1970 International M1200 Performance and Racing Products
Find Your Specific 1970 International M1200 Performance and Racing Products
Below you will find various in-demand International Performance and Racing Products, components and accessories for your 1970 M1200. Advance Auto Parts has popular M1200 parts like Performance Engines, Performance Ignition Products, Performance Transmissions and more. You’ll also find aftermarket and OEM Performance and Racing Products for other M1200 model years including
1965,
1966,
1967,
1968,
1969,
1971,
1972 and more. Select a category of 1970 International M1200 Performance and Racing Products below and start saving instantly.
Popular 1970 International M1200 Performance and Racing Products Categories
Essential Performance and Racing Products for 1970 International M1200s
FAG US – CUP (Part No.LM48510)
from
$7.69
CUP
Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)
from
$186.99
Universal street and strip. For street-driven vehicles with breaker point ignition or OE electronic ignition. Delivers optimum performance when used with these Mallory ignition products: UNILITE (R) distributor with a HYFIRE (R) capacitive discharge ignition, magnetic breaker less distributor with a HYFIRE (R) capacitive discharge ignition, or dual point distributor. Effective to approximately 6500 RPM when used with a point type distributor (depending on engine combination). Effective to approximately 8000 RPM when used with a Mallory HYFIRE electronic ignition control (depending on engine combination).
Product Features:
See More
Product Features:
- Glass Filled Polyester Case
- Longer Spark Duration
- Increased Performance
- No Energy Loss Due To Arcing
- Includes Brass Contact Terminal
Edelbrock – Side-Mount Throttle Linkage for B/B Chevy #7075 Victor 2-R Manifold (Part No.7077)
from
$224.99
Product Features:
See More
- Steel Material
- Sideways Orientation
- Adjustable
- 2-Barrel Configuration
- Made In The USA
Edelbrock – Carb Adapter #2694 Mounts 4150 Holley Carb Sideways On Tunnel Ram 0.55 in-Pair (Part No.2694)
from
$82.99Product Features:
- Mounts Standard Flange Holley Carbs Sideways
- Use on Tunnel Rams
- 0.550 in. Thick
Edelbrock – Street Tunnel Ram Big Block Chevy 2-O Intake Manifold (Part No.7115)
from
$798.99
For 3500 to 7500 PRM. Use where low-end torque is not a prime factor. Great for engines with slightly modified heads. HEI ignition will not clear manifold. Street machines, street rods, pro-street and marine.
Product Features:
See More
Product Features:
- For 3500 to 7500 RPM
- Use Where Low-End Torque is Not a Prime Factor
- Great For Engines w/Slightly Modified Heads
- Top Has Vacuum Outlet for Power Brakes
- Will Accept Forward and Sideways Mounted Carbs
- Carburetor Center-to-Center Dimensions 9.38 in
- HEI Ignition Will Not Clear Manifold
- Street Machines; Street Rods; Pro-Street; Marine
Edelbrock – Victor Ram Intake Manifold #7079 Big-Block Chevy, Top Only (Part No.7079)
from
$125.99
Top intake for Victor Ram 2-R PN(7075). Available for two in line carburetors and two sideways mounted 4500 series carburetors. Carburetor center-to-center dimensions 9.38 inches.
Product Features:
See More
Product Features:
- Top Intake for Victor Ram 2-R PN[7075]
- For Two Sideways Mounted 4500 Series Carburetors
- Carburetor Center-to-Center Dimensions 9.38 in
- Includes Top Gasket PN[6989]
- Use Matching Throttle Linkage PN[7077]
Edelbrock – Intake Manifold replacement top gasket (Part No.6989)
from
$19.99
Replacement gasket for Edelbrock tunnel ram intake. Use with intake PN(7115). Base PN(7190). Top PN(7191). One gasket only.
Product Features:
See More
Product Features:
- Replacement Gasket for Edelbrock Tunnel Ram Intake
- Use w/Intake PN[7115]/Base PN[7190]/Top PN[7191]
- One Gasket Only
Edelbrock – Torker II 2-O Big Block Chevy Intake Manifold (Part No.5061)
from
$432.99
use Performer 2-O #2161.
