1969 Pontiac LeMans Body Parts

Essential Body Parts for 1969 Pontiac LeMans

Metro Mould – Quarter Glass Seal (Part No.VS 3-MX)

Quarter Glass Seal

from

$37.49
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s Quarter Glass Seals are the highest quality reproductions available. With molded curves and a non-wrinkling lip design. Other brands do not compare. Rear Roll-Up Quarter Window Seals, for 2-Door Hardtops and Convertibles. Made without steel core. 16-1/2 In. long. Pair.

Product Features:
  • Jet black to match the color of the original part
  • Dense rubber to match the original
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

AmeriSeal – Universal Trunk Seal (Part No.31270)

Universal Trunk Seal

from

$71.99
Universal Trunk Seal Self Adhesive
See More

KAI – Cowl Side Panel (Part No.GMK403238568L)

Cowl Side Panel

from

$115.99
New Goodmark Driver Side Lower Cowl Side Panel

Product Features:
  • Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Floor Pan (Part No.GMK403550578R)

Floor Pan

from

$133.99
New Goodmark Front Passenger Floor Section

Product Features:
  • Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

AmeriSeal – Flexible Flocked Lining All-Rubber Window Glass Run Channel 72" Length (Part No.10868)

Flexible Flocked Lining All-Rubber Window Glass Run Channel 72" Length

from

$16.99
This Ameriseal 72″ Flexible Flocked Lining All-Rubber Window Glass Run Channel 72″ Length For Application- 1965-1975 GM Mid size car is the ideal solution for all your car leakage problems. This window glass run channel is perfectly compatible with the 1979-1993 Ford Mustang Coupe model. It features a strong adhesive to keep your car completely protected from dust and water. It is an ideal solution for your old or worn-out counterpart.

Product Features:
  • Flexible model
  • Easy installation allows for user-friendly operability
  • Durably designed for longevity
  • Allows you to keep dust and water away from your car
  • Highly dense rubber body built
See More

KAI – Floor Pan Toe Board (Part No.GMK403037064L)

Floor Pan Toe Board

from

$92.99
New Goodmark Driver Side T Board Patch

Product Features:
  • Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Metro Mould – Hood Stop Buffer (Part No.HF 5)

Hood Stop Buffer

from

$11.79
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Hood Bumper. Each.

Product Features:
  • Jet black to match the color of the original part
  • Dense rubber to match the original
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

KAI – Deck Lid Latch (Part No.GMK404270559)

Deck Lid Latch

from

$32.99
New Goodmark Trunk Latch

Product Features:
  • Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Windshield Molding Clip (Part No.GMK403252568S)

Windshield Molding Clip

from

$117.99
New Goodmark 3 Piece Front Reveal Moulding Set, For 2 Door Hardtop And Sedan Models

Product Features:
  • For 2 Door Hardtop And Sedan Models
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Window Crank Handle (Part No.GMK403042165)

Window Crank Handle

from

$22.99
New Goodmark Window Crank Handle With Chrome Knob

Product Features:
  • Made Of Die Cast
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Metro Mould – Tailgate Seal (Part No.TG 16)

Tailgate Seal

from

$197.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro makes a huge line of Tailgate Seals that all have that show winning look and fit. Our Tailgate Seals have a perfect fit. Tailgate Seal for 4-Door Station wagons. Each.

Product Features:
  • Jet black to match the color of the original part
  • There’s no need to slam when you use Metro SUPERsoft weatherstripping products
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

Metro Mould – Door Seal (Part No.LM 16-S/W)

Door Seal

from

$113.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Ready-to-install Door Weatherstripping that comes with correct tool-installed clips and pins plus molded ends that are truly softer than other available reproductions. All are made of the finest weather resistant and ozone resistant sponge. Rear Molded Door Seals. For 4-door wagon only, with RWD. Pair. R&L.

Product Features:
  • Jet black to match the color of the original part
  • There’s no need to slam when you use Metro SUPERsoft weatherstripping products
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

KAI – Exterior Door Handle (Part No.GMK403444076L)

Exterior Door Handle

from

$14.99
New Goodmark Driver Side Chrome Outer Door Handle

Product Features:
  • Made Of Die Cast
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Metro Mould – Door Window Seal (Part No.ALP 5000)

Door Window Seal

from

$26.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Ready-to-install Door Weatherstripping that comes with correct tool-installed clips and pins plus molded ends that are truly softer than other available reproductions. All are made of the finest weather resistant and ozone resistant sponge. Door Lock Pillar Seal. Used on lower leading edge of quarter window. Highly detailed, made with steel cores. Pair. R&L.

