1968 Mercury Comet Air Intakes
Find Your Specific 1968 Mercury Comet Air Intakes
Below you will find various in-demand Mercury Air Intakes, components and accessories for your 1968 Comet. Advance Auto Parts has popular Comet parts like Throttle Bodies & Carb Parts, Carburetor Kits, Air Cleaner Parts and more. You’ll also find aftermarket and OEM Air Intakes for other Comet model years including
1967,
1969,
1971,
1972,
1973,
1974,
1975,
1976,
1977 and more. Select a category of 1968 Mercury Comet Air Intakes below and start saving instantly.
Popular 1968 Mercury Comet Air Intakes Categories
Essential Air Intakes for 1968 Mercury Comets
Edelbrock – Edelbrock AVS2 1902 Carburetor: 500 CFM, 4 Barrel, Square Bore, Manual Choke Inlet (Part No.1902)
from
$458.99
The Edelbrock #1902 AV2 Series 500 cfm Carburetor is designed and calibrated for small cubic-inch single carb applications, match with an Edelbrock Performer or Performer EPS manifold or other brands of similar design. Includes both timed and full vacuum ports for ignition advance. #1902 is calibrated for single-quad applications and factory equipped with: Metering Jets – Primary .095, Secondary .095, Primary Rod .070 x .052, orange spring (5′ Hg). Use carb Studs #8008 or #8024 if needed. Match with an Edelbrock intake manifold for the ultimate induction upgrade.
See More
Edelbrock – Edelbrock Performer RPM Small Block Ford 351W Polished Intake Manifold, 71811 (Part No.71811)
from
$719.99
Edelbrock Performer RPM Small Block Ford 351W Polished Intake Manifold, 71811.
See More
Edelbrock – Edelbrock Throttle Lever For Ford 1968 And Later, Gold Iridited Finish, 1483 (Part No.1483)
from
$40.99
The Edelbrock Throttle Lever Adapter No: 1483 fits 1968 and later Ford automatic transmission equipped vehicles with cable operated throttle (except A.O.D.). Accepts cruise control. Use with appropriate throttle cable plate when necessary. Has a gold iridized finish to match Edelbrock AVS2, Performer Series Carbs.
See More
Edelbrock – Edelbrock Performer Series Carburetor Calibration Kit, Helps get the best performance, 1487 (Part No.1487)
Edelbrock – Edelbrock Fuel Bowl Inverted Flare Fuel Inlet Fitting #12415 (Part No.12415)
Edelbrock – Edelbrock Non-Adjustable Carburetor Needle and Seat #12605 Size .110 With Viton Tip (Part No.12605)
from
$22.99
Edelbrock Non-Adjustable Carburetor Needle and Seat #12605 Size .110 With Viton Tip.
See More
Edelbrock – "Edelbrock Pro-Flo Black 14"" Round Air Cleaner with 3"" Paper Element (Deep Flange), 1223" (Part No.1223)
from
$50.99
“Edelbrock triple chrome-plated round air cleaner No: 1223 works with all popular 5-1/8″” diameter carburetors (Performer Series, Thunder Series AVS, Holley, Thermo-Quad, Quadra jet and Carter AFB). The 10″” and 14″” models have knock-outs in the air cleaner base for use with Edelbrock crank case ventilation adapter No: 1205 (sold separately). No: 1208, No: 1209 and No: 1221 fit all Edelbrock carburetors. Heights of air cleaners are in parentheses, measured from the gasket flange to the top of the supplied retaining nut. Dimensions are accurate within 1/8″”.”
See More
Edelbrock – Edelbrock Standard Flow Carburetor Power Valve No. 12685 Single Stage 8.5in Hg (Part No.12685)
from
$17.99
The Edelbrock No. 12685 Single Stage 8.5 Hg Power Valve operates by using engine vacuum to control the opening and closing rate. During heavy load or under full power situations, they open to supply additional fuel to the main system to eliminate hesitation and bogging, ensuring the smooth delivery of power without any drivability concerns.
See More
Felpro – Felpro Engine Intake Manifold Gasket Set, MS 90361 (Part No.MS 90361)
from
$28.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
See More
Edelbrock – Edelbrock Carburetor Secondary Throttle Diaphragm, 12404 (Part No.12404)
from
$18.99
The Edelbrock No: 12404 Vacuum Secondary Diaphragm is a replacement service part for popular high performance Quick Fuel, Holley and Demon carburetors.
See More
Felpro – Felpro Carburetor Mounting Gasket, 60131 (Part No.60131)
from
$2.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
See More
Edelbrock – Edelbrock Carburetor Throttle Cable Bracket #1490 For Ford Small-Block 289-302 Windsor (Part No.1490)
from
$31.99
Edelbrock Carburetor Throttle Cable Bracket #1490 For Ford Small-Block 289-302 Windsor.
