1968 Jeep Gladiator Performance and Racing Products
Find Your Specific 1968 Jeep Gladiator Performance and Racing Products
Below you will find various in-demand Jeep Performance and Racing Products, components and accessories for your 1968 Gladiator. Advance Auto Parts has popular Gladiator parts like Performance Oil Filters, Performance Ignition Products, Performance Engines and more. You’ll also find aftermarket and OEM Performance and Racing Products for other Gladiator model years including
1962,
1963,
1964,
1965,
1966,
1967,
1969 and more. Select a category of 1968 Jeep Gladiator Performance and Racing Products below and start saving instantly.
Popular 1968 Jeep Gladiator Performance and Racing Products Categories
Essential Performance and Racing Products for 1968 Jeep Gladiators
Holley – Off Road Carbs (Part No.0-90670)
from
$819.99
The off-road truck avenger is designed specifically for off-road applications. The unique fuel metering block eliminates fuel spillover through the boosters at extreme angles allowing for 40 degree climbing, 30 degree side hill maneuvers and nose-down descents to avoid hesitations, stalling and flooding typically associated with carbs in an off road environment. The 470 CFM off-road truck avenger is the perfect carburetor for 4 cylinder, V-6, and inline 6 cylinder engines. Viton(R) is a registered trademark of DuPont Performance Elastomers.
Product Features:
See More
Product Features:
- Gold Dichromate Finish For Extreme Off Road Environments
- Single Feed Fuel Inlet For Ease Of Installation
- Optimized Off-Road Calibration That Works Out-Of-The-Box
- Factory Preset Electric Choke For Easy Startups
- Quick Change Vacuum Housing Cap To Tune For Performance/Fuel Econ
- One Piece Off-Road Vent Tube Eliminates Fuel Spillover
- Metering Block For Flood Free Op. 40 deg. Climb/30 deg. Side Hill
- Limited Lifetime Warranty Defects In Material/Workmanship
Edelbrock – Performer 1405 Carburetor: 600 CFM, 4 Barrel, Square Bore, Manual Choke Inlet (Part No.1405)
from
$394.99
The Edelbrock 1405 Performer Series 600 CFM manual choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characteristics make the 1405 Performer Series 600 CFM manual choke carburetor an outstanding street performer. The first one is that metering rods are utilized to transition between circuits. The carburetor is unaffected by engine backfires, which means that there are no power valves to blow out, and the rods can be changed in seconds without carburetor removal or fuel draining. Secondly, the carburetor has the unique ability to “hold a tune”, so once it is tuned, the carburetor stay’s tuned. What this means to you is that compared to other carburetors, the performance remains consistent and the calibration stays unchanged. The lightweight all-aluminum body features a two-piece body that resists warping and is compatible with gasohol and blended fuels. The simple tub-type bowls and rear-pivot floats all contribute to a carburetor that’s reliable, user-friendly and is easily tunable for miles and miles of trouble-free operation.
Product Features:
See More
Product Features:
- Edelbrock products offer improved performance and aesthetics for a broad array of vehicles and engines. ‘Proven performance’ is the philosophy by which Edelbrock was founded and it continues to this day with the highest standards for performance and quali
- Manual Choke
- 4 Barrel Count
- Square Bore
- Smooth Secondary Transition
- Both Timed and Full Vacuum Ports
- Includes PCV Outlet
MSD Ignition – Distributor; 6-cyl. AMC Jeep 232-258; 4.0L (Part No.8516)
from
$665.99
There is a big following of AMC enthusiasts that are cruising a 401 equipped Javelin or trail blazing in a rock crawling Jeep with an inline 6-cylinder! MSD offers two Pro-Billet Distributors to deliver accurate trigger signals and are maintenance-free! This pick-up never requires adjustment and simply plugs right into an MSD Ignition Control. Just above it and under our strong race rotor is an adjustable mechanical advance assembly. The chro-moly weights of this assembly slide on nylon bushings producing smooth movement of the timing. You can easily adjust the curve to match your engine’s requirements with the supplied springs and stop bushings. Each precision CNC-machined billet aluminum housing features a sealed ball-bearing and long sintered bushing for stability at any rpm and increased endurance. An oversized steel shaft receives a QPQ coating to reduce friction and prevent corrosion. Both distributors are supplied with a high quality cap, rotor and gear. There is even a vacuum advance canister for street cruising economy!
