1970 Chevrolet K30 Pickup Differentials

Essential 1970 Chevrolet K30 Pickup Differentials

Yukon Gear – Drive Flange Cap For Dana 44 (Part No.32134)

Drive Flange Cap For Dana 44

from

$109.99
Product Features:
  • Drive flange cap
  • Fits Dana 44
See More

Yukon Gear – Dana 60 & Dana 70 Power Lok Case Bolt (Part No.33236)

Dana 60 & Dana 70 Power Lok Case Bolt

from

$7.99
Dana 60 & Dana 70 Power Lok case bolt.

Product Features:
  • Power Lok case bolt for Dana Spicer 60 and 70
  • 7/16 x 14 thread
  • 3.5″ long
  • 9/16″ hex head
See More

Yukon Gear – Replacement Carrier Shim Kit For Dana 60, 61 & 70U (Part No.55020)

Replacement Carrier Shim Kit For Dana 60, 61 & 70U

from

$104.99
Product Features:
  • Carrier shims for Dana Spicer 60 and 70U
See More

Yukon Gear – Dana 44 JK / 60 / 70U Pinion Nut Washer Replacement (Part No.33164)

Dana 44 JK / 60 / 70U Pinion Nut Washer Replacement

from

$3.99
Product Features:
  • Pinion nut washer for Chrysler 7.25″, 8.25″, 8.75″ with 29 spline pinion, Jeep JK rear, Dana Spicer 60, 70, 70U and 70HD and 2007-2010 Ford 10.5″
See More

Yukon Gear – Pinion Install Kit For Dana 60 Front Differential (Part No.13093)

Pinion Install Kit For Dana 60 Front Differential

from

$319.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:
  • Fits Dana Spicer 60 front
  • Included are pinion bearings and races, pinion seal, crush sleeve , complete pinion shim kit, and marking compound with brush.
See More

Yukon Gear – Crush Sleeve Eliminator Kit For GM 10.5" 14 Bolt Truck (Part No.55067)

Crush Sleeve Eliminator Kit For GM 10.5" 14 Bolt Truck

from

$121.99
Crush sleeve eliminator kit for GM 10.5″ 14 bolt truck. This kit contains a solid spacer & shim kit to eliminate the crush sleeve and set pinion bearing preload.

Product Features:
  • Crush sleeve eliminator kit for GM 10.5″ 14 bolt truck
See More

Yukon Gear – Chrysler 9.25" And Dana 44 / 60 Tracloc Clutch Guide Replacement (Part No.33249)

Chrysler 9.25" And Dana 44 / 60 Tracloc Clutch Guide Replacement

from

$8.99
Product Features:
  • Clutch guide for Chrysler 9.25″, Dana Spicer 44 and Dana Spicer 60
  • For Trac Loc positraction applications only
See More

Yukon Gear – Zip Locker For Dana 60 With 35 Spline Axles, 4.10 & Down (Part No.34022)

Zip Locker For Dana 60 With 35 Spline Axles, 4.10 & Down

from

$1487.99
The Yukon Zip Locker is the latest in on-demand traction. Its air-operated design allows you to switch from an open differential to 100% lockup when you need it, giving you the ultimate in driver selectability. The Yukon Zip locker is an air operated locker that provides selectable traction for off road or street use. This unit features 4320 Chrome Moly internals for added strength. Assembled in the USA! compressor sold separately. All Zip Lockers are backed by the best warranty in the business! All Zip Lockers come with a six (6) year warranty, including any collaterally damaged parts and associated labor, up to $2,000, for the first two (2) years. This is a narrow case locker. If you have a wide housing, please order two DS 42563 with your locker. This locker is ABS compatible.

Product Features:
  • Fits Dana Spicer 60 with 35 spline axles
  • 4.10 and down ratio only
  • Forged case and 8620 internals for added strength
  • Works with a variety of air delivery systems
  • Assembled in the USA
See More

Yukon Gear – Pinion Seal For GM 14T (Part No.30023)

Pinion Seal For GM 14T

from

$19.99
Pinion seal for GM 14T.Yukon Mighty seal.

Product Features:
  • Pinion seal
  • Fits 1998 and down GM 10.5″ 14 bolt truck
See More

Yukon Gear – Set Up Bearing (Part No.56037)

Set Up Bearing

from

$189.99
Set-up carrier bearing (2 bearings, no races) 25590. No return.

Product Features:
  • Set up bearing kit
  • Fits Dana Spicer 44
  • Easily slips on and off carrier journals to allow for easier carrier shim adjustment
See More

Pro-King – Differential Ring Gear Bolt (Part No.744A935)

Differential Ring Gear Bolt

from

$1.89
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

Yukon Gear – Bearing Race Driver Set, 21 Piece (Part No.56030)

Bearing Race Driver Set, 21 Piece

from

$1566.99
21 Piece bearing race driver set. (Box wt: 140lbs) No return.

