1971 Dodge Charger Exhaust Parts
Find Your Specific 1971 Dodge Charger Exhaust Parts
Below you will find various in-demand Dodge Exhaust Parts, components and accessories for your 1971 Charger. Advance Auto Parts has popular Charger parts like Exhaust Mufflers, Exhaust Fittings, Exhaust Pipes and more. You’ll also find aftermarket and OEM Exhaust Parts for other Charger model years including
2015,
2016,
2017,
2018,
2019,
2020,
2021,
2022,
2023 and more. Select a category of 1971 Dodge Charger Exhaust Parts below and start saving instantly.
Popular 1971 Dodge Charger Exhaust Parts Categories
Essential Exhaust Parts for 1971 Dodge Chargers
Flowmaster Inc. – Super 44 Series Muffler, 2.5in Offset Inlet 2.5in Center Outlet, Non-Reversible, Aggressive Sound (Part No.942546)
from
$113.99
Flowmaster’s Super 44 muffler uses the same Delta Flow technology found in our larger Super 40 mufflers. The Super 44 delivers a powerful rich tone and is the most aggressive, deepest sounding, highest performing four inch case street muffler we’ve ever built! Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More
Walker – Quiet-Flow Muffler, Direct Replacement, No Fabrication Needed (Part No.52381)
from
$113.99
Combining the only broad-market stainless-steel body construction with a direct fit OE-style replacement, Walker Quiet-Flow SS muffler assemblies deliver longer life than typical aluminized mufflers and are available for domestic and foreign vehicles.
Product Features:
See More
Product Features:
- CORROSION RESISTANT STAINLESS STEEL — The only broad-market muffler body with 100% stainless-steel construction that delivers longer life versus aluminized mufflers while an internal drainage system reduces moisture collection
- EASY TO INSTALL — Direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation and doesn’t require specialized fabrication and/or welding
- BUILT TO LAST — Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
- PREMIUM ACOUSTIC CONTROL — OE-style louvered tubes lower noise levels while OE-style domed heads help reduce radiated noise for premium factory-style sound quality compared to straight perforated tubes
- DESIGN VALIDATED — Acoustic and flow tested for quality OE-style sound you can count on
Dorman – Help – Exhaust Manifold Stud (Part No.03211CD)
from
$40.99
This exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles, and is made from quality materials for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles.
- Ideal solution – this kit is a reliable replacement for the original hardware that is missing or damaged, or has failed
- Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Help – Exhaust Manifold Hardware Kit (Part No.03211)
from
$33.99
This exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles, and is made from quality materials for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles.
- Ideal solution – this kit is a reliable replacement for the original hardware that is missing or damaged, or has failed
- Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
MagnaFlow – Performance Exhaust Manifold Down Pipe (Part No.19343)
from
$294.99
Upgraded front pipes for optimized performance.
Product Features:
See More
Product Features:
- Unrestricted flow
- CNC precision robotic manufacturing techniques
- Durable corrosion-resistant stainless steel construction
Flowmaster Inc. – Prebent Tailpipes – 2.50 in. Rear Exit – Pair (Part No.15806)
from
$226.99
Prebent pipe kits. Flowmaster’s 16 gauge mandrel bent pipe kits are designed to fit perfectly onto your vehicle with all the quality and performance that you would expect from Flowmaster.
See More
Dynomax – Exhaust Tail Pipe (Part No.55592)
from
$96.99
Made from quality materials for durability, DynoMax pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.
Product Features:
See More
Product Features:
- IMPROVED FLOW CAPACITY — Mandrel bends (where applicable) improve flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
- DESIGNED TO PERFORM — Fixture checked to ensure a precise fit for quick and easy installation
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS?–?Made from stainless steel for durability and long life
- BETTER TOGETHER — Use premium DynoMax accessories when installing DynoMax mufflers and exhaust systems for a complete performance exhaust system upgrade
MagnaFlow – Street Series Cat-Back Performance Exhaust System (Part No.15494)
from
$1626.99
The MagnaFlow 2012-2014 Dodge Charger Street Series Cat-Back Performance Exhaust System brings out the personality of your 6.4L 2012-2014 Dodge Charger with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 3in. main piping and 4 Straight-Through mufflers ending in a Dual Split Rear exit with 4in. Polished Welded-On Double Wall Angle Cut Folded Edge tips, this Dodge Charger exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Dodge Charger’s to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15494 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15494 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.
