1970 Mercury Cougar Suspension Parts

Name: Gas-Matic Passenger Car Shock Absorber
Brand: Monroe
SKU: 55847
Price: 39.99 USD
Rating: 1.0 (1 reviews)

Below you will find various in-demand Mercury Suspension Parts, components and accessories for your 1970 Cougar. Advance Auto Parts has popular Cougar parts like Coil and Leaf Springs, Shocks and Struts, Control Arms and more. You’ll also find aftermarket and OEM Suspension Parts for other Cougar model years including 1993, 1994, 1995, 1996, 1997, 1999, 2000, 2001, 2002 and more. Select a category of 1970 Mercury Cougar Suspension Parts below and start saving instantly.

Popular 1970 Mercury Cougar Suspension Parts Categories

Air Shock Installation Kits

Air Suspension Shocks

Rear Shock and Struts

Front Shock and Struts

Lower Control Arm Bushings

Control Arm Shaft Kits

Leaf Spring Bushings

Shackle Bushings

Coil Spring Seats

Leaf Spring and Shackle Bushing Kits

Essential Suspension Parts for 1970 Mercury Cougars

from

$39.99

Monroe® Gas-Matic passenger car shock absorber are gas charged and provide improved control at an economical price.

Product Features:

Available for import and domestic passenger cars
Gas-charged unit
Improved handling and control
Economical OE replacement
Meets OE product specifications

from

$60.99

Designed to restore a vehicle’s original factory drivability and performance, Monroe® OESpectrum® passenger car shock absorbers provide an exceptional level of handling precision and control while filtering out noise, vibration and harshness.

Product Features:

REDUCED NOISE, VIBRATION AND HARSHNESS — Twin Technology Active Control System delivers exceptional control under most driving conditions while isolating impact-related noise, vibration and harshness
EXCEPTIONAL HANDLING — Full displaced valving, tuned specifically to each vehicle, adjusts to road extremes while the larger bore provides more efficient damping control to provide consistency and a smooth ride
CONTROL AND DURABILITY — Fluon-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
CONSISTENT RIDE — OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
IMPROVES PERFORMANCE — Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
Nitrogen Gas Charged: For improved ride and handling, helps maintain tire to road contact by reducing aeration – on most applications
1/2 inch Diameter Piston Rod: Nitrocarburized rod for long service life. On non-dust shield units only.
Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.

from

$99.19

Drag Shock-90/10:Ford/GM/Mopar

from

$129.92

Strut Assembly

from

$76.99

Whiteline’s design is incorporated with a robust housing and a grease free pivot pin has revolutionized this component.

Product Features:

Protective E-Coat coating acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
PTFE lining provides an extraordinary low coefficient of friction eliminating the need to lubricate the bushing.
Specially bonded design for optimised strength typically required in high load bearing applications.

from

$18.99

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

Easy to install
Restores like-new steering and handling
Engineered to provide long life and dependability
Construction and design validated by MOOG engineers
Incorporates proven design and engineering features

from

$99.99

Ideal for hauling, Monroe Max-Air shock absorbers can be inflated or deflated up to 150 PSI to maintain level height with additional weight up to 1,200 lbs. (Capacity is limited by vehicle suspension, tires and transmission. See vehicle owner’s manual.)

Product Features:

MAINTAIN RIDE HEIGHT UNDER LOAD — Air chamber can be inflated or deflated up to 150 PSI to maintain level height with additional weight up to 1,200 lbs. (capacity is limited by suspension, tires and transmission; see owner’s manual)
EASY TO ADJUST — Special air fitting resists air leakage and ties into factory system (where applicable) or manually inflates with an air compressor; pair with Monroe air shock accessory and shock air hose AK kits (varies by application)
EXCEPTIONAL HANDLING — Full-displaced valving on compression and extension cycles for a smooth ride
BUILT TO LAST — Hardened and precision ground piston rod for consistent performance, sintered iron piston for enhanced durability and longer service life and lubricated air sleeve reduces friction for smooth operation
CONSISTENT RIDE — OE all-weather fluid contains special modifiers to handle extreme temperatures and help reduce friction and ensure smooth rod reaction
Sintered Iron Piston: Stronger than traditional metals, enhances durability for longer service life.
Special Air Fitting: Resists air leakage.

