1968 GMC G25 Ignition Wires

Essential 1968 GMC G25 Ignition Wires

Accel – Universal Fit Super Stock 8mm Copper; Spark Plug Wire Set (Part No.4039B)

Universal Fit Super Stock 8mm Copper; Spark Plug Wire Set

from

$58.99
Performance upgrade for 7mm OE applications, silicone jacket with fiberglass braid EPDM insulation, tinned copper core, rated at 450 degrees Fahrenheit. Includes 8 blue extra-long wires, coil lead, silicone boots, zinc-plated steel terminals. Requires terminal and boot installation on distributor end.

Product Features:
  • Silicone Spark Plug Boots
  • 90 Degree Spark Plug Boot Angle
  • 450 Degree Wire Temperature Rating
  • Meets Or Exceeds OE Boot Temperature Rating
See More

Carquest Premium – Spark Plug Wire Set: 7 Wires, Increased performance, Designed for direct fit (Part No.35-6326)

Spark Plug Wire Set: 7 Wires, Increased performance, Designed for direct fit

from

$46.99
Product Features:
  • SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
  • Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
  • 100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
  • EPDM inner insulation stops power-robbing voltage leaks.
  • With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
  • Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
  • Excellent interference suppression and consistent performance
  • Easy lock terminals for more convenient installation.
  • Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
  • Broad coverage available for most vehicles on the road today
  • Include grease pack to ensure easy installation and removal
See More

Carquest Premium – Spark Plug Wire Set: 6 Wires, Increased performance, Designed for direct fit (Part No.35-6118)

Spark Plug Wire Set: 6 Wires, Increased performance, Designed for direct fit

from

$40.99
Product Features:
  • SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
  • Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
  • 100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
  • EPDM inner insulation stops power-robbing voltage leaks.
  • With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
  • Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
  • Excellent interference suppression and consistent performance
  • Easy lock terminals for more convenient installation.
  • Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
  • Broad coverage available for most vehicles on the road today
  • Include grease pack to ensure easy installation and removal
See More

NGK – NGK Wire Set (Part No.51398)

NGK Wire Set

from

$32.49
NGK ultra-low resistance mag core wire sets provide outstanding performance and durability. High-temp premium silicone outer jacket and inner EPDM/silicone insulation contain high voltage currents for excellent dielectric strength. Stainless steel winding

Product Features:
  • PERFECT FIT FOR YOUR VEHICLE: Built to OEM tolerances with OE quality or better materials
  • BUILT TO LAST: Outer Jacket built to withstand temperatures greater than 250 degrees C, inner insulation EPDM or silicone for best dielectric strength
  • STAINLESS STEEL TERMINALS: Provide the highest possible retention to ensure positive connections through the life of the set
  • CYLINDER LEAD ID: Cylinder lead identification tags where possible make installation easier
See More

MSD Ignition – Wire Set; Super Conductor; Small Block Chevy 350; HEI (Part No.31359)

Wire Set; Super Conductor; Small Block Chevy 350; HEI

from

$129.99
The MSD 8.5mm super conductor wire is the performance wire. Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference. In a single 12 inch length of super conductor wire there is only 40 – 50 ohms of resistance. That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it’s great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective electro magnetic interference (EMI) or choke. This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. Available in universal kits and bulk lengths.

Product Features:
  • Custom Fit For Make And Model Listed
  • Wires Are Pre-Cut To Exact Specifications
  • Bolt-on Performance
  • Conductor core features DuPont Kevlar material for increased tensile strength
  • Durable outer sleeve is a proprietary compound for resistance to high heat or abrasion
  • Stainless steel terminals feature dual crimp tabs to grip wire conductor and outer jacket separately
See More

NGK – NGK Wire Set (Part No.51340)

NGK Wire Set

from

$44.49
NGK ultra-low resistance mag core wire sets provide outstanding performance and durability. High-temp premium silicone outer jacket and inner EPDM/silicone insulation contain high voltage currents for excellent dielectric strength. Stainless steel winding

Product Features:
  • PERFECT FIT FOR YOUR VEHICLE: Built to OEM tolerances with OE quality or better materials
  • BUILT TO LAST: Outer Jacket built to withstand temperatures greater than 250 degrees C, inner insulation EPDM or silicone for best dielectric strength
  • STAINLESS STEEL TERMINALS: Provide the highest possible retention to ensure positive connections through the life of the set
  • CYLINDER LEAD ID: Cylinder lead identification tags where possible make installation easier
See More

MSD Ignition – Wire Set; Super Conductor; Big Block Chevy with HEI Tower Cap (Part No.35609)

Wire Set; Super Conductor; Big Block Chevy with HEI Tower Cap

from

$154.99
The MSD 8.5mm super conductor wire is the performance wire. Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference. In a single 12 inch length of super conductor wire there is only 40 – 50 ohms of resistance. That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it’s great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective electro magnetic interference (EMI) or choke. This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. Available in universal kits and bulk lengths.

