1970 GMC Jimmy Suspension Parts

Below you will find various in-demand GMC Suspension Parts, components and accessories for your 1970 Jimmy. Advance Auto Parts has popular Jimmy parts like Coil and Leaf Springs Shocks and Struts and more. You’ll also find aftermarket and OEM Suspension Parts for other Jimmy model years including 1990, 1991, 1995, 1996, 1997, 1998, 1999, 2000, 2001 and more. Select a category of 1970 GMC Jimmy Suspension Parts below and start saving instantly.

Please Select your Vehicle to See Exact Fit Parts

Popular 1970 GMC Jimmy Suspension Parts Categories

Shock Absorber and Coil Spring Assemblies

Rear Shock and Struts

Leaf Springs

Front Shock and Struts

Coil Spring Sets

Rear Coil Springs

Shock Boots, Levelers, and Accessories

Leaf Spring and Shackle Bushing Kits

Essential Suspension Parts for 1970 GMC Jimmies

from

$41.99

New Goodmark Passenger Side Lower Shock Mount Bracket, For 1/2 And 3/4 Ton Models

Product Features:

For 1/2 And 3/4 Ton Models
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$41.99

New Goodmark Driver Side Lower Shock Mount Bracket, For 1/2 And 3/4 Ton Models

Product Features:

For 1/2 And 3/4 Ton Models
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$214.99

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

100% Load tested
Easy to install
Provides like-new steering
Designed to lower stresses for longer service life
Worn or sagging coil springs can cause premature tire wear due to vehicle misalignment

from

$167.99

100% Load tested
Easy to install
Provides like-new steering
Designed to lower stresses for longer service life
Worn or sagging coil springs can cause premature tire wear due to vehicle misalignment

from

$118.99

COMPLETESTRUTASSMBLY

from

$215.99

Ideal for light trucks that that tow or carry varying loads, Monroe load adjusting shocks include a heavy gauge calibrated spring that adjusts to road and weight conditions to provide extra control when operating conditions get more demanding.

Product Features:

REDUCES SAG UNDER LOAD – Ideal for occasionally hauling or towing varying loads, heavy gauge, calibrated coil spring reduces sag when loaded up to 1,200 lbs. (capacity limited by suspension, tires and transmission, see owner’s manual)
EXCEPTIONAL HANDLING – Tuned specifically for each application, full-displaced valving automatically adjusts to road extremes to provide ride consistency
CONSISTENT RIDE – OE all-weather fluid contains special modifiers to handle extreme temperatures and PTFE-banded piston helps reduce friction between the piston and pressure tube to enhance responsiveness to changing road surfaces
LONGER SERVICE LIFE – Self-lubricating fluid seal retains gas and reduces excessive friction against the piston rod to help reduce premature wear while heavy-duty nitrocarburized rod delivers long life
IMPROVES PERFORMANCE – Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
Nitrogen Gas Charged: For Improved Ride & Handling, Helps Maintain Tire To Road Contact By Reducing Aeration – On Most Applications
5/8 nitrocarburized rod for long service life.
Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.
Upper Mount Type: Cross Pin Mount – Closed Ended, 5/16″ Hole ID (Both Ends) X 2.7/8″ Pin Length (Hole Center to Center)

from

$112.99

Application tuned for precision on-road and off-road handling, Rancho® RS7MT® monotube shocks are highly effective in the dissipation of heat, making them ideal for extreme off-road use and larger wheel and tire packages. RS7MT shocks feature an integrated dirt wiper sealing system that keeps dirt and debris out, hardened piston rod that resists scuffs and corrosion plus an internal rebound bumper to smooth out your ride on any terrain.

Product Features:

PRECISE HANDLING AND PERFORMANCE — Deflective Disc Valving features digressive, linear or progressive tuning based on application requirements for precision handling and performance on- and off-road
STRONG AND DURABLE — Features a 14mm hardened chrome piston rod to resist scuffs & corrosion, double-welded loops at stress areas, double strength closure method and hot form reserve tube
HANDLES EXTREME TEMPERATURE CHANGES — Large 2-in. monotube body filled with all-weather fluid allows for cooler operation, increased vehicle control and ability to withstand internal temperatures of -40 to 248 Deg. F
REDUCES FADE — Full-floating dividing piston and high-pressure nitrogen gas maintains constant pressure against the hydraulic oil, reducing aeration and shock fade
SMOOTH PERFORMANCE — Internal rebound bumper and shouldered rubber bushings help reduce noise, vibration and ride harshness while the PTFE-banded piston enhances responsiveness to changing road conditions for an overall smoother ride
THE RIGHT FIT — Designed to fit right out of the box, application-specific mounting installs easily with no need for installing sleeves or extra hardware
KEEPS DIRT AND DEBRIS OUT — Sealing system with integrated dirt wiper helps keep moisture, dirt and debris from being ingested into the shock and contaminating the oil and destroying the internal seal
BUILT TO LAST — Large 46mm fluon-banded piston for consistent sealing between the piston and monotube for precise control, ride and handling; for extra protection, purchase shock boot RS1952 or RS1961
BOLD APPEARANCE — Black satin finish with distinctive Rancho red logo for an eye-catching look that stands out
BUY WITH CONFIDENCE — Comes with Rancho’s Limited Warranty

from

$72.99

The shock that started it all! Rancho® RS5000 series has been the shock of choice for light trucks and sport utility vehicles since 1985. Available for stock and lifted applications, RS5000 is ideal for on and off-road use, at an affordable price. Covered by Rancho®’s limited warranty.

Product Features:

Ten-stage velocity sensitive valving – Provides tuning specific for each vehicle
5/8-in. (16mm) diameter piston rod (select applications) – Adds strength and durability. Size varies by application.
1 3/8-in. (35mm) diameter piston (select applications) – Ensures performance in any environment
Protective boot included – Protects the shock rod and oil seal
Limited Warranty – Guarantees your investment

from

$26.99

Product Features:

Made from HYPER-Flex Polyurethane

from

$31.49

Easy to install
Restores like-new steering and handling
Engineered to provide long life and dependability
Construction and design validated by MOOG engineers
Incorporates proven design and engineering features

from

$174.99

100% Load tested
Easy to install
Provides like-new steering
Designed to lower stresses for longer service life
Worn or sagging coil springs can cause premature tire wear due to vehicle misalignment

from

$26.99

Monroe Shock-Mate Shock Absorber Boot Kits are universal replacement shock boots use to protect the shock’s piston rod from dirt, mud and other contaminants – protecting the life of your shocks.