Product Features:
See More
Product Features:
- Designed For Street/Performance Use w/Mech or Vacuum Advance
- Must Be Used w/An MSD Ignition Control
- Supplied w/Socket Style Distributor Cap And Rotor
- Nylon pads ensure smooth operation of the advance weights
- Advance weight pins are staked and tig welded to the plate
- Mech. advance assem. can be locked out for crank trigger systems
- Advance plate and weights are fine blanked from chrome moly steel
- QPQ coated for friction reduction
Mallory – Unilite Electronic Ignition Distributor Series 37 (Part No.3760001)
from
$614.99
The industry standard with adjustable mechanical advance curve. Triggered by photo-optic infrared LED system. Improved combustion efficiency and economy, increased spark plug life and cold weather starting, and maintenance free operation.
Product Features:
See More
Product Features:
- Improved Combustion And Economy
- Increased Spark Plug Life
- Improved Cold Weather Starting
- Maintenance Free Operation
- Accurate Spark Timing
- Self-Lubricating Bushings
- Years Of Trouble-Free Service
Mr. Gasket – Thermocap Radiator Cap (Part No.2471S)
from
$53.99
Knowing your coolant temperature can help to prevent burn injuries. Thermocap Cap, with its built-in calibrated thermometer, indicates the coolant temperature. This is useful information prior to cap removal. Never attempt to remove Thermocap Cap when the coolant temperature is very hot. The escaping hot coolant and steam may burn you. Reclamation valve works great with your coolant recovery system. Your radiator can reclaim coolant from your overflow bottle. Wide 30 degree to 270 degree F temperature range. Calibrated in centigrade and Fahrenheit. Color-coded temperature ranges.
Product Features:
See More
Product Features:
- Indicates Coolant Temperature
- Helps to Prevent Injuries from coolant or steam burns
- Integrated Coolant Reclamation Valve
- Improves Underhood Appearance
- Fahrenheit and centigrade readings
- Various valve pressures available
Mr. Gasket – Thermocap Radiator Cap (Part No.2470B)
from
$55.99
The fastest, easiest way to know exactly when it’s safe to open your radiator cap. ThermoCap, with its built-in calibrated thermometer, indicates the coolant temperature.
Product Features:
See More
Product Features:
- Indicates coolant temperature
- Helps prevent coolant injuries
- Fahrenheit and centigrade readings
- Color-coded temperature ranges
- Integrated coolant reclamation valve
- Improves under-hood appearance
- Chromed crown with a colored trim ring
MSD Ignition – Blaster 2 Coil: High Performance Ignition Upgrade (Part No.8202)
from
$55.99
If you are looking to upgrade your stock coil, or want to compliment the performance of your MSD blaster ignition, MSD 5, 6 or 7, the blaster coil line is the right choice. All of the blaster coils are designed for improved spark output. Special 100:1 windings are used to provide maximum build-up of voltage. These windings are held secure and kept cool in an oil filled metal canister. The tower assembly is molded of durable alkyd material due to its high dielectric characteristics while wide spaced brass primary terminals prevent the possibility of spark. There are several versions of the blaster coil available. All of them have the same internal specifications, but have different housings or components. Each blaster coil can be used with a stock ignition, blaster ignition, MSD 5, 6 or 7 ignition control. Most late model vehicles with electronic ignitions do not require a ballast resistor, check your ignition and manufacturers specifications to determine if a ballast is required in your application.
Product Features:
See More
Product Features:
- Improved output coil for electronic ignitions
- Works w/Blaster Ignition Or MSD 5/6/7 Series
- Ballast Resistor Required If Used w/Stock Points Ignition
- Alkyd tower w/high dielectric properties lessens carbon tracking
Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)
from
$204.99
Universal street and strip. For street-driven vehicles with breaker point ignition or OE electronic ignition. Delivers optimum performance when used with these Mallory ignition products: UNILITE (R) distributor with a HYFIRE (R) capacitive discharge ignition, magnetic breaker less distributor with a HYFIRE (R) capacitive discharge ignition, or dual point distributor. Effective to approximately 6500 RPM when used with a point type distributor (depending on engine combination). Effective to approximately 8000 RPM when used with a Mallory HYFIRE electronic ignition control (depending on engine combination).
Product Features:
See More
Product Features:
- Glass Filled Polyester Case
- Longer Spark Duration
- Increased Performance
- No Energy Loss Due To Arcing
- Includes Brass Contact Terminal
Mallory – Unilite Ignition Module (Part No.605)
from
$95.99
Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.
