1968 Chevrolet Impala Fuel and Emissions Systems

Essential Fuel and Emissions Systems for 1968 Chevrolet Impalas

ACDelco – Air Pump Control Val (Part No.B6050486889ACD)

Air Pump Control Val

from

$360.09
Air Pump Control Val

ACDelco – Air Pump Control Val (Part No.B6050486891ACD)

Air Pump Control Val

from

$501.60
Air Pump Control Val

Delphi – Fuel Pump Module Assembly: With Float Arm, Seal, Splice Kit (Part No.FG0342)

Fuel Pump Module Assembly: With Float Arm, Seal, Splice Kit

from

$332.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.

Product Features:
  • Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
  • Empty float height and float retention matches OE specifications and guarantees correct gas gauge reading
  • Lower amperage draws less load on vehicle’s electrical system
  • Part is validated, tested and matched to the right vehicle application
  • Always be sure to check and clean fuel tank to avoid unnecessary returns
  • Lower failure rates due to its innovative design and durability
See More

Holley – Mechanical Fuel Pump (Part No.12-454-20)

Mechanical Fuel Pump

from

$212.99
Mechanical fuel pump made from heavy duty construction for continuous high RPM operation. Fuel body casting can be rotated to accommodate various plumbing situations. Fuel pressure regulator is not required.

Product Features:
  • High Output Fuel Flow
  • Flows 170 gph Free Flow
  • Shutoff Pressure Pre-Set At 8 PSI
  • Fuel Pressure Regulator Required
  • Heavy Duty Construction For Continuous High rpm Operation
  • Redesigned High Flow Valves Ensure Adequate Fuel Delivery
  • Fuel Body Casting Can Be Rotated For Plumbing Situations
  • 3/4in.-16 Inlet And Outlet Ports
  • Fittings Not Included
See More

Carquest Premium – Fuel Tank Lock Ring (Part No.LO1582931)

Fuel Tank Lock Ring

from

$16.99
Carquest Premium fuel pump tank seals are built by Carter Fuel Systems and Agility Auto Parts, industry leaders in high-quality fuel system components. Carquest Premium offers a complete line of fuel pump tank seals covering a wide variety of North American vehicle applications. Carquest Premium fuel pump tank seals are engineered to meet or exceed all OEM specifications.

Product Features:
  • Engineered to meet or exceed all OEM specifications.
  • Precision stamped and are treated with a rust proof finish to ensure durability and strength
See More

Dorman – Fuel Tank O-Ring (Part No.911-245)

Fuel Tank O-Ring

from

$39.99
This fuel pump tank seal is designed to match the fit and function of the original seal on specified vehicles, and is engineered for durability and reliable performance.

Product Features:
  • Direct replacement – this fuel pump tank seal is designed to match the fit and function of the original seal on specified vehicles.
  • Restores functionality – reliable replacement for an original part that has failed due to fatigue or due for replacement during fuel pump tank service.
  • Durable construction – recommended for replacement when the fuel pump or sensor is replaced
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

ARP Auto Racing – For Use With Chevy, Hex Style Head Type, Polished, Stainless Steel, With Washers (Part No.430-1602)

For Use With Chevy, Hex Style Head Type, Polished, Stainless Steel, With Washers

from

$10.99
Make sure that mechanical fuel pumps stay properly aligned by using ARP durable black oxide finished chrome moly or rust proof stainless bolts(both materials are rated at 170,000 PSI and considerably stronger than Grade 8 hardware). Your choice of either conventional hex heads or 12 point head. Washers are included.

Product Features:
  • Nominally Rated At 170,000 PSI Tensile Strength
  • Properly Aligned
  • Conventional Hex Heads
  • Rust-Proof Stainless Bolts
  • 170,000 PSI
See More

Edelbrock – EGR Valve Adapter #8035 For Chevy Small-Block Gen I (Part No.8035)

EGR Valve Adapter #8035 For Chevy Small-Block Gen I

from

$33.99


Product Features:
  • EGR Adapter
  • Clears OEM Intake
  • Includes Gaskets and Bolts
See More

Edelbrock – EGR Valve Adapter #1476 For Intake Manifold #3701 And #3706 (Part No.1476)

EGR Valve Adapter #1476 For Intake Manifold #3701 And #3706

from

$83.99


Product Features:
  • EGR Adapter
  • Clears OEM Intake
  • Includes Gaskets and Bolts
See More

Holley – Mechanical Fuel Pump Mounting Pad Cover (Part No.12-814)

Mechanical Fuel Pump Mounting Pad Cover

from

$24.49
Fuel pump mounting pad cover is used to cover the hole in the block when the mechanical fuel pump is removed to use an electric pump.

Product Features:
  • Cover Hole In Block When Mech. Fuel Pump Is Removed
See More

Edelbrock – Mechanical Fuel Pump Block-Off Plates for Big-Block Chevy (Part No.4020)

Mechanical Fuel Pump Block-Off Plates for Big-Block Chevy

from

$34.99
Edelbrock part #4020 is a mechanical fuel pump block off plate for small-block Chevy applications. It is a billet aluminum part with counter sunk bolt holes.