Product Features:

Protects the shock’s piston rod from damage
Universal design for easy installation
Tie-strap included for a secure fit
Constructed from high quality urethane for maximum durability
Multiple color choices available

from

$17.79

Easy to install
Restores like-new steering and handling
Engineered to provide long life and dependability
Construction and design validated by MOOG engineers
Incorporates proven design and engineering features

from

$73.99

Adds a dramatic amount of performance and durability to any vehicle, cars, trucks and SUVs. Helps the vehicle be in control – when maneuvering through turns, during standing start accelerations, braking, even over bumps and berms. Made of Energy’s Hyper-Flex performance polyurethane which lasts 5 -10 times longer than conventional rubber components.

Product Features:

Made of Superior Hyper-Flex+ Material
Adds Dramatic Amount of Performance/Durability
Helps Vehicle Be in Control
Allows the Suspension to Function Properly

from

$74.99

Made of Superior Hyper-Flex+ Material
Adds Dramatic Amount of Performance/Durability
Helps Vehicle Be in Control
Allows the Suspension to Function Properly

from

$70.99

Made of Superior Hyper-Flex+ Material
Adds Dramatic Amount of Performance/Durability
Helps Vehicle Be in Control
Allows the Suspension to Function Properly

from

$24.99

Protects the shock’s piston rod from damage
Universal design for easy installation
Tie-strap included for a secure fit
Constructed from high quality urethane for maximum durability
Multiple color choices available

from

$550.99

Properly functioning leaf springs hold the weight and payload of a vehicle or trailer and are essential to suspension performance and passenger comfort. Check the product attributes to select the right leaf spring for your application.

Product Features:

Direct replacement – these leaf springs are designed to match the fit and function of the original leaf springs on specific vehicles or trailers
Ideal solution – seamlessly replaces leaf springs damaged by overloading, collision, cracking or corrosion, or are due for replacement
Durable construction – made from quality materials to strict specifications to ensure reliable performance and long service life
Trustworthy quality – engineered, manufactured and supported by the premier aftermarket leaf spring provider in the USA
Durable design – rigorously engineered and carefully manufactured to provide like-new feel and dependable service life

from

$331.99

Direct replacement – these leaf springs are designed to match the fit and function of the original leaf springs on specific vehicles or trailers
Ideal solution – seamlessly replaces leaf springs damaged by overloading, collision, cracking or corrosion, or are due for replacement
Durable construction – made from quality materials to strict specifications to ensure reliable performance and long service life
Trustworthy quality – engineered, manufactured and supported by the premier aftermarket leaf spring provider in the USA

from

$332.99

Direct replacement – these leaf springs are designed to match the fit and function of the original leaf springs on specific vehicles or trailers
Ideal solution – seamlessly replaces leaf springs damaged by overloading, collision, cracking or corrosion, or are due for replacement
Durable construction – made from quality materials to strict specifications to ensure reliable performance and long service life
Trustworthy quality – engineered, manufactured and supported by the premier aftermarket leaf spring provider in the USA

from

$344.99

Direct replacement – these leaf springs are designed to match the fit and function of the original leaf springs on specific vehicles or trailers
Ideal solution – seamlessly replaces leaf springs damaged by overloading, collision, cracking or corrosion, or are due for replacement
Durable construction – made from quality materials to strict specifications to ensure reliable performance and long service life
Trustworthy quality – engineered, manufactured and supported by the premier aftermarket leaf spring provider in the USA

from

$71.99

HYDRO H7000 series shocks are recommended for multiple shock applications and mild to moderate off road use. Skyjacker(R) hydro shocks: Skyjacker(R) suspensions offers you a high quality shock absorber with true velocity sensitive valving. Shock absorbers, or spring dampers as it is called everywhere else except in the U.S, control the rate at which suspension springs compress and rebound. As the shock is pushed together, this is called bump or compression. As the shock expands, this is called rebound or extension. Absorbing the shock of bumps and suspension loading is actually performed by the springs in the suspension. The shock real job is controlling the energy stored in the springs. The performance specific internal components of Skyjacker shocks respond to the on and off road conditions instantly. Whether you are going over rough or smooth terrain at slow or fast speeds, the true velocity sensitive valving produces a stable, controlled level of resistance for better handling, improved stability, and maximum comfort. The technological innovations of these durable, long lasting shocks from Skyjacker(R) deliver a noticeable advantage over the original equipment and other shock dampeners. Skyjacker shock absorbers deliver a safe, comfortable ride with improved handling and stability. They keep the tires in contact with the terrain and put you in control of the road ahead

Product Features:

Hydraulic Action. Leak Proof Seal Prevents Hydraulic Fluid From Passing Around Piston Head For A Consistent And Reliable Ride
Multi Stage Velocity Sensitive Valving
Twin Tube Construction. DOM Tubing Reduces Internal Wear For Longer Product Life
Bonded Iron Piston For Durability And Longer Shock Life
Chromed Piston Rod Features Micro Polished Shaft For Improved Product Life And Performance
Orifice Disk For Axle Control In Any Condition
Red Polyurethane Bushings

from

$91.99

Featuring a unique, exclusive valving system and advanced compression functionality, Rancho RS5000X shocks deliver improved overall on- and off-road handling and performance.

Product Features:

IMPROVED HANDLING AND PERFORMANCE – Cross Tuned technology featuring exclusive rebound valving system and advanced compression phase improves overall handling and performance on and off road
MINIMIZES ROUGH RIDE – Exclusive Progressive Engagement Valving is custom-tuned for each vehicle to help reduce initial impacts at low speeds and minimizes a rough ride
STRONG AND DURABLE – Features a 16mm nitro-carburized piston rod to resist scuffs & corrosion, double-welded loops at stress areas, 35mm sintered iron piston for enhanced structural integrity and polyvinyl protective boot
HANDLES EXTREME TEMPERATURE CHANGES – Large twin-tube body filled with all-weather fluid allows for cooler operation, increased vehicle control and ability to withstand internal temperatures of -40 to 248 Deg. F
SMOOTH PERFORMANCE – Polyurethane rebound bumper and rubber bushings help absorb ride harshness while the fluon-banded piston enhances responsiveness to changing road conditions for an overall smoother ride
REDUCES FADE – Nitrogen gas pressurized to 150 PSI to minimize air-to-oil mixture to reduce damping performance fade and foaming
MAINTAINS VEHICLE CONTROL – Compression Control Valve is custom-tuned for each vehicle to regulate fluid transfer to absorb impacts without disc flutter and help maintain shock motion control
BUILT TO LAST – Low-friction, self-lubricating seal retains gas and oil for quicker rebound and smoother compression while the application-specific piston delivers heightened control of shock motion due to the expanded piston area
BUY WITH CONFIDENCE – Comes with Rancho’s Limited Warranty

from

$85.99

NITRO N8000 series shocks are recommended for full size vehicles and moderate to extreme off-road applications. Skyjacker(R) nitro shocks, Skyjacker(R) suspensions offers you a high quality shock absorber with true velocity sensitive valving. Shock absorbers, or spring dampers as it is called everywhere else except in the U.S, control the rate at which suspension springs compress and rebound. As the shock is pushed together, this is called bump or compression. As the shock expands, this is called rebound or extension. Absorbing the shock of bumps and suspension loading is actually performed by the springs in the suspension. The shock real job is controlling the energy stored in the springs. The performance specific internal components of Skyjacker shocks respond to the on- and off-road conditions instantly. Whether you are going over rough or smooth terrain at slow or fast speeds, the true velocity sensitive valving produces a stable, controlled level of resistance for better handling, improved stability, and maximum comfort. The technological innovations of these durable, long lasting shocks from Skyjacker(R) deliver a noticeable advantage over the original equipment and other shock dampeners. Skyjacker shock absorbers deliver a safe, comfortable ride with improved handling and stability. They keep the tires in contact with the terrain and put you in control of the road ahead

