1970 Pontiac Catalina Body Parts

Essential 1970 Pontiac Catalina Body Parts

Carquest Premium – Door Jamb Switch (Part No.SBA4439)

Door Jamb Switch

from

$6.79
The main device in any electrical circuit is a switch. In an electrical circuit a device is required to turn a component on or off when commanded by the operator, within the switch are contacts that will complete the electrical path to the load, or driven device. The operation of a switch may be manual from a person or could be electrical from some sort of controller or computer.

Product Features:
  • Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
  • 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
  • 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
  • Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
  • Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
  • Where applicable electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
See More

KAI – Crank Handle C-Clip (Part No.GMKHWB2404)

Crank Handle C-Clip

from

$13.99
New Goodmark Box Of 100 Horsesh Type Door And Window Crank Handle Clips

Product Features:
  • Made Of Die Cast
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – A-Pillar Trim Plug (Part No.GMK4010453621S)

A-Pillar Trim Plug

from

$16.99
New Goodmark 12 Piece Trim Panel Mounting Plug Set

Product Features:
  • 12 Piece
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Metro Mould – Convertible Top Seal (Part No.RR 1814)

Convertible Top Seal

from

$392.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s Convertible Top Seals all have that show winning look and fit. Our Convertible Top Seals all incorporate steel cores and studs for a perfect fit. Convertible Top Roof Rail Kit. 5-Piece set includes all right and left side top rail seals and the windshield top header seal.

Product Features:
  • Jet black to match the color of the original part
  • Dense material to match the original
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

KAI – Rear View Mirror (Part No.GMK4032935691)

Rear View Mirror

from

$69.99
New Goodmark 12 Inch Inside Rearview Mirror Without Map Light

Product Features:
  • Made Of Die Cast
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Metro Mould – ROOF RAIL SEAL (Part No.RR 5007-E)

ROOF RAIL SEAL

from

$197.99
ROOF RAIL SEAL

Dorman – Help – Door Striker Bolt Kit – 7/16 In.-14 (Part No.38428)

Door Striker Bolt Kit - 7/16 In.-14

from

$11.99
This door lock striker is designed to match the fit and function of the original striker on specified vehicles, and is engineered for durability and reliable performance.

Product Features:
  • Direct replacement – this door lock striker is designed to match the fit and function of the original striker on specified vehicles
  • Restores functionality – reliable replacement for an original part that has failed due to collision damage or fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

KAI – Interior Door Handle (Part No.GMK414344168)

Interior Door Handle

from

$9.99
New Goodmark Driver Or Passenger Side Inside Door Handle

Product Features:
  • Made Of Die Cast
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Metro Mould – Deck Lid Stop Buffer (Part No.SB 34)

Deck Lid Stop Buffer

from

$28.49
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Trunk Bumper. Fits lower corner on deck lid. 15/16 In. O.D. 11/16 In. high. Each.

Product Features:
  • Jet black to match the color of the original part
  • Dense rubber to match the original
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

Needa Parts – Door Hinge Bushings – .345 In. Id X .420 In. Od X .305 In. Height (Part No.38375)

Door Hinge Bushings - .345 In. Id X .420 In. Od X .305 In. Height

from

$1.79
This door hinge bushing is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this door hinge bushing matches the fit and function of the factory part on specified years, makes and models
  • Ideal solution – this bushing is a reliable replacement for an original part that has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Metro Mould – Door Seal (Part No.LM 16-G/S)

Door Seal

from

$110.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Ready-to-install Door Weatherstripping that comes with correct tool-installed clips and pins plus molded ends that are truly softer than other available reproductions. All are made of the finest weather resistant and ozone resistant sponge. Rear Molded Door Seals. For 4-door sedan only, with RWD. Each. is 129 In. long. Pair. R&L.

Product Features:
  • Jet black to match the color of the original part
  • There’s no need to slam when you use Metro SUPERsoft weatherstripping products
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

Metro Mould – Fuel Door Rubber Stop (Part No.SB 81)

Fuel Door Rubber Stop

from

$8.79
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Fuel Door Bumper. 7/8 In. high, 5/16 In. O.D. Each.