Product Features:
  • Black Anodized Finish
  • Billet Aluminum Material
  • Mounting Hardware Included
  • Includes 1.5 mm Gasket
  • For Small-Block Chevy
See More

Carquest Premium – Oxygen Sensor Connector (Part No.PTA1687)

Oxygen Sensor Connector

from

$47.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Carquest Premium – Engine Crankshaft Position Sensor Connector (Part No.PTA2455)

Engine Crankshaft Position Sensor Connector

from

$102.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – Fuel Tank Sending Unit FG110ACQ: Includes Wiring Harness (Part No.FG110ACQ)

Fuel Tank Sending Unit FG110ACQ: Includes Wiring Harness

from

$132.99
Carquest Premium fuel tank sending units are built to meet or exceed Original Equipment (O.E.) specifications for fit, form and function. Carquest Premium fuel tank sending units are supplied with the wiring harness and gaskets or seals when required for the application. All sending units are precision-tested ensuring accurate readings at any fuel level. Carquest Premium fuel tank sending units are engineered with superior quality components to provide the longest life and are backed up by an industry-leading warranty.

Product Features:
  • Meets or exceeds OE specifications for fit, form and function
  • All sending units are 100% performance tested
  • Includes installation gaskets or seals where applicable
See More

Dorman – Fuel Sending Unit Without Pump (Part No.692-235)

Fuel Sending Unit Without Pump

from

$62.99
This fuel tank sending unit is designed to match the fit and function of the original unit on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this fuel tank sending unit is designed to match the fit and function of the original unit on specified applications.
  • Restores functionality – reliable replacement for an original part that has failed due to internal sensor failure.
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Carquest Premium – Gas Cap: Twist On, Reduces Air Pollution, 1 Pack (Part No.10817)

Gas Cap: Twist On, Reduces Air Pollution, 1 Pack

from

$15.79
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:
  • Passes all state and federal emissions tests
  • Manufactured from durable, long-life materials
  • Reduces air pollution with proper sealing and venting
  • Independently tested for emission control
See More

Carquest Premium – Keyed Alike Locking Fuel Cap (Part No.17595)

Keyed Alike Locking Fuel Cap

from

$11.49
None

Product Features:
  • Reduces air pollution with proper sealing and venting
  • Manufactured from durable, long-life materials
  • Independently tested for emission control
  • Passes all state and federal emissions tests
  • Reduces air pollution with proper sealing and venting
See More

Dorman – Fuel Tank With Lock Ring And Seal (Part No.576-218)

Fuel Tank With Lock Ring And Seal

from

$364.99
This replacement fuel tank is precision-engineered to match the fit and function of the original fuel tank on specified vehicles.

Product Features:
  • Reliable replacement – this fuel tank directly replaces the original fuel tank on specified vehicle years, makes and models.
  • Durable construction – this fuel tank is made from the same rugged materials as the original part for dependable service.
  • Quality assured – this part has been validated to ensure a quality fit and long service life
  • Trustworthy design – backed by team of product specialists in the United States
See More

Spectra Premium – Fuel Tank (Part No.GM38A)

Fuel Tank

from

$327.99
Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium fuel tanks meet or exceed the performance of the original equipment they replace.

Product Features:
  • Unit is designed to OE fit, form and function requirements accomplished by leveraging our OE fuel system design expertise
  • Lock ring included with each tank to reduce installation time and to ensure a complete repair
  • Made with corrosion resistant, OE approved, Ni Terne steel for durability
  • Unit is leak tested after production to ensure product in free from fuel and / or evaporative leaks
  • Each new fuel tank is road tested to ensure real world performance and to verify that each design meets our high standards for quality
  • Engineered to stringent tolerances based on our Canadian engineers’ in-depth knowledge of the OE part it’s designed to replace
  • Fit tested on the very same vehicle application for which it was developed verifying first-hand that the design fits properly and can be easily installed
  • Packaged with double-layered foam wrap and heavy-gauge corrugated board to ensure product quality at installation
See More

ARP Auto Racing – Chrome Moly (Part No.134-8701)

Chrome Moly

from

$22.99
Stock fuel pump pushrods leave a lot to be desired. In fact, they have been known to break at the most inopportune time. To provide you with required reliability and improved performance, ARP has developed these sophisticated and durable pushrods. they are made from premium grade aerospace chrome moly and center less ground to precise diameter. A hollow core serves to reduce the reciprocating mass, which requires less energy to operate. The less drag on the motor, the more power available to you

Product Features:
  • Made From Premium Grade Aerospace Chrome Moly
  • Center Less Ground To Precise Diameter
  • Hollow Core Serves To Reduce The Reciprocating Mass, Which Requires Less Energy To Operate
  • Provide With Required Reliability And Improved Performance
See More

Competition Cams – FUEL PUMP PUSH ROD, CHEVY 1 EA (Part No.4607)

FUEL PUMP PUSH ROD, CHEVY 1 EA

from

$53.99
When a high pressure fuel pump is run with a steel roller cam core, the stock fuel pump pushrod is not compatible with the steel core. You can damage an expensive roller cam as a result of wear at the fuel pump lobe. COMP Cams offers several fuel pump pushrods for various applications.

Product Features:
  • Lightweight tubing with bronze tip for steel cams
  • 5.75″ Length
  • Eliminates wear at the fuel pump lobe often caused by a stock fuel pump pushrod
See More

Delphi – Fuel Tank Cleaning Kit (Part No.FC01)

Fuel Tank Cleaning Kit

from

$12.49
When replacing a fuel pump or module, it’s extremely important to clean the tank. Existing dirt, debris, and contamination stuck in the fuel tank can clog the brand-new strainer. Delphi’s Fuel Tank Cleaning Kit (FC01) and Tool (FC02) can help clean your fuel tank in less than five minutes. The FC01 includes a low-suds solution, cloth, and gloves that works together with the FC02 to help clean those hard to reach places without having to remove the fuel tank. Visit our Resource Center for helpful tips and tricks on fuel pumps, technologies, and more: https://www.delphiautoparts.com/usa/en-US/resource-center.