from

$101.99

MAINTAIN RIDE HEIGHT UNDER LOAD — Air chamber can be inflated or deflated up to 150 PSI to maintain level height with additional weight up to 1,200 lbs. (capacity is limited by suspension, tires and transmission; see owner’s manual)
EASY TO ADJUST — Special air fitting resists air leakage and ties into factory system (where applicable) or manually inflates with an air compressor; pair with Monroe air shock accessory and shock air hose AK kits (varies by application)
EXCEPTIONAL HANDLING — Full-displaced valving on compression and extension cycles for a smooth ride
BUILT TO LAST — Hardened and precision ground piston rod for consistent performance, sintered iron piston for enhanced durability and longer service life and lubricated air sleeve reduces friction for smooth operation
CONSISTENT RIDE — OE all-weather fluid contains special modifiers to handle extreme temperatures and help reduce friction and ensure smooth rod reaction
Sintered Iron Piston: Stronger than traditional metals, enhances durability for longer service life.
Special Air Fitting: Resists air leakage.

from

$36.49

Monroe® is one of the automotive industry’s best-known and most trusted original equipment and aftermarket brands, having delivered innovative undercar solutions to leading global OE manufacturers and generations of professional technicians and vehicle owners. This heritage of leading-edge products and exceptional customer support has made Monroe® shocks, struts and other ride control components a preferred choice of automotive professionals worldwide.

from

$25.99

from

$23.99

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:

Restores vehicle handling
Reduces road noise
Reduces vibration
UV resistant

from

$79.99

Helps reduces tire wear
Smoother ride
Supplied in matched sets
Coated to resist corrosion

from

$36.99

New Goodmark Coil Spring Seat And Bushing, 2 Required

Product Features:

2 Required
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$133.99

Improves steering response
Complete kit for 1 arm
Heat treated steel bushings OR torsional rubber bushings
Reduces vibration

from

$133.99

Rare Parts prides itself in only manufacturing high quality chassis parts. Diamond Series parts will exceed OEM and aftermarket products. Examples would be: forged verses stamped housings, greaseable, tighter machining tolerances, and proper heat treat of ball studs and mating components. Every Diamond Series part is tested and inspected in our facility prior to being sold. So rest assured you are getting a quality part when quality counts.

Product Features:

Heat Treated thread and bushing
Torsional rubber bushings
Precision thread tolerances
Greaseable

from

$146.99

Improves steering response
Complete kit for 1 arm
Heat treated steel bushings OR torsional rubber bushings
Reduces vibration

from

$61.99

Improves vehicle handling
Restores OE alignment
Improves steering geometry
Easy camber adjustment

from

$45.99

Rubber or Heat Treated bushings
No Squeak
Reduces vibration

from

$25.99

Backed by superior materials and rigorous testing, MOOG control arm bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
PREMIUM MATERIALS — Made from high-quality elastomer compounds for durability and ride performance
OE-STYLE DESIGN — Engineered to match or exceed OE requirements
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on

from

$62.99

For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.

Product Features:

Maintains Better Alignment While Driving
Full Floating and Non Binding
Fits Into the Remaining Stock Control Arms

from

$309.99

Reduces vibration
Torsional rubber bushings
UV resistant
No Squeak

from

$68.99

HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
PREMIUM MATERIALS — Made from high-quality elastomer compounds for durability and ride performance
OE-STYLE DESIGN — Engineered to match or exceed OE requirements
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
Bushings manufactured from high quality elastomer compounds for durability and ride performance
Assembled with proper precompression for ultimate in performance and feel

from

$20.99

This suspension control arm bushing is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment bushing on specific vehicles.
Reliable fit – precision-engineered to match the design and dimensions of original components.
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$29.99

Reduces vibration
Torsional rubber bushings
UV resistant
No Squeak

from

$95.99

Reduces vibration
Torsional rubber bushings
UV resistant
No Squeak

from

$27.99

Maintains Better Alignment While Driving
Full Floating and Non Binding
Fits Into the Remaining Stock Control Arms

from

$31.49

Reduces vibration
Torsional rubber bushings
UV resistant
No Squeak

from

$77.04

TRW sets the standard within the Aftermarket, with tests that go beyond the ordinary to ensure every chassis part we produce meets stringent vehicle manufacturer quality standards, in line with the Original Equipment specification. To help make sure that our parts can go the distance, TRW utilizes on the road tests and the most advanced test machines available, in both our Original Equipment and Aftermarket facilities as well as by independent testing labs. So you can be sure that TRW parts are tested for your safety. The TRW Control Arm Bushing Kit is a direct fit OEM replacement that contains the same high quality craftsmanship and materials as the original equipment they replace.