Product Features:
See More
Product Features:
- Dyno-proven performance
- Durable corrosion-resistant stainless steel construction
- CNC precision robotic manufacturing techniques
Dynomax – Dual – 2.5in Cat-Back Exhaust System – Super Turbo Mufflers: Stainless Steel (Part No.39525)
from
$712.99
Give your Chrysler 300 or Dodge Charger’s exhaust system an upgrade with a DynoMax Super Turbo dual 2.5-in. cat-back exhaust system. Features two DynoMax Super Turbo mufflers that channel exhaust flow, reduce turbulence and absorb unwanted interior resonance for a mellow tone.
Product Features:
See More
Product Features:
- COMPATIBILITY — Designed for 2011-2014 Chrysler 300 and Dodge Charger 3.6L V6; see product information for compatibility and engine specs
- PERFORMANCE UPGRADE — Enhance your vehicle¿s exhaust system with this kit that can give an 8HP and 9-Lb. Ft. torque improvement
- PERFORMANCE UPGRADE — Enhance your vehicle┐s exhaust system with this kit that can give an 8HP and 9-Lb. Ft. torque improvement
- COMPLETE SOLUTION — Includes two DynoMax Super Turbo mufflers, front X-pipe, tail pipes and clamps
- EASY TO INSTALL — Direct-fit pre-assembled solution with welded hangers, pipes and clamps for easy installation that doesn¿t require specialized fabrication and/or welding
- EASY TO INSTALL — Direct-fit pre-assembled solution with welded hangers, pipes and clamps for easy installation that doesn┐t require specialized fabrication and/or welding
- IMPROVED FLOW CAPACITY — Stainless-steel tubing with mandrel bends improves flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
- PRECISION DESIGN — Exclusive flow director technology channels exhaust flow and reduces turbulence on most applications
- PREMIUM PERFORMANCE — Large flow tubes improve exhaust flow and reduce backpressure
- ENGINEERED TO LAST¿– Stainless-steel muffler reduces corrosion and internal drainage system reduces moisture collection
- ENGINEERED TO LAST┐– Stainless-steel muffler reduces corrosion and internal drainage system reduces moisture collection
- SPECS — 2.5-in. Straight cut tail pipes
Dynomax – Dual – 2.5in Cat-Back Exhaust System – Super Turbo Mufflers: Stainless Steel (Part No.39518)
from
$553.99
Give your Chrysler 300 or Dodge Charger’s exhaust system an upgrade with a DynoMax Super Turbo dual 2.5-in. cat-back exhaust system. Features two DynoMax Super Turbo mufflers that channel exhaust flow, reduce turbulence and absorb unwanted interior resonance for a mellow tone.
Product Features:
See More
Product Features:
- COMPATIBILITY — Designed for 2011-2014 Chrysler 300 and Dodge Charger 5.7L V8; see product information for compatibility and engine specs
- PERFORMANCE UPGRADE — Enhance your vehicle¿s exhaust system with this kit that can give a 13HP and 24-Lb. Ft. torque improvement
- PERFORMANCE UPGRADE — Enhance your vehicle┐s exhaust system with this kit that can give a 13HP and 24-Lb. Ft. torque improvement
- COMPLETE SOLUTION — Includes two DynoMax Super Turbo mufflers, X-pipe, tail pipes and clamps
- EASY TO INSTALL — Direct-fit pre-assembled solution with welded hangers, pipes and clamps for easy installation that doesn¿t require specialized fabrication and/or welding
- EASY TO INSTALL — Direct-fit pre-assembled solution with welded hangers, pipes and clamps for easy installation that doesn┐t require specialized fabrication and/or welding
- IMPROVED FLOW CAPACITY — Stainless-steel tubing with mandrel bends improves flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
- PRECISION DESIGN — Exclusive flow director technology channels exhaust flow and reduces turbulence on most applications
- PREMIUM PERFORMANCE — Large flow tubes improve exhaust flow and reduce backpressure
- ENGINEERED TO LAST¿– Stainless-steel muffler reduces corrosion and internal drainage system reduces moisture collection
- ENGINEERED TO LAST┐– Stainless-steel muffler reduces corrosion and internal drainage system reduces moisture collection
- SPECS — 2.5-in. Straight cut tail pipes
BRExhaust – Exhaust Flange Gasket (Part No.256-1021)
from
$21.29
BRExhaust replacement exhaust brackets make repairs easy. Each gasket has been engineered to according to OE standards to ensure a gas-tight connection and precise fitment. Utilizing the OE specifications also makes installation easy.
