1969 Mercury Capri Drivetrains
Find Your Specific 1969 Mercury Capri Drivetrains
Below you will find various in-demand Mercury Drivetrains, components and accessories for your 1969 Capri. Advance Auto Parts has popular Capri parts like Drive Shafts and Axles, Differentials, Universal Joints and more. You’ll also find aftermarket and OEM Drivetrains for other Capri model years including
1982,
1983,
1984,
1985,
1986,
1991,
1992,
1993,
1994 and more. Select a category of 1969 Mercury Capri Drivetrains below and start saving instantly.
Popular 1969 Mercury Capri Drivetrains Categories
Essential Drivetrains for 1969 Mercury Capris
Yukon Gear – Trac Loc Spring for Ford 7.5 (Part No.33514)
from
$67.99
Yukon Gear & Axle manufactures a full line of top quality small parts to complete any job including ring gear bolts, crush sleeves, pinion nuts and washers, axle studs, thrust washers and much, much more. For all your differential small parts needs, look no further than Yukon.
Product Features:
See More
Product Features:
- Trac Loc spring
- Fits Ford 7.5″
National – Wheel Seal (Part No.8660S)
from
$10.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Design type: spring loaded; single-lip
- Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
- Good low temperature capability
- Low swell in hydrocarbon fluids
- Delivers quality and reliable performance for every type of repair
Yukon Gear – Heavy Duty Carrier Bearing Puller Set (Part No.56072)
from
$883.99
Yukon Gear & Axle tools are made to the highest industry standard.
Product Features:
See More
Product Features:
- Works on popular Ford, GM, Chrysler, and many other housings
- For differentials with XHD Clamshells
- Can accommodate up to one-ton applications
- Comes with a handy bench-top stand
- This top-quality differential tool is built to last
Yukon Gear – Dura Grip Case For Ford 8.8", 28 Spline (Part No.20072)
from
$399.99
Axle stud, 1 15/32″ X 1/2″ -20.
Product Features:
See More
Product Features:
- Dura Grip positraction carrier case
- Does not include spider gears
- Fits Ford 8.8″ with 28 spline axles
Yukon Gear – Cross Pin Roll Pin, 8.75" Chrysler/Ford 8", 9"/Model 20, 35, .0.260" diameter (Part No.33334)
from
$5.99
Yukon Gear & Axle manufactures a full line of top quality small parts to complete any job including ring gear bolts, crush sleeves, pinion nuts and washers, axle studs, thrust washers and much, much more. For all your differential small parts needs, look no further than Yukon.
Product Features:
See More
Product Features:
- Roll pin for Chrysler 8.75″, Ford 8″ and 9″, AMC Model 20 and Model 35
- 0.260″ diameter
Yukon Gear – 8" Ford Pilot Bearing Retainer (Part No.33254)
from
$13.99
Yukon Gear & Axle manufactures a full line of top quality small parts to complete any job including ring gear bolts, crush sleeves, pinion nuts and washers, axle studs, thrust washers and much, much more. For all your differential small parts needs, look no further than Yukon.
Product Features:
See More
Product Features:
- Pilot bearing retainer for Ford 8″
Yukon Gear – Pinion Install Kit for Ford 8.8" Differential (Part No.13041)
from
$167.99
Yukon Pinion Installation Kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings and races can be reused. This kit features Timken bearings and races along with high-quality seals and small parts. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your gear set.
Product Features:
See More
Product Features:
- Fits 2009 and down Ford 8.8″
- Included are pinion bearings and races, pinion seal, crush sleeve , complete pinion shim kit, and marking compound with brush.
Yukon Gear – 8" Ford Pinion Seal (Part No.30180)
from
$24.99
Yukon Mighty Seals use the latest design and manufacturing technologies to produce a precision fit that seals tight and lasts for years to come.
Product Features:
See More
Product Features:
- Pinion seal
- Fits Ford 8″
Yukon Gear – 14 Plate Dura Grip Comp Clutches GM 8.2"/GM 8.5"/12T/12P/Ford 8.8"/CastIronVette (Part No.16064)
from
$373.99
This Yukon Gear & Axle clutch kit is a direct replacement for the popular Yukon Dura Grip positraction unit.