Product Features:

OE-Equivalent and a direct fit application.
Meets or exceeds the OE specifications.
Designed to reduce vibration and absorb noise.
Kit includes bushings and hardware – (SEE Note)
Acoustic measurements to ensure driver comfort
Strength tests for durability
Environmental resistance tests for all weather conditions
Wear and drive tests
Assembly technique testing of all critical safety features
Dynamic testing of complete units to ensure leak free performance

Upgrade your 1970 Mercury Cougar with Top-Quality Suspension Parts

When it comes to maintaining or upgrading your 1970 Mercury Cougar, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Mercury or enhancing its overall performance, Suspension Parts are key to keeping your Cougar functioning at its best. At Advance Auto Parts, we offer a wide selection of 19 Suspension Parts for the 1970 Mercury Cougar, designed to meet your needs without breaking the bank. From Coil and Leaf Spring replacements to Shocks and Struts upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Suspension Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Suspension Parts for your 1970 Mercury Cougar at great prices. Our Suspension Parts inventory for this model ranges from just $15.99 to $146.99, with an average price of $64.76. Our 19 Suspension Parts in stock come from 7 trusted brands, so you’re sure to find the right part for your 1970 Mercury Cougar without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1970 Mercury Cougar, we stock popular OEM and aftermarket Suspension Parts from top names like Monroe, and more. Monroe Suspension Parts start at just $25.99 and boast an impressive 4 stars average rating from customers. With 784 customer reviews and counting, our 1970 Mercury Cougar Suspension Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Suspension Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1970 Mercury Cougar is always ready to roll. We’re committed to providing you with everything you need to keep your Cougar in top shape, all in one place. Start shopping confidently below for your 1970 Mercury Cougar!

Best-Selling Coil and Leaf Springs for 1970 Mercury Cougars

Enhance the driving experience in your Mercury with 4 quality Coil and Leaf Spring components, starting at $36.99.

show more show less

from

$79.99

Helps reduces tire wear
Smoother ride
Supplied in matched sets
Coated to resist corrosion

from

$36.99

New Goodmark Coil Spring Seat And Bushing, 2 Required

Product Features:

2 Required
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$76.99

Whiteline’s design is incorporated with a robust housing and a grease free pivot pin has revolutionized this component.

Product Features:

Protective E-Coat coating acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
PTFE lining provides an extraordinary low coefficient of friction eliminating the need to lubricate the bushing.
Specially bonded design for optimised strength typically required in high load bearing applications.

from

$45.99

Rubber or Heat Treated bushings
No Squeak
Reduces vibration

Most Popular 1970 Mercury Cougar Shocks and Struts

Customize your Mercury with 8 Shocks and Struts products like Rear Shock and Struts, Front Shock and Struts, and Shackle Bushings, all priced under $104.99.

show more show less

from

$47.99

Monroe® Gas-Matic passenger car shock absorber are gas charged and provide improved control at an economical price.

Product Features:

Available for import and domestic passenger cars
Gas-charged unit
Improved handling and control
Economical OE replacement
Meets OE product specifications

from

$45.99

Monroe® Gas-Matic passenger car shock absorber are gas charged and provide improved control at an economical price.

Product Features:

Available for import and domestic passenger cars
Gas-charged unit
Improved handling and control
Economical OE replacement
Meets OE product specifications

from

$82.99

The KYB Gas-a-just monotube shock absorber has additional performance advantages over the traditional twin-tube design: It can instantly, automatically adjust to your performance needs and never experiences fade due to aeration. The KYB Gas-a-just has two separate working chambers: An air-free hydraulic piston and valve area for responsiveness and control, and a second high-pressure nitrogen gas area with a floating piston that provides a comfortable ride during normal driving and adds instant performance on demand.