Product Features:
  • Helps avoid premature fuel pump failure
  • Lint free towel included
  • Low suds formulation
  • Removes harmful contaminants from the fuel tank
See More

Edelbrock – Fuel Injection Fuel Rail #3627, -6 AN Black Anodized For Chevrolet Small-Block (Part No.3627)

Fuel Injection Fuel Rail #3627, -6 AN Black Anodized For Chevrolet Small-Block

from

$211.99
All Edelbrock fuel rails are machined from high quality extruded aluminum. Each kit includes fuel rails, stands and mounting hardware. Fuel fittings, crossover line and regulator not included. 3627 Small-Block Chevy fuel rail kit is for use with Pro-Flo X

Product Features:
  • Black AnodizedFinish
  • High Capacity Fuel Rails
  • For Use W/ Pro-Flo XT Manifold #7137
  • -6 AN Inlet / Outlet
  • Made In The USA
See More

GM Genuine Parts – Fuel Tank Sending Unit Lock Ring (Part No.TR11)

Fuel Tank Sending Unit Lock Ring

from

$9.99
GM Genuine Parts Fuel Tank Lock Rings are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

Carquest Premium – Fuel Tank Lock Ring (Part No.LR3000)

Fuel Tank Lock Ring

from

$9.99
CARQUEST lock rings are designed to positively seat the fuel pump in proper position inside the tank. These precision stamped rings are made from corrosion-resistant and durable metals for long life.

Product Features:
  • Precision stamped for perfect fit and pump position
  • Always replace lock ring as a part of fuel pump service
See More

Dorman – Fuel Sending Unit Retainer Assortment (Part No.E3004425897DOR)

Fuel Sending Unit Retainer Assortment

from

$16.58
Recommended for replacement whenever the sending unit is serviced, Dorman’s Fuel Tank Sending Unit Lock Ring securely retains the fuel pump assembly to the lock. Its heavy-duty steel or plastic construction ensures a long life.

Product Features:
  • Comes with rubber seal or gasket
  • Direct replacement for a proper fit every time
  • Corrosion-resistant
  • Quality-tested for trouble-free performance
See More

Carquest Premium – Fuel Tank Lock Ring LO1582926 (Part No.LO1582926)

Fuel Tank Lock Ring LO1582926

from

$15.99
Carquest Premium offers a complete line of fuel tank lock rings covering a wide variety of North American vehicle applications. Carquest Premium fuel tank lock rings are engineered to meet or exceed all OEM specifications. Carquest Premium fuel tank lock rings are precision stamped and are treated with a rust proof finish to ensure durability and strength.

Product Features:
  • Engineered to meet or exceed all OEM specifications
  • Precision stamped and are treated with a rust proof finish to ensure durability and strength
See More

ACDelco – GM Original Equipment Fuel Tank Sending Unit Lock Ring (Part No.E2029575746ACD)

GM Original Equipment Fuel Tank Sending Unit Lock Ring

from

$24.90
ACDelco GM Original Equipment Fuel Tank Sending Unit Lock Rings are quality replacement parts for effectively sealing ACDelco GM OE Fuel Tank Sending Units. ACDelco GM OE Fuel Tank Sending Unit Lock Rings are a GM-recommended replacement for your vehicle’s original components. These original equipment lock rings are manufactured to fit your specific GM vehicle and will provide the same performance, durability, and service life as your factory original equipment.

Product Features:
  • GM-recommended replacement part for your GM vehicle’s original factory fuel tank sending unit lock ring
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

Upgrade your 1968 Chevrolet Impala with Top-Quality Fuel and Emissions Systems

When it comes to maintaining or upgrading your 1968 Chevrolet Impala, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Chevrolet or enhancing its overall performance, Fuel and Emissions Systems are key to keeping your Impala functioning at its best. At Advance Auto Parts, we offer a wide selection of 36 Fuel and Emissions Systems for the 1968 Chevrolet Impala, designed to meet your needs without breaking the bank. From Oxygen Sensor replacements to Exhaust Gas Recirculation (EGR) Parts upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Fuel and Emissions Systems for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Fuel and Emissions Systems for your 1968 Chevrolet Impala at great prices. Our Fuel and Emissions Systems inventory for this model ranges from just $8.49 to $347.99, with an average price of $82.41. Our 36 Fuel and Emissions Systems in stock come from 11 trusted brands, so you’re sure to find the right part for your 1968 Chevrolet Impala without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1968 Chevrolet Impala, we stock popular OEM and aftermarket Fuel and Emissions Systems from top names like Carquest Premium Mr. Gasket, and more. Carquest Premium Fuel and Emissions Systems start at just $10.49 and boast an impressive 4 stars average rating from customers. With 294 customer reviews and counting, our 1968 Chevrolet Impala Fuel and Emissions Systems have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Fuel and Emissions System upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1968 Chevrolet Impala is always ready to roll. We’re committed to providing you with everything you need to keep your Impala in top shape, all in one place. Start shopping confidently below for your 1968 Chevrolet Impala!