Product Features:

150 PSI Pressurized Nitrogen Gas
Multi Stage Velocity Sensitive Valving
Twin Tube Construction. DOM Tubing Reduces Internal Wear For Longer Product Life
Bonded Iron Piston For Durability And Longer Shock Life
Chromed Piston Rod Features Micro Polished Shaft For Improved Product Life And Performance
Orifice Disk For Axle Control In Any Condition
Red Polyurethane Bushings

from

$37.99

Monroe Gas-Matic truck shock absorber are gas charged and provide improved control at an economical price.

Product Features:

Available for import and domestic light trucks and vans
Gas-charged unit
Improved handling and control
Economical OE replacement
Meets OE product specifications

from

$81.99

Featuring a unique, exclusive valving system and advanced compression functionality, Rancho RS5000X shocks deliver improved overall on- and off-road handling and performance.

Product Features:

IMPROVED HANDLING AND PERFORMANCE – Cross Tuned technology featuring exclusive rebound valving system and advanced compression phase improves overall handling and performance on and off road
MINIMIZES ROUGH RIDE – Exclusive Progressive Engagement Valving is custom-tuned for each vehicle to help reduce initial impacts at low speeds and minimizes a rough ride
STRONG AND DURABLE – Features a 16mm nitro-carburized piston rod to resist scuffs & corrosion, double-welded loops at stress areas, 35mm sintered iron piston for enhanced structural integrity and polyvinyl protective boot
HANDLES EXTREME TEMPERATURE CHANGES – Large twin-tube body filled with all-weather fluid allows for cooler operation, increased vehicle control and ability to withstand internal temperatures of -40 to 248 Deg. F
SMOOTH PERFORMANCE – Polyurethane rebound bumper and rubber bushings help absorb ride harshness while the fluon-banded piston enhances responsiveness to changing road conditions for an overall smoother ride
REDUCES FADE – Nitrogen gas pressurized to 150 PSI to minimize air-to-oil mixture to reduce damping performance fade and foaming
MAINTAINS VEHICLE CONTROL – Compression Control Valve is custom-tuned for each vehicle to regulate fluid transfer to absorb impacts without disc flutter and help maintain shock motion control
BUILT TO LAST – Low-friction, self-lubricating seal retains gas and oil for quicker rebound and smoother compression while the application-specific piston delivers heightened control of shock motion due to the expanded piston area
BUY WITH CONFIDENCE – Comes with Rancho’s Limited Warranty

from

$42.99

Monroe Gas-Matic truck shock absorber are gas charged and provide improved control at an economical price.

Product Features:

Available for import and domestic light trucks and vans
Gas-charged unit
Improved handling and control
Economical OE replacement
Meets OE product specifications

from

$87.99

The performance specific internal components of Skyjacker shocks respond to the on- and off-road conditions instantly. Whether you are going over rough or smooth terrain at slow or fast speeds, the true velocity sensitive valving produces a stable, controlled level of resistance for better handling, improved stability, and maximum comfort. The technological innovations of these durable, long lasting shocks from Skyjacker(R) deliver a noticeable advantage over the original equipment and other shock dampeners. Skyjacker shock absorbers deliver a safe, comfortable ride with improved handling and stability. They keep the tires in contact with the terrain and put you in control of the road ahead.

Product Features:

Twin Tube Construction
Advanced Foam-Cell Technology
Vehicle Specific Multi-Stage Valving
Increased Fluid Capacity For MAX Heat Dissipation
360 Degree Arc-Welded End Mount And 180 Degree Directional Mounting
Chrome Plated Shaft And Sintered Iron Piston
Comes With Black Boot

Upgrade your 1970 GMC Jimmy with Top-Quality Suspension Parts

When it comes to maintaining or upgrading your 1970 GMC Jimmy, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your GMC or enhancing its overall performance, Suspension Parts are key to keeping your Jimmy functioning at its best. At Advance Auto Parts, we offer a wide selection of 58 Suspension Parts for the 1970 GMC Jimmy, designed to meet your needs without breaking the bank. From Coil and Leaf Spring replacements to Shocks and Struts upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Suspension Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Suspension Parts for your 1970 GMC Jimmy at great prices. Our Suspension Parts inventory for this model ranges from just $17.99 to $332.99, with an average price of $83.50. Our 58 Suspension Parts in stock come from 12 trusted brands, so you’re sure to find the right part for your 1970 GMC Jimmy without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1970 GMC Jimmy, we stock popular OEM and aftermarket Suspension Parts from top names like Moog, Monroe, Rancho, and more. Moog Suspension Parts start at just $177.99 and boast an impressive 4.5 stars average rating from customers. Monroe and Rancho also bring quality to the table, with Suspension Parts available starting at $79.99, and at an average 4.4 stars rating. With 817 customer reviews and counting, our 1970 GMC Jimmy Suspension Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Suspension Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1970 GMC Jimmy is always ready to roll. We’re committed to providing you with everything you need to keep your Jimmy in top shape, all in one place. Start shopping confidently below for your 1970 GMC Jimmy!

