1969 Jeep Commando Drivetrains
More 1969 Jeep Commando Drivetrains Categories
If you’re looking for an original Drivetrains replacement for a 1969 Jeep Commando, you can search through our selection below. You’ll also find aftermarket and OEM Drivetrains to meet your needs.
Essential 1969 Jeep Commando Drivetrains
Motive Gear – Differential Carrier Gear Kit (Part No.706027XR)
Yukon Gear – Zip Locker For Dana 44 With 30 Spline Axles, 3.73 & Down (Part No.34018)
from
$1302.99
The Yukon Zip Locker is the latest in on-demand traction. Its air-operated design allows you to switch from an open differential to 100% lockup when you need it, giving you the ultimate in driver selectability. The Yukon Zip locker is an air operated locker that provides selectable traction for off road or street use. This unit features 4320 Chrome Moly internals for added strength. Assembled in the USA! compressor sold separately. All Zip Lockers are backed by the best warranty in the business! All Zip Lockers come with a six (6) year warranty, including any collaterally damaged parts and associated labor, up to $2,000, for the first two (2) years.
Product Features:
See More
Product Features:
- Fits Dana Spicer 44 with 30 spline axles
- 3.73 and down ratio only
- Forged case and 8620 internals for added strength
- Works with a variety of air delivery systems
- Assembled in the USA
Yukon Gear – Bearing Race Driver (Part No.56022)
from
$188.99
Bearing race driver. No return.
Product Features:
See More
Product Features:
- Bearing race driver
- Fits M86610 race
- All steel construction
Yukon Gear – Master Overhaul Kit For Dana 44 Differential With 19 Spline (Part No.14022)
from
$448.99
Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. Yukon offers more tailor-made kits than any other manufacturer in the industry to meet your specific installation needs. This kit uses Timken bearings and races along with high quality seals and small parts. Included in this kit are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), Thread locking compound, marking compound with brush, and gasket. Yukon’s Master Overhaul kits are the most comprehensive and complete kits on the market. They do extensive research to ensure that every kit is specially tailored to your application.
Product Features:
See More
Product Features:
- Fits Dana Spicer 44 with 19 spline axles
- Included are Timken bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, thread locker, marking compound with brush, and gasket.
Felpro – Axle Housing Cover Gasket (Part No.RDS 55019)
from
$6.79
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Unsurpassed quality you can trust
- Validated for fit, form and function
- Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
National – Multi Purpose Seal (Part No.5778V)
from
$69.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Design type: spring loaded; multi-lip
- Temperature range: -100°F to 450°F; -73°C to 232°C
- Resistant to hydrocarbon/oxygenate blends and provides superior performance
- Provides excellent dry running capabilities, low coefficient of friction and excellent resistance to chemicals
- Delivers quality and reliable performance for every type of repair
Yukon Gear – O-Ring For Dana 30 & Model 35 Zip Locker Seal Housing (Part No.34005)
Yukon Gear – Replacement Trail Repair Kit For Dana 30 And 44 With 1350 Size U/Joint And Straps (Part No.32280)
from
$481.99
Yukon replacement trail repair kit for Dana 30 and 44 with 1350 size U/joint and straps. This kit comes with a yoke, U/joint, pinion seal, U/bolt or strap kit, pinion nut, and pinion nut washer (if applicable).
Product Features:
See More
Product Features:
- Fits Dana Spicer 30 and 44
- 1350 u-joint size
- Kit includes yoke, U-joint, pinion seal, pinion nut and washer, straps, bolts and threadlocker
National – Bearings (Part No.02872)
from
$29.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Yukon Gear – Dana 30 Side Gear Thrust Washer (Part No.33284)
from
$10.99
Dana 25, Dana 27, & Dana 30 side gear Thrust washer.
Product Features:
See More
Product Features:
- Side gear thrust washer for Dana Spicer 25, 27, 30 and AMC Model 35
- 1.560″ I.D.
- Fits standard open differentials only
Yukon Gear – Set Up Bearing (Part No.56037)
from
$189.99
Set-up carrier bearing (2 bearings, no races) 25590. No return.
Product Features:
See More
Product Features:
- Set up bearing kit
- Fits Dana Spicer 44
- Easily slips on and off carrier journals to allow for easier carrier shim adjustment
Yukon Gear – Dana 44 Cover Gasket Replacement (Part No.23006)
Yukon Gear – Dana 30 / 44 Roll Pin Replacement (Part No.33312)
from
$12.99
Dana 30 & Dana 44 roll PIN, 0.235″ DIA, for cross pin shaft.
Product Features:
See More
Product Features:
- Roll pin for Dana Spicer 30 and Dana Spicer 44
- 0.235″ diameter
National – Shaft Repair Sleeve (Part No.99125)
from
$27.49
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
National – Bearings (Part No.02820)
from
$12.29
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Omix – Axle Snap Ring (Part No.18670.35)
from
$1.29
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year manufacturers warranty.
Product Features:
See More
Product Features:
- OE Style
- Direct Fit
- Steel
- Corrosion Resistant
- Limited 5 Year Warranty
Yukon Gear – Powr Lok Flat Driven Plate For Dana 44 (Part No.16173)
Motive Gear – Drive Shaft Pinion Yoke (Part No.MG1310-6010)
Yukon Gear – High Performance Ring & Pinion Replacement Gear Set For Dana 30 In A 3.54 Ratio (Part No.24018)
from
$439.99
Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses the latest designs and manufacturing technologies to provide a quiet running gear that is strong and easy to set up. All Yukon ring & pinion sets come standard with a one-year warranty.
