1969 Chevrolet C50 Brake Parts

Below you will find various in-demand Chevrolet Brake Parts, components and accessories for your 1969 C50. Advance Auto Parts has popular C50 parts like Brake Boosters, Wheel Cylinders, Brake Hoses and more. You’ll also find aftermarket and OEM Brake Parts for other C50 model years including 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990 and more. Select a category of 1969 Chevrolet C50 Brake Parts below and start saving instantly.

Popular 1969 Chevrolet C50 Brake Parts Categories

Brake Wheel Cylinders

Power Brake Boosters

Brake Master Cylinders

Brake Hoses

Essential Brake Parts for 1969 Chevrolet C50s

from

$285.99

CARDONE Remanufactured Power Brake Boosters are re-engineered, built and tested to match O.E. performance. Original designs are scrutinized for potential improvement and, where applicable, design upgrades are implemented to produce a more durable part than the original. All units are 100% tested to ensure perfect fit and function.

Product Features:

100% O.E. quality seals, diaphragms and check valves are installed on every unit for like-new performance and reliability.
Exclusive rust-prohibitive finishing process extends unit life.
Master cylinder output rods are pre-adjusted (when included) for easier and faster installation.
All units are 100% tested to ensure reliable performance.
Guaranteed fit and function.

from

$296.99

100% O.E. quality seals, diaphragms and check valves are installed on every unit for like-new performance and reliability.
Exclusive rust-prohibitive finishing process extends unit life.
Master cylinder output rods are pre-adjusted (when included) for easier and faster installation.
All units are 100% tested to ensure reliable performance.
Guaranteed fit and function.

from

$331.99

CARDONE New Vacuum Brake Boosters, Hydro-Vac Boosters, and Hydraulic Boosters are back by CARDONE Select Engineering (CSE). CARDONE Engineering (CSE) is based off 40 years of CARDONE engineering expertise, where original design weaknesses are identified, corrected and where applicable upgraded to provide a more durable part then the original unit. Every unit is 100% new and manufactured to meet or exceed OEM performance, providing a quality product both you and your vehicle rely on.

Product Features:

A premium finish is applied on every unit for superior corrosion protection.
Each unit is 100% vacuum and pressure tested to ensure reliable performance.
Pedal rods are 100% functionally tested to ensure proper operation.
Guaranteed fit and function.
Meets or exceeds O.E.M. performance.
Meets or exceeds O.E.M. performance.

from

$196.99

100% O.E. quality seals, diaphragms and check valves are installed on every unit for like-new performance and reliability.
Exclusive rust-prohibitive finishing process extends unit life.
Master cylinder output rods are pre-adjusted (when included) for easier and faster installation.
All units are 100% tested to ensure reliable performance.
Guaranteed fit and function.

from

$368.99

100% O.E. quality seals, diaphragms and check valves are installed on every unit for like-new performance and reliability.
Exclusive rust-prohibitive finishing process extends unit life.
Master cylinder output rods are pre-adjusted (when included) for easier and faster installation.
All units are 100% tested to ensure reliable performance.
Guaranteed fit and function.

from

$202.99

100% O.E. quality seals, diaphragms and check valves are installed on every unit for like-new performance and reliability.
Exclusive rust-prohibitive finishing process extends unit life.
Master cylinder output rods are pre-adjusted (when included) for easier and faster installation.
All units are 100% tested to ensure reliable performance.
Guaranteed fit and function.

from

$40.99

This direct replacement drum brake wheel cylinder was specifically engineered to match the fit, function and performance of the original wheel cylinder on particular vehicles. It is manufactured and tested for quality assurance.

Product Features:

Ideal replacement – specifically engineered to be direct match for original drum brake wheel cylinder on particular vehicles
Cost-effective fix – replacement of cylinder while servicing drum brakes is fastest, surest way to ensure brake performance
Quality materials – made with high-quality EPDM rubber cups and boots for long-lasting performance
Professionally tested – wheel cylinder bores are surface-tested to ensure an optimum sealing surface for the pressure cups

from

$37.49

Ideal replacement – specifically engineered to be direct match for original drum brake wheel cylinder on particular vehicles
Cost-effective fix – replacement of cylinder while servicing drum brakes is fastest, surest way to ensure brake performance
Quality materials – made with high-quality EPDM rubber cups and boots for long-lasting performance
Professionally tested – wheel cylinder bores are surface-tested to ensure an optimum sealing surface for the pressure cups

from

$49.99

Assemblies match what was originally installed on the car from OE for quality, fit, function and material.