Best-Selling Coil and Leaf Springs for 1970 GMC Jimmies

Enhance the driving experience in your GMC with 16 quality Coil and Leaf Spring components, starting at $17.99.

show more show less

from

$177.99

100% Load tested
Easy to install
Provides like-new steering
Designed to lower stresses for longer service life
Worn or sagging coil springs can cause premature tire wear due to vehicle misalignment

from

$138.99

REDUCES SAG UNDER LOAD – Ideal for occasionally hauling or towing varying loads, heavy gauge, calibrated coil spring reduces sag when loaded up to 1,200 lbs. (capacity limited by suspension, tires and transmission, see owner’s manual)
EXCEPTIONAL HANDLING – Tuned specifically for each application, full-displaced valving automatically adjusts to road extremes to provide ride consistency
CONSISTENT RIDE – OE all-weather fluid contains special modifiers to handle extreme temperatures and PTFE-banded piston helps reduce friction between the piston and pressure tube to enhance responsiveness to changing road surfaces
LONGER SERVICE LIFE – Self-lubricating fluid seal retains gas and reduces excessive friction against the piston rod to help reduce premature wear while heavy-duty nitrocarburized rod delivers long life
IMPROVES PERFORMANCE – Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
Nitrogen Gas Charged: For Improved Ride & Handling, Helps Maintain Tire To Road Contact By Reducing Aeration – On Most Applications
5/8 nitrocarburized rod for long service life.
Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.
Upper Mount Type: Loop Bushing and Cantilever Pin Mount – 1/2″ Stud Diameter X 1 5/16″ Stud Length (Center of Loop to Frame)

from

$188.99

100% Load tested
Easy to install
Provides like-new steering
Designed to lower stresses for longer service life
Worn or sagging coil springs can cause premature tire wear due to vehicle misalignment

from

$185.99

100% Load tested
Easy to install
Provides like-new steering
Designed to lower stresses for longer service life
Worn or sagging coil springs can cause premature tire wear due to vehicle misalignment

from

$25.49

Product Features:

Made from HYPER-Flex Polyurethane

from

$26.99

Product Features:

Made from HYPER-Flex Polyurethane

from

$17.99

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:

Rubber or Heat Treated bushings
No Squeak
Reduces vibration

from

$332.99

Direct replacement – these leaf springs are designed to match the fit and function of the original leaf springs on specific vehicles or trailers
Ideal solution – seamlessly replaces leaf springs damaged by overloading, collision, cracking or corrosion, or are due for replacement
Durable construction – made from quality materials to strict specifications to ensure reliable performance and long service life
Trustworthy quality – engineered, manufactured and supported by the premier aftermarket leaf spring provider in the USA

from

$174.99

100% Load tested
Easy to install
Provides like-new steering
Designed to lower stresses for longer service life
Worn or sagging coil springs can cause premature tire wear due to vehicle misalignment

from

$88.99

COMPLETESTRUTASSMBLY

from

$78.99

COMPLETESTRUTASSMBLY

from

$70.99

Made of Superior Hyper-Flex+ Material
Adds Dramatic Amount of Performance/Durability
Helps Vehicle Be in Control
Allows the Suspension to Function Properly

from

$65.99

All in one leaf spring bushing service kit covering front and rear eyes of the leaf plus shackle bushings. High kilometres and heavy load carrying causes excessive wear on rubber bushings. Nolathane’s signature black bushings are made tough and offer outstanding abrasion resistance, high load bearing capability (4WD’s, utes and towing), flexibility, increased tensile strength and chemical resistance to oil, grease, ozone and weathering.

Product Features:

Kit Contains: 12 bushings, 6 Tubes, Grease

from

$62.99

COMPLETESTRUTASSMBLY

from

$52.99

COMPLETESTRUTASSMBLY

from

$32.99

Rubber or Heat Treated bushings
No Squeak
Reduces vibration

Most Popular 1970 GMC Jimmy Shocks and Struts

Customize your GMC with 42 Shocks and Struts products like Rear Shock and Struts, Front Shock and Struts, and Strut Bellows, all priced under $149.99.

show more show less

from

$89.99

Designed for midsize and full-size trucks and vans, Monroe Gas-Magnum shock absorbers provide firm control without a harsh ride. With up to twice the fluid capacity of standard 1-in. bore shocks, they work more efficiently with less effort.

Product Features:

DESIGNED FOR TRUCKS AND VANS – Engineered for hardworking full-size trucks and vans and features full-displaced valving on compression cycles to deliver controlled ride and handling
BUILT TO LAST – Heavy-duty nitrocarburized rod (non-dust shield units only) and sintered iron piston enhance durability for longer service life while self-lubricating fluid seal reduces friction against piston rod to reduce wear
CONSISTENT RIDE – OE all-weather fluid contains special modifiers to handle extreme temperatures and help reduce friction and ensure smooth rod reaction
IMPROVES PERFORMANCE – Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
LONGER SERVICE LIFE – Larger bore and bigger 2-in. reserve tube work together to hold more oil for greater capacity to allow the shock to work efficiently for controlled ride and longer service life
BUY WITH CONFIDENCE – Comes with Monroe’s limited warranty and exclusive Feel the Difference guarantee
Sintered Iron Piston: Stronger than traditional metals, enhances durability for longer service life.
Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.

from

$83.99

Designed to restore a vehicle’s original factory drivability and performance, Monroe OESpectrum light truck shock absorbers provide an exceptional level of handling precision and control while filtering out noise, vibration and harshness.

Product Features:

EXCEPTIONAL HANDLING – Full displaced valving, tuned specifically to each vehicle, adjusts to road extremes while the larger bore provides more efficient damping control to provide consistency and a smooth ride
CONTROL AND DURABILITY – PTFE-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
REDUCED NOISE, VIBRATION AND HARSHNESS – Twin Technology Active Control System delivers exceptional control under most driving conditions while isolating impact-related noise, vibration and harshness
IMPROVES PERFORMANCE – Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
CONSISTENT RIDE – OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
BUILT TO LAST – Self-lubricating fluid seal retains gas and reduces excessive friction against the piston rod to help reduce premature wear
BUY WITH CONFIDENCE – Comes with Monroe’s limited warranty and exclusive Feel the Difference guarantee
5/8-inch (15.9 mm) diameter piston rod (On most applications)

from

$79.99

DESIGNED FOR TRUCKS AND VANS – Engineered for hardworking full-size trucks and vans and features full-displaced valving on compression cycles to deliver controlled ride and handling
BUILT TO LAST – Heavy-duty nitrocarburized rod (non-dust shield units only) and sintered iron piston enhance durability for longer service life while self-lubricating fluid seal reduces friction against piston rod to reduce wear
CONSISTENT RIDE – OE all-weather fluid contains special modifiers to handle extreme temperatures and help reduce friction and ensure smooth rod reaction
IMPROVES PERFORMANCE – Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
LONGER SERVICE LIFE – Larger bore and bigger 2-in. reserve tube work together to hold more oil for greater capacity to allow the shock to work efficiently for controlled ride and longer service life
BUY WITH CONFIDENCE – Comes with Monroe’s limited warranty and exclusive Feel the Difference guarantee
Sintered Iron Piston: Stronger than traditional metals, enhances durability for longer service life.
Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.

from

$67.99

Monroe Gas-Matic truck shock absorber are gas charged and provide improved control at an economical price.

Product Features:

Available for import and domestic light trucks and vans
Gas-charged unit
Improved handling and control
Economical OE replacement
Meets OE product specifications

from

$43.99

Gas-charged shock absorber that provides improved vehicle control for today’s light trucks, vans, full-size picks-ups and 4×4’s at an economical price.

