast iron (with flake graphite) of different qualities; they correspond to the material used for the original spare parts. Therefore, the utilization of such materials (referred to as High Carbon by the competition) has always been a matter of course for Otto Zimmermann.

Product Features:
  • Coat-Z protective anti-corrosion coating
  • No formation of rust at the hub and herewith improved visual appearance
  • Immediate functional capability without removal of the coating before mounting
  • Excellent deceleration action and no distortion of friction ring at high temperatures
  • Substantial weight saving and therefore less unsprung mass
  • Floating mounting enables radial expansion of the brake disc under relatively heavy loads, thus preventing shielding and increasing resistance to heat cracks
  • Hot spots prevented by optimized design of ventilation channels
  • 1:1 exchange of original disc possible
  • Not subject to registration: general ABE certification supplied with disc
  • No conversion required for brake tuning
See More

WBR Coated – Run-True Metallurgic-Gray Coated Brake Disc (Rotor) (Part No.N100037023WBC)

Run-True Metallurgic-Gray Coated Brake Disc (Rotor)

from

$74.65
WBR Run True Technology Metallurgic-Gray (MG) Finished Rotors All World Brake Resources (WBR) brake rotors with Run-True technology are manufactured to match the exact OE fit, OE construction, and precision finishing to ensure quick and easy installation, as well as trouble-free functionality for the life of the rotor. The Metallurgic-Gray coating is applied to all outward non-friction surfaces including in the gap between the plates covering the cooling vanes and cured through an oven drying process. The Gray coating provides an effective anti-rust protection to help maintain a clean appearance. The coating used for WBR is also similar to the OE color used by many OE car makes. WBR Brake Rotors with Run-True Technology have ultra tight tolerances that provide the finest braking experience, from break in throughout the life of the rotor, reducing the chance of warping even under extreme braking temperatures. The coated brake disc provides a protective water based coating that prevents rust and corrosion, extended rotor life and improved visual appearance. WBR Brake Rotors are manufactured to meet or exceed the original equipment manufacturer specification for durability, fit, and function.

Product Features:
  • High metallurgical and machining standard to improve stopping distances
  • Produced to match OE design fitment – G 3000 gray iron
  • Mill balanced
  • TS16949 certified
  • Non-directional finish provides smooth vibration free performance
  • No need for machining prior to installation
  • Durable Metallurgic-Gray finish to all outward non-friction surfaces
  • Metallurgic-Gray anti-rust protection to help maintain a clean appearance
  • Compatible with NAO, Ceramic and Semi-Met pad compounds for reduced noise
  • Designed to minimize brake fade and extend pad and rotor life
See More

Eurospares – Brake Disc (Rotor) (Part No.N100042499ESP)

Brake Disc (Rotor)

from

$47.68
The Eurospare brake disc is an OE-equivalent replacement that provides original equipment quality and performance.

Product Features:
  • OE-Equivalent and a direct fit replacement
  • Enhanced heat transfer
  • Reduced rotor wear
See More

Top Picks for 1971 Jaguar XKE Brake Pads and Shoes

Upgrade Jaguar XKEs with top-quality Brake Pads and Shoes parts, including 4 OEM and aftermarket selections for your 1971 model.

TRW – Automotive OE Replacement Brake Pads (Part No.N101037319TRW)

Automotive OE Replacement Brake Pads

from

$45.26
This part matches Original Equipment (OE) quality specifications which means that it is at least as good if not better than the original part the manufacturer supplied the car with. TRW has introduced Cotec – an innovative coating for its brake pads. Independent tests have proven that Cotec achieves significantly shorter stopping distances than the brake pads of major competitors or even OE, for the first stops after leaving a garage following a brake pad change. In the normal bedding in process there is a period, known as the green behavior of the pad, which occurs at the start of the bedding in process where the friction co-efficient is lower than usual. Drivers can find it difficult to adjust to the difference in performance during these first stops. TRW Cotec brake pads address this issue by improving the contact between the brake disc and pad. The friction material is the most important part of a brake pad. All TRW’s brake pads contain the optimum mix of raw materials from rubber to graphite. TRW has made a significant investment over the years to ensure that we have the perfect mix – and we make it in-house. The ingredients ensure a stable friction coefficient and the safest braking performance in all temperatures, at all speeds and under all conditions. The backing plates used by TRW are designed, patented and produced in-house to OE specification. They are fitted to the friction material with a unique adhesive compound which can withstand high temperatures and resists extremely high shear strengths. TRW places great emphasis on noise reduction and its brake pads are fitted with high quality shims which act as a damper between the friction material and the brake caliper. TRW friction components are not only tested in our NVH (noise vibration harshness) laboratories and also on the road.