Product Features:

Wheel cylinders match what was originally installed on the vehicle.
Each cylinder matches OE for form, fit and function and material
Wheel cylinders provide leak-free performance by providing the highest quality resistance to heat, corrosion and leakage
All bleeder screws are coated providing extra protection
Rubber components are manufactured in house using the latest formula EPDM material.
Wheel cylinders use correct EPDM rubber for DOT3, 4 and 5 brake fluids
All casting machining is done by computer programed CNC machines.
Castings go through 2 inspection processes (via micrometer and via go-no go fixture check) before being sent to the assembly department insuring all machining is correct and matches the OE.

from

$55.99

Ideal replacement – specifically engineered to be direct match for original drum brake wheel cylinder on particular vehicles
Cost-effective fix – replacement of cylinder while servicing drum brakes is fastest, surest way to ensure brake performance
Quality materials – made with high-quality EPDM rubber cups and boots for long-lasting performance
Professionally tested – wheel cylinder bores are surface-tested to ensure an optimum sealing surface for the pressure cups

from

$36.99

This automotive brake hydraulic hose was precision-engineered to match the fit, function and performance of the original brake hose on specific vehicles and positions to ensure safe, long-lasting durability as part of a complete brake repair.

Product Features:

Ideal replacement – precision-engineered to match the performance of the original brake hose on specific vehicles
Position-specific – manufactured to precise measurements to provide an exact fit and easy installation
Quality assured – materials tested to exacting government-regulated safety and durability standards
Durable design – made with EPDM rubber and specially coated, corrosion-resistant fittings
Brand may vary by location

from

$30.99

Ideal replacement – precision-engineered to match the performance of the original brake hose on specific vehicles
Position-specific – manufactured to precise measurements to provide an exact fit and easy installation
Quality assured – materials tested to exacting government-regulated safety and durability standards
Durable design – made with EPDM rubber and specially coated, corrosion-resistant fittings

from

$58.99

Ideal replacement – precision-engineered to match the performance of the original brake hose on specific vehicles
Position-specific – manufactured to precise measurements to provide an exact fit and easy installation
Quality assured – materials tested to exacting government-regulated safety and durability standards
Durable design – made with EPDM rubber and specially coated, corrosion-resistant fittings

from

$22.99

Ideal replacement – precision-engineered to match the performance of the original brake hose on specific vehicles
Position-specific – manufactured to precise measurements to provide an exact fit and easy installation
Quality assured – materials tested to exacting government-regulated safety and durability standards
Durable design – made with EPDM rubber and specially coated, corrosion-resistant fittings

from

$31.99

Ideal replacement – precision-engineered to match the performance of the original brake hose on specific vehicles
Position-specific – manufactured to precise measurements to provide an exact fit and easy installation
Quality assured – materials tested to exacting government-regulated safety and durability standards
Durable design – made with EPDM rubber and specially coated, corrosion-resistant fittings
Brand may vary by location

from

$19.79

Ideal replacement – precision-engineered to match the performance of the original brake hose on specific vehicles
Position-specific – manufactured to precise measurements to provide an exact fit and easy installation
Quality assured – materials tested to exacting government-regulated safety and durability standards
Durable design – made with EPDM rubber and specially coated, corrosion-resistant fittings

from

$432.99

This brake master cylinder is precision-engineered to match the design, function, and performance of the original master cylinder on specific vehicle years, makes and models. It is made of new, high-quality materials for a safe, durable replacement.

Product Features:

Precise replacement – cylinder housing is constructed to match the casting material of the original part and ensure similar performance
Durable design – all rubber components are made of high-quality EPDM compound for resistance to glycol-based brake fluid
100% new – made entirely of new materials, not remanufactured, to ensure highest quality and safety
Strict specifications – made to meet rigorous SAE International standards

from

$95.99

Precise replacement – cylinder housing is constructed to match the casting material of the original part and ensure similar performance
Durable design – all rubber components are made of high-quality EPDM compound for resistance to glycol-based brake fluid
100% new – made entirely of new materials, not remanufactured, to ensure highest quality and safety
Strict specifications – made to meet rigorous SAE International standards

from

$77.99

Using advanced re-engineering materials and processes, our master cylinders match O.E. performance and fitment. New O.E.-quality seals and cups are installed on each unit, ensuring leak-free, long-lasting performance. Cast-iron master cylinders.