Best-Selling Oxygen Sensors for 1968 Chevrolet Impalas

Enhance the driving experience in your Chevrolet with 2 quality Oxygen Sensor components, starting at $65.99.

Flowtech – Reducer w/O2 Sensor Fitting (Part No.10105FLT)

Reducer w/O2 Sensor Fitting

from

$65.99


Product Features:
  • Reducer With O-Sensor Fitting
  • Made In USA
See More

Flowtech – Reducer w/O2 Sensor Fitting (Part No.10110FLT)

Reducer w/O2 Sensor Fitting

from

$65.99


Product Features:
  • Reducer With O-Sensor Fitting
  • Made In USA
See More

Most Popular 1968 Chevrolet Impala Exhaust Gas Recirculation (EGR) Parts

Customize your Chevrolet with 1 Exhaust Gas Recirculation (EGR) Parts products like EGR Valve Adapters, all priced under $83.99.

Edelbrock – EGR Valve Adapter #1476 For Intake Manifold #3701 And #3706 (Part No.1476)

EGR Valve Adapter #1476 For Intake Manifold #3701 And #3706

from

$83.99


Product Features:
  • EGR Adapter
  • Clears OEM Intake
  • Includes Gaskets and Bolts
See More

Top Picks for 1968 Chevrolet Impala Fuel Tanks

Upgrade Chevrolet Impalas with top-quality Fuel Tanks parts, including 8 OEM and aftermarket selections for your 1968 model.

Spectra Premium – Fuel Tank Sending Unit (Part No.FG105A)

Fuel Tank Sending Unit

from

$106.99
Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium fuel sending units meet or exceed the performance of the original equipment they replace.

Product Features:
  • Unit is designed to OE fit, form and function requirements accomplished by leveraging our OE fuel system design expertise
  • Precision tested fuel level sensors ensures vehicles fuel gage will provide an accurate reading at any fuel level
  • Includes strainers for smoother installation process and ensures a clean fuel system upon replacement
  • Engineered to stringent tolerances based on our Canadian engineers’ in-depth knowledge of the OE part it’s designed to replace
  • Manufactured with high quality material, ensuring the durability of this part to prevent costly repairs
See More

Spectra Premium – Fuel Tank (Part No.GM38A)

Fuel Tank

from

$327.99
Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium fuel tanks meet or exceed the performance of the original equipment they replace.

Product Features:
  • Unit is designed to OE fit, form and function requirements accomplished by leveraging our OE fuel system design expertise
  • Lock ring included with each tank to reduce installation time and to ensure a complete repair
  • Made with corrosion resistant, OE approved, Ni Terne steel for durability
  • Unit is leak tested after production to ensure product in free from fuel and / or evaporative leaks
  • Each new fuel tank is road tested to ensure real world performance and to verify that each design meets our high standards for quality
  • Engineered to stringent tolerances based on our Canadian engineers’ in-depth knowledge of the OE part it’s designed to replace
  • Fit tested on the very same vehicle application for which it was developed verifying first-hand that the design fits properly and can be easily installed
  • Packaged with double-layered foam wrap and heavy-gauge corrugated board to ensure product quality at installation
See More

Delphi – Fuel Tank Cleaning Kit (Part No.FC01)

Fuel Tank Cleaning Kit

from

$12.49
When replacing a fuel pump or module, it’s extremely important to clean the tank. Existing dirt, debris, and contamination stuck in the fuel tank can clog the brand-new strainer. Delphi’s Fuel Tank Cleaning Kit (FC01) and Tool (FC02) can help clean your fuel tank in less than five minutes. The FC01 includes a low-suds solution, cloth, and gloves that works together with the FC02 to help clean those hard to reach places without having to remove the fuel tank. Visit our Resource Center for helpful tips and tricks on fuel pumps, technologies, and more: https://www.delphiautoparts.com/usa/en-US/resource-center.

Product Features:
  • Helps avoid premature fuel pump failure
  • Lint free towel included
  • Low suds formulation
  • Removes harmful contaminants from the fuel tank
See More

Carquest Premium – Fuel Tank Lock Ring (Part No.LO1582931)

Fuel Tank Lock Ring

from

$16.99
Carquest Premium fuel pump tank seals are built by Carter Fuel Systems and Agility Auto Parts, industry leaders in high-quality fuel system components. Carquest Premium offers a complete line of fuel pump tank seals covering a wide variety of North American vehicle applications. Carquest Premium fuel pump tank seals are engineered to meet or exceed all OEM specifications.

Product Features:
  • Engineered to meet or exceed all OEM specifications.
  • Precision stamped and are treated with a rust proof finish to ensure durability and strength
See More

KAI – Fuel Tank Lock Ring (Part No.SPILO01)

Fuel Tank Lock Ring

from

$10.99
New Standard Replacement Fuel Tank Lock Ring, Includes O-Ring

Product Features:
  • Includes O-Ring
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Dorman – Fuel Sending Unit Without Pump (Part No.692-123)

Fuel Sending Unit Without Pump

from

$92.99
This fuel tank sending unit is designed to match the fit and function of the original unit on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this fuel tank sending unit is designed to match the fit and function of the original unit on specified applications.
  • Restores functionality – reliable replacement for an original part that has failed due to internal sensor failure.
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Spectra Premium – Fuel Tank (Part No.GM53A)

Fuel Tank

from

$347.99
Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium fuel tanks meet or exceed the performance of the original equipment they replace.