Product Features:
  • Less than 50 ohms per foot for superior spark
  • Ferro-magnetic impregnated core creates an effective EMI choke
  • 40 ft. Of Conductor Wound Into A Single Foot Of Wire
  • For high EMI suppression
  • Conductor core features Dupont Kevlar material
  • Proprietary compound sleeves for resistance to high heat/abrasion
See More

Accel – GM Sb Hei 86-75 Over Vlv Cvr (Part No.9011C)

GM Sb Hei 86-75 Over Vlv Cvr

from

$181.99
ACCEL now offers the cure for burnt spark plug boots with Extreme 9000 Ceramic wire kits. The 8mm Ferro-Spiral core wire now has ceramic boots on the spark plug end of the wires. Ceramic boots withstand up to 2,000 degrees. Great for running headers with close tolerances, an engine bay with little room, or an RV with boots that melt because of heat. Ultra high temperature double silicone construction wire rated at 600 degrees fahrenheit peak. 500 ohms/ft Ferro-Spiral core developed for performance use. Excellent energy delivery to the spark plugs, while providing the highest level of RFI/EMI suppression. Stainless steel spark plug terminals for maximum spark energy to the plugs. Pre-made to factory lengths for a perfect fit.

Product Features:
  • Ceramic boots withstand up to 2,000░ Fahrenheit
  • Ceramic boots withstand up to 2,000° Fahrenheit
  • 8mm double silicone construction black wire rated at 600░ F rated
  • 8mm double silicone construction black wire rated at 600° F rated
  • 500 Ohms/foot ferro sprial core offers the highest level of RFI/EMI suppression
  • Universal and custom fit applications
  • Universal And Custom Fit Applications
See More

Carquest Premium – Spark Plug Wire Set: 9 Wires, Increased performance, Designed for direct fit (Part No.35-8139)

Spark Plug Wire Set: 9 Wires, Increased performance, Designed for direct fit

from

$40.99
Product Features:
  • SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
  • Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
  • 100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
  • EPDM inner insulation stops power-robbing voltage leaks.
  • With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
  • Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
  • Excellent interference suppression and consistent performance
  • Easy lock terminals for more convenient installation.
  • Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
  • Broad coverage available for most vehicles on the road today
  • Include grease pack to ensure easy installation and removal
See More

MSD Ignition – Wire Set; Super Conductor; 8-cyl. 90f Plug/90f Plug (Part No.31229)

Wire Set; Super Conductor; 8-cyl. 90f Plug/90f Plug

from

$129.99
Routing spark plug wires is an art form. It takes patience and time to route your wires away from the headers, through separators and to the distributor cap. Some wire sets fit perfect, but a lot of people want to build their own so they can route them exactly how they see fit. Our Universal spark plug wire sets come with the spark plug terminal and boot installed with the other end open. Distributor cap boots and terminals are included so you can cut the wire to the desired length, then install the terminal with the supplied Mini-Stripper-Crimper. It’s a little more work, but in the end it will be worth it.

Product Features:
  • Extra Long 8.5mm Wires So You Can Cut To Your Designed Length
  • Distributor Cap – Boots and Terminals Included
  • Incl. Mini-Stripper-Crimper
See More

PerTronix – 808311 Flame-Thrower Spark Plug Wires 8 cyl 8mm GM HEI Custom Fit Blue (Part No.808311)

808311 Flame-Thrower Spark Plug Wires 8 cyl 8mm GM HEI Custom Fit Blue

from

$72.99
8mm Custom fit MAGx2 wires are available for many popular applications equipped with Flame-Thrower or original GM HEI distributors. Our custom wire sets have factory terminated ends for a superior connection and perfect fit, without cuttting, crimping and

Product Features:
  • PerTronix 808311 Flame-Thrower Spark Plug Wires 8 cyl 8mm GM HEI Custom Fit Blue
  • Two current paths for reliability and redundancy. -Primary path: Spiral wound stainless steel alloy.-Secondary path: Carbon impregnated fiberglass center core.
See More