Product Features:
See More
Product Features:
- Fits Ford 8.8″, 1963-1979 Corvette, GM 12 bolt passenger car and truck, 8.2″, 8.5″ and 8.6″ differentials
- Dura Grip composite replacement clutches
- 14 piece kit
- Composite clutches
Yukon Gear – Ford 8" & 9" Standard Open, Ag, & Detroit Locker Ring Gear Bolt (Part No.33058)
from
$5.99
Ford 8″ & 9″ standard Open, AG, & Detroit locker ring gear bolt. 7/16″ head, .925″ long.
Product Features:
See More
Product Features:
- Ring gear bolt for Ford 8″ and 9″
- For use with standard open carrier, Auburn Gear limited slip and Detroit Locker
- 7/16″ head
- .925″ long
USA Standard Gear – Differential Spider Gear Kits (Part No.39016)
from
$209.99
Product Features:
See More
- Spider gear kit
- Fits Ford 8.8″ 31 spline open differential
- Includes two side gears, two pinion gears, cross pin shaft, cross pin bolt and spider gear thrust washers.
Pro-King – Differential Pinion Shim Kit (Part No.742G202)
from
$6.99
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.
Product Features:
See More
Product Features:
- Meets or exceeds OE specifications
Driveworks – Universal Joint (Part No.DW-369)
from
$15.99
Driveworks Universal Joints are designed to meet or exceed OE fit, form, and function. These universal joints are set to provide superior quality and easy installation. Driveworks Universal Joints are constructed from quality materials for extended durability. Driveworks Universal Joints are pre-lubricated with premium grease to provide a longer service life. The grease fittings are pre-installed to allow for easy maintenance (where applicable).
Product Features:
See More
Product Features:
- The cross is hot forged for the higher torque and horsepower
- The bearing cups are made by cold forging, having higher strength and better rigidity
- Bearing cups allow 360 lubricant distribution to bearing surfaces, and are precision-ground for maximum load-carrying capabilities
- Lubrication grooves are designed to ensure grease penetration to entire journal and needle bearings
- Grease fitting in the cross allows for easy maintenance and the flexible use of the whole assembly
- Snap rings are held to strict tolerances to ensure proper cup position and retention
- Nitrile rubber seals to optimize grease retention and reduce contamination
USA Standard Gear – Ring & Pinion Gear Set For Ford 8" In A 3.80 Ratio (Part No.36118)
from
$401.99
USA Standard ring & pinion sets are the right choice to add confidence to your install. USA Standard Gear offers a full line of ring & pinion sets for a variety of common & hard to find applications. USA standard gear offers a standard one year warranty against defects on their ring & pinion sets.
Product Features:
See More
Product Features:
- Fits Ford 8″
- 8.00″ ring gear diameter
- 25 spline pinion
- 10 ring gear bolts
- 3.80 ratio
Yukon Gear – Pinion Gear and Thrust Washer for 8" and 9" Ford, Model 20, and 7.25" Chrysler (Part No.33301)
from
$4.99
Yukon Gear & Axle manufactures a full line of top quality small parts to complete any job including ring gear bolts, crush sleeves, pinion nuts and washers, axle studs, thrust washers and much, much more. For all your differential small parts needs, look no further than Yukon.
Product Features:
See More
Product Features:
- Pinion gear thrust washer for Ford 8″, Ford 9″ and Chrysler 7.25″
Yukon Gear – Pilot Bearing for Ford 8" (Part No.18043)
from
$40.99
Yukon Gear & Axle manufactures a full line of top quality small parts to complete any job including ring gear bolts, crush sleeves, pinion nuts and washers, axle studs, thrust washers and much, much more. For all your differential small parts needs, look no further than Yukon.
Product Features:
See More
Product Features:
- Pilot bearing
- Fits Ford 8″
Motive Gear – Differential Pinion Nut (Part No.379570S)
from
$6.99
All Motive Gear products are engineered for their specific application and manufactured in state of the art facilities. All of our products undergo rigid quality control processes to insure proper fit, performance and longevity. Motive Gear products can be found in the winners circle at NHRA, IHRA, NMRA, NMCA, SODA, SCORE, BITD, Ultra-4 and NASCAR events because we offer unmatched selection and quality demanded by racers and their crew chiefs – the same quality and selection demanded by DIY customers and top mechanics. With four warehouses strategically located across North America, most Motive Gear orders arrive within 2-4 days. Win with Motive Gear.
See More
Yukon Gear – Yoke for Ford 8" with A 1310 U/Joint Size (Part No.41047)
from
$289.99
Yukon Gear and Axle manufactures a complete line of general replacement and performance series of pinion yokes for many street, racing, and heavy-duty off-road applications.
Product Features:
See More
Product Features:
- Fits Ford 8″
- 25 spline
- 1310 u-joint size
- Outside snap ring design
- 3.219″ snap ring span
- 1.062″ cap diameter
- U-bolt style
Dorman – Ring and Pinion Bearing Installation Kit (Part No.697-101)
from
$199.99
This differential bearing kit includes all necessary installation components for a differential ring and pinion on certain vehicle years, makes and models.
Product Features:
See More
Product Features:
- Convenient kit – this ring and pinion bearing installation kit includes all necessary components for a complete repair on certain vehicle applications
- Related repair – smart to have on hand when installing a differential ring and pinion
- Durable construction – built for reliable longevity, free of defects in materials and workmanship
- Trustworthy quality – backed by team of designers and engineers in the United States
Yukon Gear – 8" Ford O-Ring (Part No.30027)
from
$9.99
Yukon Mighty Seals use the latest design and manufacturing technologies to produce a precision fit that seals tight and lasts for years to come.
Product Features:
See More
Product Features:
- Pinion support O-ring
- Fits Ford 8″
Yukon Gear – Pinion Support Bolt for 8" and 9" Ford (Part No.33242)
from
$6.99
Yukon Gear & Axle manufactures a full line of top quality small parts to complete any job including ring gear bolts, crush sleeves, pinion nuts and washers, axle studs, thrust washers and much, much more. For all your differential small parts needs, look no further than Yukon.
Product Features:
See More
Product Features:
- 1.0″ long
- 3/8″-16
- Pinion support bolt for Ford 8″ and 9″ differentials
Yukon Gear – Dura Grip Positraction For Ford 8.8" With 28 Spline Axles (Part No.26005)
from
$834.99
The Yukon Dura Grip provides aggressive yet smooth traction to give you the confidence & performance you need. Get longer life and better traction with the heavy duty Yukon Dura Grip Positraction. The Yukon Dura Grip uses a nodular case and forged 4320 internals for added strength along with composite clutches for high performance and long life. All units are Rebuildable and many offer upgrades to increase aggressiveness for racing applications. Each unit carries a one year warranty against defects.
Product Features:
See More
Product Features:
- Fits Ford 8.8″ with 28 spline axles
- 4-spring, clutch style positraction
- Internal gears are manufactured using forged 4320 steel and cut to provide stronger teeth
- Fully rebuildable
- Assembled in the USA
Yukon Gear – Minor Install Kit for Ford 8.8" Differential (Part No.12035)
from
$62.99
Yukon Minimum Installation Kits are a low-cost solution for ring and pinion gear changes in newer vehicles where the bearings can be reused. Kits include all high-quality components for a smooth differential set up.
Product Features:
See More
Product Features:
- Fits Ford 8.8″
- Included are a pinion seal, crush sleeve , complete shim kit, marking compound and brush.
National – Shaft Repair Sleeve (Part No.99199)
from
$41.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
Yukon Gear – Dana 44, Ford 8" / 9", and Model 20 Side Gear Thrust Washer Replacement (Part No.33283)
from
$5.99
Yukon Gear & Axle manufactures a full line of top quality small parts to complete any job including ring gear bolts, crush sleeves, pinion nuts and washers, axle studs, thrust washers and much, much more. For all your differential small parts needs, look no further than Yukon.
Product Features:
See More
Product Features:
- Side gear thrust washer for Ford 8″, Ford 9″ and AMC Model 20
- 0.030″ thick
Yukon Gear – Grizzly Locker For Ford 8" With 31 Spline Axles (Part No.28007)
from
$941.99
The Yukon Grizzly Locker is the ultimate in locking differentials for street, off-road, & drag racing. Grizzly Lockers provide 100% power to both tires, while still allowing for disengagement while negotiating turns. The Yukon Grizzly locker is a mechanical locking differential. It features a forged case and 8620 internals for maximum strength. It’s patented design reduces common locker failures. All units assembled in the USA! All Grizzly Lockers are backed by the best warranty in the business! Yukon covers the replacement unit and covers any collaterally damaged parts and associated labor, up to $2,000!
