1969 Toyota Land Cruiser Alternators and Starters
Find Your Specific 1969 Toyota Land Cruiser Alternators and Starters
Below you will find various in-demand Toyota Alternators and Starters, components and accessories for your 1969 Land Cruiser. Advance Auto Parts has popular Land Cruiser parts like Starter Parts Alternator Parts and more. You’ll also find aftermarket and OEM Alternators and Starters for other Land Cruiser model years including
2013,
2014,
2015,
2016,
2017,
2018,
2019,
2020,
2021 and more. Select a category of 1969 Toyota Land Cruiser Alternators and Starters below and start saving instantly.
Popular 1969 Toyota Land Cruiser Alternators and Starters Categories
Essential Alternators and Starters for 1969 Toyota Land Cruisers
Carquest Premium – Starter Solenoid (Part No.SBC2261)
from
$38.99
The starting system consists of the rotating electrical motor and solenoid which may be mounted on the starter motor or mounted remotely. The electric motor drives a gear which engages with the engine’s flywheel located at the rear of the motor, when the motor is energized, the motor will turn the engines crankshaft. The starter solenoid is an electric relay, or switch used to provide power to the starter motor or any electrical device that requires high amperage to operate. A low amperage wire winding within the solenoid will create magnetic force when voltage is applies from a remote switch, such as the ignition switch or another type of remote mounted switch. The contacts within the relay carry a high amperage load to run an electric motor or some other type of high load circuit.
Product Features:
See More
Product Features:
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Carquest Premium – Starter Solenoid (Part No.SAE5073)
from
$103.99
The starting system consists of the rotating electrical motor and solenoid which may be mounted on the starter motor or mounted remotely. The electric motor drives a gear which engages with the engine’s flywheel located at the rear of the motor, when the motor is energized, the motor will turn the engines crankshaft. The starter solenoid is an electric relay, or switch used to provide power to the starter motor or any electrical device that requires high amperage to operate. A low amperage wire winding within the solenoid will create magnetic force when voltage is applies from a remote switch, such as the ignition switch or another type of remote mounted switch. The contacts within the relay carry a high amperage load to run an electric motor or some other type of high load circuit.
Product Features:
See More
Product Features:
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Carquest Premium – Starter Solenoid (Part No.SBE1793)
from
$65.99
The starting system consists of the rotating electrical motor and solenoid which may be mounted on the starter motor or mounted remotely. The electric motor drives a gear which engages with the engine’s flywheel located at the rear of the motor, when the motor is energized, the motor will turn the engines crankshaft. The starter solenoid is an electric relay, or switch used to provide power to the starter motor or any electrical device that requires high amperage to operate. A low amperage wire winding within the solenoid will create magnetic force when voltage is applies from a remote switch, such as the ignition switch or another type of remote mounted switch. The contacts within the relay carry a high amperage load to run an electric motor or some other type of high load circuit.
Product Features:
See More
Product Features:
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Carquest Premium – Starter Solenoid (Part No.SBC2292)
from
$100.99
The starting system consists of the rotating electrical motor and solenoid which may be mounted on the starter motor or mounted remotely. The electric motor drives a gear which engages with the engine’s flywheel located at the rear of the motor, when the motor is energized, the motor will turn the engines crankshaft. The starter solenoid is an electric relay, or switch used to provide power to the starter motor or any electrical device that requires high amperage to operate. A low amperage wire winding within the solenoid will create magnetic force when voltage is applies from a remote switch, such as the ignition switch or another type of remote mounted switch. The contacts within the relay carry a high amperage load to run an electric motor or some other type of high load circuit.
Product Features:
See More
Product Features:
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
National – Multi-Purpose Bearing (Part No.302-CC)
from
$40.99
Product Features:
See More
- BUILT TO LAST: Advanced heat treatment process for strength
- PREMIUM MATERIALS: Precision manufactured using premium-grade steel for lasting performance and extended bearing life
- RELIABLE PERFORMANCE: Element size and quantity are engineered to meet or exceed the load rating of OE bearings
- COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on
National – Multi-Purpose Bearing (Part No.203)
from
$19.49
Product Features:
See More
- BUILT TO LAST: Advanced heat treatment process for strength
- PREMIUM MATERIALS: Precision manufactured using premium-grade steel for lasting performance and extended bearing life
- RELIABLE PERFORMANCE: Element size and quantity are engineered to meet or exceed the load rating of OE bearings
- COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on
National – Multi-Purpose Bearing (Part No.203-S)
from
$21.49
Product Features:
See More
- BUILT TO LAST: Advanced heat treatment process for strength
- PREMIUM MATERIALS: Precision manufactured using premium-grade steel for lasting performance and extended bearing life
- RELIABLE PERFORMANCE: Element size and quantity are engineered to meet or exceed the load rating of OE bearings
- COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on
FAG US – Bearing – DGBB (Deep Groove Ball Bearing) (Part No.6202-2Z)
from
$16.29
We develop and produce high-quality roller bearings, spherical bearings, and plain bearings worldwide for a wide range of applications.
