1968 Chevrolet Camaro Fuel and Emissions Systems
Find Your Specific 1968 Chevrolet Camaro Fuel and Emissions Systems
Below you will find various in-demand Chevrolet Fuel and Emissions Systems, components and accessories for your 1968 Camaro. Advance Auto Parts has popular Camaro parts like Oxygen Sensors, Exhaust Gas Recirculation (EGR) Parts, Fuel Tanks and more. You’ll also find aftermarket and OEM Fuel and Emissions Systems for other Camaro model years including
2015,
2016,
2017,
2018,
2019,
2020,
2021,
2022,
2023 and more. Select a category of 1968 Chevrolet Camaro Fuel and Emissions Systems below and start saving instantly.
Popular 1968 Chevrolet Camaro Fuel and Emissions Systems Categories
Essential Fuel and Emissions Systems for 1968 Chevrolet Camaros
Carquest Premium – Fuel Tank Sending Unit FG104BCQ: Includes Wiring Harness (Part No.FG104BCQ)
from
$98.99
Carquest Premium fuel tank sending units are built to meet or exceed Original Equipment (O.E.) specifications for fit, form and function. Carquest Premium fuel tank sending units are supplied with the wiring harness and gaskets or seals when required for the application. All sending units are precision-tested ensuring accurate readings at any fuel level. Carquest Premium fuel tank sending units are engineered with superior quality components to provide the longest life and are backed up by an industry-leading warranty.
Product Features:
See More
Product Features:
- Meets or exceeds OE specifications for fit, form and function
- All sending units are 100% performance tested
- Includes installation gaskets or seals where applicable
KAI – Fuel Sending Unit (Part No.FSU010126)
from
$125.99
New Platinum Pro Fuel Sending Unit, 76-81 Gm, With Ac, With 2 Outlets, Pump Not Includes
Product Features:
See More
Product Features:
- 76-81 GM, With A/C, With 2 Outlets, Pump Not Included
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Delphi – Fuel Tank Cleaning Kit (Part No.FC01)
from
$12.49
When replacing a fuel pump or module, it’s extremely important to clean the tank. Existing dirt, debris, and contamination stuck in the fuel tank can clog the brand-new strainer. Delphi’s Fuel Tank Cleaning Kit (FC01) and Tool (FC02) can help clean your fuel tank in less than five minutes. The FC01 includes a low-suds solution, cloth, and gloves that works together with the FC02 to help clean those hard to reach places without having to remove the fuel tank. Visit our Resource Center for helpful tips and tricks on fuel pumps, technologies, and more: https://www.delphiautoparts.com/usa/en-US/resource-center.
Product Features:
See More
Product Features:
- Helps avoid premature fuel pump failure
- Lint free towel included
- Low suds formulation
- Removes harmful contaminants from the fuel tank
KAI – Fuel Tank Strap (Part No.GMK4020749671P)
from
$39.99
New Goodmark Pair Of EDP Coated Fuel Tank Straps
Product Features:
See More
Product Features:
- Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Fuel Tank Strap (Part No.FST010152)
from
$30.99
New Platinum Pro Fuel Tank Straps
Product Features:
See More
Product Features:
- Pair
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Carquest Premium – Fuel Pump Module Assembly: Fuel Pump, Sending Unit and Strainer (Part No.M1496006)
from
$235.99
Carquest Premium electric fuel pumps are engineered by Carter Fuel Systems or Agility Auto Parts to meet or exceed Original Equipment (OE) specifications for fit, form and function. Our Carquest Premium fuel pumps are built to be installed in the Original Equipment module or assembly. We have invested in industry-leading quality upgrades, like upgraded turbine impellers and 100% carbon commutators, to deliver greater reliability. Carquest Premium electric fuel pumps are engineered with superior quality components to provide the longest life and reliable performance.