Product Features:

Adds Up To 25% More Damping Performance Over Original Equipment Shocks
Components And Valving Designed Specifically For Your Vehicle
Gas-A-Just Monotubes Include Additional Damping Over One Design For Vehicles That Work, Tow, And Have Larger, Heavier Tires & Wheels
High Pressure Monotube Design Separates The Gas And Oil For Fade Free Operation And Instant Response
Fluid Leaking Can Be A Cause Of Shock Failure, The KYB Gas-A-Just Has An Ultra-Smooth Triple Chrome Plated Chrome Piston Rod To Reduce Seal Wear
The Higher Gas Pressure Of The KYB Gas-A-Just Responds Quickly To Improve Steering Response
Electronic Safety Systems Depend On The Suspension, Brakes And Tires Operating As The Vehicle Manufacturer Intended. The KYB Gas-A-Just Helps Keep Electronic Safety Systems Performing As Designed.

from

$44.99

Ride Comfort may be important, but restoring a vehicles Ride Control, stability, stopping, lane change responsiveness and handling is critical. KYB Excel-G Shocks and Struts are designed for the most important performance purpose: Restoring the vehicles original capabilities. KYB is a world leading supplier of shocks and struts to new vehicle manufacturers and the Excel-G is made on the very same KYB OE assembly lines, uses the same OE quality components and is calibrated to restore original, designed performance, not change it. That has earned Excel-G the classification: OEA (Original Equipment for the Aftermarket). The KYB Excel-G is a nitrogen gas-charged, twin-tube design that includes every quality component that our global OEM products include and it is the preferred choice by professional technicians.

Product Features:

KYB Recommended Orem Replacement Shock
The KYB Excel-G Helps Restore The Designed Control And Handling Of Your Vehicle
The KYB Excel-G Uses A Triple Lip Fluid Seal To Reduce The Chance Of Oil And Gas Leaking Out
Vehicle Specific, Hand Assembled, In-House Damping Valves Correctly Manage Tire Contact, Steering Response And Body Movement
Electronic Safety Systems Depend On The Suspension, Brakes And Tires Operating As The Vehicle Manufacturer Intended. The KYB Excel-G Helps Keep Electronic Safety Systems Performing As Designed.
KYB Has The Strongest And Thickest Strut Bodies And Brackets In The Industry; Minimizing Flex To Maintain Correct Alignment In All Conditions

from

$18.99

Easy to install
Restores like-new steering and handling
Engineered to provide long life and dependability
Construction and design validated by MOOG engineers
Incorporates proven design and engineering features

from

$104.99

The best all-round choice for vehicles with leaf or coil springs. Properly loads rear wheels to prevent over-reaction and wheel hop.

Product Features:

Excellent Weight Transfer
Lets Front End Down Quickly
Maximum Traction
Makes Vehicle Safer
Easier Control At End Of Track
Better Overall Stability

from

$81.73

The KYB Gas-a-Just shock absorber is engineered to significantly increase vehicle stability, handling and performance. The KYB Gas-a-Just shock absorber is a more responsive mono-tube design that automatically adjusts to driving conditions and is an ideal upgrade from an OE twin-tube design.

Product Features:

Direct fit application for ease of installation
Gas-a-Just is the replacement for an OE monotube shock
Ideal as an upgrade from an OE twin-tube
The more responsive monotube design automatically adjusts to driving conditions
Applications for cars, trucks, vans, and SUV’s

from

$78.81

Direct fit application for ease of installation
Gas-a-Just is the replacement for an OE monotube shock
Ideal as an upgrade from an OE twin-tube
The more responsive monotube design automatically adjusts to driving conditions
Applications for cars, trucks, vans, and SUV’s

Top Picks for 1970 Mercury Cougar Control Arms

Upgrade Mercury Cougars with top-quality Control Arms parts, including 4 OEM and aftermarket selections for your 1970 model.

show more show less

from

$61.99

Improves vehicle handling
Restores OE alignment
Improves steering geometry
Easy camber adjustment

from

$146.99

Improves steering response
Complete kit for 1 arm
Heat treated steel bushings OR torsional rubber bushings
Reduces vibration

from

$133.99

Heat Treated thread and bushing
Torsional rubber bushings
Precision thread tolerances
Greaseable

from

$15.99

Reduces vibration
Torsional rubber bushings
UV resistant
No Squeak

In-Demand Air Suspension and Kits for 1970 Mercury Cougars

Select from 3 premium Air Suspension and Kits parts for your 1970 Mercury Cougar, with prices ranging from $25.99 to $99.99.