Product Features:
  • Unit is designed to OE fit, form and function requirements accomplished by leveraging our OE fuel system design expertise
  • Lock ring included with each tank to reduce installation time and to ensure a complete repair
  • Made with corrosion resistant, OE approved, Ni Terne steel for durability
  • Unit is leak tested after production to ensure product in free from fuel and / or evaporative leaks
  • Each new fuel tank is road tested to ensure real world performance and to verify that each design meets our high standards for quality
  • Engineered to stringent tolerances based on our Canadian engineers’ in-depth knowledge of the OE part it’s designed to replace
  • Fit tested on the very same vehicle application for which it was developed verifying first-hand that the design fits properly and can be easily installed
  • Packaged with double-layered foam wrap and heavy-gauge corrugated board to ensure product quality at installation
See More

Carquest Premium – Fuel Tank Sending Unit FG105ACQ: Includes Wiring Harness (Part No.FG105ACQ)

Fuel Tank Sending Unit FG105ACQ: Includes Wiring Harness

from

$112.99
Carquest Premium fuel tank sending units are built to meet or exceed Original Equipment (O.E.) specifications for fit, form and function. Carquest Premium fuel tank sending units are supplied with the wiring harness and gaskets or seals when required for the application. All sending units are precision-tested ensuring accurate readings at any fuel level. Carquest Premium fuel tank sending units are engineered with superior quality components to provide the longest life and are backed up by an industry-leading warranty.

Product Features:
  • Meets or exceeds OE specifications for fit, form and function
  • All sending units are 100% performance tested
  • Includes installation gaskets or seals where applicable
See More

In-Demand Gas Caps for 1968 Chevrolet Impalas

Select from 2 premium Gas Caps parts for your 1968 Chevrolet Impala, with prices ranging from $10.49 to $22.99.

Carquest Premium – Fuel Cap: 10632, Twist-Lock, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10632)

Fuel Cap: 10632, Twist-Lock, Direct Fit, Provides Tight Seal, 1 Pack

from

$10.49
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:
  • Passes all state and federal emissions tests
  • Manufactured from durable, long-life materials
  • Reduces air pollution with proper sealing and venting
  • Independently tested for emission control
See More

Carquest Premium – Locking Fuel Cap: 10571, Push In, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10571)

Locking Fuel Cap: 10571, Push In, Direct Fit, Provides Tight Seal, 1 Pack

from

$22.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:
  • Protects your fuel from theft and vandalism
  • Passes all state and federal emissions tests
  • Manufactured from durable, long-life materials
  • Reduces air pollution with proper sealing and venting
  • Independently tested for emission control
See More

Most Sold 1968 Chevrolet Impala Fuel Pumps

Explore our best-selling Chevrolet parts for the 1968 Impala among 20 OEM and aftermarket options starting from $10.99.

Dorman – Help – Fuel Pump Push Rod (Part No.03875)

Fuel Pump Push Rod

from

$15.29
Our Fuel Pump Push Rod is constructed from high-quality materials for a long service life. Replacement helps restore the fuel pump to proper operation so that your vehicle runs smoothly.

Product Features:
  • Direct replacement – this fuel pump push rod is designed to match the fit and function of the original rod on specified vehicles.
  • Ideal solution – this rod is a reliable replacement for an original part that has failed
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Carquest Premium – Mechanical Fuel Pump (Part No.1541134)

Mechanical Fuel Pump

from

$27.99
Carquest Premium mechanical fuel pumps are engineered by Carter Fuel Systems or Agility Auto Parts to meet or exceed Original Equipment (OE) specifications for fit, form and function. Every mechanical fuel pump is 100% tested throughout the entire manufacturing process for worry-free performance. Carquest Premium mechanical fuel pumps include the installation gaskets needed for each application. Carquest Premium mechanical fuel pumps are engineered with superior quality components to provide the longest life and reliable performance.

Product Features:
  • Meets or exceeds OE specifications for fit, form and function.
  • Special heat-treated rocker arms and case-hardened pins to ensure lasting performance.
  • All fuel pumps are 100% performance tested.
  • Includes installation gaskets or seals where applicable.
See More

Edelbrock – Performer RPM Series fuel pump for SBC and W Series Chevy (Part No.1721)

Performer RPM Series fuel pump for SBC and W Series Chevy

from

$168.99


Product Features:
  • Unique Valve Design
  • Improves Flow Quantity/Quality
  • Supports Engines Up To 550 HP
  • Hi-Vol 0.375 in. NPT Inlet/Outlet
  • Produces 6 psi
  • Gasoline Or Mixed Fuels Only
See More

Mr. Gasket – Electric Fuel Pump (Part No.12S)

Electric Fuel Pump

from

$64.99
Gravity fed type pump with simple two-wire design. Works on 12 Volt negative ground systems only. Includes fittings and mounting hardware along with easy to follow DIY instructions. Pumps require approximately one amp average draw at maximum delivery. Flows 35 GPH (gallons per hours at 4-7 PSI (pounds per square inch). Universal design for most domestic 4, 6, & 8-cylinder carburetor applications.

