1970 Chevrolet C10 Pickup Coil and Leaf Springs

Essential 1970 Chevrolet C10 Pickup Coil and Leaf Springs

MOOG – Coil Spring Set (Part No.6452)

Coil Spring Set

from

$165.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • 100% Load tested
  • Easy to install
  • Provides like-new steering
  • Designed to lower stresses for longer service life
  • Worn or sagging coil springs can cause premature tire wear due to vehicle misalignment
See More

MOOG – Coil Spring Set (Part No.6082)

Coil Spring Set

from

$175.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • 100% Load tested
  • Easy to install
  • Provides like-new steering
  • Designed to lower stresses for longer service life
  • Worn or sagging coil springs can cause premature tire wear due to vehicle misalignment
See More

MOOG – Coil Spring Set (Part No.6454)

Coil Spring Set

from

$183.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • 100% Load tested
  • Easy to install
  • Provides like-new steering
  • Designed to lower stresses for longer service life
  • Worn or sagging coil springs can cause premature tire wear due to vehicle misalignment
See More

Belltech – 6"Rear Drop, With C-Notch Frame Brackets/Spring Seats/U Bolts/Bump Stop/Hardware (Part No.6850)

6"Rear Drop, With C-Notch Frame Brackets/Spring Seats/U Bolts/Bump Stop/Hardware

from

$386.99
Belltech flip kits are the leading standard in the industry. When a mild drop is just not enough, Belltech can bring the heat. Belltech flip kits provide dramatic Lowering on the rear of your sport truck or SUV by relocating the rear axle of your truck from under to on top of the Leaf Spring.

Product Features:
  • Belltech Flip Kits Provide Dramatic Lowering On The Rear Of Your Sport Truck Or SUV By Relocating The Rear Axle Of Your Truck From Under To On Top Of The Leaf Spring
  • Kits Are Bulletproof Over Engineered Frame Modification And Reinforcement Systems That Allow For Additional Compression Or Upward Travel Of Your Rear Suspension, Essential In Limiting Bottoming Out
  • All Belltech C-Section Kits Are Manufactured With Heavy Duty Stamped Steel Contoured To Match The Factory Frame Rails
  • All Kits Feature A Durable Powder Coat Finish And The Highest Quality Hardware Using Grade 8 Fasteners
  • Belltech C-Sections Are Designed To Increase Overall Suspension Travel On Vehicles Utilizing Lowering Kits That Create Limited Rear Axle Travel
See More

Rare Parts – Spring Bushing (Part No.RP35207)

Spring Bushing

from

$34.49
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Rubber or Heat Treated bushings
  • No Squeak
  • Reduces vibration
See More

MOOG – Leaf Spring Shackle Bushing (Part No.SB335)

Leaf Spring Shackle Bushing

from

$29.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Easy to install
  • Restores like-new steering and handling
  • Engineered to provide long life and dependability
  • Construction and design validated by MOOG engineers
  • Incorporates proven design and engineering features
See More

MOOG – Leaf Spring Bushing (Part No.SB253)

Leaf Spring Bushing

from

$22.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Easy to install
  • Restores like-new steering and handling
  • Engineered to provide long life and dependability
  • Construction and design validated by MOOG engineers
  • Incorporates proven design and engineering features
See More

MOOG – Leaf Spring Bushing (Part No.SB319)

Leaf Spring Bushing

from

$18.79
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Easy to install
  • Restores like-new steering and handling
  • Engineered to provide long life and dependability
  • Construction and design validated by MOOG engineers
  • Incorporates proven design and engineering features
See More

Rare Parts – Spring Bushing (Part No.RP35984)

Spring Bushing

from

$16.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Rubber or Heat Treated bushings
  • No Squeak
  • Reduces vibration
See More

Energy Suspension – Leaf Spring Bushing Set (Part No.3.2106R)

Leaf Spring Bushing Set

from

$68.99
Adds a dramatic amount of performance and durability to any vehicle, cars, trucks and SUVs. Helps the vehicle be in control – when maneuvering through turns, during standing start accelerations, braking, even over bumps and berms. Made of Energy’s Hyper-Flex performance polyurethane which lasts 5 -10 times longer than conventional rubber components.