Product Features:
See More
Product Features:
- Radial Ball Bearing, Both Sides Shield.
- Coverage of classic and new high-tech solutions for the best system coverage
Carquest Premium – Starter Brush (Part No.XAA1145)
from
$6.99
The starting system consists of the rotating electrical motor and solenoid which may be mounted on the starter motor or mounted remotely. The electric motor drives a gear which engages with the engine’s flywheel located at the rear of the motor, when the motor is energized, the motor will turn the engines crankshaft. Individual motor components are available to service any failed part within the motor such as brushes, bushings, and starter drive unit.
Product Features:
See More
Product Features:
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Carquest Premium – Starter Bushing (Part No.SBA5524)
from
$2.29
The starting system consists of the rotating electrical motor and solenoid which may be mounted on the starter motor or mounted remotely. The electric motor drives a gear which engages with the engine’s flywheel located at the rear of the motor, when the motor is energized, the motor will turn the engines crankshaft. Individual motor components are available to service any failed part within the motor such as brushes, bushings, and starter drive unit.
Product Features:
See More
Product Features:
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Carquest Premium – Starter Bushing (Part No.SBA5224)
from
$2.49
The starting system consists of the rotating electrical motor and solenoid which may be mounted on the starter motor or mounted remotely. The electric motor drives a gear which engages with the engine’s flywheel located at the rear of the motor, when the motor is energized, the motor will turn the engines crankshaft. Individual motor components are available to service any failed part within the motor such as brushes, bushings, and starter drive unit.
Product Features:
See More
Product Features:
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
WAI – Starter: 1.0kW/12 Volt, CW, 9-Tooth Pinion (Part No.16828N)
from
$161.99
Product Features:
See More
- Engineered to meet or exceed OEM specifications for a perfect fit and hassle-free installation.
- Premium grade solenoids contains materials specifically selected for best conductivity. High temperature cap ensures that the solenoid works flawlessly in high heat environments. High dielectric strength outer case resists shorting.
- Armatures have precision machined and upgraded steel shaft for improved durability and performance.
- Each unit includes a printed copy of the test results so you know exactly what to expect from our parts right from the first time they power on.
Carquest Professional – Starter: New, Limited Lifetime Warranty (Part No.17748SN)
from
$169.99
Carquest Professional starters are 100% new units that are built to meet or exceed original equipment (O.E.) specifications. Our new starters are engineered and built by an IATF/TS 16949 certified supplier that meets the highest standards achievable. Carquest Professional starters are re-engineered to include improvements and enhancements (where applicable) to the OE design to extend longevity and service life. Our new starters are built with all new components and are 100% triple-tested to ensure high quality that is backed by an industry-leading warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.
Product Features:
See More
Product Features:
- Designed to meet or exceed OE specifications for fit, form and function
- Manufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
- Housings are 100% new with dimensions computer gauged and measured to ensure proper fitment
- All new components are utilized to ensure long service life
- Internal electronics are upgraded for heavy duty reliability (where applicable)
- Armatures and commutators are 100% load tested
- Application-specific technical bulletins included where applicable
- All units are 100% triple tested to ensure quality and performance
- Technical support team staffed with ASE Certified Technicians: 1-800-228-9672
Product Features:
Bosch – Starter: Remanufactured (Part No.SR3296X)
from
$481.99
Product Features:
See More
- Engineered for top-tier performance and reliability, ensuring dependable ignition system operation.
- Designed with a 9-tooth configuration for precise engagement and smooth functionality.
- Operates at 12 VDC to deliver consistent power, meeting the demands of modern vehicles.
- Remanufactured to Bosch’s high standards, undergoing rigorous testing for durability and long-lasting performance.