Product Features:
  • Include the OE specified shims.
  • Low noise and reduced vibrations.
  • Formulated to OE Specifications.
  • Superior friction qualities.
  • Organic blended compound.
See More

Carquest Standard – Brake Pads: Reliable and Dependable Stopping (Part No.NAD9)

Brake Pads: Reliable and Dependable Stopping

from

$17.79
Carquest Standard brake pads are designed for original equipment (O.E.) fit, form and function for dependable stopping while providing great value. Our brake pads use quality friction formulas for reliable stopping power. Carquest Standard brake pads feature a single-layer shim that absorbs noise and vibration to provide quiet braking. These brake pads also utilize slots and chamfers based on the OE design. Carquest Standard brake pads are the right choice when looking for good performance at a great price

Product Features:
  • Dependable stopping power
  • Single layer shim for quiet braking
  • OE-designed slots and chamfers to reduce noise and vibration
See More

Ferodo – Premier OE Replacement Brake Pads (Part No.N101037319FER)

Premier OE Replacement Brake Pads

from

$96.15
This part matches Original Equipment (OE) quality specifications which means that it is at least as good if not better than the original part the manufacturer supplied the car with. Vehicle-specific friction material formulations deliver ultimate control, with minimal stopping distances. Shims and chamfers keep noise levels down while maintaining top performance. Extra durability and reduced wear is achieved by exactly matching our friction material formulation to the vehicle application type. A specially-designed thermal underlayer ensures outstanding heat dissipation, reducing the possibility of brake fade. Every Ferodo brake pad comes with all the necessary OE-matched accessories for installation. All Ferodo pads are R90 compliant and go through extensive research, laboratory and road testing to achieve OE manufacturer standards. Your brake pads will be ready to perform, which means they reach maximum efficiency after just one or two brake applications and perform consistently under all temperatures and conditions.

Product Features:
  • Friction materials are matched to vehicle braking systems
  • Exceeds Regulation 90 specification
  • Full ABS compatibility (also TCS, EBD. ASC etc.)
  • Resistance to brake fade from -30C to 700C
  • Designed to minimize brake noise
  • Minimum bedding-in period
  • Reduced disc wear
  • Excellent fade resistance and water recovery characteristics
  • Fitted as original equipment
  • Safety critical accessories included
See More

Carquest Standard – Brake Pads: Reliable and Dependable Stopping (Part No.NAD4)

Brake Pads: Reliable and Dependable Stopping

from

$15.00
Carquest Standard brake pads are designed for original equipment (O.E.) fit, form and function for dependable stopping while providing great value. Our brake pads use quality friction formulas for reliable stopping power. Carquest Standard brake pads feature a single-layer shim that absorbs noise and vibration to provide quiet braking. These brake pads also utilize slots and chamfers based on the OE design. Carquest Standard brake pads are the right choice when looking for good performance at a great price

Product Features:
  • Dependable stopping power
  • Single layer shim for quiet braking
  • OE-designed slots and chamfers to reduce noise and vibration
See More

In-Demand Brake Kits for 1971 Jaguar XKEs

Select from 3 premium Brake Kits parts for your 1971 Jaguar XKE, with prices ranging from $6.72 to $7.59.

Carquest Wearever – Disc Brake Hardware Kit (Part No.15565A)

Disc Brake Hardware Kit

from

$7.29
Brakes are designed as a system and all the parts need to work together for best performance. The kits provide advance protection for your brake by assuring brakes perform at an optimum level.

Product Features:
  • This part matches Original Equipment (OE) quality specifications
  • Exact fitment and original replacement
  • Helps deliver a quieter, more efficient braking system
  • Low-friction PTFE coating to reduce drag
  • Manufactured with quality materials to suppress high stress levels
See More

Autopart International Inc – Brake Hardware Kit (Part No.N10613123138API)

Brake Hardware Kit

from

$7.59
Brake Hardware Kit

WBR – Disc Brake Hardware Pro-Kit (Part No.N1061460544WBR)

Disc Brake Hardware Pro-Kit

from

$6.72
New Brake Hardware – Back to like-new performance The WBR complete disc brake hardware kits provide everything you need to perform a complete the brake job and restore the brake system back to the optimal like new operating condition. Disc hardware can lose 50% of spring tension within 1-2 years, which can cause pads to stick, create uneven pad wear, and lead to unwanted brake noise.