show more show less

from

$99.99

MAINTAIN RIDE HEIGHT UNDER LOAD — Air chamber can be inflated or deflated up to 150 PSI to maintain level height with additional weight up to 1,200 lbs. (capacity is limited by suspension, tires and transmission; see owner’s manual)
EASY TO ADJUST — Special air fitting resists air leakage and ties into factory system (where applicable) or manually inflates with an air compressor; pair with Monroe air shock accessory and shock air hose AK kits (varies by application)
EXCEPTIONAL HANDLING — Full-displaced valving on compression and extension cycles for a smooth ride
BUILT TO LAST — Hardened and precision ground piston rod for consistent performance, sintered iron piston for enhanced durability and longer service life and lubricated air sleeve reduces friction for smooth operation
CONSISTENT RIDE — OE all-weather fluid contains special modifiers to handle extreme temperatures and help reduce friction and ensure smooth rod reaction
Sintered Iron Piston: Stronger than traditional metals, enhances durability for longer service life.
Special Air Fitting: Resists air leakage.

from

$36.49

from

$25.99

Top-Rated Suspension Parts Brands For Your 1970 Mercury Cougar

Shop for the best-rated brands offering Suspension Parts and other products for your 1970 Mercury Cougars. Below you’ll find some of our best rated Suspension Parts from Monroe, and more. Suspension Parts from these brands that fit a 1970 Cougar start at just $25.99 and are rated as high as 4 stars. OEM and aftermarket Suspension Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular Monroe 1970 Mercury Cougar Suspension Parts

When it comes to maintaining or upgrading your 1970 Mercury Cougar, using quality Suspension Parts is essential to ensure durability and a perfect fit. Monroe ticks all of those boxes. We offer a wide selection of Monroe Suspension Parts, specifically designed for the 1970 Mercury Cougar. With over 5 Monroe brand Suspension Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $25.99, with an average price of just $51.29. Plus, with over 28 customer reviews and an average rating of 4 stars, you can trust that our Monroe Suspension Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from
$99.99

(7)

Max-Air Air Adjustable Air Shock Absorber Pack of 2

“great shocks and buying online saves time and money”

from
$47.99

(7)

Gas-Matic Passenger Car Shock Absorber

“Great parts at a great price.”

from
$36.49

(3)

Monroe Shock Absorber Air Hose Kit

“great instructions easy to install”

FAQs for 1970 Mercury Cougar Suspension Parts

Which Suspension Parts are best-sellers for 1970 Mercury Cougars?

Out of 19 Suspension Parts that fit 1970 Mercury Cougars, the following parts are the top sellers:

High Pressure Monotube Gas Shock for Cars and Trucks (19170622) – $82.99
Gas Shock (19170369) – $44.99
Spring Perch (18511108) – $79.99

What’s the price range for 1970 Mercury Cougar Suspension Parts?

Suspension Part prices for the 1970 Mercury Cougar start at $15.99 and go up to $146.99 for the most premium parts.

What’s the average price of a Suspension Part for a 1970 Mercury Cougar?

The average price for Suspension Parts for the 1970 Mercury Cougar is $64.76. Keep in mind the variety of part types within our Suspension Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Suspension Parts for other Mercury Cougar model years?

Yes, we currently carry Suspension Parts for 34 model years of Mercury Cougars between 1967 and 2002. Suspension Parts are bought most frequently for the following model years: 2002, 2001, 2000, 1999, 1997, 1996, 1995, 1994, and 1993.

What are the cheapest Suspension Parts for my 1970 Mercury Cougar?

The cheapest 1970 Mercury Cougar Suspension Parts we carry in stock are:

Control Arm Bushing (20510482) – $15.99
Leaf Spring Shackle Bushing (20517262) – $18.99
Monroe Shock Absorber Air Hose Kit (5100002) – $25.99
Monroe Shock Absorber Air Hose Kit (5100001) – $36.49
Coil Spring Seat (11748917) – $36.99

What are the top-rated Suspension Parts that fit the 1970 Mercury Cougar?