Product Features:
See More
Product Features:
- Meets or exceeds OE specifications for fit, form and function
- 100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
- OE upgraded turbine impellers greatly reduce fuel pulsation
- All fuel pumps are 100% performance tested
- Includes installation gaskets or seals where applicable
Carquest Premium – Mechanical Fuel Pump 1496422: Includes Gasket (Part No.1496422)
from
$27.99
Carquest Premium mechanical fuel pumps are engineered by Carter Fuel Systems or Agility Auto Parts to meet or exceed Original Equipment (OE) specifications for fit, form and function. Every mechanical fuel pump is 100% tested throughout the entire manufacturing process for worry-free performance. Carquest Premium mechanical fuel pumps include the installation gaskets needed for each application. Carquest Premium mechanical fuel pumps are engineered with superior quality components to provide the longest life and reliable performance
Product Features:
See More
Product Features:
- Meets or exceeds OE specifications for fit, form and function
- Special heat-treated rocker arms and case-hardened pins to ensure lasting performance
- All fuel pumps are 100% performance tested
- Includes installation gaskets or seals where applicable
Edelbrock – Mechanical Fuel Pump Block-Off Plates for Big-Block Chevy (Part No.4020)
from
$34.99
Edelbrock part #4020 is a mechanical fuel pump block off plate for small-block Chevy applications. It is a billet aluminum part with counter sunk bolt holes.
Product Features:
See More
Product Features:
- Black Anodized Finish
- Billet Aluminum Material
- Mounting Hardware Included
- Includes 1.5 mm Gasket
- For Small-Block Chevy
Holley – Mechanical Fuel Pump Mounting Pad Cover (Part No.12-814)
from
$24.49
Fuel pump mounting pad cover is used to cover the hole in the block when the mechanical fuel pump is removed to use an electric pump.
Product Features:
See More
Product Features:
- Cover Hole In Block When Mech. Fuel Pump Is Removed
Carquest Premium – Secondary Air Injection Pump Check Valve (Part No.CVC1001)
from
$39.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Dorman – Help – Air Check Valve (Part No.55050)
from
$8.49
The A.I.R. Check Valve is an emission control device that allows air into the exhaust system to help burn pollutants. Our A.I.R Check Valve is made to withstand the heat of the exhaust manifold.
Product Features:
See More
Product Features:
- Emissions, A.I.R Check Valves – 1994-64 AMC, GM, Chrysler, Fiat, Isuzu, Jaguar, Jeep, MG, Nissan,VW
- Air Check Valve
- The A.I.R. Check Valve is an emission control device that allows air into the exhaust system to help burn pollutants. Our A.I.R Check Valve is made to withstand the heat of the exhaust manifold.
- Include gaskets and mounting hardware for a complete repair
- Direct replacement for a proper fit every time
Flowtech – Reducer w/O2 Sensor Fitting (Part No.10110FLT)
ACDelco – 4-Way Male Gray Multi-Purpose Pigtail (Part No.PT1366)
from
$72.99
ACDelco GM Original Equipment Pigtail Connectors are connectors ready to be spliced into vehicle harnesses, and are GM-recommended replacements for your vehicle’s original components. These original equipment pigtail connectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
Product Features:
See More
Product Features:
- Protective outer coverings help provide long-lasting durability
- Color-coded wires allow for easy installation
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
Competition Cams – FUEL PUMP PUSH ROD, CHEVY 1 EA (Part No.4607)
from
$53.99
When a high pressure fuel pump is run with a steel roller cam core, the stock fuel pump pushrod is not compatible with the steel core. You can damage an expensive roller cam as a result of wear at the fuel pump lobe. COMP Cams offers several fuel pump pushrods for various applications.
Product Features:
See More
Product Features:
- Lightweight tubing with bronze tip for steel cams
- 5.75″ Length
- Eliminates wear at the fuel pump lobe often caused by a stock fuel pump pushrod
Dorman – Help – Fuel Pump Push Rod (Part No.03875)
from
$15.29
Our Fuel Pump Push Rod is constructed from high-quality materials for a long service life. Replacement helps restore the fuel pump to proper operation so that your vehicle runs smoothly.
