from

$144.99

This exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the original manifold on specified vehicles. It includes all necessary gaskets and downpipe hardware for a complete repair.

Product Features:

Ideal replacement – this exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the stock manifold on specified vehicles
Reliable construction – durable materials resist warping, cracking and leaking for long-lasting performance
Complete repair – includes all necessary gaskets and downpipe hardware
Trustworthy design – built by industry leader in aftermarket manifolds

from

$880.99

LS1 full length engine swap header fits 66-72 Chevelle, El Camino, Monte Carlo and Sprint applications. Hooker has a complete line of engine swap headers, front frame mounts and transmission mounts for popular engine swaps. Available for Chevy, Chrysler and Ford small block and big block engines. Hooker swap headers and mounts are designed to provide an exact fit when used together. Hooker swap headers add the extra horsepower and torque the serious enthusiast demands. Hooker Headers are the best single improvement you can make.

Product Features:

High Performance
Affordable
Durable 16 Gauge Material
Welds Easier
Lasts Longer
Heat Cured
High Heat Resistant

from

$692.99

JBA shorty headers are one of the best performance upgrades available for any application. Hot Rodmagazine rated headers as one of the top 10 power parts installed on a vehicle. JBA shorty headers aresignificantly less restrictive than the stock manifol

Product Features:

JBA Performance Exhaust 1830S-4 1 5/8″ Header Shorty Stainless Steel 87-91 Suburban/Blazer
Mandrel bent stainless steel tube

from

$2.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$10.79

BRExhaust replacement exhaust brackets make repairs easy. Each gasket has been engineered to according to OE standards to ensure a gas-tight connection and precise fitment. Utilizing the OE specifications also makes installation easy.

Product Features:

Designed to facilitate hassle-free exhaust repair
Precise fitment
Manufactured from quality materials to ensure maximum durability
Designed for a leak free connection
OE structure and design
Built to OEM specifications
Secure gas-tight connection

from

$5.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$85.99

Product Features:

Show Quality Chrome Platinum
Durable Black Finish
Can Be Welded Or Clamped
Complete The System
Glass-Packed Resonators

from

$53.99

Made from aluminized steel for durability, Walker® premium pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.

Product Features:

RESISTS CORROSION — Durable aluminized steel construction for corrosion resistance and performance
EASY TO INSTALL — Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
OE-STYLE PERFORMANCE — Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
AVAILABLE IN DIFFERENT SIZES — Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information

from

$75.99

HEADER FLT BLOCK HUGGER

from

$57.99

Made from aluminized steel for durability, Walker® premium pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.

Product Features:

RESISTS CORROSION — Durable aluminized steel construction for corrosion resistance and performance
EASY TO INSTALL — Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
OE-STYLE PERFORMANCE — Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
AVAILABLE IN DIFFERENT SIZES — Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information

from

$67.99

Made from aluminized steel for durability, Walker® premium pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.

Product Features:

RESISTS CORROSION — Durable aluminized steel construction for corrosion resistance and performance
EASY TO INSTALL — Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
OE-STYLE PERFORMANCE — Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
AVAILABLE IN DIFFERENT SIZES — Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information

from

$227.99

Give your vintage vehicle’s exhaust system an upgrade with a DynoMax® dual header kit. Designed to attach to OE headers, it features a special reducer that allows for a variety of mounting options.

Product Features:

COMPATIBILITY — Designed for a variety of full-size 1975-87 GMC trucks and Chevrolet/GMC SUVs 2WD; see product information for compatibility and engine spec
BUILD IT YOURSELF — Design and custom fabricate your own exhaust system with this kit that attaches to OE headers
FLEXIBLE MOUNTING — Special reducer design allows for a variety of mounting options
IMPROVED FLOW CAPACITY — Smooth bends improve flow capacity over traditional bends
SPECS — Extra-long tailpipes with side exits with a full 2.25-in. diameter; tail pipes exit each side of vehicle behind rear tires; for trucks with OE catalytic converter due to cross member location
COMPLETE SOLUTION — Includes all the necessary clamps, hangers, flanges, gaskets, mounting hardware, intermediate, extension and tail pipes
PREMIUM MATERIALS – Made from quality aluminized steel for durability and long life
BETTER TOGETHER — Complete your system with premium DynoMax mufflers and DynoMax accessories for a complete performance exhaust system

from

$290.99

Designed to fit Hooker Competition header, Manifold or catalytic converter back applications. Cat-back kits install behind the converter and all other applicable emission control devices.

Product Features:

Reducer Flex-Tubes
Reduces Backpressure
Hardware Included
Instructions Included

from

$366.99

Designed to fit Hooker Competition header, Manifold or catalytic converter back applications. Cat-back kits install behind the converter and all other applicable emission control devices.

