1968 Pontiac Executive Belts and Hoses
Find Your Specific 1968 Pontiac Executive Belts and Hoses
Below you will find various in-demand Pontiac Belts and Hoses, components and accessories for your 1968 Executive. Advance Auto Parts has popular Executive parts like Radiator Hoses, Duct Hoses, Transmission Cooler Hoses and more. You’ll also find aftermarket and OEM Belts and Hoses for other Executive model years including
1967,
1969,
1970 and more. Select a category of 1968 Pontiac Executive Belts and Hoses below and start saving instantly.
Popular 1968 Pontiac Executive Belts and Hoses Categories
Essential Belts and Hoses for 1968 Pontiac Executives
Gates – Safety Stripe Standard Straight Heater Hose (Sold by foot) (Part No.28411)
from
$3.79
Premium hose constructed for long service life.
Product Features:
See More
Product Features:
- Good resistance to high temperatures for long periods of time, which prolongs the service life
- Compliant with SAE 20R3 Standard Wall Class D-2 requirements
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Warning: Do not use for fuel or oil transfer applications
- PLEASE NOTE: Item is priced and sold by the foot. See store for details.
Imperial – Transmission Oil Cooler Hose (Part No.248001)
from
$32.49
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.
Product Features:
See More
Product Features:
- Transmission oil cooler hose
- 11/32″ x 4-1/2′
- Designed for transmission fluid applications
- Made for tight-radius applications found in transmission cooler installations
- Compatible with 11/32 in. OEM cooler systems
- Tube made of black chemigum (nitrile)
- Reinforced with 2-spiral synthetic
- Covered in black Hypalon
- Compatible with 11/32 in. OEM cooler systems
- Tube made of black chemigum (nitrile)
- Reinforced with 2-spiral synthetic
- Covered in black Hypalon
Imperial – Metal Line Kit for Engine Oil Cooler (Part No.240293)
from
$59.99
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.
Product Features:
See More
Product Features:
- Metal line kit
- For use in engine oil cooler applications
- Routes oil lines past exhaust manifolds
- Provides protection where standard hoses can fail
- Used on Chevrolet V8 applications
- Routes oil lines past exhaust manifolds
- Provides protection where standard hoses can fail
- Comes with all parts needed for the job
Imperial – Engine Oil Cooler Hose (Part No.240112)
from
$48.99
1/2″ x 12′ engine oil cooler hose. Imperial engine hose is specifically designed for engine cooling applications.
Product Features:
See More
Product Features:
- Engine oil cooler hose
- Size: 1/2″ x 12′
- Designed for engine oil applications
- 12′ hose length accommodates most applications
- Size: 1/2 in. x 12′
- Designed for engine oil applications
- 12′ hose length accommodates most applications
- Medium duty applications
Gates – Vulco-Flex II Flexible Coolant Hose (Part No.25487)
from
$35.49
Gates Vulco-Flex(R) II hose will bend in almost any direction. It easily replicates the angles and planes of a wide variety of expensive original equipment coolant hose, for quick, easy replacement.
Product Features:
See More
Product Features:
- Improved sealing surface for greater leak resistance
- High flexibility for easy installation
- Maximum vehicle coverage with a minimum inventory
- Resistant to heat, oil and ozone
- Rated for SAE 20R5 Class D-2 performance
- Temperature range: up to +257 degrees Celsius. F (+125 Deg. C)
- Note: Gates recommends replacing clamps and connectors every time a new cooling hose is installed.
- Caution: Do not use for fuel or oil transfer applications
Gates – Safety Stripe Standard Straight Heater Hose (Sold by foot) (Part No.28412)
from
$3.99
Premium hose constructed for long service life.
Product Features:
See More
Product Features:
- Good resistance to high temperatures over prolonged periods, which extends the service life.
- Compliant with SAE 20R3 Standard Wall Class D-2 requirements
- Temperature range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Warning: Do not use for fuel or oil transfer applications
- CAUTION: Do not use for fuel or oil transfer applications
- PLEASE NOTE: Item is priced and sold by the foot. See store for details.
Gates – Green Stripe Heavy-Duty Vulco-Flex Coolant Hose (Part No.26502)
from
$29.99
Heavy-duty flexible hose designed to replace straight or curved coolant hoses. The benefit is maximum coverage with minimum inventory. Hose inside diameter remains constant from end to end. No convolutions inside hose so tube is smooth, allowing free coolant flow. Approved for marine applications.