Product Features:
See More
Product Features:
- Direct replacement – this fuel pump push rod is designed to match the fit and function of the original rod on specified vehicles.
- Ideal solution – this rod is a reliable replacement for an original part that has failed
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Edelbrock – Fuel Injection Fuel Rail #3627, -6 AN Black Anodized For Chevrolet Small-Block (Part No.3627)
from
$211.99
All Edelbrock fuel rails are machined from high quality extruded aluminum. Each kit includes fuel rails, stands and mounting hardware. Fuel fittings, crossover line and regulator not included. 3627 Small-Block Chevy fuel rail kit is for use with Pro-Flo X
Product Features:
See More
Product Features:
- Black AnodizedFinish
- High Capacity Fuel Rails
- For Use W/ Pro-Flo XT Manifold #7137
- -6 AN Inlet / Outlet
- Made In The USA
ARP Auto Racing – For Use With Chevy, Hex Style Head Type, Polished, Stainless Steel, With Washers (Part No.430-1602)
from
$10.99
Make sure that mechanical fuel pumps stay properly aligned by using ARP durable black oxide finished chrome moly or rust proof stainless bolts(both materials are rated at 170,000 PSI and considerably stronger than Grade 8 hardware). Your choice of either conventional hex heads or 12 point head. Washers are included.
Product Features:
See More
Product Features:
- Nominally Rated At 170,000 PSI Tensile Strength
- Properly Aligned
- Conventional Hex Heads
- Rust-Proof Stainless Bolts
- 170,000 PSI
KAI – Fuel Filler Neck (Part No.GMK402075367)
from
$54.99
New Goodmark Fuel Filler Neck
Product Features:
See More
Product Features:
- Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Spectra Premium – Fuel Filler Neck (Part No.FN21)
from
$120.99
Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium fuel tank filler necks meet or exceed the performance of the original equipment they replace.
Product Features:
See More
Product Features:
- Unit is designed to OE fit, form and function requirements accomplished by leveraging our OE fuel system design expertise
- Unit is dual coated for enhanced corrosion protection
- Fit tested on the very same vehicle application for which it was developed verifying first-hand that the design fits properly and can be easily installed
- Unit is leak tested after production to ensure product in free from fuel and / or evaporative leaks
- Tested with OE fuel cap to prevent evaporative emission and check engine light failure
Spectra Premium – Fuel Filler Neck (Part No.FN99)
from
$114.99
Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium fuel tank filler necks meet or exceed the performance of the original equipment they replace.
Product Features:
See More
Product Features:
- Unit is designed to OE fit, form and function requirements accomplished by leveraging our OE fuel system design expertise
- Unit is dual coated for enhanced corrosion protection
- Fit tested on the very same vehicle application for which it was developed verifying first-hand that the design fits properly and can be easily installed
- Unit is leak tested after production to ensure product in free from fuel and / or evaporative leaks
- Tested with OE fuel cap to prevent evaporative emission and check engine light failure
Edelbrock – EGR Valve Adapter #8035 For Chevy Small-Block Gen I (Part No.8035)
Edelbrock – EGR Valve Adapter #1476 For Intake Manifold #3701 And #3706 (Part No.1476)
Spectra Premium – Fuel Tank (Part No.GM2721A)
from
$342.99
Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium fuel tanks meet or exceed the performance of the original equipment they replace.