Mallory – Mallory Prosidewinder 135F Univ/Wire Set (Part No.947)

Mallory Prosidewinder 135F Univ/Wire Set

from

$153.99
Features at a glance, low 300 Ohm resistance spiral core delivers high energy output for maximum spark at the plug. Great RFI suppression meets the demands of today’s on-board electronics, such as electronic ignition, sound systems, and computer controls. 8MM ozone-resistant red silicone jacket repels water, oil, grease, and fuel, and withstands temperatures up to 500 degrees. Fits V8, universal wire kit: includes 45 degree spark plug boots, female socket (standard) distributor boots and terminals.

Product Features:
  • Most Advanced Wire By Mallory
  • RFI Suppression
  • High Temperature Silicone Jacket
  • Withstands Over 500+F
  • Come In Ready To Use Kits
  • Extra Long Kits
See More

Accel – 8Mm Super Stock Graphite Uni (Part No.4040B)

8Mm Super Stock Graphite Uni

from

$65.99
ACCEL’s SuperStock 4000 series spark plug wire sets are designed to upgrade an OE ignition system for high-spark delivery levels for street driven applications. The 450 degree F rated silicone jacket is extruded over a tightly woven, rugged fiberglass braid. The braid is applied over high dielectric strength EPDM (Ethylene Propylene Diene Monomer) inner insulation for ignition wire performance that exceeds SAE specifications.

Product Features:
  • 7mm And 8mm High Gloss Silicone Jacket
  • 450 F Rated Silicone Jacket
  • Stainless Steel Plug Terminals
  • RFI Suppression For Street Driven Applications
  • Custom-fit Universal And Import Coverage
  • High-strength Fiberglass Braid Construction
  • Pre And Post HEI Vehicles
See More

Accel – 7Mm Super Stock Copper Uni (Part No.3009)

7Mm Super Stock Copper Uni

from

$49.99
Upgrade for pre-HEI street applications, silicone jacket with fiberglass braid is rated at 450 degrees Fahrenheit, tinned copper core. Includes 8 blue extra-long wires, coil lead, silicone boots, zinc-plated steel terminals. Requires terminal and boot installation on distributor end of wires.

Product Features:
  • Suppression Core
  • Universal Fit
See More

MSD Ignition – Wire Set; Black Super Conductor; Small Block Chevy; Socket Cap (Part No.31653)

Wire Set; Black Super Conductor; Small Block Chevy; Socket Cap

from

$181.99
The MSD 8.5mm super conductor wire is the performance wire. Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference. In a single 12 inch length of super conductor wire there is only 40 – 50 ohms of resistance. That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it’s great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective electro magnetic interference (EMI) or choke. This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. Available in universal kits and bulk lengths.

Product Features:
  • Custom Fit For Make And Model Listed
  • Wires Are Pre-Cut To Exact Specifications
  • Bolt-on Performance
  • Conductor core features DuPont Kevlar material for increased tensile strength
  • Durable outer sleeve is a proprietary compound for resistance to high heat or abrasion
  • Stainless steel terminals feature dual crimp tabs to grip wire conductor and outer jacket separately
See More

Accel – Universal Fit Super Stock 8mm Suppression; Spark Plug Wire Set (Part No.4040)

Universal Fit Super Stock 8mm Suppression; Spark Plug Wire Set

from

$63.99
These ACCEL wire sets are a true performance upgrade replacement for OE types. Efficient delivery of spark energy for a good price. Silicone boots with black wire contain zinc-plated steel terminals. Noise suppression core. Set contains 8 plug wires with coil lead.

Product Features:
  • 7mm And 8mm High Gloss Silicone Jacket
  • 450° F Rated Silicone Jacket
  • Stainless Steel Plug Terminals
  • RFI Suppression For Street Driven Applications
  • Custom-fit Universal And Import Coverage
  • High-strength Fiberglass Braid Construction
See More

Mallory – Mallory Prosidewinder 90F Univ. Wire Set (Part No.937)

Mallory Prosidewinder 90F Univ. Wire Set

from

$133.99
Features at a glance, low 300 Ohm resistance spiral core delivers high energy output for maximum spark at the plug. Great RFI suppression meets the demands of today’s on-board electronics, such as electronic ignition, sound systems, and computer controls. 8MM ozone-resistant red silicone jacket repels water, oil, grease, and fuel, and withstands temperatures up to 500 degrees. Fits V8, universal wire kit: includes 45 degree spark plug boots, female socket (standard) distributor boots and terminals.