See More
Dorman – Dorman Steel Cup Expansion Plug 1-53/64 In., Height 0.380 (Sold by each), 555-083 (Part No.555-083)
from
$3.99
This engine expansion plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
See More
Edelbrock – Edelbrock Carburetor Accelerator Pump Diaphragm 30cc Gasoline, 12400 (Part No.12400)
from
$13.99
The Edelbrock Accelerator Pump Diaphragm 30cc Gasoline No: 12400 for 4150 Carburetors Proper installation is the responsibility of the installer. Improper installation will void your warranty and may result in poor performance and engine or vehicle damage
See More
United Carb – United Carb Carburetor-Remanufactured, 7-7330 (Part No.7-7330)
from
$294.99
Made in the USA, this remanufactured carburetor is completely disassembled and all internal parts, such as gaskets, gas filters, needle/seats and accelerator plunger cups, are discarded. All metal castings are thoroughly cleaned and restored to OEM (original equipment manufacturer) finish. Then the carburetor is reassembled to OEM-quality standards using all new component parts. Each carburetor is flow tested to simulate actual engine conditions, and all internal and external adjustments are set to OEM specifications.
See More
Holley – Holley Street/Strip Carbs, 0-4779C (Part No.0-4779C)
from
$870.99
The Ultra Double Pumper Carburetors feature all aluminum construction and are equipped with metering blocks and a base plate made from 6061-T6 billet aluminum. Three different anodized color options (Red, Blue, or Black) allow for a personalized look while maintaining the ultra high strength and durability you get from billet. They weigh in at approximately 5 lbs less than a comparable zinc carburetor. The new Ultra Double Pumper Carburetors have an enhanced fuel curve for optimum performance, with many more features such as aluminum construction; anodized billet aluminum metering blocks and base plate; 4 corner idle for precise idle control; mechanical secondaries for great performance; clear fuel level sight plugs for easy, no mess fuel level adjustments; Ford automatic transmission kickdown for use on popular Ford transmissions; four vacuum ports for all necessary vacuum accessories; and for the first time on a Double Pumper, factory pre-set electric choke for easy, fast cold start-ups. The clean, polished look coupled with Red, Blue, or Black metering blocks and throttle body will certainly set your ride apart whether you are at the show or track. Dont trust your performance to just anyone, Holley is the only Modular carburetor company that has been in business for over 100 years and has powered every NASCAR champion since the 60s.
See More
Edelbrock – Edelbrock Carburetor Accelerator Pump, 12403 (Part No.12403)
from
$43.99
“The Edelbrock No: 12403 Accelerator Pump Cam Kit Assortment Package of 8. These accelerator pump cams will have different shapes and profiles, allowing you to fine tune the accelerator pump’s performance to the engine’s requirements. Cam “”lift”” will directly affects the accelerator pump stroke and pump capacity. While the cam ramp profile and/or shape will control the “”timing”” of the shot. Each kit comes with 8 different accelerator pump cams and will fit Holley 2300, 4150 and 4160 carburetors.”
See More
Felpro – Felpro Air Cleaner Mounting Gasket, 60038 (Part No.60038)
from
$4.49
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
See More
Victor Reinz – Victor Reinz Air Cleaner Mounting Gasket, 71-13854-00 (Part No.71-13854-00)
from
$3.49
With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.
See More
Edelbrock – Edelbrock Fuel Bowl Gaskets for Holley Carburetors, Direct replacement for proper fit, 12382 (Part No.12382)
from
$16.99
The Edelbrock No. 12382 fuel bowl gasket is designed for Holley 2300, 4150, 4160, 4175 and 4500 carburetors. Kit includes two black nitrile fuel bowl gaskets.
See More
Edelbrock – Edelbrock Transfer Tube O-Rings No. 12416 For Holley No. 4150, No. 4160, No. 4165, And No. 4175 Carbs (Part No.12416)
from
$12.99
Edelbrock Transfer Tube O-Rings Pair No. 12416 Will Fit Holley 4150, 4160, 4165 &4175 Series Carb
See More
Edelbrock – Edelbrock Standard Main Jet Carburetor Metering Jet Size .073 (Pair), 12470 (Part No.12470)
from
$14.99
“The Edelbrock 94 No. 12470 Carburetor Jets .070″”Intended for tuning the Edelbrock 94 carburetor, but will also fit original Holly 94’s and its later variations. Jets sold in pairs.”
See More
Edelbrock – Edelbrock Standard Main Jet Carburetor Metering Jet Size .080 (Pair), 12480 (Part No.12480)
from
$14.99
“The Edelbrock 94 No. 12480 Carburetor Jets .080″”Intended for tuning the Edelbrock 94 carburetor, but will also fit original Holly 94’s and its later variations. Jets sold in pairs.”
See More
Edelbrock – Edelbrock Standard Main Jet Carburetor Metering Jet Size .070 (Pair), 12469 (Part No.12469)
from
$14.99
“The Edelbrock 94 No. 12469 Carburetor Jets .069″”Intended for tuning the Edelbrock 94 carburetor, but will also fit original Holly 94’s and its later variations. Jets sold in pairs.”
See More
Wells Vehicle Electronics – Wells Vehicle Electronics Carburetor Repair Kit, 2G1762 (Part No.2G1762)
from
$24.99
WVE is a leading source of advanced vehicle electronics components for replacement applications in the automotive aftermarket and original equipment applications. WVE offers high-technology manufacturing along with innovative solutions and improvements to OE designs. Every component either matches or improves on the OE design to ensure fast, easy installation, superior performance and reliability.