Product Features:
  • Bearing race driver set
  • 21 pieces
  • All steel construction
See More

National – Bearings (Part No.02820)

Bearings

from

$9.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

National – Bearings (Part No.HM88610)

Bearings

from

$15.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Yukon Gear – Zip Locker Install Kit (Part No.34026)

Zip Locker Install Kit

from

$249.99
Product Features:
  • Installation kit
  • Includes o-ring for bulkhead fitting, bulkhead fitting, outer fitting, switch, front and rear switch cover, solenoid, zip ties and 20′ air line
See More

FAG US – CUP (Part No.M802011)

CUP

from

$15.29
CUP

Yukon Gear – Chrome Cover For 10.5" GM 14 Bolt Truck (Part No.32013)

Chrome Cover For 10.5" GM 14 Bolt Truck

from

$59.99
Chrome cover for GM 14T.

Product Features:
  • Fits GM 10.5″ 14 bolt truck
  • Chrome
See More

Motive Gear – Differential Carrier Gear Kit (Part No.GM14BI)

Differential Carrier Gear Kit

from

$266.99


Product Features:
  • GM10.5″ INTERNAL KIT (OPEN) 30 SPL
See More

Dorman – Differential Pinion Yoke Assembly (Part No.697-545)

Differential Pinion Yoke Assembly

from

$313.99
Worn or damaged differential end yoke causing driveline vibrations? This direct replacement end yoke matches the original equipment part for a trustworthy repair and reliable performance.

Product Features:
  • Direct replacement – this differential end yoke matches the fit and construction of the original yoke.
  • Excellent value – this replacement end yoke offers original equipment quality at a fraction of the price of dealer parts.
  • Quality materials – this end yoke is machined from cast iron for strength and is precision machined for reliability
  • Validated fit – this differential end yoke has been tested to confirm accurate fit
See More

Yukon Gear – Extra-Large Clamshells For Large Applciations (Part No.56059)

Extra-Large Clamshells For Large Applciations

from

$209.99
Extra large clamshells for use with Dana 70HD, Dana 80, AAM 11.5″, Ford 9.75″, Ford 10.25″ & Ford 10.5″.

Product Features:
  • Extra Large clamshell
  • Fits carrier bearing puller
See More

Yukon Gear – O-Ring For Dana 60 Zip Locker Seal Housing (Part No.34006)

O-Ring For Dana 60 Zip Locker Seal Housing

from

$11.29
Product Features:
  • O-ring for seal housing
  • Fits Dana Spicer 60
See More

Yukon Gear – Dana 44 Pinion Gear Thrust Washer (Part No.33281)

Dana 44 Pinion Gear Thrust Washer

from

$4.99
Dana 44, GM55P & 8.2″ GM pinion gear Thrust washer.

Product Features:
  • Pinion gear thrust washer for Dana Spicer 44, GM 8.2″ and 1955-1964 GM passenger car
See More

USA Standard Gear – Steel Spool For Dana 60 With 30 Spline Axles, 4.10 & Down (Part No.59014)

Steel Spool For Dana 60 With 30 Spline Axles, 4.10 & Down

from

$484.99
USA Standard ring & pinion sets are the right choice to add confidence to your install. USA Standard Gear offers a full line of ring & pinion sets for a variety of common & hard to find applications. USA standard gear offers a standard one year warranty against defects on their ring & pinion sets.

Product Features:
  • Fits GM 9.25″ front
  • 9.25″ ring gear
  • 30 spline pinion
  • 12 ring gear bolts
  • 4.11 ratio
See More

Felpro – DIFFERENTIAL GASKET (Part No.RDS 6095-1)

DIFFERENTIAL GASKET

from

$8.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Yukon Gear – Dana 25, 27, 30, 44, Model 20 And Model 35, GM 7.5", 8.2", 8.5", 12P, 12T, C9.25 Rear Cover Bolt (Part No.33286)

Dana 25, 27, 30, 44, Model 20 And Model 35, GM 7.5", 8.2", 8.5", 12P, 12T, C9.25 Rear Cover Bolt

from

$9.99
5/16″-18 cover bolt, Dana Spicer 25, 27, 30 and 44, AMC Model 20 and Model 35, Chrysler 9.25 rear, GM 7.5″, 7.625″, 8.2″, 8.5″, 12 bolt passenger car and truck.