Out of 784 reviews by customers, our 1970 Mercury Cougar Suspension Parts have an average customer rating of . These are some of the highest-rated Suspension Part types for the 1970 Mercury Cougar and their top-rated products:

Shocks and Struts
- Gas-Matic Passenger Car Shock Absorber (15930225) – $47.99
- Gas-Matic Passenger Car Shock Absorber (15930224) – $45.99

What types of Suspension Parts do you sell for my 1970 Mercury Cougar?

As of 2/5/25, these are some of the most in-demand types of Suspension Parts for a 1970 Mercury Cougar:

Can I get help with 1970 Mercury Cougar Suspension Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Mercury Suspension Parts and more.

What is your return policy for Mercury Cougar Suspension Parts?

Advance Auto Parts keeps returns simple. For new Mercury Cougar Suspension Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1970 Mercury Cougar Suspension Parts

Monroe – Gas-Matic Passenger Car Shock Absorber (Part No.55847)

Monroe – OESpectrum Passenger Car Shock Absorber (Part No.5847)

Lakewood – Drag Shock-90/10:Ford/GM/Mopar (Part No.40101)

Autopart International Inc – Strut Assembly (Part No.L3000652152API)

Whiteline – Spring Saddle (Part No.W71407G)

MOOG – Leaf Spring Shackle Bushing (Part No.K8785)

Monroe – Max-Air Air Adjustable Air Shock Absorber Pack of 2 (Part No.MA705)

Monroe – Max-Air Air Adjustable Air Shock Absorber Pack of 2 (Part No.MA805)

Monroe – Monroe Shock Absorber Air Hose Kit (Part No.AK18)

Monroe – Monroe Shock Absorber Air Hose Kit (Part No.AK64)

Rare Parts – Spring Seat (Part No.RP53171)

Rare Parts – Spring Perch (Part No.RP16152)

KAI – Coil Spring Seat (Part No.GMK3020972643S)

Rare Parts – Control Arm Shaft Kit (Part No.RP15668)

Rare Parts – Control Arm Shaft Kit (Part No.RP15348)

Rare Parts – Control Arm Shaft Kit (Part No.RP15117)

Rare Parts – Cam Bolt & Bushing Kit (Part No.RP15943)

Rare Parts – Shackle Bushing (Part No.RP35341)

MOOG – Control Arm Bushing Kit (Part No.K8135)

Energy Suspension – Control Arm Bushing Set (Part No.4.3123G)

Rare Parts – Control Arm Bushing (Part No.RP17092)

MOOG – Control Arm Bushing (Part No.K8588)

Dorman – Suspension Control Arm Bushing (Part No.533-929)

Rare Parts – Control Arm Bush (Part No.RP22088)

Rare Parts – Control Arm Bushing (Part No.RP19968)

Energy Suspension – Control Arm Bushing Set (Part No.4.3154R)

Rare Parts – Control Arm Bushing (Part No.RP17616)

TRW – Control Arm Bushing Kit (Part No.L2040453981TRW)

Rare Parts – Spring Perch (Part No.RP16152)

KAI – Coil Spring Seat (Part No.GMK3020972643S)

Whiteline – Spring Saddle (Part No.W71407G)

Rare Parts – Shackle Bushing (Part No.RP35341)

Monroe – Gas-Matic Passenger Car Shock Absorber (Part No.56001)

Monroe – Gas-Matic Passenger Car Shock Absorber (Part No.56000)

KYB – High Pressure Monotube Gas Shock for Cars and Trucks (Part No.KG5517)

KYB – Gas Shock (Part No.343219)

MOOG – Leaf Spring Shackle Bushing (Part No.K8785)

Lakewood – Drag Shock-70/30:Ford/GM/Mopar (Part No.40121)

KYB – Gas-a-Just Shock Absorber (Part No.L400011004KYX)

KYB – Gas-a-Just Shock Absorber (Part No.L400010934KYX)

Rare Parts – Cam Bolt & Bushing Kit (Part No.RP15943)

Rare Parts – Control Arm Shaft Kit (Part No.RP15117)

Rare Parts – Control Arm Shaft Kit (Part No.RP15348)

Rare Parts – Control Arm Bushing (Part No.RP15191)

Monroe – Max-Air Air Adjustable Air Shock Absorber Pack of 2 (Part No.MA705)

Monroe – Monroe Shock Absorber Air Hose Kit (Part No.AK18)

Monroe – Monroe Shock Absorber Air Hose Kit (Part No.AK64)