See More
Wells Vehicle Electronics – Wells Vehicle Electronics Carburetor Repair Kit, 2G2095 (Part No.2G2095)
from
$20.99
WVE is a leading source of advanced vehicle electronics components for replacement applications in the automotive aftermarket and original equipment applications. WVE offers high-technology manufacturing along with innovative solutions and improvements to OE designs. Every component either matches or improves on the OE design to ensure fast, easy installation, superior performance and reliability.
See More
Wells Vehicle Electronics – Wells Vehicle Electronics Carburetor Repair Kit, 2G1793 (Part No.2G1793)
from
$46.99
WVE is a leading source of advanced vehicle electronics components for replacement applications in the automotive aftermarket and original equipment applications. WVE offers high-technology manufacturing along with innovative solutions and improvements to OE designs. Every component either matches or improves on the OE design to ensure fast, easy installation, superior performance and reliability.
See More
Wells Vehicle Electronics – Wells Vehicle Electronics Carburetor Repair Kit, 2G1784 (Part No.2G1784)
from
$22.99
WVE is a leading source of advanced vehicle electronics components for replacement applications in the automotive aftermarket and original equipment applications. WVE offers high-technology manufacturing along with innovative solutions and improvements to OE designs. Every component either matches or improves on the OE design to ensure fast, easy installation, superior performance and reliability.
See More
Upgrade your 1968 Mercury Comet with Top-Quality Air Intakes
When it comes to maintaining or upgrading your 1968 Mercury Comet, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Mercury or enhancing its overall performance, Air Intakes are key to keeping your Comet functioning at its best. At Advance Auto Parts, we offer a wide selection of 131 Air Intakes for the 1968 Mercury Comet, designed to meet your needs without breaking the bank.
From
Throttle Bodies & Carb Part
replacements to
Carburetor Kits
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Air Intakes for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Air Intakes for your 1968 Mercury Comet at great prices.
Our Air Intakes inventory for this model
ranges from just $0.25 to $1,949.99, with
an average price of $437.21.
Our 131 Air Intakes in stock come from 7 trusted brands, so you’re sure to find the right part for your 1968 Mercury Comet without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1968 Mercury Comet, we stock popular OEM and aftermarket Air Intakes from top names
like Felpro, Edelbrock, Holley, and more.
Felpro Air Intakes
start at just $3.49 and boast an impressive 4.6 stars average rating from customers.
Edelbrock and Holley also bring quality to the table, with Air Intakes available starting at $13.99, and at an average 4.4 stars rating.
With 319 customer reviews and counting, our 1968 Mercury Comet Air Intakes have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Air Intake upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 1968 Mercury Comet is always ready to roll. We’re committed to providing you with everything you need to keep your Comet in top shape, all in one place.
Start shopping confidently below for your 1968 Mercury Comet!
Best-Selling Throttle Bodies & Carb Parts for 1968 Mercury Comets
Enhance the driving experience in your Mercury with 1 quality Throttle Bodies & Carb Part components, starting at $40.99.
Edelbrock – Edelbrock Throttle Lever For Ford 1968 And Later, Gold Iridited Finish, 1483 (Part No.1483)
from
$40.99
The Edelbrock Throttle Lever Adapter No: 1483 fits 1968 and later Ford automatic transmission equipped vehicles with cable operated throttle (except A.O.D.). Accepts cruise control. Use with appropriate throttle cable plate when necessary. Has a gold iridized finish to match Edelbrock AVS2, Performer Series Carbs.
See More
Most Popular 1968 Mercury Comet Carburetor Kits
Customize your Mercury with 11 Carburetor Kits products
like Carburetor and Injector Seal Kits and
Carburetor Gasket Kit, all
priced under $60.99.
Edelbrock – Edelbrock Fuel Bowl Gaskets for Holley Carburetors, Direct replacement for proper fit, 12382 (Part No.12382)
from
$16.99
The Edelbrock No. 12382 fuel bowl gasket is designed for Holley 2300, 4150, 4160, 4175 and 4500 carburetors. Kit includes two black nitrile fuel bowl gaskets.
See More
Edelbrock – Edelbrock Carburetor Repair Kit #12750 Fits Most Holley 4160 Carburetors (Part No.12750)
Edelbrock – Edelbrock Carburetor Repair Kit #12760 Fits Most Holley 4150 Carburetors (Part No.12760)
Wells Vehicle Electronics – Wells Vehicle Electronics Carburetor Repair Kit, 2G1793 (Part No.2G1793)
from
$46.99
WVE is a leading source of advanced vehicle electronics components for replacement applications in the automotive aftermarket and original equipment applications. WVE offers high-technology manufacturing along with innovative solutions and improvements to OE designs. Every component either matches or improves on the OE design to ensure fast, easy installation, superior performance and reliability.
See More
Wells Vehicle Electronics – Wells Vehicle Electronics Carburetor Repair Kit, 2G1822 (Part No.2G1822)
from
$37.99
WVE is a leading source of advanced vehicle electronics components for replacement applications in the automotive aftermarket and original equipment applications. WVE offers high-technology manufacturing along with innovative solutions and improvements to OE designs. Every component either matches or improves on the OE design to ensure fast, easy installation, superior performance and reliability.