Product Features:

Only new O.E.-quality seals and cups are used in the remanufacturing process to ensure O.E. performance and reliability. All rubber components meet S.A.E. specifications.
Bleeding kits are supplied with the unit to make the bleeding process faster and easier (where applicable).
Bores meet critical micro-finish specifications to eliminate pitting and corrosion, a cause of premature failure.
Cast-iron master cylinders feature a premium protective coating to minimize rust and extend unit life.
Piston assemblies are height-gauged to ensure the master cylinder equals the O.E. unit performance.
Plastic reservoirs are vacuum-tested to ensure they are leak free.

Upgrade your 1969 Chevrolet C50 with Top-Quality Brake Parts

When it comes to maintaining or upgrading your 1969 Chevrolet C50, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Chevrolet or enhancing its overall performance, Brake Parts are key to keeping your C50 functioning at its best. At Advance Auto Parts, we offer a wide selection of 6 Brake Parts for the 1969 Chevrolet C50, designed to meet your needs without breaking the bank. From Brake Booster replacements to Wheel Cylinders upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Brake Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Brake Parts for your 1969 Chevrolet C50 at great prices. Our Brake Parts inventory for this model ranges from just $22.99 to $368.99, with an average price of $100.32. Our 6 Brake Parts in stock come from 2 trusted brands, so you’re sure to find the right part for your 1969 Chevrolet C50 without overspending.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Brake Part upgrades. Explore related part types like Fluids and Chemicals, Wipers and Related Products and more to make sure your 1969 Chevrolet C50 is always ready to roll. We’re committed to providing you with everything you need to keep your C50 in top shape, all in one place. Start shopping confidently below for your 1969 Chevrolet C50!

Best-Selling Brake Boosters for 1969 Chevrolet C50s

Enhance the driving experience in your Chevrolet with 1 quality Brake Booster components, starting at $368.99.

show more show less

from

$368.99

100% O.E. quality seals, diaphragms and check valves are installed on every unit for like-new performance and reliability.
Exclusive rust-prohibitive finishing process extends unit life.
Master cylinder output rods are pre-adjusted (when included) for easier and faster installation.
All units are 100% tested to ensure reliable performance.
Guaranteed fit and function.

Top Picks for 1969 Chevrolet C50 Brake Hoses

Upgrade Chevrolet C50s with top-quality Brake Hoses parts, including 3 OEM and aftermarket selections for your 1969 model.

show more show less

from

$22.99

Ideal replacement – precision-engineered to match the performance of the original brake hose on specific vehicles
Position-specific – manufactured to precise measurements to provide an exact fit and easy installation
Quality assured – materials tested to exacting government-regulated safety and durability standards
Durable design – made with EPDM rubber and specially coated, corrosion-resistant fittings

from

$31.99

Ideal replacement – precision-engineered to match the performance of the original brake hose on specific vehicles
Position-specific – manufactured to precise measurements to provide an exact fit and easy installation
Quality assured – materials tested to exacting government-regulated safety and durability standards
Durable design – made with EPDM rubber and specially coated, corrosion-resistant fittings
Brand may vary by location

from

$58.99

Ideal replacement – precision-engineered to match the performance of the original brake hose on specific vehicles
Position-specific – manufactured to precise measurements to provide an exact fit and easy installation
Quality assured – materials tested to exacting government-regulated safety and durability standards
Durable design – made with EPDM rubber and specially coated, corrosion-resistant fittings

In-Demand Brake Master Cylinders for 1969 Chevrolet C50s

Select from 1 premium Brake Master Cylinders parts for your 1969 Chevrolet C50.

show more show less

from

$77.99

Only new O.E.-quality seals and cups are used in the remanufacturing process to ensure O.E. performance and reliability. All rubber components meet S.A.E. specifications.
Bleeding kits are supplied with the unit to make the bleeding process faster and easier (where applicable).
Bores meet critical micro-finish specifications to eliminate pitting and corrosion, a cause of premature failure.
Cast-iron master cylinders feature a premium protective coating to minimize rust and extend unit life.
Piston assemblies are height-gauged to ensure the master cylinder equals the O.E. unit performance.
Plastic reservoirs are vacuum-tested to ensure they are leak free.

