1969 Chevrolet Impala Brake Parts

Essential 1969 Chevrolet Impala Brake Parts

Carquest Wearever – Brake Hold-Down Spring Cup (Part No.1133-2)

Brake Hold-Down Spring Cup

from

$3.79
The brake hardware should be inspected and replaced regularly to ensure reliable, efficient performance. The hold down spring top cups are designed to provide direct and simple replacement.

Product Features:
  • This part matches Original Equipment (OE) quality specifications
  • Fast and efficient replacement
  • Eliminates heat and corrosion deterioration
See More

Carquest Wearever – Brake Drum (Part No.YH140022)

Brake Drum

from

$82.99
CARQUEST Wearever Brake Drums are designed to meet or exceed original equipment design delivering superior stopping power. Proper harmonic design and balance that eliminates noise and enhances pedal feel. CARQUEST Wearever Brake Drums are designed to dissipate heat helping to eliminate brake fade and increase the life of your brake shoes. Ready to install out of the box to save you time.

Product Features:
  • Manufactured to exacting quality and dimensional specifications for Superior Stopping Power
  • Exceeds ISO manufacturing guidelines. (International Organization for Standardization)
  • OE design to dissipate heat, increasing brake shoe life.
  • Proper harmonic design and balance helps to reduce brake noise.
  • Optimal metallurgy and casting thickness to preventing warping
  • Ready for immediate “out-of-the-box” installation (after cleaning) Advance Auto Parts Drum Tips:
  • Recommended using Wearever Brake Clean to remove residual manufacturing oils prior to installation.
  • Always use a torque wrench to tighten wheel bolts to the manufacturers” specifications to prevent pedal pulsation.
  • Always replace drums in pairs to improve stopping power.
See More

Wearever – Vacuum Brake Booster: Without Master Cylinder (Part No.54-71201)

Vacuum Brake Booster: Without Master Cylinder

from

$107.99
CARDONE Remanufactured Power Brake Boosters are re-engineered, built and tested to match O.E. performance. Original designs are scrutinized for potential improvement and, where applicable, design upgrades are implemented to produce a more durable part than the original. All units are 100% tested to ensure perfect fit and function.

Product Features:
  • 100% O.E. quality seals, diaphragms and check valves are installed on every unit for like-new performance and reliability.
  • Exclusive rust-prohibitive finishing process extends unit life.
  • Master cylinder output rods are pre-adjusted (when included) for easier and faster installation.
  • All units are 100% tested to ensure reliable performance.
  • Guaranteed fit and function.
See More

Carquest Wearever – Drum Brake Adjusting Screw Assembly with Tip (Part No.1530)

Drum Brake Adjusting Screw Assembly with Tip

from

$8.29
Brakes are designed as a system and all the parts need to work together for best performance. The braking system is arguably its most important system, so you want to be sure it’s working properly at all times. With this tool, you can be sure the brake adjustments are occurring at the proper intervals.

Product Features:
  • This part matches Original Equipment (OE) quality specifications
  • Corrosion resistant coating for long-lasting durability against harsh roads
  • Manufactured to restrain high tolerances with quality materials
  • Direct replacement for a proper fit
  • Helps deliver a quieter, more efficient braking system
See More

Dorman – Help – Parking Brake Cable Equalizer (Part No.21121)

Parking Brake Cable Equalizer

from

$21.49
Parking brake cable equalizer corroded? This parking brake cable equalizer directly replaces the original manufacturer part to restore proper operation.

Product Features:
  • Direct replacement – this parking brake cable equalizer matches the fit, function and performance of the original manufacturer cable
  • Restores performance – enables proper operation of parking brake by equalizing cable tension
  • Thoroughly tested – must pass strict material and torque testing to ensure quality and longevity
  • Trustworthy quality – backed by team of engineers and inspectors in United States
See More

Wagner – Brake Auto Adjuster Hardware Kit (Part No.H2628)

Brake Auto Adjuster Hardware Kit

from

$24.19
A wheel drum hardware kit with adjuster and adjuster springs. Replace worn self-adjusting levers and frozen adjusting screws for proper drum brake self-adjustments.
See More

Carquest Wearever – Drum Brake Wheel Cylinder (Part No.WCA37116)

Drum Brake Wheel Cylinder

from

$21.99
This direct replacement drum brake wheel cylinder was specifically engineered to match the fit, function and performance of the original wheel cylinder on particular vehicles. It is manufactured and tested for quality assurance.