Product Features:
  • Cover bolt for Dana Spicer 25, 27, 30 and 44, AMC Model 20 and Model 35, GM 7.5″, 7.625″, 8.2″, 8.5″ and 12 bolt passenger car and truck.
  • 1/2″ head
See More

Yukon Gear – Pinion Depth Shims For 10.5" GM 14 Bolt Truck (Part No.55058)

Pinion Depth Shims For 10.5" GM 14 Bolt Truck

from

$37.99
14T GM pinion shim kit.

Product Features:
  • Pinion depth shims for GM 10.5″ 14 bolt truck
See More

Powertrax – No-Slip Traction System (Part No.9207053000)

No-Slip Traction System

from

$591.99
For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.
  • Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles.
  • Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction.
  • Powertrax® = Extreme Traction Systems!
  • See More

    Yukon Gear – Powr Lok Flat Driven Plate For Dana 44 (Part No.16173)

    Powr Lok Flat Driven Plate For Dana 44

    from

    $31.99
    Product Features:
    • Driven plate
    • Fits Dana Spicer 44 Powr Lok
    See More

    1970 Chevrolet K30 Pickup Differentials

    Maybe you’re in the middle of a full rebuild of that 1970 Chevrolet K30 Pickup. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 207 different Differentials in our inventory ranging from $3.99 to $1,566.99. That means you can find the exact parts or products you need to keep that 1970 Chevrolet K30 Pickup running smoothly.

    Differentials are only as good as their brand. We stock 11 different brands to make sure you have plenty of trusted parts to choose from for your 1970 Chevrolet K30 Pickup. Yukon Gear, National, and FELPRO are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

    We know you’ll find the perfect Differentials for your 1970 Chevrolet K30 Pickup, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 259 reviews in this category, some of the top rated parts include Tapered Roller Bearing with 5.0 stars and Oil Seal with 4.3 stars.

    So if you’re in the market for aftermarket Differentials to keep your 1970 Chevrolet K30 Pickup rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

    Differentials Brands To Make Your 1970 Chevrolet K30 Pickup Last

    Simple repair, complete replacement, or a full rebuild. No matter the job, your 1970 Chevrolet K30 Pickup demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your K30 Pickup the best it can be. Be sure to browse some of our top Differentials brands and parts.

    Popular National Differentials

    We carry National parts in our stock across Differential Pinion Pilot Bearings and Front Differential Pinion Bearings categories, plus more. For a 1970 Chevrolet K30 Pickup, our most popular National Differentials include:
    Shaft Repair Sleeve
    from $43.99
    (2)
    Shaft Repair Sleeve
    Differential Pinion Pilot Bearings
    Bearings
    from $372.99
    (1)
    Bearings
    Front Differential Pinion Bearings
    Taper Bearing Cup
    from $10.99
    (1)
    Taper Bearing Cup
    Differential Bearings

    Top 1970 Chevrolet K30 Pickup Differentials from National

    National products are another trusted brand when it comes to Differentials for your 1970 Chevrolet K30 Pickup. Popular National parts include:
    Bearings
    from $9.99
    (8)
    Bearings
    Rear Differential Pinion Bearings
    Multi Purpose Seal
    from $23.29
    (4)
    Multi Purpose Seal
    Differential Pinion Seals

    FAQs for 1970 Chevrolet K30 Pickup Differentials

    What are the most purchased Differentials for the 1970 Chevrolet K30 Pickup?

    Out of 207 Differentials for the 1970 Chevrolet K30 Pickup, the most popular in our inventory are:
    3 Qt - 80W90 Conventional Gear Oil With Posi Additive
    from $57.99
    This product is not rated
    3 Qt – 80W90 Conventional Gear Oil With Posi Additive
    Differential Oil
    Axle Housing Cover Gasket
    from $6.49
    (10)
    Axle Housing Cover Gasket
    Rear Housing Cover Gaskets
    Replacement Ring Gear Bolt For Model 35, Dana 25, 27, 30 & 44 - 3/8" X 24
    from $11.99
    This product is not rated
    Replacement Ring Gear Bolt For Model 35, Dana 25, 27, 30 & 44 – 3/8" X 24
    Differential Ring Gear Bolts

    What are the top-rated 1970 Chevrolet K30 Pickup Differentials?

    Top-rated Differentials for your 1970 Chevrolet K30 Pickup based on customer reviews/ratings are:
    Tapered Roller Bearing
    from $8.49
    (7)
    Tapered Roller Bearing
    “Nice to find them in stock. Fit well and got my SUV up and back on the road quickly”
    Oil Seal
    from $10.49
    (3)
    Oil Seal
    “Fit the rear Dana 44 on my TJ just fine and stopped the leaking.”
    Differential Ring and Pinion
    from $245.99
    (1)
    Differential Ring and Pinion
    “You get a good set of gears for a good price. Found same set other places for a lot more money. Would recommend this .”