Product Features:
See More
Product Features:
- 2500 to 6500 RPM High Performance Street Engines
- Single-Plane Low-Rise Intake Good for High RPM
- Ideal for Applications with Limited Hood Clearance
- For Top-End HP and Adequate Throttle Response
- Not for Mileage or Emissions Applications
- Use with Large Oval Port Heads (1975 and Earlier)
- Will fit Under Corvette Hood Without Modifications
- Not For Tall Block V8 Engines
Edelbrock – Victor Ram 2-R Big Block Chevy Intake Manifold Base (Part No.7075)
from
$573.99
Product Features:
See More
- 4500-8500 RPM Range
- Single Plane Type
- 9.28 in. Front Height, 9.28 in. Center Height, 9.28 in. Rear Height
- Satin Finish
- Base Only
Edelbrock – Victor 454-R Intake Manifold Big-Block Chevy (Part No.2909)
from
$387.99
For 3000 to 7500 RPM high-performance engines. For oval port heads. Superior performance for drag racing and marine. Accepts 4500 series carburetors. Can use standard flange carburetor with Edelbrock adapter PN(8716). Flow max power use 1 inch spacer PN(8717). Match with Victor and Victor Jr. heads. Includes nitrous bosses on runners.
Product Features:
See More
Product Features:
- For 3000 to 7500 RPM High-Performance Engines
- For Oval Port Heads
- Superior Performance for Drag Racing and Marine
- Accepts 4500 Series Carburetors
- Can Use Std-Flange Carb w/Edelbrock Adptr PN[8716]
- For Max Power Use 1-in. Spacer PN[8717]
- Match with Victor and Victor Jr Race Heads
- Includes Nitrous Bosses on Runners
Mallory – Unilite Ignition Module (Part No.605)
from
$85.29
Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.
Product Features:
See More
Product Features:
- Service Part
- No Moving Parts To Wear Out
- Self Contained Unit
- Can Drive OEM
- Can Drive High Performance Ignition Coils
Mallory – Distributor Wiring Harness (Part No.29349)
Upgrade your 1970 International M1200 with Top-Quality Performance and Racing Products
When it comes to maintaining or upgrading your 1970 International M1200, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your International or enhancing its overall performance, Performance and Racing Products are key to keeping your M1200 functioning at its best. At Advance Auto Parts, we offer a wide selection of 12 Performance and Racing Products for the 1970 International M1200, designed to meet your needs without breaking the bank.
From
Performance Engine
replacements to
Performance Ignition Products
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 1970 International M1200 at great prices.
Our Performance and Racing Products inventory for this model
ranges from just $7.69 to $798.99, with
an average price of $118.94.
Our 12 Performance and Racing Products in stock come from 3 trusted brands, so you’re sure to find the right part for your 1970 International M1200 without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1970 International M1200, we stock popular OEM and aftermarket Performance and Racing Products from top names
like Mallory, and more.
Mallory Performance and Racing Products
start at just $30.49 and boast an impressive 5 stars average rating from customers.
With 15 customer reviews and counting, our 1970 International M1200 Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Batteries and Chargers, Fluids and Chemicals
and more to make sure your 1970 International M1200 is always ready to roll. We’re committed to providing you with everything you need to keep your M1200 in top shape, all in one place.
Start shopping confidently below for your 1970 International M1200!
Best-Selling Performance Engines for 1970 International M1200s
Enhance the driving experience in your International with 8 quality Performance Engine components, starting at $19.99.
Edelbrock – Street Tunnel Ram Big Block Chevy 2-O Intake Manifold (Part No.7115)
from
$798.99
For 3500 to 7500 PRM. Use where low-end torque is not a prime factor. Great for engines with slightly modified heads. HEI ignition will not clear manifold. Street machines, street rods, pro-street and marine.