Product Features:
See More
Product Features:
- Unit is designed to OE fit, form and function requirements accomplished by leveraging our OE fuel system design expertise
- Lock ring included with each tank to reduce installation time and to ensure a complete repair
- Made with corrosion resistant, OE approved, Ni Terne steel for durability
- Unit is leak tested after production to ensure product in free from fuel and / or evaporative leaks
- Each new fuel tank is road tested to ensure real world performance and to verify that each design meets our high standards for quality
- Engineered to stringent tolerances based on our Canadian engineers’ in-depth knowledge of the OE part it’s designed to replace
- Fit tested on the very same vehicle application for which it was developed verifying first-hand that the design fits properly and can be easily installed
- Packaged with double-layered foam wrap and heavy-gauge corrugated board to ensure product quality at installation
Carquest – Steel Fuel Tank (Part No.576-196)
from
$151.99
This replacement fuel tank is precision-engineered to match the fit and function of the original fuel tank on specified vehicles.
Product Features:
See More
Product Features:
- Reliable replacement – this fuel tank directly replaces the original fuel tank on specified vehicle years, makes and models
- Durable construction – this fuel tank is made from the same rugged materials as the original part for dependable service
- Quality assured – this part has been validated to ensure a quality fit and long service life
- Trustworthy design – backed by team of product specialists in the United States
Dorman – Steel Fuel Tank (Part No.576-055)
from
$363.99
This replacement fuel tank is precision-engineered to match the fit and function of the original fuel tank on specified vehicles.
Product Features:
See More
Product Features:
- Reliable replacement – this fuel tank directly replaces the original fuel tank on specified vehicle years, makes and models.
- Durable construction – this fuel tank is made from the same rugged materials as the original part for dependable service.
- Quality assured – this part has been validated to ensure a quality fit and long service life
- Trustworthy design – backed by team of product specialists in the United States
KAI – Fuel Tank (Part No.FTK010435)
from
$287.99
New Platinum Pro Fuel Tank 15 Gallon With Neck Incl Lock Ring Kit
Product Features:
See More
Product Features:
- 15 Gallon, With Neck, Includes Lock Ring Kit
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Carquest – Steel Fuel Tank (Part No.576-054)
from
$342.99
This replacement fuel tank is precision-engineered to match the fit and function of the original fuel tank on specified vehicles.
Product Features:
See More
Product Features:
- Reliable replacement – this fuel tank directly replaces the original fuel tank on specified vehicle years, makes and models
- Durable construction – this fuel tank is made from the same rugged materials as the original part for dependable service
- Quality assured – this part has been validated to ensure a quality fit and long service life
- Trustworthy design – backed by team of product specialists in the United States
Spectra Premium – Fuel Tank (Part No.GM27114C)
from
$313.99
Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium fuel tanks meet or exceed the performance of the original equipment they replace.
Product Features:
See More
Product Features:
- Unit is designed to OE fit, form and function requirements accomplished by leveraging our OE fuel system design expertise
- Lock ring included with each tank to reduce installation time and to ensure a complete repair
- Made with corrosion resistant, OE approved, Ni Terne steel for durability
- Unit is leak tested after production to ensure product in free from fuel and / or evaporative leaks
- Each new fuel tank is road tested to ensure real world performance and to verify that each design meets our high standards for quality
- Engineered to stringent tolerances based on our Canadian engineers’ in-depth knowledge of the OE part it’s designed to replace
- Fit tested on the very same vehicle application for which it was developed verifying first-hand that the design fits properly and can be easily installed
- Packaged with double-layered foam wrap and heavy-gauge corrugated board to ensure product quality at installation
Upgrade your 1968 Chevrolet Camaro with Top-Quality Fuel and Emissions Systems
When it comes to maintaining or upgrading your 1968 Chevrolet Camaro, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Chevrolet or enhancing its overall performance, Fuel and Emissions Systems are key to keeping your Camaro functioning at its best. At Advance Auto Parts, we offer a wide selection of 42 Fuel and Emissions Systems for the 1968 Chevrolet Camaro, designed to meet your needs without breaking the bank.
From
Oxygen Sensor
replacements to
Exhaust Gas Recirculation (EGR) Parts
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Fuel and Emissions Systems for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Fuel and Emissions Systems for your 1968 Chevrolet Camaro at great prices.