Product Features:
  • Ideal replacement – specifically engineered to be direct match for original drum brake wheel cylinder on particular vehicles
  • Cost-effective fix – replacement of cylinder while servicing drum brakes is fastest, surest way to ensure brake performance
  • Quality materials – made with high-quality EPDM rubber cups and boots for long-lasting performance
  • Professionally tested – wheel cylinder bores are surface-tested to ensure an optimum sealing surface for the pressure cups
See More

Carquest Wearever – Disc Brake Caliper Guide Pin Kit (Part No.H5004)

Disc Brake Caliper Guide Pin Kit

from

$4.99
Brakes are designed as a system and all the parts need to work together for best performance. Industry brake service experts agree – when brake friction materials are ready to be replaced, the hardware is too. Caliper Guide Pins are important to replace because they hold the brake piston in place to create effective stopping performance.

Product Features:
  • This part matches Original Equipment (OE) quality specifications
  • Easy and fast replacement
  • Helps deliver a quieter, more efficient braking system
  • Corrosion resistant coating for long-lasting durability against harsh roads
  • Manufactured with quality materials to suppress high stress levels
See More

Carquest Premium Gold – Semi-Metallic Brake Pads – (4-Pad Set) (Part No.GMKD628)

Semi-Metallic Brake Pads - (4-Pad Set)

from

$33.49
Carquest Premium Gold brake pads are original equipment replacement brake pads that provide consistent, quiet, and clean braking.

Product Features:
  • Application-specific formulations designed for extended pad life and clean wheels
  • Multi-layer shim for near silent braking
  • OE designed slots and chamfers for consistent performance
  • Hardware included on popular and late-model applications
See More

KAI – Parking Brake Strut (Part No.GMK4030519641)

Parking Brake Strut

from

$14.99
New Goodmark Park Brake Equalizer

Product Features:
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Carquest Wearever – Drum Brake Hardware Kit (Part No.7018)

Drum Brake Hardware Kit

from

$10.99
Hardware consists of a variety of parts designed to assist in restoring your brake system such as, Anti-rattle clips, seals, pins, and dust boots along with drum shoe return springs, hold down springs, and adjuster assemblies, help to maintain consistent, balanced braking. Change your hardware with the brake shoes to ensure maximum performance. Industry experts agree – When brake friction materials are ready to be replaced, the hardware should also be replaced.

Product Features:
  • This part matches Original Equipment (OE) quality specifications
  • Contains all the necessary hardware for easy installation
  • Manufactured to restrain high tolerances with quality materials
  • Helps deliver a quieter, more efficient braking system
  • Restores brakes to like-new performance
See More

Carquest Wearever – Drum Brake Wheel Cylinder Link (Part No.1422-2A)

Drum Brake Wheel Cylinder Link

from

$3.79
Brakes are designed as a system and all the parts need to work together for best performance. The braking system is arguably its most important system, so you want to be sure it’s working properly at all times. With this tool, you can be sure the brake adjustments are occurring at the proper intervals.

Product Features:
  • Increases the Life Span and Improves the Performance of the Drum Brakes
  • Eliminates heat and corrosion deterioration
  • Restores brakes to like-new performance
See More

Carquest Premium – Door Jamb Switch (Part No.SAA3759)

Door Jamb Switch

from

$10.49
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Wearever – Wheel Cylinder Kit (Part No.WCKA35629)

Wheel Cylinder Kit

from

$8.49
The components in this drum brake wheel cylinder kit are designed to match the original parts required to repair the wheel cylinder on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – the components in this drum brake wheel cylinder kit are designed to match the original parts required to repair the wheel cylinder on specified vehicles
  • Ideal solution – this kit is a reliable replacement for original components that have failed due to wear
  • Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Carquest Wearever – Brake Hose Assembly: Copper Washers Included (Part No.BHA380095)

Brake Hose Assembly: Copper Washers Included

from

$25.99
Each Carquest Premium brake hose assembly is precision engineered to match the original fit and includes brackets, grommets, molded plastic guards, wire clips and protective sleeves as required to ensure that all wearable parts are restored to original condition. Carquest Premium brake hoses meet or exceed Department of Transportation (DOT), Federal Vehicle Safety Standards (FMVSS 106) and Society of Automotive Engineers (SAE J1401) standards to ensure a reliable and long-lasting repair.