Product Features:

Reducer Flex-Tubes
Reduces Backpressure
Hardware Included
Instructions Included

from

$343.99

Designed to fit Hooker Competition header, Manifold or catalytic converter back applications. Cat-back kits install behind the converter and all other applicable emission control devices.

Product Features:

Reducer Flex-Tubes
Reduces Backpressure
Hardware Included
Instructions Included

from

$12.99

This exhaust manifold bolt and spring kit provides a time-saving solution. Designed for direct replacement of rusted or damaged exhaust bolts and springs, it prevents exhaust leaks while allowing movement between the exhaust pipe and muffler.

Product Features:

Ideal replacement – the manifold bolt and spring match the fit and function of the original equipment hardware, including bolt diameter, thread pitch and head type
Complete installation – this kit includes hardware required for securely attaching the manifold to the exhaust system
Trustworthy construction – the kit’s bolt and spring are made of hardened steel for durable, long-lasting service life
Quality tested – kit components have undergone extensive testing to ensure proper function and long service life

from

$44.49

ARP manufactures a variety of premium grade bolt and stud kits to facilitate installation of exhaust headers including the popular stainless stud kit with 12 point nuts. The Stainless 300 material is not affected by corrosion or extreme heat, making it ideal for the application.

Product Features:

Material Is Not Affected By Corrosion Or Extreme Heat
The Compact 12-Point Nut Lets You Easily Slip A Socket Close To The Pipe
Substantially Stronger Than Grade 8 Hardware
Nominally Rated At 170,000 Psi Tensile Strength
3/8″-16 Thread Size
1″ Underhead Length

from

$11.49

Exhaust manifold fastener kits provide a time-saving solution for repairing the manifold. Each kit is designed for direct replacement of rusted or damaged exhaust bolts and springs.

Product Features:

New hardware helps fix exhaust leaks
Depending on the application, kits include hardware to securely attach the manifold to the exhaust system
Also available separately (where applicable)
Hardened steel construction for long-lasting durability

from

$20.29

This exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles, and is made from quality materials for reliable performance.

Product Features:

Direct replacement – this exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles
Ideal solution – this kit is a reliable replacement for the original hardware that is missing or damaged, or has failed
Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$34.99

Manufactured from high-temperature steel core/graphite faced exhaust material. Expanded steel core provides stability and maximum torque retention to eliminate gasket failure. Graphite facing provides excellent heat resistance and thermal conductivity to transfer heat away from the cylinder head.

Product Features:

Withstands Intense Exhaust Heat
Graphite-Impregnated Facing
Steel Expanded Metal Core
Superior Tensile Strength
Resists Deteriorating
Anti-stick Properties
Easy Removal For Disassembly

from

$19.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function
Contains all gaskets and seals to remove and replace exhaust manifold
Contains all gaskets and seals to remove and replace exhaust manifold

from

$59.99

Mr. Gasket CopperSEAL Header Gaskets are a high quality copper gasket that performs extremely well and are reusable. We recommend this in all racing and high performance applications. They are for stock heads unless indicated, and work well in high heat and turbocharged applications.

Product Features:

Manufactured from ¿Dead Soft¿ (solid) .043″ thick copper material.
Manufactured from ┐Dead Soft┐ (solid) .043″ thick copper material.
.051″ embossment around each exhaust port to seal irregular surfaces. Total gasket thickness .094″
Total gasket thickness .094″.
Provides excellent sealing and durability
Conforms to and seals minor surface irregularities
For high performance street, drag race, oval track and turbocharged (extreme heat) applications.

from

$26.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function
Contains all gaskets and seals to remove and replace exhaust manifold
Contains all gaskets and seals to remove and replace exhaust manifold

from

$69.99

ARP manufactures a variety of premium grade bolt and stud kits to facilitate installation of exhaust headers including the popular stainless steel kit with 12-point nuts. The stainless material is not affected by corrosion or extreme heat, making it ideal for the application. What’s more, the compact 12-point nut lets you easily slip a socket close to the pipe. Each ARP accessory stud or bolt kit includes the specific number of parts for your appliaction, plus premium-quality washers and hex or 12-point nuts, as required. Studs are manufactured with a unique nut-starter nose that helps prevent cross-threading. Studs and bolts come either Black Oxide chrome moly or Stainless. Both are nominally rated at 180,000 psi tensile strength; substantially stronger than Grade 8 hardware. Specially drilled NASCAR models are available for those who wish to safety wire their bolts to prevent loosening.

Product Features: