1969 Plymouth Satellite Body Parts

Essential Body Parts for 1969 Plymouth Satellites

Metro Mould – Quarter Glass Seal (Part No.VS 7-E)

Quarter Glass Seal

from

$26.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s Quarter Glass Seals are the highest quality reproductions available. With molded curves and a non-wrinkling lip design. Other brands do not compare. Rear Roll-Up Quarter Window Seals, for 2-Door Hardtops. Replaces OEM #2811623/622. Pair.

Product Features:
  • Jet black to match the color of the original part
  • Dense rubber to match the original
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

KAI – Fender Liner (Part No.GMK213234568R)

Fender Liner

from

$81.99
New Goodmark Passenger Side Rear Fender Splash Shield, Without Bracket

Product Features:
  • Without Bracket
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Body Patch Panel (Part No.GMK213271068)

Body Patch Panel

from

$139.99
New Goodmark Deck Filler Panel, Except 2 Door Charger

Product Features:
  • Except 2 Door Charger
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Window Crank Handle (Part No.GMK211142168)

Window Crank Handle

from

$11.99
New Goodmark Window Crank, All Mopar Cars

Product Features:
  • All Mopar Cars
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Needa Parts – Door Hinge Pin and Bushing Kit, 2 Pins and 4 Bushings (Part No.38382)

Door Hinge Pin and Bushing Kit, 2 Pins and 4 Bushings

from

$14.99
This door hinge pin and bushing kit is designed to match the original parts required to restore door alignment and function on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this door hinge pin & bushing kit is designed to match the original pin and bushing required to restore the alignment and proper function of a door on specified vehicles.
  • Ideal solution – this pin and bushing are reliable replacements for original components that have failed due to wear
  • Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Metro Mould – Door Stop (Part No.SB 73-B)

Door Stop

from

$36.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Door Window Weatherstrip Plug. Fits at the end of outer window wipe cat whiskers. Fuzzy outer side. Pair. R&L.

Product Features:
  • Jet black to match the color of the original part
  • Dense rubber flocked to match the original
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

Metro Mould – Door Window Seal (Part No.ALP 7002)

Door Window Seal

from

$32.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Ready-to-install Door Weatherstripping that comes with correct tool-installed clips and pins plus molded ends that are truly softer than other available reproductions. All are made of the finest weather resistant and ozone resistant sponge. Molded Door Lock Pillar Seal. Made with steel core. Pair. R&L.

Product Features:
  • Jet black to match the color of the original part
  • Dense material to match the original
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

Carquest Premium – Starter Relay (Part No.SAC1174)

Starter Relay

from

$59.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – Door Lock Kit (Part No.DLC1238)

Door Lock Kit

from

$20.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – Door Jamb Switch (Part No.SAA3753)

Door Jamb Switch

from

$5.49
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Metro Mould – Cowl Seal (Part No.CS 20-X)

Cowl Seal

from

$107.99
Cowl Seal

Metro Mould – Deck Lid Stop Buffer (Part No.SB 125)

Deck Lid Stop Buffer

from

$69.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Rear Center Hood & Trunk Bumper (’68: Trunk ’70-’74: Hood). 1-1/8 In. high, 15/16 In. O.D. Each.

Product Features:
  • Jet black to match the color of the original part
  • Dense rubber to match the original
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

Metro Mould – Vent Glass Seal (Part No.WR 2306)

Vent Glass Seal

from

$197.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Vent Window Seals. Pair. R&L.

Product Features:
  • Jet black to match the color of the original part
  • Dense material to match the original
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

Metro Mould – License Plate Bracket (Part No.SB 86)

License Plate Bracket

from

$10.29
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. License Plate Bumper. 7/16 In. O.D. fits a 1/4 In. hole. Each.

Product Features:
  • Jet black to match the color of the original part
  • Dense rubber to match the original
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

Metro Mould – Deck Lid Stop Buffer (Part No.SB 30-M)

Deck Lid Stop Buffer

from

$4.79
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Rear Cowl Bumper. 5/8 In. O.D. 1 In. high. Each.

Product Features:
  • Jet black to match the color of the original part
  • Dense rubber to match the original
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

Metro Mould – Hood Seal (Part No.RP 900-B)

Hood Seal

from

$4.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Drain Flap on Cowl. 3-11/16 In. x 1-7/8 In. Each.