Product Features:
  • Solid-state Worry Free Electronics
  • Internal Pressure Regulating
  • Universal Design Allows For Easy Installation
  • No DiaphraGMs Or Mechanical Parts To Wear Out
  • They Make An Excellent Fuel Transfer or Booster Pump
  • Not designed for use on aircraft of any type.
  • Hose Barbs Fit 5/16″ Fuel Hose
  • Self-priming, 2 wire design
  • Eliminates vapor lock and flooding
See More

Mr. Gasket – Fuel Pump Block-Off Plate (Part No.1516)

Fuel Pump Block-Off Plate

from

$12.99
Precision cut to cover stock fuel pump opening when converting to an electric fuel pump. Gasket included.

Product Features:
  • Chrome Plated Steel
  • Comes With Gasket
  • Easy Installation
See More

Carquest Premium – Fuel Pump Hanger Assembly: Fuel Pump and Strainer (Part No.160572)

Fuel Pump Hanger Assembly: Fuel Pump and Strainer

from

$23.99
Carquest Premium mechanical fuel pumps are engineered by Carter Fuel Systems or Agility Auto Parts to meet or exceed Original Equipment (OE) specifications for fit, form and function. Every mechanical fuel pump is 100% tested throughout the entire manufacturing process for worry-free performance. Carquest Premium mechanical fuel pumps include the installation gaskets needed for each application. Carquest Premium mechanical fuel pumps are engineered with superior quality components to provide the longest life and reliable performance

Product Features:
  • Meets or exceeds OE specifications for fit, form and function
  • Special heat-treated rocker arms and case-hardened pins to ensure lasting performance
  • All fuel pumps are 100% performance tested
  • Includes installation gaskets or seals where applicable
See More

Carquest Premium – Mechanical Fuel Pump 1541126: Includes Gasket (Part No.1541126)

Mechanical Fuel Pump 1541126: Includes Gasket

from

$32.99
Carquest Premium mechanical fuel pumps are engineered by Carter Fuel Systems or Agility Auto Parts to meet or exceed Original Equipment (OE) specifications for fit, form and function. Every mechanical fuel pump is 100% tested throughout the entire manufacturing process for worry-free performance. Carquest Premium mechanical fuel pumps include the installation gaskets needed for each application. Carquest Premium mechanical fuel pumps are engineered with superior quality components to provide the longest life and reliable performance

Product Features:
  • Meets or exceeds OE specifications for fit, form and function
  • Special heat-treated rocker arms and case-hardened pins to ensure lasting performance
  • All fuel pumps are 100% performance tested
  • Includes installation gaskets or seals where applicable
See More

Carquest Premium – Mechanical Fuel Pump Includes Gasket (Part No.1542665)

Mechanical Fuel Pump Includes Gasket

from

$31.99
Carquest Premium mechanical fuel pumps are engineered by Carter Fuel Systems or Agility Auto Parts to meet or exceed Original Equipment (OE) specifications for fit, form and function. Every mechanical fuel pump is 100% tested throughout the entire manufacturing process for worry-free performance. Carquest Premium mechanical fuel pumps include the installation gaskets needed for each application. Carquest Premium mechanical fuel pumps are engineered with superior quality components to provide the longest life and reliable performance

Product Features:
  • Meets or exceeds OE specifications for fit, form and function
  • Special heat-treated rocker arms and case-hardened pins to ensure lasting performance
  • All fuel pumps are 100% performance tested
  • Includes installation gaskets or seals where applicable
See More

ARP Auto Racing – For Use With Chevy, Hex Style Head Type, Polished, Stainless Steel, With Washers (Part No.430-1602)

For Use With Chevy, Hex Style Head Type, Polished, Stainless Steel, With Washers

from

$10.99
Make sure that mechanical fuel pumps stay properly aligned by using ARP durable black oxide finished chrome moly or rust proof stainless bolts(both materials are rated at 170,000 PSI and considerably stronger than Grade 8 hardware). Your choice of either conventional hex heads or 12 point head. Washers are included.

Product Features:
  • Nominally Rated At 170,000 PSI Tensile Strength
  • Properly Aligned
  • Conventional Hex Heads
  • Rust-Proof Stainless Bolts
  • 170,000 PSI
See More

Holley – Mechanical Fuel Pump (Part No.12-454-20)

Mechanical Fuel Pump

from

$212.99
Mechanical fuel pump made from heavy duty construction for continuous high RPM operation. Fuel body casting can be rotated to accommodate various plumbing situations. Fuel pressure regulator is not required.

Product Features:
  • High Output Fuel Flow
  • Flows 170 gph Free Flow
  • Shutoff Pressure Pre-Set At 8 PSI
  • Fuel Pressure Regulator Required
  • Heavy Duty Construction For Continuous High rpm Operation
  • Redesigned High Flow Valves Ensure Adequate Fuel Delivery
  • Fuel Body Casting Can Be Rotated For Plumbing Situations
  • 3/4in.-16 Inlet And Outlet Ports
  • Fittings Not Included
See More

Holley – Mechanical Fuel Pump (Part No.12-835)

Mechanical Fuel Pump

from

$124.99
Mechanical fuel pump made from heavy duty construction for continuous high RPM operation. Fuel body casting can be rotated to accommodate various plumbing situations. Fuel pressure regulator is not required.