Product Features:

Available for import and domestic trucks, vans, full-size pick-ups and 4×4’s
Gas-charged unit
Improved handling and control
Economical OE replacement
Meets OE product specifications

from

$38.99

Gas-charged shock absorber that provides improved vehicle control for today’s light trucks, vans, full-size picks-ups and 4×4’s at an economical price.

Product Features:

Available for import and domestic trucks, vans, full-size pick-ups and 4×4’s
Gas-charged unit
Improved handling and control
Economical OE replacement
Meets OE product specifications

from

$90.99

Featuring a unique, exclusive valving system and advanced compression functionality, Rancho RS5000X shocks deliver improved overall on-road and off-road handling and performance.

Product Features:

IMPROVED HANDLING AND PERFORMANCE – Cross Tuned technology featuring exclusive rebound valving system and advanced compression phase improves overall handling and performance on and off road
MINIMIZES ROUGH RIDE – Exclusive Progressive Engagement Valving is custom-tuned for each vehicle to help reduce initial impacts at low speeds and minimizes a rough ride
STRONG AND DURABLE – Features a 16mm nitro-carburized piston rod to resist scuffs & corrosion, double-welded loops at stress areas, 35mm sintered iron piston for enhanced structural integrity and polyvinyl protective boot
HANDLES EXTREME TEMPERATURE CHANGES – Large twin-tube body filled with all-weather fluid allows for cooler operation, increased vehicle control and ability to withstand internal temperatures of -40 to 248 degree F
SMOOTH PERFORMANCE – Polyurethane rebound bumper and rubber bushings help absorb ride harshness while the fluon-banded piston enhances responsiveness to changing road conditions for an overall smoother ride
REDUCES FADE – Nitrogen gas pressurized to 150 PSI to minimize air-to-oil mixture to reduce damping performance fade and foaming
MAINTAINS VEHICLE CONTROL – Compression Control Valve is custom-tuned for each vehicle to regulate fluid transfer to absorb impacts without disc flutter and help maintain shock motion control
BUILT TO LAST – Low-friction, self-lubricating seal retains gas and oil for quicker rebound and smoother compression while the application-specific piston delivers heightened control of shock motion due to the expanded piston area
BUY WITH CONFIDENCE – Comes with Rancho’s Limited Warranty

from

$26.99

Protects the shock’s piston rod from damage
Universal design for easy installation
Tie-strap included for a secure fit
Constructed from high quality urethane for maximum durability
Multiple color choices available

from

$24.99

Protects the shock’s piston rod from damage
Universal design for easy installation
Tie-strap included for a secure fit
Constructed from high quality urethane for maximum durability
Multiple color choices available

from

$90.99

IMPROVED HANDLING AND PERFORMANCE – Cross Tuned technology featuring exclusive rebound valving system and advanced compression phase improves overall handling and performance on and off road
MINIMIZES ROUGH RIDE – Exclusive Progressive Engagement Valving is custom-tuned for each vehicle to help reduce initial impacts at low speeds and minimizes a rough ride
STRONG AND DURABLE – Features a 16mm nitro-carburized piston rod to resist scuffs & corrosion, double-welded loops at stress areas, 35mm sintered iron piston for enhanced structural integrity and polyvinyl protective boot
HANDLES EXTREME TEMPERATURE CHANGES – Large twin-tube body filled with all-weather fluid allows for cooler operation, increased vehicle control and ability to withstand internal temperatures of -40 to 248 degree F
SMOOTH PERFORMANCE – Polyurethane rebound bumper and rubber bushings help absorb ride harshness while the fluon-banded piston enhances responsiveness to changing road conditions for an overall smoother ride
REDUCES FADE – Nitrogen gas pressurized to 150 PSI to minimize air-to-oil mixture to reduce damping performance fade and foaming
MAINTAINS VEHICLE CONTROL – Compression Control Valve is custom-tuned for each vehicle to regulate fluid transfer to absorb impacts without disc flutter and help maintain shock motion control
BUILT TO LAST – Low-friction, self-lubricating seal retains gas and oil for quicker rebound and smoother compression while the application-specific piston delivers heightened control of shock motion due to the expanded piston area
BUY WITH CONFIDENCE – Comes with Rancho’s Limited Warranty

from

$53.99

DESIGNED FOR TRUCKS AND VANS – Engineered for hardworking full-size trucks and vans and features full-displaced valving on compression cycles to deliver controlled ride and handling
BUILT TO LAST – Heavy-duty nitrocarburized rod (non-dust shield units only) and sintered iron piston enhance durability for longer service life while self-lubricating fluid seal reduces friction against piston rod to reduce wear
CONSISTENT RIDE – OE all-weather fluid contains special modifiers to handle extreme temperatures and help reduce friction and ensure smooth rod reaction
IMPROVES PERFORMANCE – Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
LONGER SERVICE LIFE – Larger bore and bigger 2-in. reserve tube work together to hold more oil for greater capacity to allow the shock to work efficiently for controlled ride and longer service life
BUY WITH CONFIDENCE – Comes with Monroe’s limited warranty and exclusive Feel the Difference guarantee
Sintered Iron Piston: Stronger than traditional metals, enhances durability for longer service life.
Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.

from

$66.99

Product Features:

KYB recommended OEM replacement shock
Specifically calibrated to help restore the original handling and control characteristics of GM trucks
Uses a seamless working cylinder matched with a Teflon coated piston band for a positive seal and longer life
Triple chrome plated piston rod and multi-lip oil seals that reduce wear
Solid seamless mounting eye rings and bolt bushings to eliminate rattles

from

$79.99

EXCEPTIONAL HANDLING – Full displaced valving, tuned specifically to each vehicle, adjusts to road extremes while the larger bore provides more efficient damping control to provide consistency and a smooth ride
CONTROL AND DURABILITY – PTFE-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
REDUCED NOISE, VIBRATION AND HARSHNESS – Twin Technology Active Control System delivers exceptional control under most driving conditions while isolating impact-related noise, vibration and harshness
IMPROVES PERFORMANCE – Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
CONSISTENT RIDE – OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
BUILT TO LAST – Self-lubricating fluid seal retains gas and reduces excessive friction against the piston rod to help reduce premature wear
BUY WITH CONFIDENCE – Comes with Monroe’s limited warranty and exclusive Feel the Difference guarantee
5/8-inch (15.9 mm) diameter piston rod (On most applications)