See More
Wells Vehicle Electronics – Wells Vehicle Electronics Carburetor Repair Kit, 2G1767 (Part No.2G1767)
from
$33.99
WVE is a leading source of advanced vehicle electronics components for replacement applications in the automotive aftermarket and original equipment applications. WVE offers high-technology manufacturing along with innovative solutions and improvements to OE designs. Every component either matches or improves on the OE design to ensure fast, easy installation, superior performance and reliability.
See More
Wells Vehicle Electronics – Wells Vehicle Electronics Carburetor Repair Kit, 2G1792 (Part No.2G1792)
from
$28.99
WVE is a leading source of advanced vehicle electronics components for replacement applications in the automotive aftermarket and original equipment applications. WVE offers high-technology manufacturing along with innovative solutions and improvements to OE designs. Every component either matches or improves on the OE design to ensure fast, easy installation, superior performance and reliability.
See More
Wells Vehicle Electronics – Wells Vehicle Electronics Carburetor Repair Kit, 2G1768 (Part No.2G1768)
from
$25.99
WVE is a leading source of advanced vehicle electronics components for replacement applications in the automotive aftermarket and original equipment applications. WVE offers high-technology manufacturing along with innovative solutions and improvements to OE designs. Every component either matches or improves on the OE design to ensure fast, easy installation, superior performance and reliability.
See More
Wells Vehicle Electronics – Wells Vehicle Electronics Carburetor Repair Kit, 2G1762 (Part No.2G1762)
from
$24.99
WVE is a leading source of advanced vehicle electronics components for replacement applications in the automotive aftermarket and original equipment applications. WVE offers high-technology manufacturing along with innovative solutions and improvements to OE designs. Every component either matches or improves on the OE design to ensure fast, easy installation, superior performance and reliability.
See More
Wells Vehicle Electronics – Wells Vehicle Electronics Carburetor Repair Kit, 2G1784 (Part No.2G1784)
from
$22.99
WVE is a leading source of advanced vehicle electronics components for replacement applications in the automotive aftermarket and original equipment applications. WVE offers high-technology manufacturing along with innovative solutions and improvements to OE designs. Every component either matches or improves on the OE design to ensure fast, easy installation, superior performance and reliability.
See More
Wells Vehicle Electronics – Wells Vehicle Electronics Carburetor Repair Kit, 2G1794 (Part No.2G1794)
from
$21.99
WVE is a leading source of advanced vehicle electronics components for replacement applications in the automotive aftermarket and original equipment applications. WVE offers high-technology manufacturing along with innovative solutions and improvements to OE designs. Every component either matches or improves on the OE design to ensure fast, easy installation, superior performance and reliability.
See More
Top Picks for 1968 Mercury Comet Air Cleaner Parts
Upgrade Mercury Comets with top-quality Air Cleaner Parts parts, including 4 OEM and aftermarket selections for your 1968 model.
Edelbrock – "Edelbrock Pro-Flo Black 14"" Round Air Cleaner with 3"" Paper Element (Deep Flange), 1223" (Part No.1223)
from
$50.99
“Edelbrock triple chrome-plated round air cleaner No: 1223 works with all popular 5-1/8″” diameter carburetors (Performer Series, Thunder Series AVS, Holley, Thermo-Quad, Quadra jet and Carter AFB). The 10″” and 14″” models have knock-outs in the air cleaner base for use with Edelbrock crank case ventilation adapter No: 1205 (sold separately). No: 1208, No: 1209 and No: 1221 fit all Edelbrock carburetors. Heights of air cleaners are in parentheses, measured from the gasket flange to the top of the supplied retaining nut. Dimensions are accurate within 1/8″”.”
See More
Felpro – Felpro Air Cleaner Mounting Gasket, 60032 (Part No.60032)
from
$3.49
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
See More
Edelbrock – "Edelbrock Pro-Flo Chrome 14"" Round Air Cleaner with 3"" Paper Element (Deep Flange), 1221" (Part No.1221)
from
$46.99
“Edelbrock triple chrome-plated round air cleaner No: 1221 works with all popular 5-1/8″” diameter carburetors (Performer Series, Thunder Series AVS, Holley, Thermo-Quad, Quadra jet and Carter AFB). The 10″” and 14″” models have knock-outs in the air cleaner base for use with Edelbrock crank case ventilation adapter No: 1205 (sold separately). No: 1208, No: 1209 and No: 1221 fit all Edelbrock carburetors. Heights of air cleaners are in parentheses, measured from the gasket flange to the top of the supplied retaining nut. Dimensions are accurate within 1/8″”.”
See More
Victor Reinz – Victor Reinz Air Cleaner Mounting Gasket, 71-13854-00 (Part No.71-13854-00)
from
$3.49
With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.
See More
In-Demand Carburetor Parts for 1968 Mercury Comets
Select from 105 premium Carburetor Parts parts for your 1968 Mercury Comet, with prices ranging from $2.99 to $1,949.99.