Product Features:
  • Street Performance
  • Flows 80 gph Free Flow
  • Shutoff Pressure Pre-Set 7.5 PSI
  • Fuel Pressure Regulator Is Not Required
  • Heavy Duty Construction For Continuous High rpm Operation
  • Fuel Body Casting Can Be Rotated For Plumbing Situations
  • Inlet And Outlet Tapped For 1/4 in. NPT
See More

Edelbrock – Victor Series fuel pump is for Big-Block Chevrolet (Part No.1712)

Victor Series fuel pump is for Big-Block Chevrolet

from

$185.99
Edelbrock part #1712 Victor Series fuel pump is for Big-Block Chevrolet. The Edelbrock Victor Series fuel pump is a must for drag racing, circle track racing, street machines or any application that demands a high-volume fuel delivery, these fuel pumps fe

Product Features:
  • Hi-Vol 0.5 in. NPT Inlet/Outlet
  • Large Alcohol-Proof Diaphragm
  • Aircraft-Type Allen Bolts
  • Produces 10 psi
  • For Gasoline Only
  • Finest Quality Material
  • Beautifully Detailed
  • Use w/Fuel Pressure Regulator PN[8190]
See More

Edelbrock – Victor Series fuel pump is for SBC and W Series Chevrolet (Part No.1711)

Victor Series fuel pump is for SBC and W Series Chevrolet

from

$174.99
High volume 0.5 inch NPT inlet and outlet. Large alcohol-proof diaphragm. Aircraft-type Allen bolts. Produces 10 psi. For gasoline only. Finest quality material. Beautifully detailed. Use with fuel pressure regulator PN(8190).

Product Features:
  • Hi-Vol 0.5 in. NPT Inlet/Outlet
  • Large Alcohol-Proof Diaphragm
  • Aircraft-Type Allen Bolts
  • Produces 10 psi
  • For Gasoline Only
  • Finest Quality Material
  • Beautifully Detailed
  • Use w/Fuel Pressure Regulator PN[8190]
See More

KAI – Fuel Pump Module Assembly (Part No.FMD010083)

Fuel Pump Module Assembly

from

$62.99
New Platinum Pro Fuel Pump Module

Product Features:
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Competition Cams – FUEL PUMP PUSH ROD, CHEVY 1 EA (Part No.4607)

FUEL PUMP PUSH ROD, CHEVY 1 EA

from

$53.99
When a high pressure fuel pump is run with a steel roller cam core, the stock fuel pump pushrod is not compatible with the steel core. You can damage an expensive roller cam as a result of wear at the fuel pump lobe. COMP Cams offers several fuel pump pushrods for various applications.

Product Features:
  • Lightweight tubing with bronze tip for steel cams
  • 5.75″ Length
  • Eliminates wear at the fuel pump lobe often caused by a stock fuel pump pushrod
See More

Carquest Premium – Mechanical Fuel Pump 1542664: Includes Gasket (Part No.1542664)

Mechanical Fuel Pump 1542664: Includes Gasket

from

$36.49
Carquest Premium mechanical fuel pumps are engineered by Carter Fuel Systems or Agility Auto Parts to meet or exceed Original Equipment (OE) specifications for fit, form and function. Every mechanical fuel pump is 100% tested throughout the entire manufacturing process for worry-free performance. Carquest Premium mechanical fuel pumps include the installation gaskets needed for each application. Carquest Premium mechanical fuel pumps are engineered with superior quality components to provide the longest life and reliable performance

Product Features:
  • Meets or exceeds OE specifications for fit, form and function
  • Special heat-treated rocker arms and case-hardened pins to ensure lasting performance
  • All fuel pumps are 100% performance tested
  • Includes installation gaskets or seals where applicable
See More

Edelbrock – Mechanical Fuel Pump Block-Off Plates for Big-Block Chevy (Part No.4020)

Mechanical Fuel Pump Block-Off Plates for Big-Block Chevy

from

$34.99
Edelbrock part #4020 is a mechanical fuel pump block off plate for small-block Chevy applications. It is a billet aluminum part with counter sunk bolt holes.

Product Features:
  • Black Anodized Finish
  • Billet Aluminum Material
  • Mounting Hardware Included
  • Includes 1.5 mm Gasket
  • For Small-Block Chevy
See More

Carquest Premium – Mechanical Fuel Pump SP1021MPCQ (Part No.SP1021MPCQ)

Mechanical Fuel Pump SP1021MPCQ

from

$31.99
Carquest Premium mechanical fuel pumps are built to meet or exceed Original Equipment (OE) specifications for fit, form and function. Every mechanical fuel pump is 100% tested throughout the entire manufacturing process for worry-free performance. Carquest Premium mechanical fuel pumps include the installation gaskets needed for each application. Carquest Premium mechanical fuel pumps are engineered with superior quality components to provide the longest life and reliable performance.

Product Features:
  • Meets or exceeds OE specifications for fit, form and function
  • Special heat-treated rocker arms and case-hardened pins to ensure lasting performance
  • All fuel pumps are 100% performance tested
  • Includes installation gaskets or seals where applicable
See More

Holley – Mechanical Fuel Pump Mounting Pad Cover (Part No.12-814)

Mechanical Fuel Pump Mounting Pad Cover

from

$24.49
Fuel pump mounting pad cover is used to cover the hole in the block when the mechanical fuel pump is removed to use an electric pump.