Product Features:
  • Jet black to match the color of the original part
  • Dense rubber to match the original
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

Metro Mould – Window Sweeper Kit (Part No.WC 2300-13)

Window Sweeper Kit

from

$197.99
Window Sweeper Kit

Metro Mould – Door Seal (Part No.LM 23-P)

Door Seal

from

$171.99
Door Seal

KAI – Trunk Floor (Part No.GMK2433735711L)

Trunk Floor

from

$164.99
New Goodmark Driver Side Trunk Drop Off, For 2 Door Models

Product Features:
  • For 2 Door Models
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Metro Mould – Windshield (Part No.VWS 2704)

Windshield

from

$279.99
Windshield

Metro Mould – Convertible Top Seal (Part No.HD 4500-B)

Convertible Top Seal

from

$82.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s Convertible Top Seals all have that show winning look and fit. Our Convertible Top Seals all incorporate steel cores and studs for a perfect fit. Header Seal for Convertibles. Each.

Product Features:
  • Jet black to match the color of the original part
  • There’s no need to slam when you use Metro SUPERsoft weatherstripping products
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

Metro Mould – Door Stop (Part No.DB 50)

Door Stop

from

$17.29
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Door Bumper. 3/4 In. high X 1/2 In. wide X 1 In. long. Four used per car. Each.

Product Features:
  • Jet black to match the color of the original part
  • Dense rubber to match the original
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

Metro Mould – Mounting Pad (Part No.MP 622-F)

Mounting Pad

from

$31.99
Mounting Pad

Metro Mould – Mounting Pad (Part No.MP 622-D)

Mounting Pad

from

$12.99
Mounting Pad

Metro Mould – Hood Stop Buffer (Part No.SB 124)

Hood Stop Buffer

from

$7.49
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Hood and Trunk Bumper. Replaces OEM #2785714. Each.

Product Features:
  • Jet black to match the color of the original part
  • Dense rubber to match the original
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

Metro Mould – Hood Stop Buffer (Part No.SBK 2320)

Hood Stop Buffer

from

$93.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Snap-In-Bumper Kit. 21-Piece Set Includes: (4)DB 50, (2)HA 8-A, (4)HF 19-A, (2)HF 62, (2)SB 120, (2)SB 121-A, (2)SB 30-M, (3)SB 86

Product Features:
  • Jet black to match the color of the original part
  • Dense rubber to match the original
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

Metro Mould – Floor Plug (Part No.SB 127-D)

Floor Plug

from

$16.29
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Trunk and Body Plug. Fits 1-1/8 In. hole. Each.

Product Features:
  • Jet black to match the color of the original part
  • Dense rubber to match the original
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

Metro Mould – Floor Plug (Part No.SB 127-E)

Floor Plug

from

$11.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Trunk and Body Plug. Fits 1-15/16 In. hole. Each.

Product Features:
  • Jet black to match the color of the original part
  • Dense rubber to match the original
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

Upgrade your 1969 Plymouth Satellite with Top-Quality Body Parts

When it comes to maintaining or upgrading your 1969 Plymouth Satellite, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Plymouth or enhancing its overall performance, Body Parts are key to keeping your Satellite functioning at its best. At Advance Auto Parts, we offer a wide selection of 41 Body Parts for the 1969 Plymouth Satellite, designed to meet your needs without breaking the bank. From Bodies and Fender Part replacements to Vehicle Doors upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Body Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Body Parts for your 1969 Plymouth Satellite at great prices. Our Body Parts inventory for this model ranges from just $3.99 to $439.99, with an average price of $74.71. Our 41 Body Parts in stock come from 4 trusted brands, so you’re sure to find the right part for your 1969 Plymouth Satellite without overspending.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Body Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1969 Plymouth Satellite is always ready to roll. We’re committed to providing you with everything you need to keep your Satellite in top shape, all in one place. Start shopping confidently below for your 1969 Plymouth Satellite!

Best-Selling Bodies and Fender Parts for 1969 Plymouth Satellites

Enhance the driving experience in your Plymouth with 5 quality Bodies and Fender Part components, starting at $11.99.

KAI – Body Patch Panel (Part No.GMK213271068)

Body Patch Panel

from

$139.99
New Goodmark Deck Filler Panel, Except 2 Door Charger

Product Features:
  • Except 2 Door Charger
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Fender Liner (Part No.GMK213234568R)

Fender Liner

from

$81.99
New Goodmark Passenger Side Rear Fender Splash Shield, Without Bracket

Product Features:
  • Without Bracket
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Fender Liner (Part No.GMK213234568L)

Fender Liner

from

$81.99
New Goodmark Driver Side Rear Fender Splash Shield, Without Bracket

Product Features:
  • Without Bracket
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Metro Mould – Floor Plug (Part No.SB 127-D)

Floor Plug

from

$16.29
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Trunk and Body Plug. Fits 1-1/8 In. hole. Each.