Product Features:
See More
Product Features:
- Designed to resist electrochemical degradation, which is the primary cause of hose failure
- The built-in spiral steel wire allows for medium-sized curves without creases or folds.
- EPDM tube and Neoprene cover for extended service life
- The polyester fabric reinforcement takes the form of vulcanization without unnecessary stress on the connections.
- Resistant to heat, oil and ozone
- Compliant with SAE 20R5 Type EC Class D-2 specifications
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Caution: Do not use for fuel or oil transfer applications
- Caution: Do not use for fuel or oil transfer applications.
Gates – Premium Molded Coolant Hose (Part No.20046)
from
$34.99
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
Product Features:
See More
Product Features:
- Materials specifically designed to resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and ensure a perfect seal
- EPDM tube; synthetic fiber knit reinforcement; heat-, ozone- and chemical coolant-resistant EPDM cover
- Compliant with the requirements of SAE 20R4, class D2 and DIN 73411, class A standards (except with regard to tolerances)
- temperature range Deg. F to +257 degrees F (-40 degrees C to +125 degrees C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
Dorman – Help – Carburetor Pre-Heater Hose – 2 In. x 18 In. – Aluminum (Part No.96024)
from
$8.49
This HVAC control duct hose is designed to match the fit and function of the original hose on specified vehicles, and is engineered for durability and reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this HVAC control duct hose is designed to match the fit and function of the original hose on specified vehicles
- Restores functionality – reliable replacement for an original hose that has failed due to heat or vibration
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Upgrade your 1968 Pontiac Executive with Top-Quality Belts and Hoses
When it comes to maintaining or upgrading your 1968 Pontiac Executive, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Pontiac or enhancing its overall performance, Belts and Hoses are key to keeping your Executive functioning at its best. At Advance Auto Parts, we offer a wide selection of 9 Belts and Hoses for the 1968 Pontiac Executive, designed to meet your needs without breaking the bank.
From
Radiator Hose
replacements to
Duct Hoses
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Belts and Hoses for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Belts and Hoses for your 1968 Pontiac Executive at great prices.
Our Belts and Hoses inventory for this model
ranges from just $3.79 to $59.99, with
an average price of $28.69.
Our 9 Belts and Hoses in stock come from 3 trusted brands, so you’re sure to find the right part for your 1968 Pontiac Executive without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1968 Pontiac Executive, we stock popular OEM and aftermarket Belts and Hoses from top names
like Dorman Imperial, and more.
Dorman Belts and Hoses
start at just $8.49 and boast an impressive 4.2 stars average rating from customers.
With 784 customer reviews and counting, our 1968 Pontiac Executive Belts and Hoses have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Belts and Hose upgrades. Explore related part types like Batteries and Chargers, Fluids and Chemicals
and more to make sure your 1968 Pontiac Executive is always ready to roll. We’re committed to providing you with everything you need to keep your Executive in top shape, all in one place.
Start shopping confidently below for your 1968 Pontiac Executive!
Best-Selling Radiator Hoses for 1968 Pontiac Executives
Enhance the driving experience in your Pontiac with 5 quality Radiator Hose components, starting at $3.79.
Gates – Premium Molded Coolant Hose (Part No.20046)
from
$34.99
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
Product Features:
See More
Product Features:
- Materials specifically designed to resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and ensure a perfect seal
- EPDM tube; synthetic fiber knit reinforcement; heat-, ozone- and chemical coolant-resistant EPDM cover
- Compliant with the requirements of SAE 20R4, class D2 and DIN 73411, class A standards (except with regard to tolerances)
- temperature range Deg. F to +257 degrees F (-40 degrees C to +125 degrees C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
Gates – Vulco-Flex II Flexible Coolant Hose (Part No.25487)
from
$35.49
Gates Vulco-Flex(R) II hose will bend in almost any direction. It easily replicates the angles and planes of a wide variety of expensive original equipment coolant hose, for quick, easy replacement.
Product Features:
See More
Product Features:
- Improved sealing surface for greater leak resistance
- High flexibility for easy installation
- Maximum vehicle coverage with a minimum inventory
- Resistant to heat, oil and ozone
- Rated for SAE 20R5 Class D-2 performance
- Temperature range: up to +257 degrees Celsius. F (+125 Deg. C)
- Note: Gates recommends replacing clamps and connectors every time a new cooling hose is installed.