Product Features:
  • Brake hoses with banjo end fittings include new copper washers to ensure proper sealing
  • Tensile minimum load holds up to 1800 N
  • All end fittings are electroplated with eco-friendly material that delivers superior corrosion and rust resistance
  • Designed based on requirements and testing of SAE J1401, resulting in high quality brake hoses
  • Every brake hose is subjected to a high-pressure quality assurance test before leaving the factory, ensuring trouble-free installation and operation
  • Brand may vary by location
See More

Carquest Wearever – Brake Hose Assembly: Copper Washers Included (Part No.BHA86576)

Brake Hose Assembly: Copper Washers Included

from

$25.99
Each Carquest Premium brake hose assembly is precision engineered to match the original fit and includes brackets, grommets, molded plastic guards, wire clips and protective sleeves as required to ensure that all wearable parts are restored to original condition. Carquest Premium brake hoses meet or exceed Department of Transportation (DOT), Federal Vehicle Safety Standards (FMVSS 106) and Society of Automotive Engineers (SAE J1401) standards to ensure a reliable and long-lasting repair.

Product Features:
  • Brake hoses with banjo end fittings include new copper washers to ensure proper sealing
  • Tensile minimum load holds up to 1800 N
  • All end fittings are electroplated with eco-friendly material that delivers superior corrosion and rust resistance
  • Designed based on requirements and testing of SAE J1401, resulting in high quality brake hoses
  • Every brake hose is subjected to a high-pressure quality assurance test before leaving the factory, ensuring trouble-free installation and operation
  • Brand may vary by location
See More

Carquest Wearever – New Brake Master Cylinder: With Reservoir, Exact Fit, 1" Bore (Part No.MCA630650)

New Brake Master Cylinder: With Reservoir, Exact Fit, 1" Bore

from

$141.99
This brake master cylinder is precision-engineered to match the design, function, and performance of the original master cylinder on specific vehicle years, makes and models. It is made of new, high-quality materials for a safe, durable replacement.

Product Features:
  • Precise replacement – cylinder housing is constructed to match the casting material of the original part and ensure similar performance
  • Durable design – all rubber components are made of high-quality EPDM compound for resistance to glycol-based brake fluid
  • 100% new – made entirely of new materials, not remanufactured, to ensure highest quality and safety
  • Strict specifications – made to meet rigorous SAE International standards
See More

Carquest Wearever – Brake Master Cylinder MCA21000: New, With Reservoir (Part No.MCA21000)

Brake Master Cylinder MCA21000: New, With Reservoir

from

$75.99
Cylinder casting is constructed from high-quality cast iron or aluminum for long-lasting durability

Product Features:
  • All rubber parts are of high-quality EPDM compound for resistance to DOT3 or DOT4 brake fluid
  • Key components like spring are from high and stable quality suppliers.
  • Products are machined by CNC machines with strictly quality control.
  • Parts assembled in a clean environment and all parts were thoroughly cleaned before assembly.
  • Direct replacement for a proper fit
  • Manufactured to strict engineering quality standards, meets S.A.E. specifications
  • Each product is 100% tested on production lines and sampling tested prior to shipment
  • Key working procedure used CNC, positioning accuracy ± 0.005/300 mm, repeat positioning accuracy + /-0.007 mm
  • Main cylinder hole of measured by the 0.003 mm distinguish precision pneumatic instruments, surface roughness instrument and endoscope testing
See More

Carquest Premium Gold – Ceramic Brake Pads – Front (4-Pad Set) (Part No.GNAD699)

Ceramic Brake Pads - Front (4-Pad Set)

from

$52.99
Carquest Premium Gold brake pads are original equipment replacement brake pads that provide consistent, quiet, and clean braking.