Product Features:
See More
Product Features:
- Fits standard rotation Dana Spicer 30 without crush sleeve
- 7.20″ ring gear diameter
- 26 spline pinion
- 10 ring gear bolts
- 3.54 ratio
Yukon Gear – Positraction Internals For Dana 44 Dura Grip Posi, 30 Spline (Part No.16168)
from
$399.99
Yukon positraction internals for Dana 44 Dura Grip posi, 30 spline. Does not include clutches. Does NOT fit Trac Loc or Powr Lok. Fits Dura Grip ONLY.
Product Features:
See More
Product Features:
- Spider gear kit
- Fits Dana Spicer 44 with Dura Grip positraction
- Includes two side gears, four pinion gears, cross pin shaft, roll pin and spider gear thrust washers.
National – Multi Purpose Seal (Part No.482208)
from
$7.79
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Yukon Gear – 1310 To Mechanics 3R Adapter U/Joint (Part No.42013)
Yukon Gear – Drive Flange Cap For Dana 44 (Part No.32134)
Yukon Gear – Replacement Redi-Sleeve Yoke Saver For Dana 25, Dana 27, Dana 30, Dana 44, Dana 50 (Part No.30222)
from
$182.99
Replacement redi-sleeve yoke saver for Dana 25, Dana 27, Dana 30, Dana 44, Dana 50 .Yukon Mighty seal.
Product Features:
See More
Product Features:
- Pinion Redi-sleeve
- Fits Dana Spicer 25, 27, 30, 4 and 50
Yukon Gear – Dura Grip For Dana 44, 30 Spline, 3.92 & Up (Part No.26027)
from
$809.99
The Yukon Dura Grip provides aggressive yet smooth traction to give you the confidence & performance you need. Get longer life and better traction with the heavy duty Yukon Dura Grip Positraction. The Yukon Dura Grip uses a nodular case and forged 4320 internals for added strength along with composite clutches for high performance and long life. All units are Rebuildable and many offer upgrades to increase aggressiveness for racing applications. Each unit carries a one year warranty against defects.
Product Features:
See More
Product Features:
- Fits Dana Spicer 44 with 30 spline axles
- 3.92 ratio and up only
- 4-spring, clutch style positraction
- Internal gears are manufactured using forged 4320 steel and cut to provide stronger teeth
- Fully rebuildable
- Assembled in the USA
Yukon Gear – The Carrier Bearing Puller (Part No.56034)
from
$689.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to most standard one ton applications. This unit is works with differentials up to one-ton applcations. It is not compatible with Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.
Product Features:
See More
Product Features:
- Carrier bearing puller
- Works with an impact gun to safely and easliy remove carrrier bearings
- Not compatible with Dana 70HD, Dana 80, Ford 10.25″ and 10.5″ or Gm and Chrysler 11.5″ applications
Dorman – Differential Pinion Yoke Assembly (Part No.697-542)
from
$111.99
Drive shaft pinion yoke corroded or damaged? This pinion yoke directly replaces the original equipment on specific vehicle years, makes and models to restore smooth driving.
Product Features:
See More
Product Features:
- Direct replacement – this drive shaft pinion yoke directly replaces the original equipment on specified vehicles
- Effective fix – replacement restores proper connection between drive shaft and differential
- Rigorously tested – designed and evaluated to assure safe, reliable operation
- Trustworthy quality – backed by team of engineers and inspectors in the United States
Yukon Gear – Dana 44 Pinion Gear Thrust Washer (Part No.33281)
from
$4.99
Dana 44, GM55P & 8.2″ GM pinion gear Thrust washer.
Product Features:
See More
Product Features:
- Pinion gear thrust washer for Dana Spicer 44, GM 8.2″ and 1955-1964 GM passenger car
Popular 1969 Jeep Commando Drivetrains Categories
1969 Jeep Commando Drivetrains
You count on your 1969 Jeep Commando to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 275 Drivetrains ranging in price from $1.29 to $1,302.99, you’re sure to find everything you need for your 1969 Jeep Commando.
Brands matter. If you want to shop a specific Drivetrains brand, we stock 17 different brands like Valvoline, Moog, and Driveworks. 1969 Jeep Commando Drivetrains start as low as $1.29!
One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 1,247 extensive product reviews on 1969 Jeep Commando Drivetrains. Some of the top-rated Drivetrains products we carry are Greaseable Super Strength Universal Joint with 4.6 stars and Universal Joint with 4.9 stars.
Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 1969 Jeep Commando below to get started!
Top-Rated Drivetrains Brands For Your 1969 Jeep Commando
Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1969 Jeep Commando running right for years to come. In our inventory you’ll find brands like Valvoline, Moog, Driveworks, and even more.
Popular Valvoline Drivetrains
You’ll find popular Valvoline brand products across Differentials. All are waiting to get your 1969 Jeep Commando back on the road. Some of the top-rated Valvoline products in these categories are:
from
$12.79
(446)
MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Quart
Differential Oil
FAQs for 1969 Jeep Commando Drivetrains
What are the most purchased Drivetrains for the 1969 Jeep Commando?
Out of 275 Drivetrains for the 1969 Jeep Commando, the most popular in our inventory are:
What are the top-rated 1969 Jeep Commando Drivetrains?
Top-rated Drivetrains for your 1969 Jeep Commando based on customer reviews/ratings are:
from
$32.99
(37)
Greaseable Super Strength Universal Joint
“grease fitting I like location dont like needle design to grease should be regular design fitting”
from
$28.99
(12)
Universal Joint
“No problems with Installation and appears to be quality part! Great for my old School Street Car!”
from
$6.49
(10)
Axle Housing Cover Gasket
“fit perfectly and was easy to work with.no more leaking rear differential.”