Product Features:
  • Jet black to match the color of the original part
  • Dense material to match the original
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

Metro Mould – Fuel Door Rubber Stop (Part No.SB 81)

Fuel Door Rubber Stop

from

$8.79
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Fuel Door Bumper. 7/8 In. high, 5/16 In. O.D. Each.

Product Features:
  • Jet black to match the color of the original part
  • Dense rubber to match the original
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

Needa Parts – Door Hinge Bushings, .345 In. Id X .420 In. Od X .305 In. Height (Part No.38375)

Door Hinge Bushings, .345 In. Id X .420 In. Od X .305 In. Height

from

$1.79
This door hinge bushing is designed to match the fit & function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this door hinge bushing matches the fit and function of the factory part on specified years, makes and models.
  • Ideal solution – this bushing is a reliable replacement for an original part that has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Carquest Premium – Door Lock Kit (Part No.DLA1081)

Door Lock Kit

from

$24.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

KAI – Trunk Floor (Part No.GMK4032720681L)

Trunk Floor

from

$77.99
New Goodmark Driver Side Trunk Floor, 21 Inches Wide X 37 Inches Long

Product Features:
  • 21 Inches Wide X 37 Inches Long
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Metro Mould – Vent Glass Seal (Part No.WR 2012)

Vent Glass Seal

from

$190.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Vent Window Seals. Fits 4-door sedan. Pair. R&L.

Product Features:
  • Jet black to match the color of the original part
  • Dense material to match the original
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

KAI – Door Stop (Part No.GMK403240368S)

Door Stop

from

$17.99
New Goodmark 4 Piece Rubber Door Bumper Kit

Product Features:
  • Made Of Rubber
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Trunk Floor Brace (Part No.GMK4032745681)

Trunk Floor Brace

from

$139.99
New Goodmark Trunk Floor Brace, Over Axle Brace

Product Features:
  • Over Axle Brace
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Door Sill Plate (Part No.GMK403557578)

Door Sill Plate

from

$129.99
New Goodmark Driver Or Passenger Side Door Sill Plate With Emblem, For 2 Door Vehicles

Product Features:
  • For 2 Door Vehicles
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Carquest Premium – Trunk Lock (Part No.TLC1005)

Trunk Lock

from

$12.49
All modern vehicles consist of several independent operating systems controlled by a main system processor with independent sub-processors. The sub-processors provide class 2 serial information data to the main processor while handling the operation of the system and carry the circuit load to protect the main operating system. When replacing any level processor programming may be needed to enter the unit into the vehicles main operating system.

Product Features:
  • Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
See More

KAI – Deck Lid Striker (Part No.GMK4030721642)

Deck Lid Striker

from

$27.99
New Goodmark Deck Lid Striker, For All Models Except Wagon, Bolts To Striker Support

Product Features:
  • For All Models Except Wagon Bolts To Striker Support
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Metro Mould – Bumper (Part No.SM 66)

Bumper

from

$15.29
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Rocker Arm Cover. Neoprene plug. Fits 1 In. hole. Each.

Product Features:
  • Jet black to match the color of the original part
  • Dense rubber to match the original
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

Metro Mould – Convertible Top Seal (Part No.HD 730)

Convertible Top Seal

from

$59.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s Convertible Top Seals all have that show winning look and fit. Our Convertible Top Seals all incorporate steel cores and studs for a perfect fit. Header Seal for Convertibles. Made with molded ends and steel core. High-quality molded sponge. 53-3/4 In. Long. Each.