Product Features:
See More
Product Features:
- For 3500 to 7500 RPM
- Use Where Low-End Torque is Not a Prime Factor
- Great For Engines w/Slightly Modified Heads
- Top Has Vacuum Outlet for Power Brakes
- Will Accept Forward and Sideways Mounted Carbs
- Carburetor Center-to-Center Dimensions 9.38 in
- HEI Ignition Will Not Clear Manifold
- Street Machines; Street Rods; Pro-Street; Marine
Edelbrock – Victor Ram 2-R Big Block Chevy Intake Manifold Base (Part No.7075)
from
$573.99
Product Features:
See More
- 4500-8500 RPM Range
- Single Plane Type
- 9.28 in. Front Height, 9.28 in. Center Height, 9.28 in. Rear Height
- Satin Finish
- Base Only
Edelbrock – Torker II 2-O Big Block Chevy Intake Manifold (Part No.5061)
from
$432.99
use Performer 2-O #2161.
Product Features:
See More
Product Features:
- 2500 to 6500 RPM High Performance Street Engines
- Single-Plane Low-Rise Intake Good for High RPM
- Ideal for Applications with Limited Hood Clearance
- For Top-End HP and Adequate Throttle Response
- Not for Mileage or Emissions Applications
- Use with Large Oval Port Heads (1975 and Earlier)
- Will fit Under Corvette Hood Without Modifications
- Not For Tall Block V8 Engines
Edelbrock – Victor 454-R Intake Manifold Big-Block Chevy (Part No.2909)
from
$387.99
For 3000 to 7500 RPM high-performance engines. For oval port heads. Superior performance for drag racing and marine. Accepts 4500 series carburetors. Can use standard flange carburetor with Edelbrock adapter PN(8716). Flow max power use 1 inch spacer PN(8717). Match with Victor and Victor Jr. heads. Includes nitrous bosses on runners.
Product Features:
See More
Product Features:
- For 3000 to 7500 RPM High-Performance Engines
- For Oval Port Heads
- Superior Performance for Drag Racing and Marine
- Accepts 4500 Series Carburetors
- Can Use Std-Flange Carb w/Edelbrock Adptr PN[8716]
- For Max Power Use 1-in. Spacer PN[8717]
- Match with Victor and Victor Jr Race Heads
- Includes Nitrous Bosses on Runners
Edelbrock – Side-Mount Throttle Linkage for B/B Chevy #7075 Victor 2-R Manifold (Part No.7077)
from
$224.99
Product Features:
See More
- Steel Material
- Sideways Orientation
- Adjustable
- 2-Barrel Configuration
- Made In The USA
Edelbrock – Victor Ram Intake Manifold #7079 Big-Block Chevy, Top Only (Part No.7079)
from
$125.99
Top intake for Victor Ram 2-R PN(7075). Available for two in line carburetors and two sideways mounted 4500 series carburetors. Carburetor center-to-center dimensions 9.38 inches.
Product Features:
See More
Product Features:
- Top Intake for Victor Ram 2-R PN[7075]
- For Two Sideways Mounted 4500 Series Carburetors
- Carburetor Center-to-Center Dimensions 9.38 in
- Includes Top Gasket PN[6989]
- Use Matching Throttle Linkage PN[7077]
Edelbrock – Carb Adapter #2694 Mounts 4150 Holley Carb Sideways On Tunnel Ram 0.55 in-Pair (Part No.2694)
from
$82.99Product Features:
- Mounts Standard Flange Holley Carbs Sideways
- Use on Tunnel Rams
- 0.550 in. Thick
Edelbrock – Intake Manifold replacement top gasket (Part No.6989)
from
$19.99
Replacement gasket for Edelbrock tunnel ram intake. Use with intake PN(7115). Base PN(7190). Top PN(7191). One gasket only.
Product Features:
See More
Product Features:
- Replacement Gasket for Edelbrock Tunnel Ram Intake
- Use w/Intake PN[7115]/Base PN[7190]/Top PN[7191]
- One Gasket Only
Most Popular 1970 International M1200 Performance Ignition Products
Customize your International with 3 Performance Ignition Products products
like Performance Coils and
Performance Ignition Parts, all
priced under $186.99.
Mallory – Unilite Ignition Module (Part No.605)
from
$85.29
Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.