Product Features:
See More
Product Features:
- Service Part
- No Moving Parts To Wear Out
- Self Contained Unit
- Can Drive OEM
- Can Drive High Performance Ignition Coils
Mallory – Distributor Wiring Harness (Part No.29349)
K&N – Premium Oil Filter: Ideal for Synthetic, Conventional & Blended Oil, Protects Your Engine (Part No.HP-2003)
from
$19.99
K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N’s pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.
Product Features:
See More
Product Features:
- Designed to allow high flow rates and a consistent flow of oil to your engine
- Pleated synthetic-blend filtration media removes most harmful contaminants
- Fast and easy Wrench-Off removal using the welded one-inch hex nut
- High capacity to withstand the service intervals recommended by vehicle manufacturers
- Heavy-duty canister for outstanding durability
- Laboratory tested to ensure excellent capacity, efficiency, and mechanical strength
- Designed to operate with all synthetic, conventional, and blended motor oils
- 1-Year Limited Warranty
Upgrade your 1968 Jeep Gladiator with Top-Quality Performance and Racing Products
When it comes to maintaining or upgrading your 1968 Jeep Gladiator, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Jeep or enhancing its overall performance, Performance and Racing Products are key to keeping your Gladiator functioning at its best. At Advance Auto Parts, we offer a wide selection of 20 Performance and Racing Products for the 1968 Jeep Gladiator, designed to meet your needs without breaking the bank.
From
Performance Oil Filter
replacements to
Performance Ignition Products
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 1968 Jeep Gladiator at great prices.
Our Performance and Racing Products inventory for this model
ranges from just $12.99 to $819.99, with
an average price of $287.94.
Our 20 Performance and Racing Products in stock come from 6 trusted brands, so you’re sure to find the right part for your 1968 Jeep Gladiator without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1968 Jeep Gladiator, we stock popular OEM and aftermarket Performance and Racing Products from top names
like Mallory, K&N, Holley, and more.
Mallory Performance and Racing Products
start at just $95.99 and boast an impressive 4.9 stars average rating from customers.
K&N and Holley also bring quality to the table, with Performance and Racing Products available starting at $19.99, and at an average 4.8 stars rating.
With 132 customer reviews and counting, our 1968 Jeep Gladiator Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Batteries and Chargers, Fluids and Chemicals
and more to make sure your 1968 Jeep Gladiator is always ready to roll. We’re committed to providing you with everything you need to keep your Gladiator in top shape, all in one place.
Start shopping confidently below for your 1968 Jeep Gladiator!
Best-Selling Performance Oil Filters for 1968 Jeep Gladiators
Enhance the driving experience in your Jeep with 1 quality Performance Oil Filter components, starting at $19.99.
K&N – Premium Oil Filter: Ideal for Synthetic, Conventional & Blended Oil, Protects Your Engine (Part No.HP-2003)
from
$19.99
K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N’s pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.
Product Features:
See More
Product Features:
- Designed to allow high flow rates and a consistent flow of oil to your engine
- Pleated synthetic-blend filtration media removes most harmful contaminants
- Fast and easy Wrench-Off removal using the welded one-inch hex nut
- High capacity to withstand the service intervals recommended by vehicle manufacturers
- Heavy-duty canister for outstanding durability
- Laboratory tested to ensure excellent capacity, efficiency, and mechanical strength
- Designed to operate with all synthetic, conventional, and blended motor oils
- 1-Year Limited Warranty
Most Popular 1968 Jeep Gladiator Performance Ignition Products
Customize your Jeep with 3 Performance Ignition Products products
like Performance Coils and
Performance Ignition Parts, all
priced under $204.99.
Mallory – Unilite Ignition Module (Part No.605)
from
$95.99
Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.
Product Features:
See More
Product Features:
- Service Part
- No Moving Parts To Wear Out
- Self Contained Unit
- Can Drive OEM
- Can Drive High Performance Ignition Coils
Mallory – Distributor Wiring Harness (Part No.29349)
Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)
from
$204.99
Universal street and strip. For street-driven vehicles with breaker point ignition or OE electronic ignition. Delivers optimum performance when used with these Mallory ignition products: UNILITE (R) distributor with a HYFIRE (R) capacitive discharge ignition, magnetic breaker less distributor with a HYFIRE (R) capacitive discharge ignition, or dual point distributor. Effective to approximately 6500 RPM when used with a point type distributor (depending on engine combination). Effective to approximately 8000 RPM when used with a Mallory HYFIRE electronic ignition control (depending on engine combination).