Product Features:
  • Cover Hole In Block When Mech. Fuel Pump Is Removed
See More

ARP Auto Racing – Chrome Moly (Part No.134-8701)

Chrome Moly

from

$22.99
Stock fuel pump pushrods leave a lot to be desired. In fact, they have been known to break at the most inopportune time. To provide you with required reliability and improved performance, ARP has developed these sophisticated and durable pushrods. they are made from premium grade aerospace chrome moly and center less ground to precise diameter. A hollow core serves to reduce the reciprocating mass, which requires less energy to operate. The less drag on the motor, the more power available to you

Product Features:
  • Made From Premium Grade Aerospace Chrome Moly
  • Center Less Ground To Precise Diameter
  • Hollow Core Serves To Reduce The Reciprocating Mass, Which Requires Less Energy To Operate
  • Provide With Required Reliability And Improved Performance
See More

Top-Rated Fuel and Emissions Systems Brands For Your 1968 Chevrolet Impala

Shop for the best-rated brands offering Fuel and Emissions Systems and other products for your 1968 Chevrolet Impalas. Below you’ll find some of our best rated Fuel and Emissions Systems from Carquest Premium and Mr. Gasket, and more. Fuel and Emissions Systems from these brands that fit a 1968 Impala start at just $10.49 and are rated as high as 4 stars. OEM and aftermarket Fuel and Emissions Systems don’t get more top quality, durable, and affordable than from the brands below.

Popular Carquest Premium 1968 Chevrolet Impala Fuel and Emissions Systems

When it comes to maintaining or upgrading your 1968 Chevrolet Impala, using quality Fuel and Emissions Systems is essential to ensure durability and a perfect fit. Carquest Premium ticks all of those boxes. We offer a wide selection of Carquest Premium Fuel and Emissions Systems, specifically designed for the 1968 Chevrolet Impala. With over 11 Carquest Premium brand Fuel and Emissions Systems in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $10.49, with an average price of just $35.35. Plus, with over 8 customer reviews and an average rating of 4 stars, you can trust that our Carquest Premium Fuel and Emissions Systems will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

Mechanical Fuel Pump 1541126: Includes Gasket
from
$32.99
This product is not rated

Mechanical Fuel Pump 1541126: Includes Gasket

“”

Fuel Pump Hanger Assembly: Fuel Pump and Strainer
from
$23.99
This product is not rated

Fuel Pump Hanger Assembly: Fuel Pump and Strainer

“”

Fuel Tank Lock Ring
from
$16.99
This product is not rated

Fuel Tank Lock Ring

“”

Popular Mr. Gasket 1968 Chevrolet Impala Fuel and Emissions Systems

Mr. Gasket auto parts is one of the highest quality Fuel and Emissions System brands in the market. Any 1968 Chevrolet Impala owner should feel confident when installing genuine Mr. Gasket parts in their vehicle. To ensure the best fit and performance for your 1968 Impala, Advance Auto Parts carries a full inventory of 2 Mr. Gasket Fuel and Emissions Systems. Plus you will be keeping your Chevrolet in peak condition while saving money because prices on these Mr. Gasket Fuel and Emissions Systems range from $12.99 to $64.99, plus, with more than 39 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Fuel and Emissions Systems below will deliver on both quality and value.

Fuel Pump Block-Off Plate
from
$12.99

(2)

Fuel Pump Block-Off Plate

“This is a block off plate for Ford motors. FE series, 385 series, my dad’s 390, my 351m and my 460 use this shape.”

Electric Fuel Pump
from
$64.99

(37)

Electric Fuel Pump

“It works as advertised.”

FAQs for 1968 Chevrolet Impala Fuel and Emissions Systems

Which Fuel and Emissions Systems are best-sellers for 1968 Chevrolet Impalas?

Out of 36 Fuel and Emissions Systems that fit 1968 Chevrolet Impalas, the following parts are the top sellers:

What’s the price range for 1968 Chevrolet Impala Fuel and Emissions Systems?

Fuel and Emissions System prices for the 1968 Chevrolet Impala start at $8.49 and go up to $347.99 for the most premium parts.

What’s the average price of a Fuel and Emissions System for a 1968 Chevrolet Impala?

The average price for Fuel and Emissions Systems for the 1968 Chevrolet Impala is $82.41. Keep in mind the variety of part types within our Fuel and Emissions System category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Fuel and Emissions Systems for other Chevrolet Impala model years?

Yes, we currently carry Fuel and Emissions Systems for 51 model years of Chevrolet Impalas between 1958 and 2020. Fuel and Emissions Systems are bought most frequently for the following model years: 2020, 2019, 2018, 2017, 2016, 2015, 2014, 2013, and 2012.

What are the cheapest Fuel and Emissions Systems for my 1968 Chevrolet Impala?

The cheapest 1968 Chevrolet Impala Fuel and Emissions Systems we carry in stock are:

What are the top-rated Fuel and Emissions Systems that fit the 1968 Chevrolet Impala?

Out of 294 reviews by customers, our 1968 Chevrolet Impala Fuel and Emissions Systems have an average customer rating of . These are some of the highest-rated Fuel and Emissions System types for the 1968 Chevrolet Impala and their top-rated products:

What types of Fuel and Emissions Systems do you sell for my 1968 Chevrolet Impala?

As of 2/5/25, these are some of the most in-demand types of Fuel and Emissions Systems for a 1968 Chevrolet Impala:

Can I get help with 1968 Chevrolet Impala Fuel and Emissions System orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Chevrolet Fuel and Emissions Systems and more.

What is your return policy for Chevrolet Impala Fuel and Emissions Systems?

Advance Auto Parts keeps returns simple. For new Chevrolet Impala Fuel and Emissions Systems and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.