Product Features:
See More
Product Features:
- Designed to facilitate hassle-free exhaust repair
- Precise fitment
- Manufactured from quality materials to ensure maximum durability
- Designed for a leak free connection
- OE structure and design
- Built to OEM specifications
- Secure gas-tight connection
Felpro – Exhaust Pipe Flange Gasket (Part No.61240)
from
$7.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Felpro – Exhaust Pipe Flange Gasket (Part No.61710)
from
$15.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Flowmaster Inc. – Header 409S – Block Hugger – 2.50 in. Stock Flange Outlet – Pair (Part No.814321)
from
$879.99
Flowmaster’s Scavenger Series Elite shorty headers are designed to replace the restrictive factory manifolds. These high quality headers are manufactured from stainless steel and are ceramic coated for maximum durability. They feature 1-3/4 in. Primary tubes, 3/8 in. thick laser cut flanges and factory collector connections, ensuring a direct-fit, leak free installation. Like all Flowmaster products, the benefits include improved throttle response, power and engine efficiency. Designed for an easy fit, these headers include gaskets and necessary hardware for easy installation. Note: this product is legal only for off-highway use (except in California or states that have adopted California emission standards), racing use or for use on pre-emission-controlled motor vehicles/motor vehicle engines (pre-1966 domestic vehicles certified to California standards, pre-1968 domestic vehicles certified to federal standards and all pre-1968 foreign vehicles), per the application guide.
Product Features:
See More
Product Features:
- Stainless steel construction
- Engineered for perfect fit
- Dyno tuned for maximum performance
- High temperature ceramic coated
- 0.375 thick laser cut flanges
JBA Performance – 05-08 Dodge Mag/Char (Part No.1964SJS)
from
$809.99
05-08 Dodge Mag/Char
Dorman – Direct Fit Exhaust Manifold: Without Heat Shield (Part No.674-232)
from
$468.99
This exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the original manifold on specified vehicles. It includes all necessary gaskets and downpipe hardware for a complete repair.
Product Features:
See More
Product Features:
- Ideal replacement – this exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the stock manifold on specified vehicles.
- Reliable construction – durable materials resist warping, cracking and leaking for long-lasting performance.
- Complete repair – includes all necessary gaskets and downpipe hardware
- Trustworthy design – built by industry leader in aftermarket manifolds
BRExhaust – Exhaust Clamp (Part No.250-065)
from
$8.29
Sourcing mounting parts from the manufacturer that designs and makes the exhaust system is the only way to guarantee the perfect fit. That’s why, whilst developing the exhaust system, BRExhaust also develops the installation hardware to the same standards.
Product Features:
See More
Product Features:
- whilst developing the exhaust system
- BRExhaust also develops the installation hardware to the same standards.
- Manufactured from quality materials to ensure maximum durability
- Proper fit and functionality to finish your install
- Perfect, gas-tight performance
- Exhaust accessory that facilitates a complete installation process.
- Built to OEM specifications
Walker – Exhaust Clamp (Part No.35344)
from
$2.79
Complete your exhaust repair with an Exhaust Mate U-bolt clamp. Designed to ensure a tight, leak-resistant connection, Exhaust Mate hardware is manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- CONNECTS EXHAUST PARTS — Provides secure, leak-resistant connection
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS?–?Made from quality material for durability and long life
- BETTER TOGETHER — Use Walker accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade
Walker – Clamp U-Bolt Bolt Dia 0.375 Length Nut Type Hex Pipe Dia 2.75 (Part No.35793)
from
$2.99
Complete your exhaust repair with an Exhaust Mate U-bolt clamp. Designed to ensure a tight, leak-resistant connection, Exhaust Mate hardware is manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- CONNECTS EXHAUST PARTS — Provides secure, leak-resistant connection
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS?–?Made from quality material for durability and long life
- BETTER TOGETHER — Use Walker accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade
Walker – Exhaust Pipe Flange Gasket (Part No.31311)
from
$3.29
Complete your exhaust repair with Walker gaskets and flanges. Available in a variety of styles and sizes, they¿re designed to work with OE exhaust components and Walker aftermarket replacement parts.