Product Features:
  • Most Advanced Wire By Mallory
  • RFI Suppression
  • High Temperature Silicone Jacket
  • Withstands Over 500+F
  • Come In Ready To Use Kits
  • Extra Long Kits
See More

PerTronix – 808317 Flame-Thrower Spark Plug Wires 8 cyl 8mm GM HEI Custom Fit Blue (Part No.808317)

808317 Flame-Thrower Spark Plug Wires 8 cyl 8mm GM HEI Custom Fit Blue

from

$67.99
8mm Custom fit MAGx2 wires are available for many popular applications equipped with Flame-Thrower or original GM HEI distributors. Our custom wire sets have factory terminated ends for a superior connection and perfect fit, without cuttting, crimping and

Product Features:
  • PerTronix 808317 Flame-Thrower Spark Plug Wires 8 cyl 8mm GM HEI Custom Fit Blue
  • Two current paths for reliability and redundancy. -Primary path: Spiral wound stainless steel alloy.-Secondary path: Carbon impregnated fiberglass center core.
See More

Accel – Universal Fit Super Stock 8mm Suppression; Spark Plug Wire Set (Part No.4040R)

Universal Fit Super Stock 8mm Suppression; Spark Plug Wire Set

from

$65.99
These ACCEL wire sets are a true performance upgrade replacement for OE types. Efficient delivery of spark energy for a good price. Silicone boots with black wire contain zinc-plated steel terminals. Noise suppression core. Set contains 8 plug wires with coil lead.

Product Features:
  • 7mm And 8mm High Gloss Silicone Jacket
  • 450° F Rated Silicone Jacket
  • Stainless Steel Plug Terminals
  • RFI Suppression For Street Driven Applications
  • Custom-fit Universal And Import Coverage
  • High-strength Fiberglass Braid Construction
  • Pre And Post HEI Vehicles
See More

Accel – 8Mm Super Stock Graphite Uni (Part No.4041)

8Mm Super Stock Graphite Uni

from

$63.99
ACCEL’s SuperStock 4000 series spark plug wire sets are designed to upgrade an OE ignition system for high-spark delivery levels for street driven applications. The 450 degree F rated silicone jacket is extruded over a tightly woven, rugged fiberglass braid. The braid is applied over high dielectric strength EPDM (Ethylene Propylene Diene Monomer) inner insulation for ignition wire performance that exceeds SAE specifications.

Product Features:
  • 7mm And 8mm High Gloss Silicone Jacket
  • 450 F Rated Silicone Jacket
  • Stainless Steel Plug Terminals
  • RFI Suppression For Street Driven Applications
  • Custom-fit Universal And Import Coverage
  • High-strength Fiberglass Braid Construction
  • Pre And Post HEI Vehicles
See More

PerTronix – 808415 Flame-Thrower Spark Plug Wires 8 cyl 8mm Universal 115 Degree Red (Part No.808415)

808415 Flame-Thrower Spark Plug Wires 8 cyl 8mm Universal 115 Degree Red

from

$81.99
8mm Custom fit MAGx2 wires are available for many popular applications equipped with Flame-Thrower or original GM HEI distributors. Our custom wire sets have factory terminated ends for a superior connection and perfect fit, without cuttting, crimping and

Product Features:
  • PerTronix 808415 Flame-Thrower Spark Plug Wires 8 cyl 8mm Universal 115 Degree Red
  • Two current paths for reliability and redundancy. -Primary path: Spiral wound stainless steel alloy.-Secondary path: Carbon impregnated fiberglass center core.
See More

PerTronix – 808412 Flame-Thrower Spark Plug Wires 8 cyl 8mm GM HEI Custom Fit Red (Part No.808412)

808412 Flame-Thrower Spark Plug Wires 8 cyl 8mm GM HEI Custom Fit Red

from

$72.99
8mm Custom fit MAGx2 wires are available for many popular applications equipped with Flame-Thrower or original GM HEI distributors. Our custom wire sets have factory terminated ends for a superior connection and perfect fit, without cuttting, crimping and

Product Features:
  • PerTronix 808412 Flame-Thrower Spark Plug Wires 8 cyl 8mm GM HEI Custom Fit Red
  • Two current paths for reliability and redundancy. -Primary path: Spiral wound stainless steel alloy.-Secondary path: Carbon impregnated fiberglass center core.
See More