Product Features:
See More
Product Features:
- Fits Ford 8″ with 31 spline axles
- Patented internal design reduces common locker failures
- 8620 internals for added strength
- Assembled in the USA
Yukon Gear – Spider Gear Kit for Ford 8.8", 31 Spline, Trac Loc Posi (Part No.16106)
from
$363.99
Yukon Gear & Axle spider gear kits feature higher quality materials and better manufacturing techniques than OEM to ensure a longer lasting spider gear set. Kit delivers everything needed for a complete and proper spider gear set replacement.
Product Features:
See More
Product Features:
- Spider gear kit
- Fit Ford 8.8″ Trac Loc positraction with 31 spline axles
- Includes two side gears, two pinion gears, cross pin shaft, cross pin bolt and spider gear thrust washers.
Yukon Gear – Crush Sleeve (Part No.33093)
from
$10.99
Yukon Gear & Axle manufactures a full line of top quality small parts to complete any job including ring gear bolts, crush sleeves, pinion nuts and washers, axle studs, thrust washers and much, much more. For all your differential small parts needs, look no further than Yukon.
Product Features:
See More
Product Features:
- Crush sleeve for AMC Model 35, Chrysler 7.25″ and 8.25″, Ford 8″ and GM 7.75″
- 0.495″ tall
Upgrade your 1969 Mercury Capri with Top-Quality Drivetrains
When it comes to maintaining or upgrading your 1969 Mercury Capri, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Mercury or enhancing its overall performance, Drivetrains are key to keeping your Capri functioning at its best. At Advance Auto Parts, we offer a wide selection of 67 Drivetrains for the 1969 Mercury Capri, designed to meet your needs without breaking the bank.
From
Drive Shafts and Axle
replacements to
Differentials
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Drivetrains for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Drivetrains for your 1969 Mercury Capri at great prices.
Our Drivetrains inventory for this model
ranges from just $3.99 to $941.99, with
an average price of $220.52.
Our 67 Drivetrains in stock come from 3 trusted brands, so you’re sure to find the right part for your 1969 Mercury Capri without overspending.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Drivetrain upgrades. Explore related part types like Fluids and Chemicals, Wipers and Related Products
and more to make sure your 1969 Mercury Capri is always ready to roll. We’re committed to providing you with everything you need to keep your Capri in top shape, all in one place.
Start shopping confidently below for your 1969 Mercury Capri!
Best-Selling Drive Shafts and Axles for 1969 Mercury Capris
Enhance the driving experience in your Mercury with 2 quality Drive Shafts and Axle components, starting at $26.99.
Yukon Gear – Outer Axle Seal For 8" Ford (Part No.30031)
from
$43.99
Outer axle seal for 8″ Ford.Yukon Mighty seal.
Product Features:
See More
Product Features:
- Outer axle seal
- Fits Ford 8″
Yukon Gear – Mighty Seal (Part No.30214)
from
$26.99
Axle seal.Yukon Mighty seal.
Product Features:
See More
Product Features:
- Rear axle seal
- Fits Ford 8″
- 2.264″ O.D.
- 1.365″ I.D.
Most Popular 1969 Mercury Capri Differentials
Customize your Mercury with 62 Differentials products
like Differential Oil,
Differential Pinion Seals, and
Differential Ring Gear Bolts, all
priced under $941.99.
Yukon Gear – 3 Qt – 80W90 Conventional Gear Oil with Posi Additive (Part No.15003)
from
$57.99
Union 76 gear oil is a conventional non-synthetic 80W90 formulation designed for all types of differentials. This kit includes three quarts of oil and a bottle of Yukon Limited Slip Friction modifier that reduces noise and chatter in clutch driven positraction units and limited slip differentials.
Product Features:
See More
Product Features:
- Includes three quarts of conventional oil and one 4oz bottle of Yukon positraction additive
Yukon Gear – 3 Qt – Penzoil 80W90 Conventional Gear Oil (Part No.15002)
from
$44.99
Union 76 gear oil is a conventional non-synthetic 80W90 formulation designed for all types of differentials.
Product Features:
See More
Product Features:
- Includes three quarts of conventional oil
Dorman – Help – Pinion Crush Sleeves (Part No.81056)
from
$6.49
This differential crush sleeve is designed to match the fit and function of the original sleeve on specified vehicles, and is engineered for durability and reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this differential crush sleeve is designed to match the fit and function of the original sleeve on specified vehicles
- Required replacement – when servicing the differential
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Yukon Gear – Copper Washer For Ford 9" & 8" Dropout Housing (Part No.32339)
from
$5.99
Replacement pinion seal for Dana 25, Dana 27, Dana 30, D36, Dana 44, & Dana 50 .Yukon Mighty seal.