Product Features:
  • Jet black to match the color of the original part
  • Dense rubber to match the original
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

KAI – Hood Insulation Clip (Part No.GMKHWB2401)

Hood Insulation Clip

from

$10.99
New Goodmark Box Of 25 Hood Pad Clips, Replaces Gm 3977775, 2 Inch Diameter

Product Features:
  • 2 Inch Diameter
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Metro Mould – Quarter Glass Seal (Part No.VS 3-M)

Quarter Glass Seal

from

$63.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s Quarter Glass Seals are the highest quality reproductions available. With molded curves and a non-wrinkling lip design. Other brands do not compare. Rear Roll-Up Quarter Window Seals, for 2-Door Hardtops and Convertibles. Made with a steel core stiffener. 16-1/2 In. long. Pair.

Product Features:
  • Jet black to match the color of the original part
  • Dense rubber to match the original
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

Needa Parts – Door Hinge Pin And Bushing Kit – 1 Pin, 2 Bushings And 1 Clip (Part No.38391)

Door Hinge Pin And Bushing Kit - 1 Pin, 2 Bushings And 1 Clip

from

$9.49
This door hinge pin & bushing kit is designed to match the original parts required to restore door alignment and function on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this door hinge pin & bushing kit is designed to match the original pin and bushing required to restore the alignment and proper function of a door on specified vehicles
  • Ideal solution – this pin and bushing are reliable replacements for original components that have failed due to wear
  • Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

KAI – Quarter Window Frame (Part No.GMK403266569P)

Quarter Window Frame

from

$169.99
New Goodmark Driver And Passenger Side Pair Of Quarter Glass Chrome Trims With Glass Mount Inserts

Product Features:
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Fastener (Part No.GMKHWB2405)

Fastener

from

$12.99
Product Features:
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

AmeriSeal – Flexible Flocked Lining All-Rubber Window Glass Run Channel 72" Length (Part No.10868)

Flexible Flocked Lining All-Rubber Window Glass Run Channel 72" Length

from

$16.99
This Ameriseal 72″ Flexible Flocked Lining All-Rubber Window Glass Run Channel 72″ Length For Application- 1965-1975 GM Mid size car is the ideal solution for all your car leakage problems. This window glass run channel is perfectly compatible with the 1979-1993 Ford Mustang Coupe model. It features a strong adhesive to keep your car completely protected from dust and water. It is an ideal solution for your old or worn-out counterpart.

Product Features:
  • Flexible model
  • Easy installation allows for user-friendly operability
  • Durably designed for longevity
  • Allows you to keep dust and water away from your car
  • Highly dense rubber body built
See More

AutoCraft – Exterior Door Handle (Part No.77022)

Exterior Door Handle

from

$29.99
Want a new exterior door handle that matches the original, for far less than going back to the dealership? This replacement door handle was engineered to match the fit and appearance of the stock handle on specific vehicle years, makes and models.

Product Features:
  • Matching appearance – this replacement exterior door handle was specifically designed to look and function the same as the original handle on particular vehicles
  • Seamless replacement – designed to match the dimensions and specifications of the handle that came stock on the vehicle
  • Excellent value – original equipment quality at a lower price
  • Ensure fit – this handle is vehicle position specific, so double check you have the correct handle for the same position and side of the vehicle you want to replace
See More

KAI – Window Crank Handle (Part No.GMK414342169)

Window Crank Handle

from

$10.99
New Goodmark Window Crank Handle With Black Knob, Standard Quality

Product Features:
  • Standard Quality
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Handle Hardware Kit (Part No.GMK4021440701S)

Handle Hardware Kit

from

$8.99
New Goodmark 4 Piece Outer Door Handle Nut Kit, For 2 Door Handles

Product Features:
  • For 2 Door Handles
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Metro Mould – Door Lock Assembly (Part No.UM 1600-100)

Door Lock Assembly

from

$4.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Unbeaded Door and Trunk Lock Gasket. 1-3/16 In. O.D. 7/8 In. I.D. Each.