Product Features:
  • Application-specific formulations designed for extended pad life and clean wheels
  • Multi-layer shim for near silent braking
  • OE designed slots and chamfers for consistent performance
  • Hardware included on popular and late-model applications
See More

PowerStop – Z16 Low-Dust Ceramic Brake Pads (Part No.16-699)

Z16 Low-Dust Ceramic Brake Pads

from

$35.99
The Power Stop Z16 Evolution ceramic brake pads feature a ceramic formula designed to maximize stopping power while reducing brake dust & eliminating noise. Using OE positive mold technology along with a thermal scorched pad surface, Z16 pads maintain consistent wear and performance while ensuring a fast break-in. The Z16 Evolution ceramic brake pads are an affordable stock replacement for all vehicles.

Product Features:
  • Low-dust ceramic formula designed to maximize stopping power and keep wheels clean
  • Positive mold technology for consistent wear and performance
  • Thermal scorched pad surface for a fast break-in
  • Chamfered and slotted to ensure noise-free braking
  • Powder coated backing plate resists rust and corrosion to provide extended pad life
  • Multi-Layer rubberized shims provide virtually noise-free braking
See More

Carquest Wearever – Brake Hold-Down Spring (Part No.1150-2)

Brake Hold-Down Spring

from

$5.99
The brake hardware should be inspected and replaced regularly to ensure reliable, efficient performance. The hold down springs are designed to secure the brake shoes to the backing plate while allowing proper brake shoe movement.

Product Features:
  • This part matches Original Equipment (OE) quality specifications
  • Manufactured with quality materials to suppress high stress levels
  • Maintains safe movement and effective stopping performance
See More

Carquest Wearever – Drum Brake C Washer (Part No.1175-2)

Drum Brake C Washer

from

$2.49
Brakes are designed as a system and all the parts need to work together for best performance. Industry brake service experts agree – when brake friction materials are ready to be replaced, the hardware is too. A complete brake job that includes new hardware goes a long way toward preventing comebacks.

Product Features:
  • This part matches Original Equipment (OE) quality specifications
  • Manufactured to restrain high tolerances with quality materials
See More

Dorman – First Stop – Brake Spring Hold Down Pin Clip (Part No.HW1175)

Brake Spring Hold Down Pin Clip

from

$1.99
Our Brake Spring Hold Down Pin Clip is constructed from high-quality materials for a prolonged service life. Replacement restores the brake system to proper operation, helping to ensure road safety.

Product Features:
  • Corrosion-resistant for long-lasting durability against harsh road and weather conditions
  • Heat-resistant to withstand high temperatures generated by the brake system
  • Direct replacement for a proper fit
  • Manufactured to strict engineering quality standards
See More

Cardone – Brake Master Cylinder Bleeding Tool (Part No.10-5000MCB)

Brake Master Cylinder Bleeding Tool

from

$15.99
CARDONE Master Cylinder Bench Bleeder Tool cuts typical bleeding procedures in half and is a more effective way to purge the brake system of air than other bleeding procedures. This handy, innovative tool is a must, just as bench bleeding is for removing all the air from your brake system, allowing you to spend less time in the garage, and more time on the road.

Product Features:
  • Each unit is 100% new, providing consistent performance when servicing your brake system
  • Easy to transfer for on-the-spot master cylinder bleeding
  • Fluid measurements clearly displayed on each unit in both ounces and milliliters for convenience
  • Easy to clean to ensure no cross contamination
  • Durability for long lasting performance
See More

Carquest Wearever – Brake Spring Hold-Down Pin (Part No.1107-2)

Brake Spring Hold-Down Pin

from

$2.49
Brakes are designed as a system and all the parts need to work together for best performance. Industry brake service experts agree – when brake friction materials are ready to be replaced, the hardware is too. A complete brake job that includes new hardware goes a long way toward preventing comebacks.

Product Features:
  • This part matches Original Equipment (OE) quality specifications
  • Manufactured with quality materials to suppress high stress levels
  • Maintains safe movement and effective stopping performance
  • Restores brakes to like-new performance
See More

Dorman – First Stop – Brake Spring Hold Down Pin (Part No.HW1109)

Brake Spring Hold Down Pin

from

$1.99
Our Brake Spring Hold Down Pin is constructed from high-quality materials for a prolonged service life. Replacement restores the brake system to proper operation, helping to ensure road safety.