Our Fuel and Emissions Systems inventory for this model
ranges from just $8.49 to $661.99, with
an average price of $110.94.
Our 42 Fuel and Emissions Systems in stock come from 11 trusted brands, so you’re sure to find the right part for your 1968 Chevrolet Camaro without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1968 Chevrolet Camaro, we stock popular OEM and aftermarket Fuel and Emissions Systems from top names
like Mr. Gasket, and more.
Mr. Gasket Fuel and Emissions Systems
start at just $12.99 and boast an impressive 4 stars average rating from customers.
With 472 customer reviews and counting, our 1968 Chevrolet Camaro Fuel and Emissions Systems have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Fuel and Emissions System upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 1968 Chevrolet Camaro is always ready to roll. We’re committed to providing you with everything you need to keep your Camaro in top shape, all in one place.
Start shopping confidently below for your 1968 Chevrolet Camaro!
Best-Selling Oxygen Sensors for 1968 Chevrolet Camaros
Enhance the driving experience in your Chevrolet with 2 quality Oxygen Sensor components, starting at $65.99.
Most Popular 1968 Chevrolet Camaro Exhaust Gas Recirculation (EGR) Parts
Customize your Chevrolet with 1 Exhaust Gas Recirculation (EGR) Parts products
like EGR Valve Adapters, all
priced under $83.99.
Edelbrock – EGR Valve Adapter #1476 For Intake Manifold #3701 And #3706 (Part No.1476)
Top Picks for 1968 Chevrolet Camaro Fuel Tanks
Upgrade Chevrolet Camaros with top-quality Fuel Tanks parts, including 17 OEM and aftermarket selections for your 1968 model.
Delphi – Fuel Tank Cleaning Kit (Part No.FC01)
from
$12.49
When replacing a fuel pump or module, it’s extremely important to clean the tank. Existing dirt, debris, and contamination stuck in the fuel tank can clog the brand-new strainer. Delphi’s Fuel Tank Cleaning Kit (FC01) and Tool (FC02) can help clean your fuel tank in less than five minutes. The FC01 includes a low-suds solution, cloth, and gloves that works together with the FC02 to help clean those hard to reach places without having to remove the fuel tank. Visit our Resource Center for helpful tips and tricks on fuel pumps, technologies, and more: https://www.delphiautoparts.com/usa/en-US/resource-center.
Product Features:
See More
Product Features:
- Helps avoid premature fuel pump failure
- Lint free towel included
- Low suds formulation
- Removes harmful contaminants from the fuel tank
Dorman – Steel Fuel Tank (Part No.576-195)
from
$252.99
This replacement fuel tank is precision-engineered to match the fit and function of the original fuel tank on specified vehicles.
Product Features:
See More
Product Features:
- Reliable replacement – this fuel tank directly replaces the original fuel tank on specified vehicle years, makes and models.
- Durable construction – this fuel tank is made from the same rugged materials as the original part for dependable service.
- Quality assured – this part has been validated to ensure a quality fit and long service life
- Trustworthy design – backed by team of product specialists in the United States
Spectra Premium – Fuel Tank Sending Unit (Part No.FG104C)
from
$127.99
Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium fuel sending units meet or exceed the performance of the original equipment they replace.
Product Features:
See More
Product Features:
- Unit is designed to OE fit, form and function requirements accomplished by leveraging our OE fuel system design expertise
- Precision tested fuel level sensors ensures vehicles fuel gage will provide an accurate reading at any fuel level
- Includes strainers for smoother installation process and ensures a clean fuel system upon replacement
- Engineered to stringent tolerances based on our Canadian engineers’ in-depth knowledge of the OE part it’s designed to replace
- Manufactured with high quality material, ensuring the durability of this part to prevent costly repairs
KAI – Fuel Sending Unit (Part No.FSU010129)
from
$78.99
New Platinum Pro Fuel Tank Sending Unit, Pump Not Included
Product Features:
See More
Product Features:
- Pump Not Included
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Fuel Tank Brace (Part No.GMK402074567)
from
$69.99
New Goodmark Driver Or Passenger Side Fuel Tank Brace, Made Of Steel
Product Features:
See More
Product Features:
- Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Dorman – Fuel Tank Strap Set (Part No.578-056)
from
$32.49
Recommended for replacement whenever the fuel tank is replaced or serviced, this strap is a direct replacement for the original. Manufactured from durable materials to withstand harsh road and weather conditions.