Product Features:
  • Made of Superior Hyper-Flex+ Material
  • Adds Dramatic Amount of Performance/Durability
  • Helps Vehicle Be in Control
  • Allows the Suspension to Function Properly
See More

Monroe – Load Adjusting Shock Absorber (Part No.58527)

Load Adjusting Shock Absorber

from

$123.99
Ideal for light trucks that that tow or carry varying loads, Monroe load adjusting shocks include a heavy gauge calibrated spring that adjusts to road and weight conditions to provide extra control when operating conditions get more demanding.

Product Features:
  • REDUCES SAG UNDER LOAD — Ideal for occasionally hauling or towing varying loads, heavy gauge, calibrated coil spring reduces sag when loaded up to 1,200 lbs. (capacity limited by suspension, tires and transmission, see owner’s manual)
  • EXCEPTIONAL HANDLING — Tuned specifically for each application, full-displaced valving automatically adjusts to road extremes to provide ride consistency
  • CONSISTENT RIDE — OE all-weather fluid contains special modifiers to handle extreme temperatures and PTFE-banded piston helps reduce friction between the piston and pressure tube to enhance responsiveness to changing road surfaces
  • LONGER SERVICE LIFE — Self-lubricating fluid seal retains gas and reduces excessive friction against the piston rod to help reduce premature wear while heavy-duty nitrocarburized rod delivers long life
  • IMPROVES PERFORMANCE — Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
  • Nitrogen Gas Charged: For Improved Ride & Handling, Helps Maintain Tire To Road Contact By Reducing Aeration – On Most Applications
  • 5/8 nitrocarburized rod for long service life.
  • Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.
See More

Monroe – Load Adjusting Shock Absorber (Part No.58567)

Load Adjusting Shock Absorber

from

$125.99
Ideal for light trucks that that tow or carry varying loads, Monroe load adjusting shocks include a heavy gauge calibrated spring that adjusts to road and weight conditions to provide extra control when operating conditions get more demanding.

Product Features:
  • REDUCES SAG UNDER LOAD — Ideal for occasionally hauling or towing varying loads, heavy gauge, calibrated coil spring reduces sag when loaded up to 1,200 lbs. (capacity limited by suspension, tires and transmission, see owner’s manual)
  • EXCEPTIONAL HANDLING — Tuned specifically for each application, full-displaced valving automatically adjusts to road extremes to provide ride consistency
  • CONSISTENT RIDE — OE all-weather fluid contains special modifiers to handle extreme temperatures and PTFE-banded piston helps reduce friction between the piston and pressure tube to enhance responsiveness to changing road surfaces
  • LONGER SERVICE LIFE — Self-lubricating fluid seal retains gas and reduces excessive friction against the piston rod to help reduce premature wear while heavy-duty nitrocarburized rod delivers long life
  • IMPROVES PERFORMANCE — Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
  • Nitrogen Gas Charged: For Improved Ride & Handling, Helps Maintain Tire To Road Contact By Reducing Aeration – On Most Applications
  • 5/8 nitrocarburized rod for long service life.
  • Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.
See More

Monroe – Load Adjusting Shock Absorber (Part No.58241)

Load Adjusting Shock Absorber

from

$105.99
Ideal for light trucks that that tow or carry varying loads, Monroe load adjusting shocks include a heavy gauge calibrated spring that adjusts to road and weight conditions to provide extra control when operating conditions get more demanding.

Product Features:
  • REDUCES SAG UNDER LOAD — Ideal for occasionally hauling or towing varying loads, heavy gauge, calibrated coil spring reduces sag when loaded up to 1,200 lbs. (capacity limited by suspension, tires and transmission, see owner’s manual)
  • EXCEPTIONAL HANDLING — Tuned specifically for each application, full-displaced valving automatically adjusts to road extremes to provide ride consistency
  • CONSISTENT RIDE — OE all-weather fluid contains special modifiers to handle extreme temperatures and PTFE-banded piston helps reduce friction between the piston and pressure tube to enhance responsiveness to changing road surfaces
  • LONGER SERVICE LIFE — Self-lubricating fluid seal retains gas and reduces excessive friction against the piston rod to help reduce premature wear while heavy-duty nitrocarburized rod delivers long life
  • IMPROVES PERFORMANCE — Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
  • Nitrogen Gas Charged: For Improved Ride & Handling, Helps Maintain Tire To Road Contact By Reducing Aeration – On Most Applications
  • 5/8 nitrocarburized rod for long service life.
  • Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.
See More

Monroe – Load Adjusting Shock Absorber (Part No.58578)

Load Adjusting Shock Absorber

from

$173.99
Ideal for light trucks that that tow or carry varying loads, Monroe load adjusting shocks include a heavy gauge calibrated spring that adjusts to road and weight conditions to provide extra control when operating conditions get more demanding.