- Caution: Do not use for fuel or oil transfer applications
Gates – Green Stripe Heavy-Duty Vulco-Flex Coolant Hose (Part No.26502)
from
$29.99
Heavy-duty flexible hose designed to replace straight or curved coolant hoses. The benefit is maximum coverage with minimum inventory. Hose inside diameter remains constant from end to end. No convolutions inside hose so tube is smooth, allowing free coolant flow. Approved for marine applications.
Product Features:
See More
Product Features:
- Designed to resist electrochemical degradation, which is the primary cause of hose failure
- The built-in spiral steel wire allows for medium-sized curves without creases or folds.
- EPDM tube and Neoprene cover for extended service life
- The polyester fabric reinforcement takes the form of vulcanization without unnecessary stress on the connections.
- Resistant to heat, oil and ozone
- Compliant with SAE 20R5 Type EC Class D-2 specifications
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Caution: Do not use for fuel or oil transfer applications
- Caution: Do not use for fuel or oil transfer applications.
Gates – Safety Stripe Standard Straight Heater Hose (Sold by foot) (Part No.28412)
from
$3.99
Premium hose constructed for long service life.
Product Features:
See More
Product Features:
- Good resistance to high temperatures over prolonged periods, which extends the service life.
- Compliant with SAE 20R3 Standard Wall Class D-2 requirements
- Temperature range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Warning: Do not use for fuel or oil transfer applications
- CAUTION: Do not use for fuel or oil transfer applications
- PLEASE NOTE: Item is priced and sold by the foot. See store for details.
Gates – Safety Stripe Standard Straight Heater Hose (Sold by foot) (Part No.28411)
from
$3.79
Premium hose constructed for long service life.
Product Features:
See More
Product Features:
- Good resistance to high temperatures for long periods of time, which prolongs the service life
- Compliant with SAE 20R3 Standard Wall Class D-2 requirements
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Warning: Do not use for fuel or oil transfer applications
- PLEASE NOTE: Item is priced and sold by the foot. See store for details.
Most Popular 1968 Pontiac Executive Duct Hoses
Customize your Pontiac with 1 Duct Hoses products
like Air Duct Hoses, all
priced under $8.49.
Dorman – Help – Carburetor Pre-Heater Hose – 2 In. x 18 In. – Aluminum (Part No.96024)
from
$8.49
This HVAC control duct hose is designed to match the fit and function of the original hose on specified vehicles, and is engineered for durability and reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this HVAC control duct hose is designed to match the fit and function of the original hose on specified vehicles
- Restores functionality – reliable replacement for an original hose that has failed due to heat or vibration
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Top Picks for 1968 Pontiac Executive Transmission Cooler Hoses
Upgrade Pontiac Executives with top-quality Transmission Cooler Hoses parts, including 1 OEM and aftermarket selections for your 1968 model.
Imperial – Transmission Oil Cooler Hose (Part No.248001)
from
$32.49
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.
Product Features:
See More
Product Features:
- Transmission oil cooler hose
- 11/32″ x 4-1/2′
- Designed for transmission fluid applications
- Made for tight-radius applications found in transmission cooler installations
- Compatible with 11/32 in. OEM cooler systems
- Tube made of black chemigum (nitrile)
- Reinforced with 2-spiral synthetic
- Covered in black Hypalon
- Compatible with 11/32 in. OEM cooler systems
- Tube made of black chemigum (nitrile)
- Reinforced with 2-spiral synthetic
- Covered in black Hypalon
In-Demand Oil Cooler Hoses for 1968 Pontiac Executives
Select from 2 premium Oil Cooler Hoses parts for your 1968 Pontiac Executive, with prices ranging from $48.99 to $59.99.
Imperial – Engine Oil Cooler Hose (Part No.240112)
from
$48.99
1/2″ x 12′ engine oil cooler hose. Imperial engine hose is specifically designed for engine cooling applications.
Product Features:
See More
Product Features:
- Engine oil cooler hose
- Size: 1/2″ x 12′
- Designed for engine oil applications
- 12′ hose length accommodates most applications
- Size: 1/2 in. x 12′
- Designed for engine oil applications
- 12′ hose length accommodates most applications
- Medium duty applications
Imperial – Metal Line Kit for Engine Oil Cooler (Part No.240293)
from
$59.99
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.