Felpro – Felpro Carburetor Mounting Gasket, 60094-1 (Part No.60094-1)
from
$3.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
See More
Edelbrock – Edelbrock Carburetor Accelerator Pump Diaphragm 30cc Gasoline, 12400 (Part No.12400)
from
$13.99
The Edelbrock Accelerator Pump Diaphragm 30cc Gasoline No: 12400 for 4150 Carburetors Proper installation is the responsibility of the installer. Improper installation will void your warranty and may result in poor performance and engine or vehicle damage
See More
Edelbrock – Edelbrock Performer 1404 Carburetor: 500 CFM, 4 Barrel, Square Bore, Manual Choke Inlet (Part No.1404)
from
$457.99
“The Edelbrock 1404 Performer Series 500 CFM manual choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characteristics make the 1404 Performer Series 500 CFM manual choke carburetor an outstanding street performer. The first one is that metering rods are utilized to transition between circuits. The carburetor is unaffected by engine backfires, which means that there are no power valves to blow out, and the rods can be changed in seconds without carburetor removal or fuel draining. Secondly, the carburetor has the unique ability to “”hold a tune””, so once it is tuned, the carburetor stay’s tuned. What this means to you is that compared to other carburetors, the performance remains consistent and the calibration stays unchanged. The lightweight all-aluminum body features a two-piece body that resists warping and is compatible with gasohol and blended fuels. The simple tub-type bowls and rear-pivot floats all contribute to a carburetor that’s reliable, user-friendly and is easily tunable for miles and miles of trouble-free operation.”
See More
Holley – Holley Performance and Race Carburetor: 600 CFM, Manual Choke, 4 Barrel, Square Bore, Dual Inlet, 0-4776C (Part No.0-4776C)
from
$799.99
The Ultra Double Pumper Carburetors feature all aluminum construction and are equipped with metering blocks and a base plate made from 6061-T6 billet aluminum. Three different anodized color options (Red, Blue, or Black) allow for a personalized look while maintaining the ultra high strength and durability you get from billet. They weigh in at approximately 5 lbs less than a comparable zinc carburetor. The new Ultra Double Pumper Carburetors have an enhanced fuel curve for optimum performance, with many more features such as aluminum construction; anodized billet aluminum metering blocks and base plate; 4 corner idle for precise idle control; mechanical secondaries for great performance; clear fuel level sight plugs for easy, no mess fuel level adjustments; Ford automatic transmission kickdown for use on popular Ford transmissions; four vacuum ports for all necessary vacuum accessories; and for the first time on a Double Pumper, factory pre-set electric choke for easy, fast cold start-ups. The clean, polished look coupled with Red, Blue, or Black metering blocks and throttle body will certainly set your ride apart whether you are at the show or track. Dont trust your performance to just anyone, Holley is the only Modular carburetor company that has been in business for over 100 years and has powered every NASCAR champion since the 60s.
See More
Edelbrock – Edelbrock Carburetor Vacuum Secondary Spring Kit, 12412 (Part No.12412)
from
$26.99
The Edelbrock No: 12412 Vacuum Secondary Spring Kit includes 7 springs that will fit on Holley 4150, 4150HP, 4160 series and various Demon Carburetors.
See More
Edelbrock – Edelbrock Performer Carburetor #9906 600 CFM With Electric Choke, Satin Finish (Non-EGR) Remanufactured (Part No.9906)
from
$414.99
Burnished aluminum. GM/MAC- style throttle linkage. Electric choke installed from factory. Easy tuning with 2 piece design. Smooth secondary transition. Both timed for full vacuum ports. Includes PCV outlet.
See More
United Carb – United Carb Carburetor-Remanufactured, 7-7154 (Part No.7-7154)
from
$303.99
Made in the USA, this remanufactured carburetor is completely disassembled and all internal parts, such as gaskets, gas filters, needle/seats and accelerator plunger cups, are discarded. All metal castings are thoroughly cleaned and restored to OEM (original equipment manufacturer) finish. Then the carburetor is reassembled to OEM-quality standards using all new component parts. Each carburetor is flow tested to simulate actual engine conditions, and all internal and external adjustments are set to OEM specifications.
See More
United Carb – United Carb Carburetor-Remanufactured, 7-7238 (Part No.7-7238)
from
$219.99
Made in the USA, this remanufactured carburetor is completely disassembled and all internal parts, such as gaskets, gas filters, needle/seats and accelerator plunger cups, are discarded. All metal castings are thoroughly cleaned and restored to OEM (original equipment manufacturer) finish. Then the carburetor is reassembled to OEM-quality standards using all new component parts. Each carburetor is flow tested to simulate actual engine conditions, and all internal and external adjustments are set to OEM specifications.
See More
Holley – Holley Prem Street Carbs (Avengers), 0-81570 (Part No.0-81570)
from
$687.99
Square flange bolt pattern. Performance calibrated. The ultimate vacuum secondary street performance upgrade.
See More
Edelbrock – Edelbrock AVS2 1901 Carburetor: 500 CFM, 4 Barrel, Square Bore, Electric Choke Inlet (Part No.1901)
from
$519.99
The Edelbrock #1901 AV2 Series 500 cfm Carburetor is designed and calibrated for small cubic-inch single carb applications, match with an Edelbrock Performer or Performer EPS manifold or other brands of similar design. Includes both timed and full vacuum ports for ignition advance. #1901 is calibrated for single-quad applications and factory equipped with: Metering Jets – Primary .095, Secondary .095, Primary Rod .070 x .052, orange spring (5′ Hg). Use carb Studs #8008 or #8024 if needed. Match with an Edelbrock intake manifold for the ultimate induction upgrade.