Product Features:
  • Reduced Brake Noise, comebacks and unsatisfied customers,
  • Extends the life of a brake job,
  • Improved fuel mileage, and
  • Restores brakes to like new Performance. Effects of Corrosion, Heat, Stress, Use Rust and Corrosion on floating caliper slides or bushings can prevent the caliper from centering properly, which can
  • reduce effective braking force
  • cause uneven pad wear, and brake noise. Rubber Bushings lose there resiliency and become flattened from the torque of the braking system which can
  • cause excessive caliper movement
  • cause unwanted noise like rattles and thumps.
See More

Most Sold 1971 Jaguar XKE Brake Master Cylinders

Explore our best-selling Jaguar parts for the 1971 XKE among 1 OEM and aftermarket options starting from $87.32.

Eurospares – Brake Reservoir Cap (Part No.N303042490ESP)

Brake Reservoir Cap

from

$87.32
Brake Reservoir Cap

Top-Rated Brake Parts Brands For Your 1971 Jaguar XKE

Shop for the best-rated brands offering Brake Parts and other products for your 1971 Jaguar XKEs. Below you’ll find some of our best rated Brake Parts from TRW and Carquest, and more. Brake Parts from these brands that fit a 1971 XKE start at just $2.99 and are rated as high as 5 stars. OEM and aftermarket Brake Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular TRW 1971 Jaguar XKE Brake Parts

When it comes to maintaining or upgrading your 1971 Jaguar XKE, using quality Brake Parts is essential to ensure durability and a perfect fit. TRW ticks all of those boxes. We offer a wide selection of TRW Brake Parts, specifically designed for the 1971 Jaguar XKE. With over 1 TRW brand Brake Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $45.26. Plus, with over 1 customer reviews and an average rating of 5 stars, you can trust that our TRW Brake Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

Automotive OE Replacement Brake Pads
from
$45.26

(1)

Automotive OE Replacement Brake Pads

“Had it installed very happy with results can dial carb for good performance”

Popular Carquest 1971 Jaguar XKE Brake Parts

Carquest auto parts is one of the highest quality Brake Part brands in the market. Any 1971 Jaguar XKE owner should feel confident when installing genuine Carquest parts in their vehicle. To ensure the best fit and performance for your 1971 XKE, Advance Auto Parts carries a full inventory of 4 Carquest Brake Parts. Plus you will be keeping your Jaguar in peak condition while saving money because prices on these Carquest Brake Parts range from $2.99 to $17.79, plus, with more than 1 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Brake Parts below will deliver on both quality and value.

Brake Pads: Reliable and Dependable Stopping
from
$15
This product is not rated

Brake Pads: Reliable and Dependable Stopping

“”

Disc Brake Hardware Kit
from
$2.99
This product is not rated

Disc Brake Hardware Kit

“”

Brake Pads: Reliable and Dependable Stopping
from
$17.79
This product is not rated

Brake Pads: Reliable and Dependable Stopping

“”

FAQs for 1971 Jaguar XKE Brake Parts

Which Brake Parts are best-sellers for 1971 Jaguar XKEs?

Out of 12 Brake Parts that fit 1971 Jaguar XKEs, the following parts are the top sellers:

What’s the price range for 1971 Jaguar XKE Brake Parts?

Brake Part prices for the 1971 Jaguar XKE start at $2.99 and go up to $96.15 for the most premium parts.

What’s the average price of a Brake Part for a 1971 Jaguar XKE?

The average price for Brake Parts for the 1971 Jaguar XKE is $37.52. Keep in mind the variety of part types within our Brake Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Brake Parts for other Jaguar XKE model years?

Yes, we currently carry Brake Parts for 12 model years of Jaguar XKEs between 1962 and 1974. Brake Parts are bought most frequently for the following model years: 1974, 1973, 1972, 1970, 1969, 1968, 1967, 1966, and 1965.

What are the cheapest Brake Parts for my 1971 Jaguar XKE?

The cheapest 1971 Jaguar XKE Brake Parts we carry in stock are:

What are the top-rated Brake Parts that fit the 1971 Jaguar XKE?

Out of 6 reviews by customers, our 1971 Jaguar XKE Brake Parts have an average customer rating of . These are some of the highest-rated Brake Part types for the 1971 Jaguar XKE and their top-rated products:

What types of Brake Parts do you sell for my 1971 Jaguar XKE?

As of 2/5/25, these are some of the most in-demand types of Brake Parts for a 1971 Jaguar XKE:

Can I get help with 1971 Jaguar XKE Brake Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Jaguar Brake Parts and more.

What is your return policy for Jaguar XKE Brake Parts?

Advance Auto Parts keeps returns simple. For new Jaguar XKE Brake Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.