Product Features:
See More
Product Features:
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
- HEAT RESISTANT — Designed to resist heat for long-lasting performance
- PREMIUM MATERIALS — Made from high-quality materials for durability and long life
- ENGINEERING EXPERTISE — Parts are reviewed and validated and approved by Walker engineers through rigorous research and development
- REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
- EASIER TO INSTALL — Featuring slotted bolt holes (where applicable) for easy installation, gasket slips into place
- BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
Walker – Exhaust Tail Pipe 2.25" Inlet (OD) 2.25" Outlet (OD) (Part No.41206)
from
$23.79
Made from aluminized steel for durability, Walker premium pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.
Product Features:
See More
Product Features:
- RESISTS CORROSION — Durable aluminized steel construction for corrosion resistance and performance
- EASY TO INSTALL — Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
- OE-STYLE PERFORMANCE — Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
- BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information
aFe POWER – Exhaust Tip Carbon (Part No.49C32068-C)
from
$441.99
Dual Wall Construction:The MACH Force-Xp direct-fit clamp-on tips feature a carbon fiber outer wall and 304 stainless-steel inner wall for heat and corrosion resistance for long lasting good looks.Slotted Air Vents:Designed with slotted air vents to allow hot exhaust to dissipate, reducing surface heat and keeping the carbon fiber surface cooler.aFe POWER Logo:These tips feature an aFe POWER logo for an aggressive, custom look.
Product Features:
See More
Product Features:
- Double-Walled Slash Cut Design
- Stainless Steel Construction
- Direct Bolt-On
- Carbon Fiber Outer Layer
Flowtech – Terminator; Exhaust Tips (Part No.59905FLT)
from
$85.99Product Features:
- Show Quality Chrome Platinum
- Durable Black Finish
- Can Be Welded Or Clamped
- Complete The System
- Glass-Packed Resonators
Felpro – EXHAUST MANIFOLD GASKET SET (Part No.MS 91483)
from
$16.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
- Contains all gaskets and seals to remove and replace exhaust manifold
Taylor Gaskets – Seal-4-Good Header Flange Gasket (Part No.66036)
from
$51.99
Seal-4-Good Header Flange Gasket
Felpro – Exhaust Manifold Gasket Set (Part No.MS 9342 B)
from
$19.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
- Contains all gaskets and seals to remove and replace exhaust manifold
- Contains all gaskets and seals to remove and replace exhaust manifold
Mr. Gasket – Exhsthdrgskt (Part No.7430G)
from
$41.49
Upgrade to Mr. Gasket Aluminum Layered Header Gaskets and eliminate blown exhaust gaskets forever. They conform to warped and damaged surfaces to create an airtight, leak-proof seal and will not shrink or deteriorate EVER.
Product Features:
See More
Product Features:
- Reusable header or exhaust manifold gasket set
- Conforms to and seals surface irregularities (warp
- Will not shrink deteriorate or blow out
- Compresses to .060 creates tight leak proof seal
Elring – Exhaust Manifold Gas (Part No.A8111495015ELR)
from
$33.87
Exhaust Manifold Gas
Upgrade your 1971 Dodge Charger with Top-Quality Exhaust Parts
When it comes to maintaining or upgrading your 1971 Dodge Charger, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Dodge or enhancing its overall performance, Exhaust Parts are key to keeping your Charger functioning at its best. At Advance Auto Parts, we offer a wide selection of 41 Exhaust Parts for the 1971 Dodge Charger, designed to meet your needs without breaking the bank.
From
Exhaust Muffler
replacements to
Exhaust Fittings
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Exhaust Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Exhaust Parts for your 1971 Dodge Charger at great prices.
Our Exhaust Parts inventory for this model
ranges from just $2.29 to $1,467.00, with
an average price of $224.39.