See More
Felpro – Felpro Carburetor Mounting Gasket, 60059 (Part No.60059)
from
$3.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
See More
Felpro – Felpro Carburetor Mounting Gasket, 13130 (Part No.13130)
from
$2.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
See More
Edelbrock – Edelbrock Performer Series Carburetor Calibration Kit, Helps get the best performance, 1487 (Part No.1487)
Edelbrock – Edelbrock AVS2 1905 Carburetor: 650 CFM, 4 Barrel, Square Bore, Manual Choke Inlet (Part No.1905)
from
$428.99
“orange (5″” Hg) step-up spring. Use our Carburetor Stud Kits #8008 or #8024 if needed. Match with a variety of manifolds that include Edelbrock Performer, Performer EPS, RPM Air-Gap, Performer RPM, Torker II or other brands of similar design. For a black-finished AVS2, order part #19053.”
See More
Edelbrock – Edelbrock AVS2 1902 Carburetor: 500 CFM, 4 Barrel, Square Bore, Manual Choke Inlet (Part No.1902)
from
$458.99
The Edelbrock #1902 AV2 Series 500 cfm Carburetor is designed and calibrated for small cubic-inch single carb applications, match with an Edelbrock Performer or Performer EPS manifold or other brands of similar design. Includes both timed and full vacuum ports for ignition advance. #1902 is calibrated for single-quad applications and factory equipped with: Metering Jets – Primary .095, Secondary .095, Primary Rod .070 x .052, orange spring (5′ Hg). Use carb Studs #8008 or #8024 if needed. Match with an Edelbrock intake manifold for the ultimate induction upgrade.
See More
Edelbrock – Edelbrock Fuel Bowl Inverted Flare Fuel Inlet Fitting #12415 (Part No.12415)
United Carb – United Carb New Carburetor, 7-7154N (Part No.7-7154N)
Edelbrock – Edelbrock Non-Adjustable Carburetor Needle and Seat #12605 Size .110 With Viton Tip (Part No.12605)
from
$22.99
Edelbrock Non-Adjustable Carburetor Needle and Seat #12605 Size .110 With Viton Tip.
See More
Holley – Holley Street/Strip Carbs, 0-4779C (Part No.0-4779C)
from
$870.99
The Ultra Double Pumper Carburetors feature all aluminum construction and are equipped with metering blocks and a base plate made from 6061-T6 billet aluminum. Three different anodized color options (Red, Blue, or Black) allow for a personalized look while maintaining the ultra high strength and durability you get from billet. They weigh in at approximately 5 lbs less than a comparable zinc carburetor. The new Ultra Double Pumper Carburetors have an enhanced fuel curve for optimum performance, with many more features such as aluminum construction; anodized billet aluminum metering blocks and base plate; 4 corner idle for precise idle control; mechanical secondaries for great performance; clear fuel level sight plugs for easy, no mess fuel level adjustments; Ford automatic transmission kickdown for use on popular Ford transmissions; four vacuum ports for all necessary vacuum accessories; and for the first time on a Double Pumper, factory pre-set electric choke for easy, fast cold start-ups. The clean, polished look coupled with Red, Blue, or Black metering blocks and throttle body will certainly set your ride apart whether you are at the show or track. Dont trust your performance to just anyone, Holley is the only Modular carburetor company that has been in business for over 100 years and has powered every NASCAR champion since the 60s.
See More
Holley – Holley Carburetor – 770 CFM Alum Street Avenger E/C, 0-83770 (Part No.0-83770)
from
$699.99
Square flange bolt pattern. Performance calibrated. The ultimate vacuum secondary street performance upgrade.
See More
Edelbrock – Edelbrock Performer 1400 Carburetor: 600 CFM, 4 Barrel, Square Bore, Electric Choke Inlet (Part No.1400)
from
$523.99
“The Edelbrock 1400 Performer Series 600 CFM electric choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characteristics make the 1400 Performer Series 600 CFM electric choke carburetor an outstanding street performer. The first one is that metering rods are utilized to transition between circuits. The carburetor is unaffected by engine backfires, which means that there are no power valves to blow out. Secondly, the carburetor has the unique ability to “”hold a tune””, so the carburetor stay’s tuned. What this means to you is that compared to other carburetors, the performance remains consistent, and the calibration stays unchanged. The lightweight all-aluminum body features a two-piece body that resists warping and is compatible with today€™s commercially available gasoline, gasohol, and blended fuels (E10, not E85). The simple tub-type bowls and rear-pivot floats all contribute to a carburetor that’s reliable and user-friendly for miles and miles of trouble-free operation. The #1400 is an emissions legal part when used with 1980 and older GM V8€™s (Chevrolet, Cadillac, Buick, GMC, Pontiac, and Oldsmobile) originally equipped with non-feedback carburetors. May require the use of adapter plate #2696.”