Product Features:
  • Jet black to match the color of the original part
  • Dense rubber to match the original
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

Metro Mould – Floor Plug (Part No.SB 127-E)

Floor Plug

from

$11.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Trunk and Body Plug. Fits 1-15/16 In. hole. Each.

Product Features:
  • Jet black to match the color of the original part
  • Dense rubber to match the original
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

Most Popular 1969 Plymouth Satellite Vehicle Doors

Customize your Plymouth with 13 Vehicle Doors products like Door Hinge Pin Kits, Door Jamb Switches, and Door Seals, all priced under $439.99.

Needa Parts – Door Hinge Pin and Bushing Assortment (Part No.38381)

Door Hinge Pin and Bushing Assortment

from

$5.29
This door hinge pin and bushing kit is designed to match the original parts required to restore door alignment and function on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this door hinge pin & bushing kit is designed to match the original pin and bushing required to restore the alignment and proper function of a door on specified vehicles.
  • Ideal solution – this pin and bushing are reliable replacements for original components that have failed due to wear
  • Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Needa Parts – Door Hinge Pin and Bushing Kit, 2 Pins and 4 Bushings (Part No.38382)

Door Hinge Pin and Bushing Kit, 2 Pins and 4 Bushings

from

$14.99
This door hinge pin and bushing kit is designed to match the original parts required to restore door alignment and function on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this door hinge pin & bushing kit is designed to match the original pin and bushing required to restore the alignment and proper function of a door on specified vehicles.
  • Ideal solution – this pin and bushing are reliable replacements for original components that have failed due to wear
  • Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Carquest Premium – Door Jamb Switch (Part No.SAA3759)

Door Jamb Switch

from

$10.49
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Metro Mould – Window Sweeper Kit (Part No.WC 2300-25)

Window Sweeper Kit

from

$439.99
Window Sweeper Kit

Metro Mould – Door Seal (Part No.LM 23-P)

Door Seal

from

$171.99
Door Seal

Metro Mould – Door Seal (Part No.LM 23-Q)

Door Seal

from

$145.99
Door Seal

Metro Mould – Door Seal (Part No.LM 23)

Door Seal

from

$116.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Ready-to-install Door Weatherstripping that comes with correct tool-installed clips and pins plus molded ends that are truly softer than other available reproductions. All are made of the finest weather resistant and ozone resistant sponge. Molded Door Seals with Steel Core and White Clips. For 2-door hardtop. Replaces OEM #2860400/1. Pair. R&L.

Product Features:
  • Jet black to match the color of the original part
  • There’s no need to slam when you use Metro SUPERsoft weatherstripping products
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

Metro Mould – Door Stop (Part No.SB 73-B)

Door Stop

from

$36.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Door Window Weatherstrip Plug. Fits at the end of outer window wipe cat whiskers. Fuzzy outer side. Pair. R&L.

Product Features:
  • Jet black to match the color of the original part
  • Dense rubber flocked to match the original
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

Metro Mould – Door Window Seal (Part No.ALP 7002)

Door Window Seal

from

$32.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Ready-to-install Door Weatherstripping that comes with correct tool-installed clips and pins plus molded ends that are truly softer than other available reproductions. All are made of the finest weather resistant and ozone resistant sponge. Molded Door Lock Pillar Seal. Made with steel core. Pair. R&L.

Product Features:
  • Jet black to match the color of the original part
  • Dense material to match the original
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

Carquest Premium – Door Lock Kit (Part No.DLC1238)

Door Lock Kit

from

$20.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Metro Mould – Mounting Pad (Part No.MP 622-G)

Mounting Pad

from

$17.29
Mounting Pad

Metro Mould – Mounting Pad (Part No.UM 2700-100)

Mounting Pad

from

$11.49
Mounting Pad

Metro Mould – Door Stop (Part No.DB 50-M)

Door Stop

from

$4.49
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Door Bumper. 3/4 In. high X 1/2 In. wide X 5/8 In. long. Four used per car. Each.

Product Features:
  • Jet black to match the color of the original part
  • Dense rubber to match the original
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

Top Picks for 1969 Plymouth Satellite Bumpers

Upgrade Plymouth Satellites with top-quality Bumpers parts, including 7 OEM and aftermarket selections for your 1969 model.

Metro Mould – Deck Lid Stop Buffer (Part No.SB 30-M)

Deck Lid Stop Buffer

from

$4.79
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Rear Cowl Bumper. 5/8 In. O.D. 1 In. high. Each.

Product Features:
  • Jet black to match the color of the original part
  • Dense rubber to match the original
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

Metro Mould – Bumper (Part No.SM 72)

Bumper

from

$40.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. License Light Wire Grommet. Each.