from

$99.99

IMPROVED HANDLING AND PERFORMANCE – Cross Tuned technology featuring exclusive rebound valving system and advanced compression phase improves overall handling and performance on and off road
MINIMIZES ROUGH RIDE – Exclusive Progressive Engagement Valving is custom-tuned for each vehicle to help reduce initial impacts at low speeds and minimizes a rough ride
STRONG AND DURABLE – Features a 16mm nitro-carburized piston rod to resist scuffs & corrosion, double-welded loops at stress areas, 35mm sintered iron piston for enhanced structural integrity and polyvinyl protective boot
HANDLES EXTREME TEMPERATURE CHANGES – Large twin-tube body filled with all-weather fluid allows for cooler operation, increased vehicle control and ability to withstand internal temperatures of -40 to 248 degree F
SMOOTH PERFORMANCE – Polyurethane rebound bumper and rubber bushings help absorb ride harshness while the fluon-banded piston enhances responsiveness to changing road conditions for an overall smoother ride
REDUCES FADE – Nitrogen gas pressurized to 150 PSI to minimize air-to-oil mixture to reduce damping performance fade and foaming
MAINTAINS VEHICLE CONTROL – Compression Control Valve is custom-tuned for each vehicle to regulate fluid transfer to absorb impacts without disc flutter and help maintain shock motion control
BUILT TO LAST – Low-friction, self-lubricating seal retains gas and oil for quicker rebound and smoother compression while the application-specific piston delivers heightened control of shock motion due to the expanded piston area
BUY WITH CONFIDENCE – Comes with Rancho’s Limited Warranty

from

$94.99

IMPROVED HANDLING AND PERFORMANCE – Cross Tuned technology featuring exclusive rebound valving system and advanced compression phase improves overall handling and performance on and off road
MINIMIZES ROUGH RIDE – Exclusive Progressive Engagement Valving is custom-tuned for each vehicle to help reduce initial impacts at low speeds and minimizes a rough ride
STRONG AND DURABLE – Features a 16mm nitro-carburized piston rod to resist scuffs & corrosion, double-welded loops at stress areas, 35mm sintered iron piston for enhanced structural integrity and polyvinyl protective boot
HANDLES EXTREME TEMPERATURE CHANGES – Large twin-tube body filled with all-weather fluid allows for cooler operation, increased vehicle control and ability to withstand internal temperatures of -40 to 248 degree F
SMOOTH PERFORMANCE – Polyurethane rebound bumper and rubber bushings help absorb ride harshness while the fluon-banded piston enhances responsiveness to changing road conditions for an overall smoother ride
REDUCES FADE – Nitrogen gas pressurized to 150 PSI to minimize air-to-oil mixture to reduce damping performance fade and foaming
MAINTAINS VEHICLE CONTROL – Compression Control Valve is custom-tuned for each vehicle to regulate fluid transfer to absorb impacts without disc flutter and help maintain shock motion control
BUILT TO LAST – Low-friction, self-lubricating seal retains gas and oil for quicker rebound and smoother compression while the application-specific piston delivers heightened control of shock motion due to the expanded piston area
BUY WITH CONFIDENCE – Comes with Rancho’s Limited Warranty

from

$42.99

Monroe Gas-Matic truck shock absorber are gas charged and provide improved control at an economical price.

Product Features:

Available for import and domestic light trucks and vans
Gas-charged unit
Improved handling and control
Economical OE replacement
Meets OE product specifications

from

$71.99

Hydraulic Action. Leak Proof Seal Prevents Hydraulic Fluid From Passing Around Piston Head For A Consistent And Reliable Ride
Multi Stage Velocity Sensitive Valving
Twin Tube Construction. DOM Tubing Reduces Internal Wear For Longer Product Life
Bonded Iron Piston For Durability And Longer Shock Life
Chromed Piston Rod Features Micro Polished Shaft For Improved Product Life And Performance
Orifice Disk For Axle Control In Any Condition
Red Polyurethane Bushings

from

$90.99

Featuring a unique, exclusive valving system and advanced compression functionality, Rancho RS5000X shocks deliver improved overall on- and off-road handling and performance.

Product Features:

IMPROVED HANDLING AND PERFORMANCE – Cross Tuned technology featuring exclusive rebound valving system and advanced compression phase improves overall handling and performance on and off road
MINIMIZES ROUGH RIDE – Exclusive Progressive Engagement Valving is custom-tuned for each vehicle to help reduce initial impacts at low speeds and minimizes a rough ride
STRONG AND DURABLE – Features a 16mm nitro-carburized piston rod to resist scuffs & corrosion, double-welded loops at stress areas, 35mm sintered iron piston for enhanced structural integrity and polyvinyl protective boot
HANDLES EXTREME TEMPERATURE CHANGES – Large twin-tube body filled with all-weather fluid allows for cooler operation, increased vehicle control and ability to withstand internal temperatures of -40 to 248 Deg. F
SMOOTH PERFORMANCE – Polyurethane rebound bumper and rubber bushings help absorb ride harshness while the fluon-banded piston enhances responsiveness to changing road conditions for an overall smoother ride
REDUCES FADE – Nitrogen gas pressurized to 150 PSI to minimize air-to-oil mixture to reduce damping performance fade and foaming
MAINTAINS VEHICLE CONTROL – Compression Control Valve is custom-tuned for each vehicle to regulate fluid transfer to absorb impacts without disc flutter and help maintain shock motion control
BUILT TO LAST – Low-friction, self-lubricating seal retains gas and oil for quicker rebound and smoother compression while the application-specific piston delivers heightened control of shock motion due to the expanded piston area
BUY WITH CONFIDENCE – Comes with Rancho’s Limited Warranty

from

$26.99

Product Features:

Made from HYPER-Flex Polyurethane

from

$85.99

150 PSI Pressurized Nitrogen Gas
Multi Stage Velocity Sensitive Valving
Twin Tube Construction. DOM Tubing Reduces Internal Wear For Longer Product Life
Bonded Iron Piston For Durability And Longer Shock Life
Chromed Piston Rod Features Micro Polished Shaft For Improved Product Life And Performance
Orifice Disk For Axle Control In Any Condition
Red Polyurethane Bushings

from

$85.99

150 PSI Pressurized Nitrogen Gas
Multi Stage Velocity Sensitive Valving
Twin Tube Construction. DOM Tubing Reduces Internal Wear For Longer Product Life
Bonded Iron Piston For Durability And Longer Shock Life
Chromed Piston Rod Features Micro Polished Shaft For Improved Product Life And Performance
Orifice Disk For Axle Control In Any Condition
Red Polyurethane Bushings

from

$90.99

Featuring a unique, exclusive valving system and advanced compression functionality, Rancho RS5000X shocks deliver improved overall on- and off-road handling and performance.