Product Features:
See More
Product Features:
- Glass Filled Polyester Case
- Longer Spark Duration
- Increased Performance
- No Energy Loss Due To Arcing
- Includes Brass Contact Terminal
Top Picks for 1968 Jeep Gladiator Performance Engines
Upgrade Jeep Gladiators with top-quality Performance Engines parts, including 8 OEM and aftermarket selections for your 1968 model.
Competition Cams – Xtreme 4X4 206/214 Hydraulic Flat Cam and Lifter Kit for AMC/Jeep 199-258/4.0L (Part No.CL68-231-4)
from
$559.99
Xtreme 4X4 206/214 Hydraulic Flat Cam and Lifter Kit for AMC/Jeep 199-258/4.0L
Competition Cams – Xtreme 4X4 210/218 Hydraulic Flat Cam for AMC/Jeep 199-258/4.0L (Part No.68-235-4)
from
$458.99
Xtreme 4X4 210/218 Hydraulic Flat Cam for AMC/Jeep 199-258/4.0L
Competition Cams – Xtreme 4X4 206/214 Hydraulic Flat Cam for AMC/Jeep 199-258/4.0L (Part No.68-231-4)
from
$426.99
Xtreme 4X4 206/214 Hydraulic Flat Cam for AMC/Jeep 199-258/4.0L
Competition Cams – Xtreme 4X4 218/226 Hydraulic Flat Cam for AMC/Jeep 199-258/4.0L (Part No.68-239-4)
from
$426.99
Xtreme 4X4 218/226 Hydraulic Flat Cam for AMC/Jeep 199-258/4.0L
Competition Cams – Hi-Tech 7.950" Long, .080" Wall, 5/16" Diameter Pushrod Set (Part No.7994-16)
from
$281.99
Hi-Tech 7.950" Long, .080" Wall, 5/16" Diameter Pushrod Set
Competition Cams – Engine Valve Spring Kit (Part No.940-16)
from
$111.99
Engine Valve Spring Kit
Competition Cams – Hi-Tech 7.950" Long, .080" Wall, 5/16" Diameter Pushrod (Part No.7994-1)
from
$16.99
Hi-Tech 7.950" Long, .080" Wall, 5/16" Diameter Pushrod
Competition Cams – Engine Valve Spring (Part No.940-1)
from
$12.99
Engine Valve Spring
In-Demand Performance Distributors for 1968 Jeep Gladiators
Select from 1 premium Performance Distributors parts for your 1968 Jeep Gladiator.
Mallory – Unilite Electronic Ignition Distributor Series 37 (Part No.3760001)
from
$614.99
The industry standard with adjustable mechanical advance curve. Triggered by photo-optic infrared LED system. Improved combustion efficiency and economy, increased spark plug life and cold weather starting, and maintenance free operation.
Product Features:
See More
Product Features:
- Improved Combustion And Economy
- Increased Spark Plug Life
- Improved Cold Weather Starting
- Maintenance Free Operation
- Accurate Spark Timing
- Self-Lubricating Bushings
- Years Of Trouble-Free Service
Most Sold 1968 Jeep Gladiator Performance Fuel Systems
Explore our best-selling Jeep parts for the 1968 Gladiator among 5 OEM and aftermarket options starting from $394.99.
Holley – Street Carburetor: 600 CFM, Electric Choke, 4 Barrel, Square Bore, Single Inlet, Shiny (Part No.0-80457S)
from
$509.99
Holley’s new 0-80457SA is constructed from aluminum which compared to its zinc counterpart equates to a weight savings of 40%! Holley’s aluminum 0-80457SA will hold its shine longer and also can be hand polished for a custom look! Its 600 CFM of airflow,
Product Features:
See More
Product Features:
- Vibratory Polished For Good Looks
Edelbrock – Performer 1405 Carburetor: 600 CFM, 4 Barrel, Square Bore, Manual Choke Inlet (Part No.1405)
from
$394.99
The Edelbrock 1405 Performer Series 600 CFM manual choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characteristics make the 1405 Performer Series 600 CFM manual choke carburetor an outstanding street performer. The first one is that metering rods are utilized to transition between circuits. The carburetor is unaffected by engine backfires, which means that there are no power valves to blow out, and the rods can be changed in seconds without carburetor removal or fuel draining. Secondly, the carburetor has the unique ability to “hold a tune”, so once it is tuned, the carburetor stay’s tuned. What this means to you is that compared to other carburetors, the performance remains consistent and the calibration stays unchanged. The lightweight all-aluminum body features a two-piece body that resists warping and is compatible with gasohol and blended fuels. The simple tub-type bowls and rear-pivot floats all contribute to a carburetor that’s reliable, user-friendly and is easily tunable for miles and miles of trouble-free operation.