Our 41 Exhaust Parts in stock come from 11 trusted brands, so you’re sure to find the right part for your 1971 Dodge Charger without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1971 Dodge Charger, we stock popular OEM and aftermarket Exhaust Parts from top names
like FELPRO, Walker, Flowmaster Inc., and more.
FELPRO Exhaust Parts
start at just $2.29 and boast an impressive 5 stars average rating from customers.
Walker and Flowmaster Inc. also bring quality to the table, with Exhaust Parts available starting at $2.79, and at an average 4 stars rating.
With 979 customer reviews and counting, our 1971 Dodge Charger Exhaust Parts have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Exhaust Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 1971 Dodge Charger is always ready to roll. We’re committed to providing you with everything you need to keep your Charger in top shape, all in one place.
Start shopping confidently below for your 1971 Dodge Charger!
Best-Selling Exhaust Mufflers for 1971 Dodge Chargers
Enhance the driving experience in your Dodge with 6 quality Exhaust Muffler components, starting at $64.99.
Walker – SoundFX Muffler, Direct Replacement, No Fabrication Needed (Part No.18230)
from
$95.99
Featuring 100% aluminized steel for longer service life compared to low-carbon steel, Walker SoundFX direct-fit mufflers deliver quality appearance and favorable acoustics while mechanical interior joints and spun-locked heads provide durability.
Product Features:
See More
Product Features:
- RESISTS CORROSION — Aluminized steel construction and internal drainage system helps reduce corrosion
- BUILT TO LAST — Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
- EASY TO INSTALL — Direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation that doesn’t require specialized fabrication and/or welding
- FACTORY SOUND — Louvered tubes help reduce radiated noise for factory-style sound quality compared to straight perforated tubes
- GET MORE MILES FROM YOUR MUFFLER — Designed and tested to extend muffler life
Flowmaster Inc. – Super 44 Series Muffler, 2.25in Offset Inlet 2.25in Center Outlet, Non-Reversible, Aggressive Sound (Part No.842446)
from
$126.99
Flowmaster’s Super 44 muffler uses the same Delta Flow technology found in our larger Super 40 mufflers. The Super 44 delivers a rich powerful tone and are the most aggressive, highest performing street muffler we’ve ever built in a four inch case. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.
See More
Walker – Sound Solution Muffler (Part No.18692)
from
$64.99
Sound Solution mufflers are engineered with 100% aluminized steel for longer service life compared to low carbon steel. These mufflers have mechanical interior joints for durability, And spun-locked heads for resistance to rupture from backfires. Sound Solution mufflers are available in a universal fitment style, with both quality appearance And favorable acoustics.
See More
Flowmaster Inc. – 40 Series Muffler, 2.25in Offset Inlet 2.25in Center Outlet, Non-Reversible, Aggressive Sound (Part No.42441)
from
$99.99
The Original 40 series muffler delivers an aggressive exterior and interior tone. If you’re looking for that original Flowmaster sound this is the muffler is for you. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More
Walker – SoundFX Universal Exhaust Muffler 2.5" Inlet (ID) 2.25" Outlet (ID) (Part No.18113)
from
$90.99
Featuring 100% aluminized steel for longer service life compared to low-carbon steel, Walker SoundFX universal mufflers deliver quality appearance and favorable acoustics while mechanical interior joints and spun-locked heads provide durability.
Product Features:
See More
Product Features:
- RESISTS CORROSION — Aluminized steel construction and internal drainage system helps reduce corrosion
- BUILT TO LAST — Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
- FLEXIBLE SOLUTION — Customizable design features expandable bushings for easy fitment and may require specialized fabrication and/or welding for installation
- FACTORY SOUND — Louvered tubes help reduce radiated noise for factory-style sound quality compared to straight perforated tubes
- GET MORE MILES FROM YOUR MUFFLER — Designed and tested to extend muffler life
Flowmaster Inc. – Super 40 Muffler – 2.25 Offset In / 2.25 Center Out – Aggressive Sound (Part No.952446)
from
$133.99
The Super 40 features Flowmaster’s Delta Flow technology. It’s larger case profile provides the best of both worlds of performance and sound. The Super 40 has that deep powerful sound of the Original 40 series but with all the benefits of performance and low interior resonance from the Delta Flow technology. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More
Most Popular 1971 Dodge Charger Exhaust Fittings
Customize your Dodge with 1 Exhaust Fittings products
like Exhaust Clamps, all
priced under $2.79.