Carquest Premium – Starter: Remanufactured, Limited Lifetime Warranty (Part No.19209S)
from
$447.99
Product Features:
See More
- Designed to meet or exceed OE specifications for fit, form and function
- Remanufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
- 100% remanufactured drive clutch assembly ensures lasting performance
- Armatures and commutators are 100% load tested
- New motor lead terminals and solenoid contacts are used to ensure maximum connectivity
- Application-specific technical bulletins included where applicable
- All units are 100% triple tested to ensure quality and performance
- Technical support team staffed with ASE Certified Technicians: 1-800-228-9672
WAI – Starter: 2.0kW/12 Volt, CW, 9-Tooth Pinion (Part No.19045N)
from
$249.99
Product Features:
See More
- Engineered to meet or exceed OEM specifications for a perfect fit and hassle-free installation.
- Premium grade solenoids contains materials specifically selected for best conductivity. High temperature cap ensures that the solenoid works flawlessly in high heat environments. High dielectric strength outer case resists shorting.
- Armatures have precision machined and upgraded steel shaft for improved durability and performance.
- Each unit includes a printed copy of the test results so you know exactly what to expect from our parts right from the first time they power on.
National – Multi-Purpose Bearing (Part No.304-DD)
from
$73.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- BUILT TO LAST — Advanced heat treatment process for strength
- PREMIUM MATERIALS — Precision manufactured using premium-grade steel for lasting performance and extended bearing life
- RELIABLE PERFORMANCE — Element size and quantity are engineered to meet or exceed the load rating of OE bearings
- COMPREHENSIVE COVERAGE — Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by National engineers for quality you can count on
Driveworks – Ball Bearing (Part No.S-201-CC)
from
$2.99
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
National – Multi-Purpose Bearing (Part No.202-SS)
from
$19.99
Product Features:
See More
- BUILT TO LAST: Advanced heat treatment process for strength
- PREMIUM MATERIALS: Precision manufactured using premium-grade steel for lasting performance and extended bearing life
- RELIABLE PERFORMANCE: Element size and quantity are engineered to meet or exceed the load rating of OE bearings
- COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on
National – Multi-Purpose Bearing (Part No.201-SS)
from
$18.49
Product Features:
See More
- BUILT TO LAST: Advanced heat treatment process for strength
- PREMIUM MATERIALS: Precision manufactured using premium-grade steel for lasting performance and extended bearing life
- RELIABLE PERFORMANCE: Element size and quantity are engineered to meet or exceed the load rating of OE bearings
- COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on
National – Multi-Purpose Bearing (Part No.201-S)
from
$21.79
Product Features:
See More
- BUILT TO LAST: Advanced heat treatment process for strength
- PREMIUM MATERIALS: Precision manufactured using premium-grade steel for lasting performance and extended bearing life
- RELIABLE PERFORMANCE: Element size and quantity are engineered to meet or exceed the load rating of OE bearings
- COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on
Driveworks – Ball Bearing (Part No.SL-203-FF)
from
$13.49
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Carquest Premium – Alternator: Remanufactured, 130 Amps, Limited Lifetime Warranty (Part No.11198A)
from
$258.99
Carquest Premium alternators are premium constructed, original equipment (O.E.) replacement parts with industry-leading warranties. Our Carquest Premium alternators are designed to meet or exceed OE specifications for fit, form and function. Our alternators are remanufactured by an IATF/TS 16949 certified supplier that meets the highest standards achievable. We replace all wear components (brushes, bushings and bearings) with new components to ensure long-life. All critical components are electronically tested during assembly and the entire unit is 100% tested, ensuring proper performance backed by an industry-leading warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.
Product Features:
See More
Product Features:
- Designed to meet or exceed OE specifications for fit, form and function
- Remanufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
- Regulators and rectifiers are 100% electronically load tested for reliable charging performance
- 100% new OE-quality brushes and bearings are used to ensure long service life
- Rotors and stators are load tested and double insulated for maximum charging performance
- Slip rings are precision polished for maximum brush contact and service life
- Application-specific technical bulletins included where applicable
- All units are 100% triple tested to ensure quality and performance
- Technical support team staffed with ASE Certified Technicians: 1-800-228-9672
Carquest Premium – Alternator: Remanufactured, 45 Amps (Part No.14540A)
from
$49.99
Product Features:
See More
- Designed to meet or exceed OE specifications for fit, form and function
- Remanufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
- Regulators and rectifiers are 100% electronically load tested for reliable charging performance
- 100% new OE-quality brushes and bearings are used to ensure long service life
- Rotors and stators are load tested and double insulated for maximum charging performance
- Slip rings are precision polished for maximum brush contact and service life
- Application-specific technical bulletins included where applicable
- All units are 100% triple tested to ensure quality and performance
- Technical support team staffed with ASE Certified Technicians: 1-800-228-9672
WAI – Denso Ir/If 80 Amp/12 Volt, Cw, 2-Groove Pulley, Limited Lifetime Warranty (Part No.13497N)
from
$204.99
This 80-amp alternator from WAI is a top-tier choice for reliable performance and durability. Engineered to meet or exceed OEM specifications, it ensures a perfect fit and hassle-free installation. Its advanced voltage regulator protection guards against transient voltage spikes, preventing potential battery damage while maintaining low heat dissipation. The high-power rectifier assembly, equipped with open junction press-fit diodes, keeps the unit running cool even under demanding conditions. Fully compliant with ECU communication, this alternator is designed for seamless integration with your vehicle’s electrical system. Each unit comes with a printed copy of test results, giving you confidence in its performance from the very first use. With WAI’s commitment to quality, this alternator delivers exceptional value and dependable power for your vehicle.