Accel – Universal Fit Super Stock 8mm Spiral; Spark Plug Wire Set (Part No.5041B)

Universal Fit Super Stock 8mm Spiral; Spark Plug Wire Set

from

$89.99
The traditional ACCEL combination of yellow wire and red spark plug boots has been added to these Super Stock Spiral Core 5000 Series wire sets, which feature color-matched wire and spark plug boots in blue, black, and red. With only 500 ohms/ft. of resistance, more ignition energy can reach the spark plug, producing a longer-lasting, hotter spark flame kernel. The results is higher performance through improved efficiency, quicker throttle response, and reduced emissions. This 8mm wire’s double silicone construction is rated to 550 degrees F. The high-gloss wire jacket resists moisture, chemicals, and heat extremes for longer life and great looks. The fiberglass braid adds greater pull strength and terminal retention, while the stainless steel spark plug terminals provide excellent long life, electrical conductivity, and corrosion resistance. Both universal and custom-fit applications are available for early and late model cars and trucks.

Product Features:
  • Silicone Spark Plug Boots
  • 90 Degree Spark Plug Boot Angle
  • 450 Degree Wire Temperature Rating
  • Meets Or Exceeds OE Boot Temperature Rating
  • Meets or Exceeds OE Resistance
  • Cooper Core
  • 500 Ohms Resistance
See More

PerTronix – 808480 Flame-Thrower Spark Plug Wires 8 cyl 8mm Universal 180 Degree Red (Part No.808480)

808480 Flame-Thrower Spark Plug Wires 8 cyl 8mm Universal 180 Degree Red

from

$82.99
8mm Custom fit MAGx2 wires are available for many popular applications equipped with Flame-Thrower or original GM HEI distributors. Our custom wire sets have factory terminated ends for a superior connection and perfect fit, without cuttting, crimping and

Product Features:
  • PerTronix 808480 Flame-Thrower Spark Plug Wires 8 cyl 8mm Universal 180 Degree Red
  • Two current paths for reliability and redundancy. -Primary path: Spiral wound stainless steel alloy.-Secondary path: Carbon impregnated fiberglass center core.
See More

Accel – Universal Fit Graphite Suppression Spark Plug Wire Set (Part No.8021)

Universal Fit Graphite Suppression Spark Plug Wire Set

from

$115.99
These ACCEL carbon and graphite core wire sets virtually eliminate RFI noise, while providing maximum conductivity for ultimate performance in any race or street application. Double silicon insulation eliminates leakage and misfire.

Product Features:
  • 8.8mm Graphite Suppression
  • Silicone Spark Plug Boots
  • 550 Degree Double Silicone Construction
  • Fiberglass Braid
  • Carbon/Graphite Core
  • Magnetic Suppression
  • Fiberglass/Kevlar Core
  • 500 Ohms Resistance
See More

MSD Ignition – Wire Set; Super Conductor; Multi-Angle Plug; Socket/HEI (Part No.31179)

Wire Set; Super Conductor; Multi-Angle Plug; Socket/HEI

from

$143.99
Set includes terminals for engines with early type (socket) and late type (HEI spark plug top) distributor caps. 90 degree boots and terminals factory installed on one end.

Product Features:
  • Extra Long 8.5mm Wires So You Can Cut To Your Designed Length
  • Incl. both socket-style and spark plug-style boots and terminals
  • Includes Mini-Stripper-Crimper For Factory Style Crimps
  • Size Includes [6] 90 Deg. Boots/Terminals
  • Durable outer sleeve is a proprietary compound for resistance to high heat or abrasion
  • Stainless steel terminals feature dual crimp tabs to grip wire conductor and outer jacket separately
See More

Accel – 8Mm Super Stock Spiral Uni Bk (Part No.5041K)

8Mm Super Stock Spiral Uni Bk

from

$103.99
The traditional ACCEL combination of yellow wire and red spark plug boots has been added to these SuperStock Spiral Core 5000 Series wire sets, which feature color-matched wire and spark plug boots in blue, black, and red. With only 500 ohms/ft. of resistance, more ignition energy can reach the spark plug, producing a longer-lasting, hotter spark flame kernel. The results is higher performance through improved efficiency, quicker throttle response, and reduced emissions. This 8mm wire’s double silicone construction is rated to 550 degrees F. The high-gloss wire jacket resists moisture, chemicals, and heat extremes for longer life and great looks. The fiberglass braid adds greater pull strength and terminal retention, while the stainless steel spark plug terminals provide excellent long life, electrical conductivity, and corrosion resistance. Both universal and custom-fit applications are available for early and late model cars and trucks.