Product Features:
  • Jet black to match the color of the original part
  • There’s no need to slam when you use Metro SUPERsoft weatherstripping products
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

Dorman – Help – Door Hinge Pin And Bushing Kit – 1 Pins And 4 Bushings (Part No.38400)

Door Hinge Pin And Bushing Kit - 1 Pins And 4 Bushings

from

$8.49
This door hinge pin & bushing kit is designed to match the original parts required to restore door alignment and function on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this door hinge pin & bushing kit is designed to match the original pin and bushing required to restore the alignment and proper function of a door on specified vehicles
  • Ideal solution – this pin and bushing are reliable replacements for original components that have failed due to wear
  • Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

KAI – Door Lock Striker (Part No.GMK403560678)

Door Lock Striker

from

$38.99
New Goodmark Door Lock Striker, Allen Head Bolt With Collar

Product Features:
  • Allen Head Bolt With Collar
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Upgrade your 1969 Pontiac LeMans with Top-Quality Body Parts

When it comes to maintaining or upgrading your 1969 Pontiac LeMans, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Pontiac or enhancing its overall performance, Body Parts are key to keeping your LeMans functioning at its best. At Advance Auto Parts, we offer a wide selection of 56 Body Parts for the 1969 Pontiac LeMans, designed to meet your needs without breaking the bank. From Vehicle Door replacements to Bumpers upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Body Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Body Parts for your 1969 Pontiac LeMans at great prices. Our Body Parts inventory for this model ranges from just $1.79 to $534.99, with an average price of $90.19. Our 56 Body Parts in stock come from 9 trusted brands, so you’re sure to find the right part for your 1969 Pontiac LeMans without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1969 Pontiac LeMans, we stock popular OEM and aftermarket Body Parts from top names like Dorman, Locksmart, AutoCraft, and more. Dorman Body Parts start at just $7.99 and boast an impressive 4 stars average rating from customers. Locksmart and AutoCraft also bring quality to the table, with Body Parts available starting at $9.79, and at an average 4 stars rating. With 1,536 customer reviews and counting, our 1969 Pontiac LeMans Body Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Body Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1969 Pontiac LeMans is always ready to roll. We’re committed to providing you with everything you need to keep your LeMans in top shape, all in one place. Start shopping confidently below for your 1969 Pontiac LeMans!

Best-Selling Vehicle Doors for 1969 Pontiac LeMans

Enhance the driving experience in your Pontiac with 13 quality Vehicle Door components, starting at $1.79.

Dorman – Help – Door Striker Bolt Kit – 7/16 In.-14 (Part No.38428)

Door Striker Bolt Kit - 7/16 In.-14

from

$11.99
This door lock striker is designed to match the fit and function of the original striker on specified vehicles, and is engineered for durability and reliable performance.

Product Features:
  • Direct replacement – this door lock striker is designed to match the fit and function of the original striker on specified vehicles.
  • Restores functionality – reliable replacement for an original part that has failed due to collision damage or fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Locksmart – Door Lock Kit (Part No.DL15800)

Door Lock Kit

from

$24.29
LockSmart® is a specialized aftermarket lock brand featuring door, trunk, and ignition lock cylinders. LockSmart® provides OE fit, form, and function locks across domestic and import applications for both late and older model vehicles.

Product Features:
  • All door locks are perfectly matched to the original for precision installation
  • Professional quality construction using solid brass tumblers, chrome plated brass keys, die-cast zinc lock cores and multiple, randomly assigned key codes ensures superior operation
  • Decades of industry leading research and development focused on meeting the technician’s needs
  • With industry leading expertise, when original equipment fails our products are designed to fix the inherent failure issues
See More

Dorman – Help – Door Hinge Bushing Assortment – 4 Sizes (Part No.38374)

Door Hinge Bushing Assortment - 4 Sizes

from

$7.99
This door hinge bushing is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this door hinge bushing matches the fit and function of the factory part on specified years, makes and models
  • Ideal solution – this bushing is a reliable replacement for an original part that has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Needa Parts – Door Hinge Bushings, .345 In. Id X .420 In. Od X .305 In. Height (Part No.38375)

Door Hinge Bushings, .345 In. Id X .420 In. Od X .305 In. Height

from

$1.79
This door hinge bushing is designed to match the fit & function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this door hinge bushing matches the fit and function of the factory part on specified years, makes and models.
  • Ideal solution – this bushing is a reliable replacement for an original part that has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Metro Mould – Door Seal (Part No.LM 12-T)

Door Seal

from

$195.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Ready-to-install Door Weatherstripping that comes with correct tool-installed clips and pins plus molded ends that are truly softer than other available reproductions. All are made of the finest weather resistant and ozone resistant sponge. Front Molded Door Seals with Clips. For 4-door sedans and station wagons. Replaces OEM #7717764/5. Each. is 127-1/4 In. long. Pair. R&L.