Product Features:
See More
Product Features:
- Service Part
- No Moving Parts To Wear Out
- Self Contained Unit
- Can Drive OEM
- Can Drive High Performance Ignition Coils
Mallory – Distributor Wiring Harness (Part No.29349)
Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)
from
$186.99
Universal street and strip. For street-driven vehicles with breaker point ignition or OE electronic ignition. Delivers optimum performance when used with these Mallory ignition products: UNILITE (R) distributor with a HYFIRE (R) capacitive discharge ignition, magnetic breaker less distributor with a HYFIRE (R) capacitive discharge ignition, or dual point distributor. Effective to approximately 6500 RPM when used with a point type distributor (depending on engine combination). Effective to approximately 8000 RPM when used with a Mallory HYFIRE electronic ignition control (depending on engine combination).
Product Features:
See More
Product Features:
- Glass Filled Polyester Case
- Longer Spark Duration
- Increased Performance
- No Energy Loss Due To Arcing
- Includes Brass Contact Terminal
Top Picks for 1970 International M1200 Performance Transmissions
Upgrade International M1200s with top-quality Performance Transmissions parts, including 1 OEM and aftermarket selections for your 1970 model.
FAG US – CUP (Part No.LM48510)
from
$7.69
CUP
Top-Rated Performance and Racing Products Brands For Your 1970 International M1200
Shop for the best-rated brands offering Performance and Racing Products and other products for your 1970 International M1200s. Below you’ll find some of our best rated Performance and Racing Products from Mallory, and more. Performance and Racing Products from these brands that fit a 1970 M1200 start at just $30.49 and are rated as high as 5 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.
Popular Mallory 1970 International M1200 Performance and Racing Products
When it comes to maintaining or upgrading your 1970 International M1200, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. Mallory ticks all of those boxes. We offer a wide selection of Mallory Performance and Racing Products, specifically designed for the 1970 International M1200. With over 3 Mallory brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $30.49, with an average price of just $100.92. Plus, with over 3 customer reviews and an average rating of 5 stars, you can trust that our Mallory Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$85.29
$85.29
(3)
“I like the Unilite product because it is so small and compact compared to the HEI stuff I normally use. If you are restricted on space Its a great pro”
FAQs for 1970 International M1200 Performance and Racing Products
Which Performance and Racing Products are best-sellers for 1970 International M1200s?
Out of 12 Performance and Racing Products that fit 1970 International M1200s, the following parts are the top sellers:
- Distributor Wiring Harness (17350080) – $30.49
- Promaster Classic Series; Ignition Coil (17350082) – $186.99
- CUP (50206003) – $7.69
What’s the price range for 1970 International M1200 Performance and Racing Products?
Performance and Racing Product prices for the 1970 International M1200 start at $7.69 and go up to $798.99 for the most premium parts.
What’s the average price of a Performance and Racing Product for a 1970 International M1200?
The average price for Performance and Racing Products for the 1970 International M1200 is $118.94. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Performance and Racing Products for other International M1200 model years?
What are the cheapest Performance and Racing Products for my 1970 International M1200?
The cheapest 1970 International M1200 Performance and Racing Products we carry in stock are:
- CUP (50206003) – $7.69
- Intake Manifold replacement top gasket (22341099) – $19.99
- Distributor Wiring Harness (17350080) – $30.49
- Carb Adapter #2694 Mounts 4150 Holley Carb Sideways On Tunnel Ram 0.55 in-Pair (22340996) – $82.99
- Unilite Ignition Module (17350025) – $85.29
What are the top-rated Performance and Racing Products that fit the 1970 International M1200?
Out of 15 reviews by customers, our 1970 International M1200 Performance and Racing Products have an average customer rating of . These are some of the highest-rated Performance and Racing Product types for the 1970 International M1200 and their top-rated products:
- Performance Ignition Products
- Unilite Ignition Module (17350025) – $85.29
What types of Performance and Racing Products do you sell for my 1970 International M1200?
As of 2/5/25, these are some of the most in-demand types of Performance and Racing Products for a 1970 International M1200:
Can I get help with 1970 International M1200 Performance and Racing Product orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about International Performance and Racing Products and more.
What is your return policy for International M1200 Performance and Racing Products?
Advance Auto Parts keeps returns simple. For new International M1200 Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