Walker – Exhaust Clamp (Part No.35344)
from
$2.79
Complete your exhaust repair with an Exhaust Mate U-bolt clamp. Designed to ensure a tight, leak-resistant connection, Exhaust Mate hardware is manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- CONNECTS EXHAUST PARTS — Provides secure, leak-resistant connection
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS?–?Made from quality material for durability and long life
- BETTER TOGETHER — Use Walker accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade
Top Picks for 1971 Dodge Charger Exhaust Pipes
Upgrade Dodge Chargers with top-quality Exhaust Pipes parts, including 8 OEM and aftermarket selections for your 1971 model.
Flowmaster Inc. – Prebent Tailpipes – 2.50 in. Rear Exit – Pair (Part No.15806)
from
$226.99
Prebent pipe kits. Flowmaster’s 16 gauge mandrel bent pipe kits are designed to fit perfectly onto your vehicle with all the quality and performance that you would expect from Flowmaster.
See More
Walker – 2 Bolt Exhaust Pipe Flange Gasket: Metal, Heat Resistant, Premium Materials (Part No.31307)
from
$5.49
Complete your exhaust repair with Walker gaskets and flanges. Available in a variety of styles and sizes, they¿re designed to work with OE exhaust components and Walker aftermarket replacement parts.
Product Features:
See More
Product Features:
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
- HEAT RESISTANT — Designed to resist heat for long-lasting performance
- PREMIUM MATERIALS — Made from high-quality materials for durability and long life
- ENGINEERING EXPERTISE — Parts are reviewed and validated and approved by Walker engineers through rigorous research and development
- REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
- EASIER TO INSTALL — Featuring slotted bolt holes (where applicable) for easy installation, gasket slips into place
- BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
Felpro – Exhaust Pipe Flange Gasket (Part No.9547)
from
$2.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Felpro – Exhaust Pipe Flange Gasket (Part No.60025)
from
$3.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Felpro – Exhaust Pipe Flange Gasket (Part No.60146)
from
$2.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Felpro – Exhaust Pipe Flange Gasket (Part No.60016)
from
$3.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
MagnaFlow – Performance Exhaust Manifold Down Pipe (Part No.19343)
from
$294.99
Upgraded front pipes for optimized performance.
Product Features:
See More
Product Features:
- Unrestricted flow
- CNC precision robotic manufacturing techniques
- Durable corrosion-resistant stainless steel construction
MagnaFlow – Performance Exhaust Manifold Down Pipe (Part No.19304)
from
$245.99
Upgraded front pipes for optimized performance.
Product Features:
See More
Product Features:
- Unrestricted flow
- CNC precision robotic manufacturing techniques
- Durable corrosion-resistant stainless steel construction
In-Demand Exhaust Manifold and Headers for 1971 Dodge Chargers
Select from 8 premium Exhaust Manifold and Headers parts for your 1971 Dodge Charger, with prices ranging from $47.99 to $1,467.00.
Dorman – Direct Fit Exhaust Manifold: Without Heat Shield (Part No.674-232)
from
$468.99
This exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the original manifold on specified vehicles. It includes all necessary gaskets and downpipe hardware for a complete repair.
Product Features:
See More
Product Features:
- Ideal replacement – this exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the stock manifold on specified vehicles.
- Reliable construction – durable materials resist warping, cracking and leaking for long-lasting performance.
- Complete repair – includes all necessary gaskets and downpipe hardware
- Trustworthy design – built by industry leader in aftermarket manifolds
Flowtech – Ceramic Header (Part No.33130FLT)
from
$615.99Product Features:
- Fuel Economy From The Engine
- Leak Test For Max Performance
- Ceramic Headers
- Rust And Corrosion Resistance
- Mandrel-Formed Power Plenum
- Leakproof O-Ringed Port Seals
- Include All Mounting Hardware
Mr. Gasket – Exhsthdrbolt (Part No.2230G)
from
$47.99
Headlock&trade: Bolts eliminate the need for lock washers, Period. That’s because each Headlock&trade: Bolt features 24 equally-spaced, stainless steel teeth serrations that bite into and hold onto the attaching surface-eliminating the need for lock-washers.