Product Features:
  • Jet black to match the color of the original part
  • Dense rubber to match the original
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

Metro Mould – Door Stop (Part No.DB 50)

Door Stop

from

$17.29
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Door Bumper. 3/4 In. high X 1/2 In. wide X 1 In. long. Four used per car. Each.

Product Features:
  • Jet black to match the color of the original part
  • Dense rubber to match the original
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

Metro Mould – License Plate Bracket (Part No.SB 86)

License Plate Bracket

from

$10.29
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. License Plate Bumper. 7/16 In. O.D. fits a 1/4 In. hole. Each.

Product Features:
  • Jet black to match the color of the original part
  • Dense rubber to match the original
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

Metro Mould – Deck Lid Stop Buffer (Part No.SB 125-A)

Deck Lid Stop Buffer

from

$8.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Trunk Bumper. Each.

Product Features:
  • Jet black to match the color of the original part
  • Dense rubber to match the original
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

Metro Mould – Glove Box (Part No.SB 121)

Glove Box

from

$6.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Glove Box Bumper. 1/2 In. Long. Each.

Product Features:
  • Jet black to match the color of the original part
  • Dense rubber to match the original
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

Metro Mould – Glove Box (Part No.SB 120)

Glove Box

from

$3.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Ashtray Bumper. 9/16 In. Long. Each.

Product Features:
  • Jet black to match the color of the original part
  • Dense rubber to match the original
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

In-Demand Vehicle Latches and Handles for 1969 Plymouth Satellites

Select from 1 premium Vehicle Latches and Handles parts for your 1969 Plymouth Satellite.

KAI – Window Crank Handle (Part No.GMK211142168)

Window Crank Handle

from

$11.99
New Goodmark Window Crank, All Mopar Cars

Product Features:
  • All Mopar Cars
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Most Sold 1969 Plymouth Satellite Vehicle Hoods

Explore our best-selling Plymouth parts for the 1969 Satellite among 5 OEM and aftermarket options starting from $5.79.

Metro Mould – Cowl Seal (Part No.CS 20-X)

Cowl Seal

from

$107.99
Cowl Seal

Metro Mould – Deck Lid Stop Buffer (Part No.SB 125)

Deck Lid Stop Buffer

from

$69.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Rear Center Hood & Trunk Bumper (’68: Trunk ’70-’74: Hood). 1-1/8 In. high, 15/16 In. O.D. Each.

Product Features:
  • Jet black to match the color of the original part
  • Dense rubber to match the original
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

Metro Mould – Hood Stop Buffer (Part No.SB 130)

Hood Stop Buffer

from

$21.29
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Hood and Trunk Bumper. Each.

Product Features:
  • Jet black to match the color of the original part
  • Dense rubber to match the original
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

Metro Mould – Hood Stop Buffer (Part No.SB 124)

Hood Stop Buffer

from

$7.49
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Hood and Trunk Bumper. Replaces OEM #2785714. Each.

Product Features:
  • Jet black to match the color of the original part
  • Dense rubber to match the original
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

Metro Mould – Hood Stop Buffer (Part No.HF 19)

Hood Stop Buffer

from

$5.79
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Hood Side Bumper. Four used per car. Each.

Product Features:
  • Jet black to match the color of the original part
  • Dense rubber to match the original
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

FAQs for 1969 Plymouth Satellite Body Parts

Which Body Parts are best-sellers for 1969 Plymouth Satellites?

Out of 41 Body Parts that fit 1969 Plymouth Satellites, the following parts are the top sellers:

What’s the price range for 1969 Plymouth Satellite Body Parts?

Body Part prices for the 1969 Plymouth Satellite start at $3.99 and go up to $439.99 for the most premium parts.

What’s the average price of a Body Part for a 1969 Plymouth Satellite?

The average price for Body Parts for the 1969 Plymouth Satellite is $74.71. Keep in mind the variety of part types within our Body Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Body Parts for other Plymouth Satellite model years?

Yes, we currently carry Body Parts for 9 model years of Plymouth Satellites between 1965 and 1974. Body Parts are bought most frequently for the following model years: 1974, 1973, 1972, 1971, 1970, 1968, 1967, 1966, and 1965.

What are the cheapest Body Parts for my 1969 Plymouth Satellite?

The cheapest 1969 Plymouth Satellite Body Parts we carry in stock are:

What types of Body Parts do you sell for my 1969 Plymouth Satellite?

Can I get help with 1969 Plymouth Satellite Body Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Plymouth Body Parts and more.

What is your return policy for Plymouth Satellite Body Parts?

Advance Auto Parts keeps returns simple. For new Plymouth Satellite Body Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.