Product Features:
See More
Product Features:
- Edelbrock products offer improved performance and aesthetics for a broad array of vehicles and engines. ‘Proven performance’ is the philosophy by which Edelbrock was founded and it continues to this day with the highest standards for performance and quali
- Manual Choke
- 4 Barrel Count
- Square Bore
- Smooth Secondary Transition
- Both Timed and Full Vacuum Ports
- Includes PCV Outlet
Holley – Prem Street Carbs (Avengers) (Part No.0-80770)
from
$716.99
Square flange bolt pattern. Performance calibrated. The ultimate vacuum secondary street performance upgrade.
Product Features:
See More
Product Features:
- Vibratory Polished For Good Looks
- Optimized Street Calibration That Works Out Of The Box
- Factory Preset Electric Choke For Easy Startups
- Quick Change Vacuum Housing Cap To Tune For Performance/Fuel Econ
- No Unnecessary Trips Back To The Parts Store
- Limited Lifetime Warranty
- 100% Wet Flow Tested By Holley Technicians
- Arrives Ready To Run
Holley – Street Carburetor: 670 CFM, Electric Choke, 4 Barrel, Square Bore, Dual Inlet, Shiny (Part No.0-80670)
from
$699.99
Square flange bolt pattern. Performance calibrated. The ultimate vacuum secondary street performance upgrade.
Product Features:
See More
Product Features:
- Vibratory Polished For Good Looks
- Optimized Street Calibration That Works Out Of The Box
- Factory Preset Electric Choke For Easy Startups
- Quick Change Vacuum Housing Cap To Tune For Performance/Fuel Econ
- No Unnecessary Trips Back To The Parts Store
- Limited Lifetime Warranty
- 100% Wet Flow Tested By Holley Technicians
- Arrives Ready To Run
Holley – Off Road Carbs (Part No.0-90670)
from
$819.99
The off-road truck avenger is designed specifically for off-road applications. The unique fuel metering block eliminates fuel spillover through the boosters at extreme angles allowing for 40 degree climbing, 30 degree side hill maneuvers and nose-down descents to avoid hesitations, stalling and flooding typically associated with carbs in an off road environment. The 470 CFM off-road truck avenger is the perfect carburetor for 4 cylinder, V-6, and inline 6 cylinder engines. Viton(R) is a registered trademark of DuPont Performance Elastomers.
Product Features:
See More
Product Features:
- Gold Dichromate Finish For Extreme Off Road Environments
- Single Feed Fuel Inlet For Ease Of Installation
- Optimized Off-Road Calibration That Works Out-Of-The-Box
- Factory Preset Electric Choke For Easy Startups
- Quick Change Vacuum Housing Cap To Tune For Performance/Fuel Econ
- One Piece Off-Road Vent Tube Eliminates Fuel Spillover
- Metering Block For Flood Free Op. 40 deg. Climb/30 deg. Side Hill
- Limited Lifetime Warranty Defects In Material/Workmanship
Top-Rated Performance and Racing Products Brands For Your 1968 Jeep Gladiator
Shop for the best-rated brands offering Performance and Racing Products and other products for your 1968 Jeep Gladiators. Below you’ll find some of our best rated Performance and Racing Products from Mallory, K&N, and Holley, and more. Performance and Racing Products from these brands that fit a 1968 Gladiator start at just $19.99 and are rated as high as 4.9 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.