Product Features:
See More
Product Features:
- Engineered to meet or exceed OEM specifications for a perfect fit and hassle-free installation.
- Voltage regulator protection – load dump protected against transient voltage spikes avoiding potential battery damage. Low saturation voltage results in lower heat dissipation. Fully compliant in communication with ECU.
- High power rectifier assembly is designed with higher power open junction press fit diodes to keep the units running cool.
- Each unit includes a printed copy of the test results so you know exactly what to expect from our parts right from the first time they power on.
- Designed for exceptional durability, this alternator ensures reliable performance under demanding conditions, providing consistent power output for your vehicle’s electrical system.
Carquest Premium – Alternator: Remanufactured, 180 Amps, Limited Lifetime Warranty (Part No.11405A)
from
$276.99
Carquest Premium alternators are premium constructed, original equipment (O.E.) replacement parts with industry-leading limited warranties. Our Carquest Premium alternators are designed to meet or exceed OE specifications for fit, form and function. Our alternators are remanufactured by an IATF/TS 16949 certified supplier that meets the highest standards achievable. We replace all wear components (brushes, bushings and bearings) with new components to ensure long-life. All critical components are electronically tested during assembly and the entire unit is 100% tested, ensuring proper performance backed by an industry-leading limited warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.
Product Features:
See More
Product Features:
- Designed to meet or exceed OE specifications for fit, form and function
- Remanufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
- Regulators and rectifiers are 100% electronically load tested for reliable charging performance
- 100% new OE-quality brushes and bearings are used to ensure long service life
- Rotors and stators are load tested and double insulated for maximum charging performance
- Slip rings are precision polished for maximum brush contact and service life
- Application-specific technical bulletins included where applicable
- All units are 100% triple tested to ensure quality and performance
- Technical support team staffed with ASE Certified Technicians: 1-800-228-9672
Product Features:
Carquest Premium – Alternator: Remanufactured, 80 Amps (Part No.13796A)
from
$175.99
Carquest Premium alternators are premium constructed, original equipment (O.E.) replacement parts with industry-leading limited warranties. Our Carquest Premium alternators are designed to meet or exceed OE specifications for fit, form and function. Our alternators are remanufactured by an IATF/TS 16949 certified supplier that meets the highest standards achievable. We replace all wear components (brushes, bushings and bearings) with new components to ensure long-life. All critical components are electronically tested during assembly and the entire unit is 100% tested, ensuring proper performance backed by an industry-leading limited warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.
Product Features:
See More
Product Features:
- Designed to meet or exceed OE specifications for fit, form and function
- Remanufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
- Regulators and rectifiers are 100% electronically load tested for reliable charging performance
- 100% new OE-quality brushes and bearings are used to ensure long service life
- Rotors and stators are load tested and double insulated for maximum charging performance
- Slip rings are precision polished for maximum brush contact and service life
- Application-specific technical bulletins included where applicable
- All units are 100% triple tested to ensure quality and performance
- Technical support team staffed with ASE Certified Technicians: 1-800-228-9672
Product Features:
Carquest Premium – Alternator: Remanufactured, 100 Amps, Limited Lifetime Warranty (Part No.13856A)
from
$184.99
Carquest Premium alternators are premium constructed, original equipment (O.E.) replacement parts with industry-leading limited warranties. Our Carquest Premium alternators are designed to meet or exceed OE specifications for fit, form and function. Our alternators are remanufactured by an IATF/TS 16949 certified supplier that meets the highest standards achievable. We replace all wear components (brushes, bushings and bearings) with new components to ensure long-life. All critical components are electronically tested during assembly and the entire unit is 100% tested, ensuring proper performance backed by an industry-leading limited warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.