FAQs for 1969 Chevrolet C50 Brake Parts

Which Brake Parts are best-sellers for 1969 Chevrolet C50s?

Out of 6 Brake Parts that fit 1969 Chevrolet C50s, the following parts are the top sellers:

Remanufactured Brake Master Cylinder (3830926) – $77.99
Brake Hydraulic Hose (3653382) – $22.99
Drum Brake Wheel Cylinder (20640577) – $40.99

What’s the price range for 1969 Chevrolet C50 Brake Parts?

Brake Part prices for the 1969 Chevrolet C50 start at $22.99 and go up to $368.99 for the most premium parts.

What’s the average price of a Brake Part for a 1969 Chevrolet C50?

The average price for Brake Parts for the 1969 Chevrolet C50 is $100.32. Keep in mind the variety of part types within our Brake Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Brake Parts for other Chevrolet C50 model years?

Yes, we currently carry Brake Parts for 25 model years of Chevrolet C50s between 1963 and 1990. Brake Parts are bought most frequently for the following model years: 1990, 1989, 1988, 1987, 1986, 1985, 1984, 1983, and 1982.

What are the cheapest Brake Parts for my 1969 Chevrolet C50?

The cheapest 1969 Chevrolet C50 Brake Parts we carry in stock are:

Brake Hydraulic Hose (3653382) – $22.99
Brake Hose Assembly (18650034) – $31.99
Drum Brake Wheel Cylinder (20640577) – $40.99
Brake Hose Assembly (18650077) – $58.99
Remanufactured Brake Master Cylinder (3830926) – $77.99

What types of Brake Parts do you sell for my 1969 Chevrolet C50?

As of 2/5/25, these are some of the most in-demand types of Brake Parts for a 1969 Chevrolet C50:

Can I get help with 1969 Chevrolet C50 Brake Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Chevrolet Brake Parts and more.

What is your return policy for Chevrolet C50 Brake Parts?

Advance Auto Parts keeps returns simple. For new Chevrolet C50 Brake Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1969 Chevrolet C50 Brake Parts

Wearever – Hydro-Vac Brake Booster: Without Master Cylinder (Part No.51-8028)

Wearever – Hydro-Vac Brake Booster: Without Master Cylinder (Part No.51-8001)

Cardone New – Vacuum Brake Booster: Without Master Cylinder (Part No.5C-479900)

Wearever – Vacuum Brake Booster: Without Master Cylinder (Part No.54-79900)

Wearever – Vacuum Brake Booster: Without Master Cylinder (Part No.54-79400)

Wearever – Hydro-Vac Brake Booster: Without Master Cylinder (Part No.51-8018)

Carquest Wearever – Drum Brake Wheel Cylinder (Part No.WCA37182)

Carquest Wearever – WHEEL CYLINDER (Part No.WCA19090)

Carquest Wearever – Drum Brake Wheel Cylinder (Part No.WCA78745)

Carquest Wearever – WHEEL CYLINDER (Part No.WCA78744)

Carquest Wearever – Brake Hose Assembly (Part No.BHA38520)

Carquest Wearever – Brake Hose Assembly (Part No.BHA38289)

Carquest Wearever – Brake Hose Assembly (Part No.BHA36697)

Carquest Wearever – Brake Hydraulic Hose (Part No.BHA71305)

Carquest Wearever – Brake Hose Assembly (Part No.BHA36696)

Carquest Wearever – Brake Hose Assembly (Part No.BHA38908)

Carquest Wearever – New Brake Master Cylinder: With Reservoir, Exact Fit, 1.75" Bore (Part No.MCA12430)

Carquest Wearever – New Brake Master Cylinder: With Reservoir, Exact Fit, 1.5" Bore (Part No.MCA36229)

Wearever – Remanufactured Brake Master Cylinder (Part No.10-57579)

Wearever – Vacuum Brake Booster: Without Master Cylinder (Part No.54-79400)

Carquest Wearever – Drum Brake Wheel Cylinder (Part No.WCA37182)

Carquest Wearever – Brake Hydraulic Hose (Part No.BHA71305)

Carquest Wearever – Brake Hose Assembly (Part No.BHA36696)

Carquest Wearever – Brake Hose Assembly (Part No.BHA36697)

Wearever – Remanufactured Brake Master Cylinder (Part No.10-57579)