Popular Mallory 1968 Jeep Gladiator Performance and Racing Products
When it comes to maintaining or upgrading your 1968 Jeep Gladiator, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. Mallory ticks all of those boxes. We offer a wide selection of Mallory Performance and Racing Products, specifically designed for the 1968 Jeep Gladiator. With over 1 Mallory brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $95.99. Plus, with over 3 customer reviews and an average rating of 4.9 stars, you can trust that our Mallory Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$95.99
(3)
Unilite Ignition Module
“I like the Unilite product because it is so small and compact compared to the HEI stuff I normally use. If you are restricted on space Its a great pro”
Popular K&N 1968 Jeep Gladiator Performance and Racing Products
K&N auto parts is one of the highest quality Performance and Racing Product brands in the market. Any 1968 Jeep Gladiator owner should feel confident when installing genuine K&N parts in their vehicle. To ensure the best fit and performance for your 1968 Gladiator, Advance Auto Parts carries a full inventory of 1 K&N Performance and Racing Products. Plus you will be keeping your Jeep in peak condition while saving money because prices on these K&N Performance and Racing Products range up to $19.99, plus, with more than 9 customer reviews and an impressive 4.8 stars average rating, you can be confident the Fram Performance and Racing Products below will deliver on both quality and value.
from
$19.99
(9)
Premium Oil Filter: Ideal for Synthetic, Conventional & Blended Oil, Protects Your Engine
“5 Star Review”
FAQs for 1968 Jeep Gladiator Performance and Racing Products
Which Performance and Racing Products are best-sellers for 1968 Jeep Gladiators?
Out of 20 Performance and Racing Products that fit 1968 Jeep Gladiators, the following parts are the top sellers:
- Performer 1405 Carburetor: 600 CFM, 4 Barrel, Square Bore, Manual Choke Inlet (5020654) – $394.99
- Thermocap Radiator Cap (10648773) – $55.99
- Unilite Ignition Module (17350025) – $95.99
What’s the price range for 1968 Jeep Gladiator Performance and Racing Products?
Performance and Racing Product prices for the 1968 Jeep Gladiator start at $12.99 and go up to $819.99 for the most premium parts.
What’s the average price of a Performance and Racing Product for a 1968 Jeep Gladiator?
The average price for Performance and Racing Products for the 1968 Jeep Gladiator is $287.94. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Performance and Racing Products for other Jeep Gladiator model years?
What are the cheapest Performance and Racing Products for my 1968 Jeep Gladiator?
The cheapest 1968 Jeep Gladiator Performance and Racing Products we carry in stock are:
- Engine Valve Spring (50286866) – $12.99
- Hi-Tech 7.950" Long, .080" Wall, 5/16" Diameter Pushrod (50289739) – $16.99
- Premium Oil Filter: Ideal for Synthetic, Conventional & Blended Oil, Protects Your Engine (6120011) – $19.99
- Distributor Wiring Harness (17350080) – $34.49
- Thermocap Radiator Cap (6900022) – $53.99
What are the top-rated Performance and Racing Products that fit the 1968 Jeep Gladiator?
Out of 132 reviews by customers, our 1968 Jeep Gladiator Performance and Racing Products have an average customer rating of . These are some of the highest-rated Performance and Racing Product types for the 1968 Jeep Gladiator and their top-rated products:
- Performance Fuel Systems
- Performer 1405 Carburetor: 600 CFM, 4 Barrel, Square Bore, Manual Choke Inlet (5020654) – $394.99
- Street Carburetor: 600 CFM, Electric Choke, 4 Barrel, Square Bore, Single Inlet, Shiny (6340008) – $509.99
- Prem Street Carbs (Avengers) (17120683) – $716.99
- Performance Radiators
- Performer 1405 Carburetor: 600 CFM, 4 Barrel, Square Bore, Manual Choke Inlet (5020654) – $394.99
- Street Carburetor: 600 CFM, Electric Choke, 4 Barrel, Square Bore, Single Inlet, Shiny (6340008) – $509.99
- Prem Street Carbs (Avengers) (17120683) – $716.99
- Performance Oil Filters
- Performer 1405 Carburetor: 600 CFM, 4 Barrel, Square Bore, Manual Choke Inlet (5020654) – $394.99
- Street Carburetor: 600 CFM, Electric Choke, 4 Barrel, Square Bore, Single Inlet, Shiny (6340008) – $509.99
- Prem Street Carbs (Avengers) (17120683) – $716.99
What types of Performance and Racing Products do you sell for my 1968 Jeep Gladiator?
As of 3/1/26, these are some of the most in-demand types of Performance and Racing Products for a 1968 Jeep Gladiator:
Can I get help with 1968 Jeep Gladiator Performance and Racing Product orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Jeep Performance and Racing Products and more.
What is your return policy for Jeep Gladiator Performance and Racing Products?
Advance Auto Parts keeps returns simple. For new Jeep Gladiator Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