Product Features:
See More
Product Features:
- Designed to meet or exceed OE specifications for fit, form and function
- Remanufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
- Regulators and rectifiers are 100% electronically load tested for reliable charging performance
- 100% new OE-quality brushes and bearings are used to ensure long service life
- Rotors and stators are load tested and double insulated for maximum charging performance
- Slip rings are precision polished for maximum brush contact and service life
- Application-specific technical bulletins included where applicable
- All units are 100% triple tested to ensure quality and performance
- Technical support team staffed with ASE Certified Technicians: 1-800-228-9672
Product Features:
Upgrade your 1969 Toyota Land Cruiser with Top-Quality Alternators and Starters
When it comes to maintaining or upgrading your 1969 Toyota Land Cruiser, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Toyota or enhancing its overall performance, Alternators and Starters are key to keeping your Land Cruiser functioning at its best. At Advance Auto Parts, we offer a wide selection of 9 Alternators and Starters for the 1969 Toyota Land Cruiser, designed to meet your needs without breaking the bank.
From
Starter Part
replacements to
Alternator Parts
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Alternators and Starters for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Alternators and Starters for your 1969 Toyota Land Cruiser at great prices.
Our Alternators and Starters inventory for this model
ranges from just $2.29 to $161.99, with
an average price of $36.22.
Our 9 Alternators and Starters in stock come from 3 trusted brands, so you’re sure to find the right part for your 1969 Toyota Land Cruiser without overspending.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Alternators and Starter upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 1969 Toyota Land Cruiser is always ready to roll. We’re committed to providing you with everything you need to keep your Land Cruiser in top shape, all in one place.
Start shopping confidently below for your 1969 Toyota Land Cruiser!
Best-Selling Starter Parts for 1969 Toyota Land Cruisers
Enhance the driving experience in your Toyota with 5 quality Starter Part components, starting at $2.29.
WAI – Starter: 1.0kW/12 Volt, CW, 9-Tooth Pinion (Part No.16828N)
from
$161.99
Product Features:
See More
- Engineered to meet or exceed OEM specifications for a perfect fit and hassle-free installation.
- Premium grade solenoids contains materials specifically selected for best conductivity. High temperature cap ensures that the solenoid works flawlessly in high heat environments. High dielectric strength outer case resists shorting.
- Armatures have precision machined and upgraded steel shaft for improved durability and performance.
- Each unit includes a printed copy of the test results so you know exactly what to expect from our parts right from the first time they power on.
Carquest Premium – Starter Solenoid (Part No.SBC2261)
from
$38.99
The starting system consists of the rotating electrical motor and solenoid which may be mounted on the starter motor or mounted remotely. The electric motor drives a gear which engages with the engine’s flywheel located at the rear of the motor, when the motor is energized, the motor will turn the engines crankshaft. The starter solenoid is an electric relay, or switch used to provide power to the starter motor or any electrical device that requires high amperage to operate. A low amperage wire winding within the solenoid will create magnetic force when voltage is applies from a remote switch, such as the ignition switch or another type of remote mounted switch. The contacts within the relay carry a high amperage load to run an electric motor or some other type of high load circuit.
Product Features:
See More
Product Features:
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Carquest Premium – Starter Brush (Part No.XAA1145)
from
$6.99
The starting system consists of the rotating electrical motor and solenoid which may be mounted on the starter motor or mounted remotely. The electric motor drives a gear which engages with the engine’s flywheel located at the rear of the motor, when the motor is energized, the motor will turn the engines crankshaft. Individual motor components are available to service any failed part within the motor such as brushes, bushings, and starter drive unit.
Product Features:
See More
Product Features:
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Carquest Premium – Starter Bushing (Part No.SBA5224)
from
$2.49
The starting system consists of the rotating electrical motor and solenoid which may be mounted on the starter motor or mounted remotely. The electric motor drives a gear which engages with the engine’s flywheel located at the rear of the motor, when the motor is energized, the motor will turn the engines crankshaft. Individual motor components are available to service any failed part within the motor such as brushes, bushings, and starter drive unit.
Product Features:
See More
Product Features:
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Carquest Premium – Starter Bushing (Part No.SBA5524)
from
$2.29
The starting system consists of the rotating electrical motor and solenoid which may be mounted on the starter motor or mounted remotely. The electric motor drives a gear which engages with the engine’s flywheel located at the rear of the motor, when the motor is energized, the motor will turn the engines crankshaft. Individual motor components are available to service any failed part within the motor such as brushes, bushings, and starter drive unit.