Product Features:

IMPROVED HANDLING AND PERFORMANCE – Cross Tuned technology featuring exclusive rebound valving system and advanced compression phase improves overall handling and performance on and off road
MINIMIZES ROUGH RIDE – Exclusive Progressive Engagement Valving is custom-tuned for each vehicle to help reduce initial impacts at low speeds and minimizes a rough ride
STRONG AND DURABLE – Features a 16mm nitro-carburized piston rod to resist scuffs & corrosion, double-welded loops at stress areas, 35mm sintered iron piston for enhanced structural integrity and polyvinyl protective boot
HANDLES EXTREME TEMPERATURE CHANGES – Large twin-tube body filled with all-weather fluid allows for cooler operation, increased vehicle control and ability to withstand internal temperatures of -40 to 248 Deg. F
SMOOTH PERFORMANCE – Polyurethane rebound bumper and rubber bushings help absorb ride harshness while the fluon-banded piston enhances responsiveness to changing road conditions for an overall smoother ride
REDUCES FADE – Nitrogen gas pressurized to 150 PSI to minimize air-to-oil mixture to reduce damping performance fade and foaming
MAINTAINS VEHICLE CONTROL – Compression Control Valve is custom-tuned for each vehicle to regulate fluid transfer to absorb impacts without disc flutter and help maintain shock motion control
BUILT TO LAST – Low-friction, self-lubricating seal retains gas and oil for quicker rebound and smoother compression while the application-specific piston delivers heightened control of shock motion due to the expanded piston area
BUY WITH CONFIDENCE – Comes with Rancho’s Limited Warranty

from

$71.99

HYDRO H7000 series shocks are recommended for multiple shock applications and mild to moderate off-road use. Skyjacker(R) hydro shocks, Skyjacker(R) suspensions offers you a high quality shock absorber with true velocity sensitive valving. Shock absorbers, or spring dampers as it is called everywhere else except in the U.S, control the rate at which suspension springs compress and rebound. As the shock is pushed together, this is called bump or compression. As the shock expands, this is called rebound or extension. Absorbing the shock of bumps and suspension loading is actually performed by the springs in the suspension. The shock real job is controlling the energy stored in the springs. The performance specific internal components of Skyjacker shocks respond to the on- and off-road conditions instantly. Whether you are going over rough or smooth terrain at slow or fast speeds, the true velocity sensitive valving produces a stable, controlled level of resistance for better handling, improved stability, and maximum comfort. The technological innovations of these durable, long lasting shocks from Skyjacker(R) deliver a noticeable advantage over the original equipment and other shock dampeners. Skyjacker shock absorbers deliver a safe, comfortable ride with improved handling and stability. They keep the tires in contact with the terrain and put you in control of the road ahead

Product Features:

Hydraulic Action. Leak Proof Seal Prevents Hydraulic Fluid From Passing Around Piston Head For A Consistent And Reliable Ride
Multi Stage Velocity Sensitive Valving
Twin Tube Construction. DOM Tubing Reduces Internal Wear For Longer Product Life
Bonded Iron Piston For Durability And Longer Shock Life
Chromed Piston Rod Features Micro Polished Shaft For Improved Product Life And Performance
Orifice Disk For Axle Control In Any Condition
Red Polyurethane Bushings

from

$71.99

Hydraulic Action. Leak Proof Seal Prevents Hydraulic Fluid From Passing Around Piston Head For A Consistent And Reliable Ride
Multi Stage Velocity Sensitive Valving
Twin Tube Construction. DOM Tubing Reduces Internal Wear For Longer Product Life
Bonded Iron Piston For Durability And Longer Shock Life
Chromed Piston Rod Features Micro Polished Shaft For Improved Product Life And Performance
Orifice Disk For Axle Control In Any Condition
Red Polyurethane Bushings

Top-Rated Suspension Parts Brands For Your 1970 GMC Jimmy

Shop for the best-rated brands offering Suspension Parts and other products for your 1970 GMC Jimmies. Below you’ll find some of our best rated Suspension Parts from Moog, Monroe, and Rancho, and more. Suspension Parts from these brands that fit a 1970 Jimmy start at just $79.99 and are rated as high as 4.5 stars. OEM and aftermarket Suspension Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular Moog 1970 GMC Jimmy Suspension Parts

When it comes to maintaining or upgrading your 1970 GMC Jimmy, using quality Suspension Parts is essential to ensure durability and a perfect fit. Moog ticks all of those boxes. We offer a wide selection of Moog Suspension Parts, specifically designed for the 1970 GMC Jimmy. With over 1 Moog brand Suspension Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $177.99. Plus, with over 1 customer reviews and an average rating of 4.5 stars, you can trust that our Moog Suspension Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $177.99

(1)

Coil Spring Set

“Like the powder coat look great have not installed”

Popular Monroe 1970 GMC Jimmy Suspension Parts

Monroe auto parts is one of the highest quality Suspension Part brands in the market. Any 1970 GMC Jimmy owner should feel confident when installing genuine Monroe parts in their vehicle. To ensure the best fit and performance for your 1970 Jimmy, Advance Auto Parts carries a full inventory of 3 Monroe Suspension Parts. Plus you will be keeping your GMC in peak condition while saving money because prices on these Monroe Suspension Parts range from $79.99 to $89.99, plus, with more than 4 customer reviews and an impressive 4.4 stars average rating, you can be confident the Fram Suspension Parts below will deliver on both quality and value.

from $83.99

(1)

OESpectrum Suspension Shock Absorber

“Such a smooth ride! Glad I bought these”

from $89.99

(2)

Gas-Magnum Suspension Shock Absorber

“Shocks fitted perfectly, the truck now drives like new.”

from $79.99

(1)

Gas-Magnum Outer Suspension Shock Absorber

“great part and price”

FAQs for 1970 GMC Jimmy Suspension Parts

Which Suspension Parts are best-sellers for 1970 GMC Jimmies?

Out of 58 Suspension Parts that fit 1970 GMC Jimmies, the following parts are the top sellers:

Gas-Matic LT Suspension Shock Absorber (5900308) – $43.99
Gas-Matic LT Outer Suspension Shock Absorber (5900334) – $38.99
Suspension Shock Absorber RS5000X (11451103) – $90.99

What’s the price range for 1970 GMC Jimmy Suspension Parts?

Suspension Part prices for the 1970 GMC Jimmy start at $17.99 and go up to $332.99 for the most premium parts.

What’s the average price of a Suspension Part for a 1970 GMC Jimmy?

The average price for Suspension Parts for the 1970 GMC Jimmy is $83.50. Keep in mind the variety of part types within our Suspension Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Suspension Parts for other GMC Jimmy model years?

Yes, we currently carry Suspension Parts for 27 model years of GMC Jimmies between 1971 and 2001. Suspension Parts are bought most frequently for the following model years: 2001, 2000, 1999, 1998, 1997, 1996, 1995, 1991, and 1990.

What are the cheapest Suspension Parts for my 1970 GMC Jimmy?