Product Features:
See More
Product Features:
- 12 per Package
- Includes a ball-head/hex-key socket-installation tool that makes it easy to get them started
- 410 stainless steel
- Minimum 180,000 PSI tensile strength
- 24 equally spaced clockwise teeth
Flowtech – Standard Header (Part No.13130FLT)
from
$324.99Product Features:
- Fuel Economy From The Engine
- Leak Test For Max Performance
- Mandrel-Formed Power Plenum
- Leakproof O-Ringed Port Seals
- Include All Mounting Hardware
Hooker Headers – Super Comp. Header (Part No.5210-1HKR)
from
$1467.00
Hooker has a complete line of engine swap headers, front frame mounts and transmission mounts for popular engine swaps. Available for Chevy, Chrysler and Ford small block and big block engines. Hooker swap headers and mounts are designed to provide an exact fit when used together. Hooker swap headers add the extra horsepower and torque the serious enthusiast demands. Hooker Headers are the best single improvement you can make.
Product Features:
See More
Product Features:
- Long Tube Lengths
- Long Transition Collectors
- Monstrous Low-Mid Range Torque
- Keep Top End Horsepower
- Provides Finest Fit
- Most Durable Design Available
Hooker Headers – Competition Header (Part No.5903-3HKR)
from
$904.99
Competition Header
Hooker Headers – LS1 Engine Swap Headers for 66-72 Chevelle, El Camino (Part No.5903-1HKR)
from
$753.99
LS1 full length engine swap header fits 66-72 Chevelle, El Camino, Monte Carlo and Sprint applications. Hooker has a complete line of engine swap headers, front frame mounts and transmission mounts for popular engine swaps. Available for Chevy, Chrysler and Ford small block and big block engines. Hooker swap headers and mounts are designed to provide an exact fit when used together. Hooker swap headers add the extra horsepower and torque the serious enthusiast demands. Hooker Headers are the best single improvement you can make.
Product Features:
See More
Product Features:
- High Performance
- Affordable
- Durable 16 Gauge Material
- Welds Easier
- Lasts Longer
- Heat Cured
- High Heat Resistant
Hooker Headers – Competition Header (Part No.5903HKR)
from
$418.99
LS1 full length engine swap header fits 66-72 Chevelle, El Camino, Monte Carlo and Sprint applications. Hooker has a complete line of engine swap headers, front frame mounts and transmission mounts for popular engine swaps. Available for Chevy, Chrysler and Ford small block and big block engines. Hooker swap headers and mounts are designed to provide an exact fit when used together. Hooker swap headers add the extra horsepower and torque the serious enthusiast demands. Hooker Headers are the best single improvement you can make.
Product Features:
See More
Product Features:
- High Performance
- Affordable
- Durable 16 Gauge Material
- Welds Easier
- Lasts Longer
- Heat Cured
- High Heat Resistant
Most Sold 1971 Dodge Charger Catalytic Converters
Explore our best-selling Dodge parts for the 1971 Charger among 1 OEM and aftermarket options starting from $3.29.
Walker – Exhaust Pipe Flange Gasket (Part No.31311)
from
$3.29
Complete your exhaust repair with Walker gaskets and flanges. Available in a variety of styles and sizes, they¿re designed to work with OE exhaust components and Walker aftermarket replacement parts.
Product Features:
See More
Product Features:
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
- HEAT RESISTANT — Designed to resist heat for long-lasting performance
- PREMIUM MATERIALS — Made from high-quality materials for durability and long life
- ENGINEERING EXPERTISE — Parts are reviewed and validated and approved by Walker engineers through rigorous research and development
- REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
- EASIER TO INSTALL — Featuring slotted bolt holes (where applicable) for easy installation, gasket slips into place
- BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
Top-Rated Exhaust Parts Brands For Your 1971 Dodge Charger
Shop for the best-rated brands offering Exhaust Parts and other products for your 1971 Dodge Chargers. Below you’ll find some of our best rated Exhaust Parts from FELPRO, Walker, and Flowmaster Inc., and more. Exhaust Parts from these brands that fit a 1971 Charger start at just $2.29 and are rated as high as 5 stars. OEM and aftermarket Exhaust Parts don’t get more top quality, durable, and affordable than from the brands below.