Product Features:
See More
Product Features:
- Copper washer
- Fits Ford 8″ and 9″
Yukon Gear – Crush Sleeve (Part No.33093)
from
$10.99
Yukon Gear & Axle manufactures a full line of top quality small parts to complete any job including ring gear bolts, crush sleeves, pinion nuts and washers, axle studs, thrust washers and much, much more. For all your differential small parts needs, look no further than Yukon.
Product Features:
See More
Product Features:
- Crush sleeve for AMC Model 35, Chrysler 7.25″ and 8.25″, Ford 8″ and GM 7.75″
- 0.495″ tall
Yukon Gear – Ford 8" & 9" Standard Open, Ag, & Detroit Locker Ring Gear Bolt (Part No.33058)
from
$5.99
Ford 8″ & 9″ standard Open, AG, & Detroit locker ring gear bolt. 7/16″ head, .925″ long.
Product Features:
See More
Product Features:
- Ring gear bolt for Ford 8″ and 9″
- For use with standard open carrier, Auburn Gear limited slip and Detroit Locker
- 7/16″ head
- .925″ long
Yukon Gear – Ford 8" & 9" Standard Open, Ag, & Detroit Locker Ring Gear Bolt (Part No.33043)
from
$5.99
Ford 8″ & 9″ standard Open, AG, & Detroit locker ring gear bolt, 1.0″ long, Ford.
Product Features:
See More
Product Features:
- Ring gear bolt for Ford 8″ and 9″
- For use with standard open carrier, Auburn Gear limited slip and Detroit Locker
- 1.0″ long
Yukon Gear – Ford 8" & 9" Tracloc Ring Gear Bolt (Part No.33044)
from
$4.99
Ford 8″ & 9″ TracLoc ring gear bolt, 1-1/4″ long.
Product Features:
See More
Product Features:
- Ring gear bolt for Ford 8″ and 9″
- For use with Trac Loc limited slip
- 1.25″ long
Yukon Gear – Pinion Nut (Part No.33154)
from
$7.99
Yukon Gear & Axle manufactures a full line of top quality small parts to complete any job including ring gear bolts, crush sleeves, pinion nuts and washers, axle studs, thrust washers and much, much more. For all your differential small parts needs, look no further than Yukon.
Product Features:
See More
Product Features:
- Pinion nut for Ford 7.5″, 8″ and 9″
- 3/4″ x 20 thread
- 1 1/6″ socket
Yukon Gear – Redline Synthetic "Shock Proof" Oil with Positraction Additive – 4 Quarts (Part No.15005)
from
$148.99
Redline Heavy Shockproof Gear Oil is formulated to provide lasting protection. This kit includes four quarts of oil and a bottle of Yukon Limited Slip Friction modifier that reduces noise and chatter in clutch driven positraction units and limited slip differentials.
Product Features:
See More
Product Features:
- Includes four quarts of Redline Shockproof oil and one 4oz bottle of Yukon positraction additive
Yukon Gear – Dana 44, Ford 8" / 9", and Model 20 Side Gear Thrust Washer Replacement (Part No.33283)
from
$5.99
Yukon Gear & Axle manufactures a full line of top quality small parts to complete any job including ring gear bolts, crush sleeves, pinion nuts and washers, axle studs, thrust washers and much, much more. For all your differential small parts needs, look no further than Yukon.
Product Features:
See More
Product Features:
- Side gear thrust washer for Ford 8″, Ford 9″ and AMC Model 20
- 0.030″ thick
Yukon Gear – Redline Synthetic "Shock Proof" Oil – 3 Quarts (Part No.15000)
from
$99.99
Redline Heavy Shockproof Gear Oil is formulated to provide lasting protection.
Product Features:
See More
Product Features:
- Includes three quarts of Redline Shockproof oil
Yukon Gear – Pinion Support Bolt for 8" and 9" Ford (Part No.33242)
from
$6.99
Yukon Gear & Axle manufactures a full line of top quality small parts to complete any job including ring gear bolts, crush sleeves, pinion nuts and washers, axle studs, thrust washers and much, much more. For all your differential small parts needs, look no further than Yukon.