Product Features:
  • 500 Ohms/ft Of Resistance
  • 550 F Rated Silicone Jacket
  • Stainless Steel Plug Terminals
  • High RFI Suppression For Street And Strip Use
  • Universal And Import Coverage
  • High-strength Fiberglass Braid Construction
  • Pre And Post HEI Vehicles
  • 8mm High Gloss Silicone Jacket
See More

Accel – 8Mm Super Stock Graphite Uni (Part No.4041R)

8Mm Super Stock Graphite Uni

from

$63.29
ACCEL’s SuperStock 4000 series spark plug wire sets are designed to upgrade an OE ignition system for high-spark delivery levels for street driven applications. The 450 degree F rated silicone jacket is extruded over a tightly woven, rugged fiberglass braid. The braid is applied over high dielectric strength EPDM (Ethylene Propylene Diene Monomer) inner insulation for ignition wire performance that exceeds SAE specifications.

Product Features:
  • 7mm And 8mm High Gloss Silicone Jacket
  • 450 F Rated Silicone Jacket
  • Stainless Steel Plug Terminals
  • RFI Suppression For Street Driven Applications
  • Custom-fit Universal And Import Coverage
  • High-strength Fiberglass Braid Construction
  • Pre And Post HEI Vehicles
See More

1968 GMC G25 Ignition Wires

Maybe you’re in the middle of a full rebuild of that 1968 GMC G25. Maybe you just need a couple of Ignition Wires. Either way, Advance Auto Parts has 15 different Ignition Wires in our inventory ranging from $40.99 to $181.99. That means you can find the exact parts or products you need to keep that 1968 GMC G25 running smoothly.

Ignition Wires are only as good as their brand. We stock 5 different brands to make sure you have plenty of trusted parts to choose from for your 1968 GMC G25. Accel, Carquest Premium, and PerTronix are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Ignition Wires for your 1968 GMC G25, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 112 reviews in this category, some of the top rated parts include 7Mm Super Stock Copper Uni with 3.0 stars and Mallory Prosidewinder 135F Univ/Wire Set with 5.0 stars.

So if you’re in the market for aftermarket Ignition Wires to keep your 1968 GMC G25 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Ignition Wires Brands To Make Your 1968 GMC G25 Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1968 GMC G25 demands trusted brand parts and products to keep it running. Many trusted brands of Ignition Wires make up Advance Auto Parts’ inventory, and all are ready to help make your G25 the best it can be. Be sure to browse some of our top Ignition Wires brands and parts.

Popular MSD Ignition Ignition Wires

We carry MSD Ignition parts in our stock across Optional Spark Plug Wires categories, plus more. For a 1968 GMC G25, our most popular MSD Ignition Ignition Wires include:
Wire Set; Super Conductor; Multi-Angle Plug; Socket/HEI
from $143.99
(4)
Wire Set; Super Conductor; Multi-Angle Plug; Socket/HEI
Optional Spark Plug Wires

FAQs for 1968 GMC G25 Ignition Wires

What are the most purchased Ignition Wires for the 1968 GMC G25?

Out of 15 Ignition Wires for the 1968 GMC G25, the most popular in our inventory are:
808480 Flame-Thrower Spark Plug Wires 8 cyl 8mm Universal 180 Degree Red
from $82.99
This product is not rated
808480 Flame-Thrower Spark Plug Wires 8 cyl 8mm Universal 180 Degree Red
Optional Spark Plug Wires

What are the top-rated 1968 GMC G25 Ignition Wires?

Top-rated Ignition Wires for your 1968 GMC G25 based on customer reviews/ratings are:
7Mm Super Stock Copper Uni
from $49.99
(3)
7Mm Super Stock Copper Uni
“Got here right away”
Mallory Prosidewinder 135F Univ/Wire Set
from $153.99
(2)
Mallory Prosidewinder 135F Univ/Wire Set
“Very high quality product for my show car. My car is a 1940 Ford Tudor Deluxe with a 1942 style ‘crab’ distributor. It still has the original engine t”
Mallory Prosidewinder 90F Univ. Wire Set
from $133.99
(1)
Mallory Prosidewinder 90F Univ. Wire Set
“Good quality wires with low impedence. The Advance listing says to get part 669 if you have male terminal distributor cap. This is not needed – the ”