Product Features:
  • REDUCES SAG UNDER LOAD — Ideal for occasionally hauling or towing varying loads, heavy gauge, calibrated coil spring reduces sag when loaded up to 1,200 lbs. (capacity limited by suspension, tires and transmission, see owner’s manual)
  • EXCEPTIONAL HANDLING — Tuned specifically for each application, full-displaced valving automatically adjusts to road extremes to provide ride consistency
  • CONSISTENT RIDE — OE all-weather fluid contains special modifiers to handle extreme temperatures and PTFE-banded piston helps reduce friction between the piston and pressure tube to enhance responsiveness to changing road surfaces
  • LONGER SERVICE LIFE — Self-lubricating fluid seal retains gas and reduces excessive friction against the piston rod to help reduce premature wear while heavy-duty nitrocarburized rod delivers long life
  • IMPROVES PERFORMANCE — Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
  • Nitrogen Gas Charged: For Improved Ride & Handling, Helps Maintain Tire To Road Contact By Reducing Aeration – On Most Applications
  • 5/8 nitrocarburized rod for long service life.
  • Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.
See More

MOOG – Coil Spring Set (Part No.6101)

Coil Spring Set

from

$172.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • 100% Load tested
  • Easy to install
  • Provides like-new steering
  • Designed to lower stresses for longer service life
  • Worn or sagging coil springs can cause premature tire wear due to vehicle misalignment
See More

1970 Chevrolet C10 Pickup Coil and Leaf Springs

Maybe you’re in the middle of a full rebuild of that 1970 Chevrolet C10 Pickup. Maybe you just need a couple of Coil and Leaf Springs. Either way, Advance Auto Parts has 7 different Coil and Leaf Springs in our inventory ranging from $18.79 to $175.99. That means you can find the exact parts or products you need to keep that 1970 Chevrolet C10 Pickup running smoothly.

Coil and Leaf Springs are only as good as their brand. We stock 3 different brands to make sure you have plenty of trusted parts to choose from for your 1970 Chevrolet C10 Pickup. Monroe, Rare, and Moog are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Coil and Leaf Springs for your 1970 Chevrolet C10 Pickup, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.

So if you’re in the market for aftermarket Coil and Leaf Springs to keep your 1970 Chevrolet C10 Pickup rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Coil and Leaf Springs Brands To Make Your 1970 Chevrolet C10 Pickup Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1970 Chevrolet C10 Pickup demands trusted brand parts and products to keep it running. Many trusted brands of Coil and Leaf Springs make up Advance Auto Parts’ inventory, and all are ready to help make your C10 Pickup the best it can be. Be sure to browse some of our top Coil and Leaf Springs brands and parts.

Popular MOOG Coil and Leaf Springs

We carry MOOG parts in our stock across Coil Spring Sets categories, plus more. For a 1970 Chevrolet C10 Pickup, our most popular MOOG Coil and Leaf Springs include:
Coil Spring Set
from $175.99
(1)
Coil Spring Set
Coil Spring Sets

Top 1970 Chevrolet C10 Pickup Coil and Leaf Springs from Monroe

Monroe products are another trusted brand when it comes to Coil and Leaf Springs for your 1970 Chevrolet C10 Pickup. Popular Monroe parts include:
Load Adjusting Shock Absorber
from $123.99
(1)
Load Adjusting Shock Absorber
Shock Absorber and Coil Spring Assemblies
Load Adjusting Shock Absorber
from $105.99
(1)
Load Adjusting Shock Absorber
Shock Absorber and Coil Spring Assemblies

FAQs for 1970 Chevrolet C10 Pickup Coil and Leaf Springs

What are the most purchased Coil and Leaf Springs for the 1970 Chevrolet C10 Pickup?

Out of 7 Coil and Leaf Springs for the 1970 Chevrolet C10 Pickup, the most popular in our inventory are:
Spring Bushing
from $34.49
This product is not rated
Spring Bushing
Leaf Spring Bushings
Leaf Spring Bushing
from $18.79
This product is not rated
Leaf Spring Bushing
Leaf Spring Bushings
Load Adjusting Shock Absorber
from $125.99
This product is not rated
Load Adjusting Shock Absorber
Shock Absorber and Coil Spring Assemblies