Product Features:
See More
Product Features:
- 1.0″ long
- 3/8″-16
- Pinion support bolt for Ford 8″ and 9″ differentials
Yukon Gear – Redline Synthetic "Shock Proof" Oil – 4 Quarts (Part No.15004)
from
$137.99
Redline Heavy Shockproof Gear Oil is formulated to provide lasting protection.
Product Features:
See More
Product Features:
- Includes four quarts of Redline Shockproof oil
Yukon Gear – 8" Ford O-Ring (Part No.30027)
from
$9.99
Yukon Mighty Seals use the latest design and manufacturing technologies to produce a precision fit that seals tight and lasts for years to come.
Product Features:
See More
Product Features:
- Pinion support O-ring
- Fits Ford 8″
Yukon Gear – Dropout Housing Stud For Ford 8" & 9" (Part No.32338)
from
$7.99
Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses the latest designs and manufacturing technologies to provide a quiet running gear that is strong and easy to set up. All Yukon ring & pinion sets come standard with a one-year warranty.
Product Features:
See More
Product Features:
- Housing stud
- Fits Ford 8″ and 9″
Yukon Gear – Pinion Depth Shims for Ford 8" (Part No.55055)
from
$31.99
Yukon shim kits are precision machined and tailored for each individual application to ensure you have the right shims for every set up.
Product Features:
See More
Product Features:
- Pinion depth shims for Ford 8″
Yukon Gear – Heavy Duty Carrier Bearing Puller Set (Part No.56072)
from
$883.99
Yukon Gear & Axle tools are made to the highest industry standard.
Product Features:
See More
Product Features:
- Works on popular Ford, GM, Chrysler, and many other housings
- For differentials with XHD Clamshells
- Can accommodate up to one-ton applications
- Comes with a handy bench-top stand
- This top-quality differential tool is built to last
Yukon Gear – Pilot Bearing for Ford 8" (Part No.18043)
from
$40.99
Yukon Gear & Axle manufactures a full line of top quality small parts to complete any job including ring gear bolts, crush sleeves, pinion nuts and washers, axle studs, thrust washers and much, much more. For all your differential small parts needs, look no further than Yukon.
Product Features:
See More
Product Features:
- Pilot bearing
- Fits Ford 8″
Yukon Gear – 8" Ford Pilot Bearing Retainer (Part No.33254)
from
$13.99
Yukon Gear & Axle manufactures a full line of top quality small parts to complete any job including ring gear bolts, crush sleeves, pinion nuts and washers, axle studs, thrust washers and much, much more. For all your differential small parts needs, look no further than Yukon.
Product Features:
See More
Product Features:
- Pilot bearing retainer for Ford 8″
Yukon Gear – Trac Loc Spring Plate for Ford 9" & 8 (Part No.33517)
from
$10.99
Yukon Gear & Axle manufactures a full line of top quality small parts to complete any job including ring gear bolts, crush sleeves, pinion nuts and washers, axle studs, thrust washers and much, much more. For all your differential small parts needs, look no further than Yukon.
Product Features:
See More
Product Features:
- Trac Loc spring plate for Ford 8″ and 9″
Yukon Gear – Pinion Gear and Thrust Washer for 8" and 9" Ford, Model 20, and 7.25" Chrysler (Part No.33301)
from
$4.99
Yukon Gear & Axle manufactures a full line of top quality small parts to complete any job including ring gear bolts, crush sleeves, pinion nuts and washers, axle studs, thrust washers and much, much more. For all your differential small parts needs, look no further than Yukon.
Product Features:
See More
Product Features:
- Pinion gear thrust washer for Ford 8″, Ford 9″ and Chrysler 7.25″
Yukon Gear – Grizzly Locker For Ford 8" With 31 Spline Axles (Part No.28007)
from
$941.99
The Yukon Grizzly Locker is the ultimate in locking differentials for street, off-road, & drag racing. Grizzly Lockers provide 100% power to both tires, while still allowing for disengagement while negotiating turns. The Yukon Grizzly locker is a mechanical locking differential. It features a forged case and 8620 internals for maximum strength. It’s patented design reduces common locker failures. All units assembled in the USA! All Grizzly Lockers are backed by the best warranty in the business! Yukon covers the replacement unit and covers any collaterally damaged parts and associated labor, up to $2,000!