Product Features:
  • Jet black to match the color of the original part
  • Flat Gasket
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

KAI – Door Lock Striker (Part No.GMK403060664)

Door Lock Striker

from

$18.99
New Goodmark Door Lock Striker, Allen Head Bolt With Collar

Product Features:
  • Allen Head Bolt With Collar
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Dorman – Help – Door Hinge Pin And Bushing Kit – 1 Pins And 4 Bushings (Part No.38400)

Door Hinge Pin And Bushing Kit - 1 Pins And 4 Bushings

from

$8.49
This door hinge pin & bushing kit is designed to match the original parts required to restore door alignment and function on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this door hinge pin & bushing kit is designed to match the original pin and bushing required to restore the alignment and proper function of a door on specified vehicles
  • Ideal solution – this pin and bushing are reliable replacements for original components that have failed due to wear
  • Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Metro Mould – Moulding Clip (Part No.WF 205)

Moulding Clip

from

$3.49
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Quarter Window Reveal Molding Clip. Made of Steel. 1-3/8 In. X 11/16 In. Each.

Product Features:
  • Jet black to match the color of the original part
  • Dense material to match the original
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

Carquest Premium – Trunk Lock (Part No.TLC1005)

Trunk Lock

from

$12.49
All modern vehicles consist of several independent operating systems controlled by a main system processor with independent sub-processors. The sub-processors provide class 2 serial information data to the main processor while handling the operation of the system and carry the circuit load to protect the main operating system. When replacing any level processor programming may be needed to enter the unit into the vehicles main operating system.

Product Features:
  • Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
See More

Metro Mould – Door Window Seal (Part No.ALP 5053)

Door Window Seal

from

$29.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Ready-to-install Door Weatherstripping that comes with correct tool-installed clips and pins plus molded ends that are truly softer than other available reproductions. All are made of the finest weather resistant and ozone resistant sponge. Upper Door Lock Pillar Seal. Made with all details and steel cores. 2-3/16 In. W X 4-11/16 In. L. Pair. R&L.

Product Features:
  • Jet black to match the color of the original part
  • Dense material to match the original
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

Metro Mould – Hardtop Moulding (Part No.RR 5014)

Hardtop Moulding

from

$94.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro makes a huge line of Roof Rail Seals that all have that show winning look and fit. Our Roof Rail Seals have a perfect fit. Molded Roof Rail Seals, for 2-Door Hardtop. Pair. R&L.

Product Features:
  • Jet black to match the color of the original part
  • There’s no need to slam when you use Metro SUPERsoft weatherstripping products
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

1970 Pontiac Catalina Body Parts

You count on your 1970 Pontiac Catalina to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Body Parts. With 44 Body Parts ranging in price from $1.79 to $246.99, you’re sure to find everything you need for your 1970 Pontiac Catalina.

Brands matter. If you want to shop a specific Body Parts brand, we stock 11 different brands like Dorman, Carquest, and LOCKSmart. 1970 Pontiac Catalina Body Parts start as low as $1.79!

One of the best ways to find top quality OEM or aftermarket Body Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 1,070 extensive product reviews on 1970 Pontiac Catalina Body Parts. Some of the top-rated Body Parts products we carry are Quarter Glass Seal with 3.0 stars.

Did we mention you can order your Body Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Body Parts inventory for your 1970 Pontiac Catalina below to get started!

Top-Rated Body Parts Brands For Your 1970 Pontiac Catalina

Trusted Body Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1970 Pontiac Catalina running right for years to come. In our inventory you’ll find brands like Dorman, Carquest, LOCKSmart, and even more.

Popular Locksmart Body Parts

You’ll find popular Locksmart brand products across Vehicle Doors. All are waiting to get your 1970 Pontiac Catalina back on the road. Some of the top-rated Locksmart products in these categories are:
Door Lock Kit
from $24.29
(4)
Door Lock Kit
Door Lock Kits

FAQs for 1970 Pontiac Catalina Body Parts

What are the most purchased Body Parts for the 1970 Pontiac Catalina?

Out of 44 Body Parts for the 1970 Pontiac Catalina, the most popular in our inventory are:
Door Jamb Switch
from $11.99
(4)
Door Jamb Switch
Door Jamb Switches
Window Handle
from $9.79
(4)
Window Handle
Window Handles
Door Hinge
from $33.99
This product is not rated
Door Hinge
Door Hinge Pin Kits

What are the top-rated 1970 Pontiac Catalina Body Parts?

Top-rated Body Parts for your 1970 Pontiac Catalina based on customer reviews/ratings are:
Quarter Glass Seal
from $63.99
(1)
Quarter Glass Seal
“I understood as the description stated it was metal stiffened — no it was not from side to side — only where it mounts.”