Product Features:
See More
Product Features:
- Direct replacement – this fuel tank strap matches the fit, function and performance of the original part.
- Ideal solution – recommended for replacement when the fuel tank is serviced or replaced.
- Durable construction – manufactured from quality materials for superior service and reliability
- Trustworthy design – backed by 100 years of automotive aftermarket experience
KAI – Fuel Tank Strap (Part No.FST010056)
from
$38.99
New Platinum Pro Fuel Tank Straps
Product Features:
See More
Product Features:
- Edp Coated
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Spectra Premium – Fuel Tank (Part No.GM32A)
from
$275.99
Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium fuel tanks meet or exceed the performance of the original equipment they replace.
Product Features:
See More
Product Features:
- Unit is designed to OE fit, form and function requirements accomplished by leveraging our OE fuel system design expertise
- Lock ring included with each tank to reduce installation time and to ensure a complete repair
- Made with corrosion resistant, OE approved, Ni Terne steel for durability
- Unit is leak tested after production to ensure product in free from fuel and / or evaporative leaks
- Each new fuel tank is road tested to ensure real world performance and to verify that each design meets our high standards for quality
- Engineered to stringent tolerances based on our Canadian engineers’ in-depth knowledge of the OE part it’s designed to replace
- Fit tested on the very same vehicle application for which it was developed verifying first-hand that the design fits properly and can be easily installed
- Packaged with double-layered foam wrap and heavy-gauge corrugated board to ensure product quality at installation
KAI – Fuel Sending Unit (Part No.FSU010176)
from
$75.99
New Platinum Pro Fuel Sending Unit With 5/16 Line Without Vent Line
Product Features:
See More
Product Features:
- 5/16 Line Without Vent Line
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Fuel Filler Neck (Part No.GMK402075367)
from
$54.99
New Goodmark Fuel Filler Neck
Product Features:
See More
Product Features:
- Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Fuel Tank Strap (Part No.GMK401174967S)
from
$23.99
New Goodmark Fuel Tank Strap Hardware Kit, Consists Of Bolts, Nuts, Washers, And Screws
Product Features:
See More
Product Features:
- Consists Of Bolts Nuts Washers And Screws
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Carquest Premium – Fuel Tank Sending Unit FG104CCQ: Includes Wiring Harness (Part No.FG104CCQ)
from
$102.99
Carquest Premium fuel tank sending units are built to meet or exceed Original Equipment (O.E.) specifications for fit, form and function. Carquest Premium fuel tank sending units are supplied with the wiring harness and gaskets or seals when required for the application. All sending units are precision-tested ensuring accurate readings at any fuel level. Carquest Premium fuel tank sending units are engineered with superior quality components to provide the longest life and are backed up by an industry-leading warranty.
Product Features:
See More
Product Features:
- Meets or exceeds OE specifications for fit, form and function
- All sending units are 100% performance tested
- Includes installation gaskets or seals where applicable
Spectra Premium – Fuel Tank and Pump Assembly Combination (Part No.GM32AFI)
from
$661.99
Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium classic injection fuel tanks meet or exceed the performance of the original equipment they replace.