See More
Edelbrock – Edelbrock Carburetor Accelerator Pump, 12401 (Part No.12401)
from
$33.99
Edelbrock No: 12401 50cc Accelerator Pump Diaphragm for 4150 Carburetors. Proper installation is the responsibility of the installer. Improper installation will void your warranty and may result in poor performance and engine or vehicle damage
See More
Holley – Holley Street Carburetor: 750 CFM, Electric Choke, 4 Barrel, Square Bore, Single Inlet, Shiny, 0-80459SA (Part No.0-80459SA)
from
$549.99
The Street HP uses the best features from Holley’s race Bred 4150 HP carbs, but tamed for street and light competition use. The contoured main body from the 4150 HP has a tumble polished shiny finish. The metering system includes a timed spark port for a vacuum advance distributor and is calibrated for a hot street and strip engine setup for outstanding throttle response and drivability. A street HP base plate is used so there are plenty of vacuum ports for power brakes, PCV, etc.
See More
Holley – Holley Professional Race Carburetor: 1150 CFM, No Choke, 4 Barrel, 4500 Bore, Dual Inlet, Hard Core Gray, 0-80906HB (Part No.0-80906HB)
from
$1949.99
The Gen 3 utilizes high capacity fuel bowls which feature 20% more fuel capacity to eliminate starvation, integrated fuel shelf to minimize fuel aeration and internal baffling to control fuel slosh. Other features include all aluminum construction, 12 hole billet booster inserts, fully tunable billet metering blocks, adjustable external linkage, throttle position sensor mounting points and knurled (hand adjustable) curb idle screws Each calibration has been dyno and track tested to deliver proven performance!
See More
Most Sold 1968 Mercury Comet Intake Manifold Parts
Explore our best-selling Mercury parts for the 1968 Comet among 10 OEM and aftermarket options starting from $3.99.
Felpro – Felpro Engine Intake Manifold Gasket Set, MS 90145 (Part No.MS 90145)
from
$28.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
See More
Felpro – Felpro Engine Intake Manifold Gasket Set, MS 90103-1 (Part No.MS 90103-1)
from
$28.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
See More
Edelbrock – Edelbrock Performer RPM Ford Small Block 302 Intake Manifold, 7121 (Part No.7121)
from
$359.99
Edelbrock part #7121 Performer RPM 302 intake manifold is designed for street 289-302 c.i.d. Ford V8’s. This dual-plane high rise manifold has excellent high rpm power while retaining throttle response. No provisions for exhaust heated choke. Edelbrock carbs will work with Ford automatic overdrive trans (AOD) when used with Lokar bracket SRK-4000, for more info call (865) 966-2269 or go to www.lokar.com.
See More
Edelbrock – Edelbrock Intake Manifold Gasket, 7224 (Part No.7224)
from
$30.99
Edelbrock part No: 7224 Intake Gaskets for 1985-1976 390-428 FE Fords allow for optimum flow and performance. Any gasket can create a seal, but a good gasket can do it with less clamping force, and for a longer period of time. The new MP-2N Micropore technology does not use solvents making our gaskets environmentally friendly. Impervious to most chemicals, this synthetic fiber composite provides a high recovery under load. This means that when compressed, the gasket will conform to any imperfections on the sealing surface even using lower flange pressures. A nitrile bead around each port opening makes the seal even better.
See More
Dorman – Dorman Brass Cup Expansion Plug 25.73mm SC, Height 0.270 (Sold by each), 565-018 (Part No.565-018)
from
$3.99
This engine intake manifold expansion plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
See More
Dorman – Dorman Steel Cup Expansion Plug 1-53/64 In., Height 0.380 (Sold by each), 555-083 (Part No.555-083)
from
$3.99
This engine expansion plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
See More
Holley – Holley Intake Manifolds, 827012 (Part No.827012)
from
$707.99
Holley Intake Manifolds, 827012. PERFORMANCE PARTS>PERFORMANCE DRESS UP>DRESS UP COMPONENTS>AIR CLEANER ASSEMBILIES from Holley
See More
Holley – Holley Single Plane 4150 Carbureted Intake Manifold, 300-277 (Part No.300-277)
from
$478.99
“The intake manifolds are designed for use with 289-347 cubic inch Small Block Ford engines with a 8.2″” deck height.”
See More
Edelbrock – Edelbrock Intake Manifold Gasket, 72208 (Part No.72208)
from
$186.99
Edelbrock part No: 72208 Bulk Pack Intake Gaskets for 1963-1996 Small-Block Fords allow for optimum flow and performance. Any gasket can create a seal, but a good gasket can do it with less clamping force, and for a longer period of time. The new MP-2N Micropore technology does not use solvents making our gaskets environmentally friendly. Impervious to most chemicals, this synthetic fiber composite provides a high recovery under load. This means that when compressed, the gasket will conform to any imperfections on the sealing surface even using lower flange pressures. A nitrile bead around each port opening makes the seal even better.
See More
Victor Reinz – Victor Reinz Engine Intake Manifold Gasket Set, 11-10137-01 (Part No.11-10137-01)
from
$26.49
Withstanding harsh environments, while sealing fuel, air, coolant, and oil, is the challenging task for intake manifold gaskets. Victor Reinz product coverage includes upper manifold (plenum) gaskets, lower intake manifold gaskets and additional gaskets and seals as required. Victor Reinz engineers choose from the worlds broadest range of gasket materials and constructions, and select the best design for the specific engine, whether it is import, domestic, heavy cast iron or lightweight aluminum.