Product Features:
See More
Product Features:
- Fits Ford 8″ with 31 spline axles
- Patented internal design reduces common locker failures
- 8620 internals for added strength
- Assembled in the USA
Yukon Gear – Grizzly Locker For Ford 8" With 28 Spline Axles (Part No.28006)
from
$931.99
The Yukon Grizzly Locker is the ultimate in locking differentials for street, off-road, & drag racing. Grizzly Lockers provide 100% power to both tires, while still allowing for disengagement while negotiating turns. The Yukon Grizzly locker is a mechanical locking differential. It features a forged case and 8620 internals for maximum strength. It’s patented design reduces common locker failures. All units assembled in the USA! All Grizzly Lockers are backed by the best warranty in the business! Yukon covers the replacement unit and covers any collaterally damaged parts and associated labor, up to $2,000!
Product Features:
See More
Product Features:
- Fits Ford 8″ with 28 spline axles
- Patented internal design reduces common locker failures
- 8620 internals for added strength
- Assembled in the USA
Top Picks for 1969 Mercury Capri Universal Joints
Upgrade Mercury Capris with top-quality Universal Joints parts, including 3 OEM and aftermarket selections for your 1969 model.
Yukon Gear – 1310 U/Joint With Zerk Fitting On Cross (Part No.42008)
from
$44.99
Yukon 1310 U/Joint with zerk fitting on cross. 3.219″ snap ring span, 1.062″ cap diameter. Outside snap ring.
Product Features:
See More
Product Features:
- Cover gasket
- Fits 8.2″ in Buick, Oldsmobile and Pontiac
Yukon Gear – 1310 To 1330 Adapter U/Joint (Part No.42005)
from
$59.99
Yukon 1310 to 1330 adapter U/Joint. The 1310 side has a 3.219″ span and 1.062″ caps. The 1330 side has a 3.625″ span and 1.062″ caps. Both sides are outside snap ring.
Product Features:
See More
Product Features:
- Fits 1988-1998 F350
- 4340 Chromoly
- Left hand inner axle
- 35 spline
- 36.97″ from end of splines to center of u-joint bore
Yukon Gear – 1310 Lifetime U/Joint (Part No.42003)
from
$57.99
1310 Yukon Lifetime U/joint. 1.718″ snap ring span, 1.062″ cap diameter. Inside snap ring.
Product Features:
See More
Product Features:
- Fits standard rotation Dana Spicer 44 TJ Rubicon
- 8.50″ ring gear diameter
- 26 spline pinion
- 10 ring gear bolts
- 4.88 ratio
FAQs for 1969 Mercury Capri Drivetrains
Which Drivetrains are best-sellers for 1969 Mercury Capris?
Out of 67 Drivetrains that fit 1969 Mercury Capris, the following parts are the top sellers:
- 3 Qt – 80W90 Conventional Gear Oil with Posi Additive (11645418) – $57.99
- 3 Qt – Penzoil 80W90 Conventional Gear Oil (11644279) – $44.99
- Pinion Crush Sleeves (22140006) – $6.49
What’s the price range for 1969 Mercury Capri Drivetrains?
Drivetrain prices for the 1969 Mercury Capri start at $3.99 and go up to $941.99 for the most premium parts.
What’s the average price of a Drivetrain for a 1969 Mercury Capri?
The average price for Drivetrains for the 1969 Mercury Capri is $220.52. Keep in mind the variety of part types within our Drivetrain category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Drivetrains for other Mercury Capri model years?
What are the cheapest Drivetrains for my 1969 Mercury Capri?
The cheapest 1969 Mercury Capri Drivetrains we carry in stock are:
- Trac Loc Ring Gear Bolt Washer For 8" And 9" Ford (11643118) – $3.99
- Ford 8" & 9" Tracloc Ring Gear Bolt (11642940) – $4.99
- Pinion Gear and Thrust Washer for 8" and 9" Ford, Model 20, and 7.25" Chrysler (11642366) – $4.99
- Copper Washer For Ford 9" & 8" Dropout Housing (11643432) – $5.99
- Ford 8" & 9" Standard Open, Ag, & Detroit Locker Ring Gear Bolt (11642866) – $5.99
What types of Drivetrains do you sell for my 1969 Mercury Capri?
As of 6/2/26, these are some of the most in-demand types of Drivetrains for a 1969 Mercury Capri:
Can I get help with 1969 Mercury Capri Drivetrain orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Mercury Drivetrains and more.
What is your return policy for Mercury Capri Drivetrains?
Advance Auto Parts keeps returns simple. For new Mercury Capri Drivetrains and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