Popular FELPRO 1971 Dodge Charger Exhaust Parts
When it comes to maintaining or upgrading your 1971 Dodge Charger, using quality Exhaust Parts is essential to ensure durability and a perfect fit. FELPRO ticks all of those boxes. We offer a wide selection of FELPRO Exhaust Parts, specifically designed for the 1971 Dodge Charger. With over 8 FELPRO brand Exhaust Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $2.29, with an average price of just $11.64. Plus, with over 1 customer reviews and an average rating of 5 stars, you can trust that our FELPRO Exhaust Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
Popular Walker 1971 Dodge Charger Exhaust Parts
Walker auto parts is one of the highest quality Exhaust Part brands in the market. Any 1971 Dodge Charger owner should feel confident when installing genuine Walker parts in their vehicle. To ensure the best fit and performance for your 1971 Charger, Advance Auto Parts carries a full inventory of 6 Walker Exhaust Parts. Plus you will be keeping your Dodge in peak condition while saving money because prices on these Walker Exhaust Parts range from $2.79 to $95.99, plus, with more than 33 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Exhaust Parts below will deliver on both quality and value.
from
$90.99
$90.99
This product is not rated
SoundFX Universal Exhaust Muffler 2.5" Inlet (ID) 2.25" Outlet (ID)
“”
FAQs for 1971 Dodge Charger Exhaust Parts
Which Exhaust Parts are best-sellers for 1971 Dodge Chargers?
Out of 41 Exhaust Parts that fit 1971 Dodge Chargers, the following parts are the top sellers:
- Exhaust Pipe Flange Gasket (5185130) – $2.29
- Terminator; Exhaust Tips (19310030) – $85.99
- 40 Series Muffler, 2.25in Offset Inlet 2.25in Center Outlet, Non-Reversible, Aggressive Sound (16120040) – $99.99
What’s the price range for 1971 Dodge Charger Exhaust Parts?
Exhaust Part prices for the 1971 Dodge Charger start at $2.29 and go up to $1,467.00 for the most premium parts.
What’s the average price of a Exhaust Part for a 1971 Dodge Charger?
The average price for Exhaust Parts for the 1971 Dodge Charger is $224.39. Keep in mind the variety of part types within our Exhaust Part category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Exhaust Parts for other Dodge Charger model years?
What are the cheapest Exhaust Parts for my 1971 Dodge Charger?
The cheapest 1971 Dodge Charger Exhaust Parts we carry in stock are:
- Exhaust Pipe Flange Gasket (5185130) – $2.29
- Exhaust Pipe Flange Gasket (5185467) – $2.49
- Exhaust Clamp (11012140) – $2.79
- Exhaust Pipe Flange Gasket (5601037) – $3.29
- Exhaust Pipe Flange Gasket (5185424) – $3.29
What are the top-rated Exhaust Parts that fit the 1971 Dodge Charger?
Out of 979 reviews by customers, our 1971 Dodge Charger Exhaust Parts have an average customer rating of . These are some of the highest-rated Exhaust Part types for the 1971 Dodge Charger and their top-rated products:
- Exhaust Gaskets
- Seal-4-Good Header Flange Gasket (10556889) – $48.99
- Exhaust Manifold Gasket Set (5184630) – $22.99
- Ultra Seal: Exhaust Gasket Set (10648826) – $37.69
- Exhaust Tips
- Seal-4-Good Header Flange Gasket (10556889) – $48.99
- Exhaust Manifold Gasket Set (5184630) – $22.99
- Ultra Seal: Exhaust Gasket Set (10648826) – $37.69
What types of Exhaust Parts do you sell for my 1971 Dodge Charger?
As of 2/5/25, these are some of the most in-demand types of Exhaust Parts for a 1971 Dodge Charger:
Can I get help with 1971 Dodge Charger Exhaust Part orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Dodge Exhaust Parts and more.
What is your return policy for Dodge Charger Exhaust Parts?
Advance Auto Parts keeps returns simple. For new Dodge Charger Exhaust Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