Product Features:
  • Jet black to match the color of the original part
  • There’s no need to slam when you use Metro SUPERsoft weatherstripping products
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

KAI – Door Stop (Part No.GMK403240368S)

Door Stop

from

$17.99
New Goodmark 4 Piece Rubber Door Bumper Kit

Product Features:
  • Made Of Rubber
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Metro Mould – Door Seal (Part No.LM 12-U)

Door Seal

from

$78.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Ready-to-install Door Weatherstripping that comes with correct tool-installed clips and pins plus molded ends that are truly softer than other available reproductions. All are made of the finest weather resistant and ozone resistant sponge. Rear Molded Door Seals with Clips. For 4-door sedans and station wagons. Replaces OEM #771772/3. Each. is 115 In. long. Pair. R&L.

Product Features:
  • Jet black to match the color of the original part
  • There’s no need to slam when you use Metro SUPERsoft weatherstripping products
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

Metro Mould – Door Window Seal (Part No.ALP 5002-A)

Door Window Seal

from

$39.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Ready-to-install Door Weatherstripping that comes with correct tool-installed clips and pins plus molded ends that are truly softer than other available reproductions. All are made of the finest weather resistant and ozone resistant sponge. Door Lock Pillar Seal. Made with full steel cores. Pair. R&L.

Product Features:
  • Jet black to match the color of the original part
  • Dense material to match the original
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

KAI – Door Sill Plate (Part No.GMK403257568LC)

Door Sill Plate

from

$31.99
New Goodmark Driver Side Door Sill Plate Without Fisher Body Sticker, For 2 Door Models

Product Features:
  • For 2 Door Models
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Door Sill Plate (Part No.GMK403257568RC)

Door Sill Plate

from

$31.99
New Goodmark Passenger Side Door Sill Plate Without Fisher Body Sticker, For 2 Door Models

Product Features:
  • For 2 Door Models
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Metro Mould – Door Window Seal (Part No.IS-ALP 5002-A)

Door Window Seal

from

$19.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Ready-to-install Door Weatherstripping that comes with correct tool-installed clips and pins plus molded ends that are truly softer than other available reproductions. All are made of the finest weather resistant and ozone resistant sponge. Door Lock Pillar Seal (Imported). Made with full steel cores. Pair. R&L.

Product Features:
  • Jet black to match the color of the original part
  • Dense material to match the original
  • Exact fit
  • High quality original equipment replacement part
See More

Metro Mould – Door Mirror Mounting Pad (Part No.MP 989-P)

Door Mirror Mounting Pad

from

$7.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Mirror Pad. 1-1/4 In. wide X 5 In. long. Each.

Product Features:
  • Jet black to match the color of the original part
  • Dense rubber to match the original
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

Metro Mould – Door Stop (Part No.SB 35)

Door Stop

from

$4.49
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Door Bumper. Made with twin retainers. 1-1/8 In. high X 9/16 In. wide X 1 In. long. Each.

Product Features:
  • Jet black to match the color of the original part
  • Dense rubber to match the original
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

Most Popular 1969 Pontiac LeMans Bumpers

Customize your Pontiac with 2 Bumpers products like Rear Bumpers, all priced under $16.29.

Metro Mould – Seat Frame Retainer (Part No.SB 62-A)

Seat Frame Retainer

from

$16.29
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Seat Bumper. Made with steel core like original. 1-1/2 In. long, 7/16 In. thick. Two used per car. Each.

Product Features:
  • Jet black to match the color of the original part
  • Dense material to match the original
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

Metro Mould – License Plate Bracket (Part No.SB 82)

License Plate Bracket

from

$6.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. License Plate Bumper. Fits a 1/4 In. hole. Each.

Product Features:
  • Jet black to match the color of the original part
  • Dense rubber to match the original
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

Top Picks for 1969 Pontiac LeMans Vehicle Hoods

Upgrade Pontiac LeMans with top-quality Vehicle Hoods parts, including 4 OEM and aftermarket selections for your 1969 model.

KAI – Cowl Side Panel (Part No.GMK403238568L)

Cowl Side Panel

from

$115.99
New Goodmark Driver Side Lower Cowl Side Panel

Product Features:
  • Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Cowl Side Panel (Part No.GMK403238568R)

Cowl Side Panel

from

$115.99
New Goodmark Passenger Side Lower Cowl Side Panel

Product Features:
  • Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Metro Mould – Cowl Seal (Part No.CS 5)

Cowl Seal

from

$21.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Hood to Cowl Seal, with clips. 59-1/8 In. long. Each.