Product Features:
See More
Product Features:
- Metal line kit
- For use in engine oil cooler applications
- Routes oil lines past exhaust manifolds
- Provides protection where standard hoses can fail
- Used on Chevrolet V8 applications
- Routes oil lines past exhaust manifolds
- Provides protection where standard hoses can fail
- Comes with all parts needed for the job
Top-Rated Belts and Hoses Brands For Your 1968 Pontiac Executive
Shop for the best-rated brands offering Belts and Hoses and other products for your 1968 Pontiac Executives. Below you’ll find some of our best rated Belts and Hoses from Dorman and Imperial, and more. Belts and Hoses from these brands that fit a 1968 Executive start at just $8.49 and are rated as high as 4.2 stars. OEM and aftermarket Belts and Hoses don’t get more top quality, durable, and affordable than from the brands below.
Popular Dorman 1968 Pontiac Executive Belts and Hoses
When it comes to maintaining or upgrading your 1968 Pontiac Executive, using quality Belts and Hoses is essential to ensure durability and a perfect fit. Dorman ticks all of those boxes. We offer a wide selection of Dorman Belts and Hoses, specifically designed for the 1968 Pontiac Executive. With over 1 Dorman brand Belts and Hoses in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $8.49. Plus, with over 4 customer reviews and an average rating of 4.2 stars, you can trust that our Dorman Belts and Hoses will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$8.49
(4)
Carburetor Pre-Heater Hose – 2 In. x 18 In. – Aluminum
“Despite the search function this is a perfect fit for my 1974 Beetle. Best quality I ever had with one of these. Light years ahead of the paper or al”
Popular Imperial 1968 Pontiac Executive Belts and Hoses
Imperial auto parts is one of the highest quality Belts and Hose brands in the market. Any 1968 Pontiac Executive owner should feel confident when installing genuine Imperial parts in their vehicle. To ensure the best fit and performance for your 1968 Executive, Advance Auto Parts carries a full inventory of 1 Imperial Belts and Hoses. Plus you will be keeping your Pontiac in peak condition while saving money because prices on these Imperial Belts and Hoses range up to $32.49, plus, with more than 94 customer reviews and an impressive 4.1 stars average rating, you can be confident the Fram Belts and Hoses below will deliver on both quality and value.
from
$32.49
(94)
Transmission Oil Cooler Hose
“Great product make sure to get plate mount style other one is pain to mount”
FAQs for 1968 Pontiac Executive Belts and Hoses
Which Belts and Hoses are best-sellers for 1968 Pontiac Executives?
Out of 9 Belts and Hoses that fit 1968 Pontiac Executives, the following parts are the top sellers:
- Engine Oil Cooler Hose (19230057) – $48.99
- Metal Line Kit for Engine Oil Cooler (19230068) – $59.99
- Premium Molded Coolant Hose (10511150) – $34.99
What’s the price range for 1968 Pontiac Executive Belts and Hoses?
Belts and Hose prices for the 1968 Pontiac Executive start at $3.79 and go up to $59.99 for the most premium parts.
What’s the average price of a Belts and Hose for a 1968 Pontiac Executive?
The average price for Belts and Hoses for the 1968 Pontiac Executive is $28.69. Keep in mind the variety of part types within our Belts and Hose category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Belts and Hoses for other Pontiac Executive model years?
What are the cheapest Belts and Hoses for my 1968 Pontiac Executive?
The cheapest 1968 Pontiac Executive Belts and Hoses we carry in stock are:
- Safety Stripe Standard Straight Heater Hose (Sold by foot) (10505038) – $3.79
- Safety Stripe Standard Straight Heater Hose (Sold by foot) (10505007) – $3.99
- Carburetor Pre-Heater Hose – 2 In. x 18 In. – Aluminum (5192390) – $8.49
- Green Stripe Heavy-Duty Vulco-Flex Coolant Hose (10505068) – $29.99
- Transmission Oil Cooler Hose (5670022) – $32.49
What are the top-rated Belts and Hoses that fit the 1968 Pontiac Executive?
Out of 784 reviews by customers, our 1968 Pontiac Executive Belts and Hoses have an average customer rating of . These are some of the highest-rated Belts and Hose types for the 1968 Pontiac Executive and their top-rated products:
- Transmission Cooler Hoses
- Transmission Oil Cooler Hose (5670022) – $32.49
- Duct Hoses
- Transmission Oil Cooler Hose (5670022) – $32.49
What types of Belts and Hoses do you sell for my 1968 Pontiac Executive?
As of 3/1/26, these are some of the most in-demand types of Belts and Hoses for a 1968 Pontiac Executive:
Can I get help with 1968 Pontiac Executive Belts and Hose orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Pontiac Belts and Hoses and more.
What is your return policy for Pontiac Executive Belts and Hoses?
Advance Auto Parts keeps returns simple. For new Pontiac Executive Belts and Hoses and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