Product Features:
See More
Product Features:
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Most Popular 1969 Toyota Land Cruiser Alternator Parts
Customize your Toyota with 4 Alternator Parts products
like Alternators,
Commutator End Bearings, and
Drive End Bearings, all
priced under $49.99.
National – Multi-Purpose Bearing (Part No.203-S)
from
$21.49
Product Features:
See More
- BUILT TO LAST: Advanced heat treatment process for strength
- PREMIUM MATERIALS: Precision manufactured using premium-grade steel for lasting performance and extended bearing life
- RELIABLE PERFORMANCE: Element size and quantity are engineered to meet or exceed the load rating of OE bearings
- COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on
National – Multi-Purpose Bearing (Part No.202-SS)
from
$19.99
Product Features:
See More
- BUILT TO LAST: Advanced heat treatment process for strength
- PREMIUM MATERIALS: Precision manufactured using premium-grade steel for lasting performance and extended bearing life
- RELIABLE PERFORMANCE: Element size and quantity are engineered to meet or exceed the load rating of OE bearings
- COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on
Carquest Premium – Alternator: Remanufactured, 45 Amps (Part No.14540A)
from
$49.99
Product Features:
See More
- Designed to meet or exceed OE specifications for fit, form and function
- Remanufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
- Regulators and rectifiers are 100% electronically load tested for reliable charging performance
- 100% new OE-quality brushes and bearings are used to ensure long service life
- Rotors and stators are load tested and double insulated for maximum charging performance
- Slip rings are precision polished for maximum brush contact and service life
- Application-specific technical bulletins included where applicable
- All units are 100% triple tested to ensure quality and performance
- Technical support team staffed with ASE Certified Technicians: 1-800-228-9672
National – Multi-Purpose Bearing (Part No.201-S)
from
$21.79
Product Features:
See More
- BUILT TO LAST: Advanced heat treatment process for strength
- PREMIUM MATERIALS: Precision manufactured using premium-grade steel for lasting performance and extended bearing life
- RELIABLE PERFORMANCE: Element size and quantity are engineered to meet or exceed the load rating of OE bearings
- COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on
FAQs for 1969 Toyota Land Cruiser Alternators and Starters
Which Alternators and Starters are best-sellers for 1969 Toyota Land Cruisers?
Out of 9 Alternators and Starters that fit 1969 Toyota Land Cruisers, the following parts are the top sellers:
- Multi-Purpose Bearing (12025078) – $19.99
- Alternator: Remanufactured, 45 Amps (3113353) – $49.99
- Multi-Purpose Bearing (3272575) – $21.79
What’s the price range for 1969 Toyota Land Cruiser Alternators and Starters?
Alternators and Starter prices for the 1969 Toyota Land Cruiser start at $2.29 and go up to $161.99 for the most premium parts.
What’s the average price of a Alternators and Starter for a 1969 Toyota Land Cruiser?
The average price for Alternators and Starters for the 1969 Toyota Land Cruiser is $36.22. Keep in mind the variety of part types within our Alternators and Starter category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Alternators and Starters for other Toyota Land Cruiser model years?
What are the cheapest Alternators and Starters for my 1969 Toyota Land Cruiser?
The cheapest 1969 Toyota Land Cruiser Alternators and Starters we carry in stock are:
- Starter Bushing (50031782) – $2.29
- Starter Bushing (12574165) – $2.49
- Starter Brush (12506401) – $6.99
- Multi-Purpose Bearing (12025078) – $19.99
- Multi-Purpose Bearing (5052580) – $21.49
What are the top-rated Alternators and Starters that fit the 1969 Toyota Land Cruiser?
Out of 2 reviews by customers, our 1969 Toyota Land Cruiser Alternators and Starters have an average customer rating of . These are some of the highest-rated Alternators and Starter types for the 1969 Toyota Land Cruiser and their top-rated products:
- Alternator Parts
- Multi-Purpose Bearing (5052580) – $21.49
What types of Alternators and Starters do you sell for my 1969 Toyota Land Cruiser?
As of 11/2/25, these are some of the most in-demand types of Alternators and Starters for a 1969 Toyota Land Cruiser:
Can I get help with 1969 Toyota Land Cruiser Alternators and Starter orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Toyota Alternators and Starters and more.
What is your return policy for Toyota Land Cruiser Alternators and Starters?
Advance Auto Parts keeps returns simple. For new Toyota Land Cruiser Alternators and Starters and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