Product Features:
  • Jet black to match the color of the original part
  • There’s no need to slam when you use Metro SUPERsoft weatherstripping products
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

Metro Mould – Door Stop (Part No.HF 28)

Door Stop

from

$13.79
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Door, Hood and Cowl Bumper. Made with steel core. Held by screw. 15/16 In. high. Each.

Product Features:
  • Jet black to match the color of the original part
  • Dense material to match the original
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

In-Demand Vehicle Latches and Handles for 1969 Pontiac LeMans

Select from 4 premium Vehicle Latches and Handles parts for your 1969 Pontiac LeMans, with prices ranging from $9.79 to $88.99.

AutoCraft – Window Handle (Part No.76910)

Window Handle

from

$9.79
Worn or broken window crank handle leading to difficult window operation? Made of durable material for reliable performance, this window crank handle replaces the original equipment handle.

Product Features:
  • Ideal replacement – this window crank handle matches the fit and function of the original equipment component
  • Durable construction – this window crank handle is made of durable material to withstand extended use
  • Easy to install – this window crank requires no special tools to install
  • Versatile design – this window crank handle is suitable for use in various locations in the vehicle
See More

KAI – Door Striker Plate (Part No.GMK403260668S)

Door Striker Plate

from

$88.99
New Goodmark 3 Piece Door Jamb Striker Plate Set, For Convertible Models

Product Features:
  • For Convertible Models
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Deck Lid Latch (Part No.GMK404270559)

Deck Lid Latch

from

$32.99
New Goodmark Trunk Latch

Product Features:
  • Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Metro Mould – Exterior Door Handle Gasket (Part No.UM 2005-100)

Exterior Door Handle Gasket

from

$11.29
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Unbeaded Door Handle Mounting Pads. 4-Piece Set

Product Features:
  • Jet black to match the color of the original part
  • Flat Gasket
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

Most Sold 1969 Pontiac LeMans Bodies and Fender Parts

Explore our best-selling Pontiac parts for the 1969 LeMans among 10 OEM and aftermarket options starting from $3.49.

KAI – Floor Pan Toe Board (Part No.GMK403237068R)

Floor Pan Toe Board

from

$109.99
New Goodmark Floor Pan T Board, Passenger Side, 30 X 16, With Floor To Firewall Extension, Includes Part Of Transmission Hump

Product Features:
  • Passenger Side 30 X 16 With Floor To Firewall Extension Includes Part Of Transmission Hump
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Floor Pan (Part No.GMK4032515681L)

Floor Pan

from

$101.99
New Goodmark Driver Side T Board Patch Panel

Product Features:
  • Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Floor Pan (Part No.GMK403250068L)

Floor Pan

from

$534.99
New Goodmark Cab Floor, Driver Side, Full Length, 30 Inch X 62 Inch, EDP-Coated

Product Features:
  • Driver Side Full Length 30 Inch X 62 Inch EDP-Coated
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Floor Pan (Part No.GMK403250068R)

Floor Pan

from

$533.99
New Goodmark Cab Floor, Passenger Side, Full Length, 30 Inch X 62 Inch, EDP-Coated

Product Features:
  • Passenger Side Full Length 30 Inch X 62 Inch EDP-Coated
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Body Patch Panel (Part No.GMK4032710682)

Body Patch Panel

from

$179.99
New Goodmark Deck Filler Panel, For Convertible Models

Product Features:
  • For Convertible Models
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Frame Crossmember (Part No.GMK4032395681)

Frame Crossmember

from

$166.99
New Goodmark Rear Frame Crossmember

Product Features:
  • Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Floor Reinforcement (Part No.GMK4030517641)

Floor Reinforcement

from

$122.99
New Goodmark Floor Reinforcement Front Brace Floor Pan Brace

Product Features:
  • Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Floor Reinforcement (Part No.GMK4030517642)

Floor Reinforcement

from

$118.99
New Goodmark Floor Reinforcement Cntr Brace Floor Pan Brace

Product Features:
  • Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Floor Pan Toe Board (Part No.GMK403237068L)

Floor Pan Toe Board

from

$109.99
New Goodmark Floor Pan T Board, Driver Side, 30 X 16, With Floor To Firewall Extension, Includes Part Of Transmission Hump

Product Features:
  • Driver Side 30 X 16 With Floor To Firewall Extension Includes Part Of Transmission Hump
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Metro Mould – Moulding Clip (Part No.WF 205)

Moulding Clip

from

$3.49
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Quarter Window Reveal Molding Clip. Made of Steel. 1-3/8 In. X 11/16 In. Each.