The cheapest 1970 GMC Jimmy Suspension Parts we carry in stock are:

Spring Bushing (20513121) – $17.99
Shock-Mate Suspension Shock Absorber Bellows (5100009) – $24.99
Shackle Eye Set (22907836) – $25.49
Shackle Eye Set (22907837) – $25.49
Shackle Eye Set (22907841) – $26.99

What are the top-rated Suspension Parts that fit the 1970 GMC Jimmy?

Out of 817 reviews by customers, our 1970 GMC Jimmy Suspension Parts have an average customer rating of . These are some of the highest-rated Suspension Part types for the 1970 GMC Jimmy and their top-rated products:

Coil and Leaf Springs
- Coil Spring Set (20518996) – $177.99
- Load Adjusting Front Suspension Shock Absorber and Coil Spring Assembly (19710807) – $138.99
Shocks and Struts
- Coil Spring Set (20518996) – $177.99
- Load Adjusting Front Suspension Shock Absorber and Coil Spring Assembly (19710807) – $138.99

What types of Suspension Parts do you sell for my 1970 GMC Jimmy?

As of 3/1/26, these are some of the most in-demand types of Suspension Parts for a 1970 GMC Jimmy:

Can I get help with 1970 GMC Jimmy Suspension Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about GMC Suspension Parts and more.

What is your return policy for GMC Jimmy Suspension Parts?

Advance Auto Parts keeps returns simple. For new GMC Jimmy Suspension Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1970 GMC Jimmy Suspension Parts

KAI – Shock Mount Plate (Part No.GMK414372467R)

KAI – Shock Mount Plate (Part No.GMK414372467L)

MOOG – Coil Spring Set (Part No.80994)

MOOG – Coil Spring Set (Part No.6452)

PRT – COMPLETESTRUTASSMBLY (Part No.920918)

Monroe – Load Adjusting Rear Suspension Shock Absorber and Coil Spring Assembly (Part No.58523)

Rancho – RS7MT Suspension Shock Absorber (Part No.RS77112)

Rancho – RS5000 Shock Absorber (Part No.RS5124)

Energy Suspension – Shackle Eye Set (Part No.3.2124G)

MOOG – Leaf Spring Shackle Bushing (Part No.K200897)

MOOG – Coil Spring Set (Part No.6101)

Monroe – Shock-Mate Suspension Shock Absorber Bellows (Part No.SA1997)

MOOG – Leaf Spring Shackle Bushing (Part No.K200802)

Energy Suspension – Leaf Spring Bushing Set (Part No.3.2112R)

Energy Suspension – Leaf Spring Bushing Set (Part No.3.2130G)

Energy Suspension – Leaf Spring Bushing Set (Part No.3.2131G)

Monroe – Shock-Mate Suspension Shock Absorber Bellows (Part No.SA1998)

Dorman – Suspension Leaf Spring (Part No.22-483)

Dorman – Suspension Leaf Spring (Part No.22-1017)

Dorman – Suspension Leaf Spring (Part No.22-403)

Dorman – Suspension Leaf Spring (Part No.22-402HD)

Skyjacker – Hydro Shock W/Red Boot (Part No.H7060)

Rancho – RS5000X Suspension Shock Absorber (Part No.RS55222)

Skyjacker – Nitro Shock W/Red Boot (Part No.N8060)

Monroe – Gas-Matic Suspension Shock Absorber (Part No.59013)

Rancho – RS5000X Suspension Shock Absorber (Part No.RS55123)

Monroe – Gas-Matic Outer Suspension Shock Absorber (Part No.59042)

Skyjacker – Black Max Shock Absorber (Part No.B8571)

MOOG – Coil Spring Set (Part No.6082)

Monroe – Load Adjusting Front Suspension Shock Absorber and Coil Spring Assembly (Part No.58241)

MOOG – Coil Spring Set (Part No.CC603)

MOOG – Coil Spring Set (Part No.6102)

Energy Suspension – Shackle Eye Set (Part No.3.2126R)

Energy Suspension – Shackle Eye Set (Part No.3.2124R)

Rare Parts – Spring Bushing (Part No.RP35984)

Dorman – Suspension Leaf Spring (Part No.22-403)

MOOG – Coil Spring Set (Part No.6101)

PRT – COMPLETESTRUTASSMBLY (Part No.920914)

Carquest Premium – COMPLETESTRUTASSMBLY (Part No.28-920914)

Energy Suspension – Leaf Spring Bushing Set (Part No.3.2131G)

Nolathane – Spring – Bushing Kit – 1.5" Main Eye ID (Part No.REV155.0042)

PRT – COMPLETESTRUTASSMBLY (Part No.920911)

Carquest Premium – COMPLETESTRUTASSMBLY (Part No.28-920911)

Rare Parts – Spring Bushing (Part No.RP35975)

Monroe – Gas-Magnum Suspension Shock Absorber (Part No.34817)

Monroe – OESpectrum Suspension Shock Absorber (Part No.37049)

Monroe – Gas-Magnum Outer Suspension Shock Absorber (Part No.34944)

Monroe – Gas-Matic Suspension Shock Absorber (Part No.59041)

Monroe – Gas-Matic LT Suspension Shock Absorber (Part No.59542)

Monroe – Gas-Matic LT Outer Suspension Shock Absorber (Part No.59571)

Rancho – Suspension Shock Absorber RS5000X (Part No.RS55113)

Monroe – Shock-Mate Suspension Shock Absorber Bellows (Part No.SA1997)

Monroe – Shock-Mate Suspension Shock Absorber Bellows (Part No.SA1998)

Rancho – Suspension Shock Absorber RS5000X (Part No.RS55118)

Monroe – Gas-Magnum Suspension Shock Absorber (Part No.34822)

KYB – Gas Shock (Part No.344068)

Monroe – OESpectrum Outer Suspension Shock Absorber (Part No.37040)

Rancho – Suspension Shock Absorber RS5000X (Part No.RS55112)

Rancho – Suspension Shock Absorber RS5000X (Part No.RS55001)

Monroe – Gas-Matic Outer Suspension Shock Absorber (Part No.59042)

Skyjacker – Hydro Shock W/Red Boot (Part No.H7060)

Rancho – RS5000X Suspension Shock Absorber (Part No.RS55151)

Energy Suspension – Shackle Eye Set (Part No.3.2124G)

Skyjacker – Nitrogen Gas Charged, Limited Lifetime Warranty, Non-Adjustable, Single (Part No.N8041)

Skyjacker – Nitrogen Gas Charged, Limited Lifetime Warranty, Non-Adjustable, Single (Part No.N8023)

Rancho – RS5000X Suspension Shock Absorber (Part No.RS55120)

Skyjacker – Hydraulic, Limited Lifetime Warranty, Non-Adjustable, Includes Dust Boot, Single (Part No.H7012)

Skyjacker – Hydraulic, Limited Lifetime Warranty, Non-Adjustable, Includes Dust Boot, Single (Part No.H7051)