See More
Top-Rated Air Intakes Brands For Your 1968 Mercury Comet
Shop for the best-rated brands offering Air Intakes and other products for your 1968 Mercury Comets. Below you’ll find some of our best rated Air Intakes from Felpro, Edelbrock, and Holley, and more. Air Intakes from these brands that fit a 1968 Comet start at just $3.49 and are rated as high as 4.6 stars. OEM and aftermarket Air Intakes don’t get more top quality, durable, and affordable than from the brands below.
Popular Felpro 1968 Mercury Comet Air Intakes
When it comes to maintaining or upgrading your 1968 Mercury Comet, using quality Air Intakes is essential to ensure durability and a perfect fit. Felpro ticks all of those boxes. We offer a wide selection of Felpro Air Intakes, specifically designed for the 1968 Mercury Comet. With over 3 Felpro brand Air Intakes in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $3.49, with an average price of just $12.16. Plus, with over 7 customer reviews and an average rating of 4.6 stars, you can trust that our Felpro Air Intakes will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$3.99
(4)
Felpro Carburetor Mounting Gasket, 60094-1
“Excellent quality USA made felpro gaskets”
from
$28.99
(1)
Felpro Engine Intake Manifold Gasket Set, MS 90145
“Fit perfectly just what I needed.”
Popular Edelbrock 1968 Mercury Comet Air Intakes
Edelbrock auto parts is one of the highest quality Air Intake brands in the market. Any 1968 Mercury Comet owner should feel confident when installing genuine Edelbrock parts in their vehicle. To ensure the best fit and performance for your 1968 Comet, Advance Auto Parts carries a full inventory of 3 Edelbrock Air Intakes. Plus you will be keeping your Mercury in peak condition while saving money because prices on these Edelbrock Air Intakes range from $13.99 to $457.99, plus, with more than 12 customer reviews and an impressive 4.4 stars average rating, you can be confident the Fram Air Intakes below will deliver on both quality and value.
from
$50.99
(9)
"Edelbrock Pro-Flo Black 14"" Round Air Cleaner with 3"" Paper Element (Deep Flange), 1223"
“I like the look of the matte black air cleaner cover. Now just need to dress up the rest of the engine to match”
from
$13.99
(1)
Edelbrock Carburetor Accelerator Pump Diaphragm 30cc Gasoline, 12400
“exatly what I needed”
from
$457.99
(2)
Edelbrock Performer 1404 Carburetor: 500 CFM, 4 Barrel, Square Bore, Manual Choke Inlet
“Easy install with matching Edelbrock 1107 intake manifold. Clear instructions with DVD. I had to flip my carb 180 degs so as to interface with my flat”
FAQs for 1968 Mercury Comet Air Intakes
Which Air Intakes are best-sellers for 1968 Mercury Comets?
Out of 131 Air Intakes that fit 1968 Mercury Comets, the following parts are the top sellers:
- Felpro Engine Intake Manifold Gasket Set, MS 90103-1 (5184436) – $28.99
- Felpro Carburetor Mounting Gasket, 60059 (5181771) – $3.99
- Edelbrock Carburetor Repair Kit #12750 Fits Most Holley 4160 Carburetors (10648540) – $47.99
What’s the price range for 1968 Mercury Comet Air Intakes?
Air Intake prices for the 1968 Mercury Comet start at $0.25 and go up to $1,949.99 for the most premium parts.
What’s the average price of a Air Intake for a 1968 Mercury Comet?
The average price for Air Intakes for the 1968 Mercury Comet is $437.21. Keep in mind the variety of part types within our Air Intake category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Air Intakes for other Mercury Comet model years?
What are the cheapest Air Intakes for my 1968 Mercury Comet?
The cheapest 1968 Mercury Comet Air Intakes we carry in stock are:
- Felpro Carburetor Mounting Gasket, 13130 (3209881) – $2.99
- Felpro Air Cleaner Mounting Gasket, 60032 (3203808) – $3.49
- Victor Reinz Air Cleaner Mounting Gasket, 71-13854-00 (50311994) – $3.49
- Felpro Carburetor Mounting Gasket, 60059 (5181771) – $3.99
- Felpro Carburetor Mounting Gasket, 60094-1 (5181852) – $3.99
What are the top-rated Air Intakes that fit the 1968 Mercury Comet?
Out of 319 reviews by customers, our 1968 Mercury Comet Air Intakes have an average customer rating of . These are some of the highest-rated Air Intake types for the 1968 Mercury Comet and their top-rated products:
- Carburetor Kits
- Air Cleaner Parts
What types of Air Intakes do you sell for my 1968 Mercury Comet?
As of 8/2/26, these are some of the most in-demand types of Air Intakes for a 1968 Mercury Comet:
Can I get help with 1968 Mercury Comet Air Intake orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Mercury Air Intakes and more.
What is your return policy for Mercury Comet Air Intakes?
Advance Auto Parts keeps returns simple. For new Mercury Comet Air Intakes and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