Product Features:
  • Jet black to match the color of the original part
  • Dense material to match the original
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

Top-Rated Body Parts Brands For Your 1969 Pontiac LeMans

Shop for the best-rated brands offering Body Parts and other products for your 1969 Pontiac LeMans. Below you’ll find some of our best rated Body Parts from Dorman, Locksmart, and AutoCraft, and more. Body Parts from these brands that fit a 1969 LeMans start at just $7.99 and are rated as high as 4 stars. OEM and aftermarket Body Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular Dorman 1969 Pontiac LeMans Body Parts

When it comes to maintaining or upgrading your 1969 Pontiac LeMans, using quality Body Parts is essential to ensure durability and a perfect fit. Dorman ticks all of those boxes. We offer a wide selection of Dorman Body Parts, specifically designed for the 1969 Pontiac LeMans. With over 3 Dorman brand Body Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $7.99, with an average price of just $9.49. Plus, with over 16 customer reviews and an average rating of 4 stars, you can trust that our Dorman Body Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

Door Striker Bolt Kit - 7/16 In.-14
from
$11.99

(5)

Door Striker Bolt Kit – 7/16 In.-14

“Works well with new door latch.”

Door Hinge Bushing Assortment - 4 Sizes
from
$7.99

(7)

Door Hinge Bushing Assortment – 4 Sizes

“Returned because I didn’t need them.”

Door Hinge Pin And Bushing Kit - 1 Pins And 4 Bushings
from
$8.49

(4)

Door Hinge Pin And Bushing Kit – 1 Pins And 4 Bushings

“I purchased these for an 1982 K5 Chevy Blazer rear tailgate hinge pins. They work perfect for this application.”

Popular Locksmart 1969 Pontiac LeMans Body Parts

Locksmart auto parts is one of the highest quality Body Part brands in the market. Any 1969 Pontiac LeMans owner should feel confident when installing genuine Locksmart parts in their vehicle. To ensure the best fit and performance for your 1969 LeMans, Advance Auto Parts carries a full inventory of 1 Locksmart Body Parts. Plus you will be keeping your Pontiac in peak condition while saving money because prices on these Locksmart Body Parts range up to $24.29, plus, with more than 4 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Body Parts below will deliver on both quality and value.

Door Lock Kit
from
$24.29

(4)

Door Lock Kit

“Easy to install. The lock kit works great too”

FAQs for 1969 Pontiac LeMans Body Parts

Which Body Parts are best-sellers for 1969 Pontiac LeMans?

Out of 56 Body Parts that fit 1969 Pontiac LeMans, the following parts are the top sellers:

What’s the price range for 1969 Pontiac LeMans Body Parts?

Body Part prices for the 1969 Pontiac LeMans start at $1.79 and go up to $534.99 for the most premium parts.

What’s the average price of a Body Part for a 1969 Pontiac LeMans?

The average price for Body Parts for the 1969 Pontiac LeMans is $90.19. Keep in mind the variety of part types within our Body Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Body Parts for other Pontiac LeMans model years?

Yes, we currently carry Body Parts for 24 model years of Pontiac LeMans between 1963 and 1993. Body Parts are bought most frequently for the following model years: 1993, 1992, 1991, 1990, 1989, 1988, 1981, 1980, and 1979.

What are the cheapest Body Parts for my 1969 Pontiac LeMans?

The cheapest 1969 Pontiac LeMans Body Parts we carry in stock are:

What are the top-rated Body Parts that fit the 1969 Pontiac LeMans?

Out of 1,536 reviews by customers, our 1969 Pontiac LeMans Body Parts have an average customer rating of . These are some of the highest-rated Body Part types for the 1969 Pontiac LeMans and their top-rated products:

What types of Body Parts do you sell for my 1969 Pontiac LeMans?

Can I get help with 1969 Pontiac LeMans Body Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Pontiac Body Parts and more.

What is your return policy for Pontiac LeMans Body Parts?

Advance Auto Parts keeps returns simple. For new Pontiac LeMans Body Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.