Product Features:
  • Corrosion-resistant for long-lasting durability against harsh road and weather conditions
  • Heat-resistant to withstand high temperatures generated by the brake system
  • Direct replacement for a proper fit
  • Manufactured to strict engineering quality standards
See More

Dorman – First Stop – Brake Spring Hold Down Pin (Part No.HW1107)

Brake Spring Hold Down Pin

from

$2.99
Our Brake Spring Hold Down Pin is constructed from high-quality materials for a prolonged service life. Replacement restores the brake system to proper operation, helping to ensure road safety.

Product Features:
  • Corrosion-resistant for long-lasting durability against harsh road and weather conditions
  • Heat-resistant to withstand high temperatures generated by the brake system
  • Direct replacement for a proper fit
  • Manufactured to strict engineering quality standards
See More

Carquest Wearever – Brake Spring Hold-Down Pin (Part No.1109-2)

Brake Spring Hold-Down Pin

from

$5.99
Brakes are designed as a system and all the parts need to work together for best performance. Industry brake service experts agree – when brake friction materials are ready to be replaced, the hardware is too. A complete brake job that includes new hardware goes a long way toward preventing comebacks.

Product Features:
  • This part matches Original Equipment (OE) quality specifications
  • Manufactured with quality materials to suppress high stress levels
  • Maintains safe movement and effective stopping performance
  • Restores brakes to like-new performance
See More

1969 Chevrolet Impala Brake Parts

You count on your 1969 Chevrolet Impala to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Brake Parts. With 45 Brake Parts ranging in price from $1.99 to $87.99, you’re sure to find everything you need for your 1969 Chevrolet Impala.

Brands matter. If you want to shop a specific Brake Parts brand, we stock 10 different brands like Carquest, Carquest Premium, and Cardone. 1969 Chevrolet Impala Brake Parts start as low as $1.99!

One of the best ways to find top quality OEM or aftermarket Brake Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 1,373 extensive product reviews on 1969 Chevrolet Impala Brake Parts. Some of the top-rated Brake Parts products we carry are Drum Brake Wheel Cylinder with 5.0 stars and Drum Brake Adjusting Screw Assembly with Tip with 5.0 stars.

Did we mention you can order your Brake Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Brake Parts inventory for your 1969 Chevrolet Impala below to get started!

Top-Rated Brake Parts Brands For Your 1969 Chevrolet Impala

Trusted Brake Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1969 Chevrolet Impala running right for years to come. In our inventory you’ll find brands like Carquest, Carquest Premium, Cardone, and even more.

Popular Carquest Professional Platinum Brake Parts

You’ll find popular Carquest Professional Platinum brand products across Brake Pads and Shoes. All are waiting to get your 1969 Chevrolet Impala back on the road. Some of the top-rated Carquest Professional Platinum products in these categories are:

FAQs for 1969 Chevrolet Impala Brake Parts

What are the most purchased Brake Parts for the 1969 Chevrolet Impala?

Out of 45 Brake Parts for the 1969 Chevrolet Impala, the most popular in our inventory are:
Brake Pads With Hardware, Ceramic, Long Pad Life, Quiet Braking
from $62.99
(17)
Brake Pads With Hardware, Ceramic, Long Pad Life, Quiet Braking
Rear Brake Pads and Shoes
Brake Master Cylinder Bleeding Tool
from $15.99
(10)
Brake Master Cylinder Bleeding Tool
Brake Master Cylinder Bleeders

What are the top-rated 1969 Chevrolet Impala Brake Parts?

Top-rated Brake Parts for your 1969 Chevrolet Impala based on customer reviews/ratings are:
Drum Brake Wheel Cylinder
from $15.99
(9)
Drum Brake Wheel Cylinder
“Great product”
Drum Brake Adjusting Screw Assembly with Tip
from $8.29
(5)
Drum Brake Adjusting Screw Assembly with Tip
“Great piece”
Brake Hold-Down Spring Cup
from $3.79
(5)
Brake Hold-Down Spring Cup
“worked great”