Product Features:
See More
Product Features:
- Application specific design ensure a perfect fit guarantee
- OEM, fit, form and function paired with todays fuel injection technology
- Fuel tanks made with corrosion resistant OEM approved Ni Terne steel
- Proudly manufactured in Canada under stringent quality systems (ISO 9002)
- Unit is leak tested after production to ensure product is free from fuel and / or evaporative leaks
KAI – Fuel Tank (Part No.FTK010090)
from
$241.99
New Platinum Pro Fuel Tank, 67-68 Pont Firebird
Product Features:
See More
Product Features:
- 67-68 Pont Firebird
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Dorman – Fuel Sending Unit Without Pump (Part No.692-253)
from
$80.99
This fuel tank sending unit is designed to match the fit and function of the original unit on specified applications. Made of quality materials, it is engineered for reliable performance and durability.
Product Features:
See More
Product Features:
- Direct replacement – this fuel tank sending unit is designed to match the fit and function of the original unit on specified applications.
- Restores functionality – reliable replacement for an original part that has failed due to internal sensor failure.
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
KAI – Fuel Tank Strap (Part No.GMK4020749671SP)
from
$59.99
New Goodmark Pair Of Stainless Steel Fuel Tank Straps
Product Features:
See More
Product Features:
- Made Of Stainless Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Fuel Tank Strap (Part No.GMK4020749671P)
from
$39.99
New Goodmark Pair Of EDP Coated Fuel Tank Straps
Product Features:
See More
Product Features:
- Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
In-Demand Fuel Rails for 1968 Chevrolet Camaros
Select from 1 premium Fuel Rails parts for your 1968 Chevrolet Camaro.
Edelbrock – Fuel Injection Fuel Rail #3627, -6 AN Black Anodized For Chevrolet Small-Block (Part No.3627)
from
$211.99
All Edelbrock fuel rails are machined from high quality extruded aluminum. Each kit includes fuel rails, stands and mounting hardware. Fuel fittings, crossover line and regulator not included. 3627 Small-Block Chevy fuel rail kit is for use with Pro-Flo X
Product Features:
See More
Product Features:
- Black AnodizedFinish
- High Capacity Fuel Rails
- For Use W/ Pro-Flo XT Manifold #7137
- -6 AN Inlet / Outlet
- Made In The USA
Most Sold 1968 Chevrolet Camaro Fuel Pumps
Explore our best-selling Chevrolet parts for the 1968 Camaro among 19 OEM and aftermarket options starting from $10.99.
Dorman – Help – Fuel Pump Push Rod (Part No.03875)
from
$15.29
Our Fuel Pump Push Rod is constructed from high-quality materials for a long service life. Replacement helps restore the fuel pump to proper operation so that your vehicle runs smoothly.
Product Features:
See More
Product Features:
- Direct replacement – this fuel pump push rod is designed to match the fit and function of the original rod on specified vehicles.
- Ideal solution – this rod is a reliable replacement for an original part that has failed
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Edelbrock – Performer RPM Series fuel pump for SBC and W Series Chevy (Part No.1721)
from
$168.99Product Features:
- Unique Valve Design
- Improves Flow Quantity/Quality
- Supports Engines Up To 550 HP
- Hi-Vol 0.375 in. NPT Inlet/Outlet
- Produces 6 psi
- Gasoline Or Mixed Fuels Only
Mr. Gasket – Electric Fuel Pump (Part No.12S)
from
$64.99
Gravity fed type pump with simple two-wire design. Works on 12 Volt negative ground systems only. Includes fittings and mounting hardware along with easy to follow DIY instructions. Pumps require approximately one amp average draw at maximum delivery. Flows 35 GPH (gallons per hours at 4-7 PSI (pounds per square inch). Universal design for most domestic 4, 6, & 8-cylinder carburetor applications.
Product Features:
See More
Product Features:
- Solid-state Worry Free Electronics
- Internal Pressure Regulating
- Universal Design Allows For Easy Installation
- No DiaphraGMs Or Mechanical Parts To Wear Out
- They Make An Excellent Fuel Transfer or Booster Pump
- Not designed for use on aircraft of any type.
- Hose Barbs Fit 5/16″ Fuel Hose
- Self-priming, 2 wire design
- Eliminates vapor lock and flooding
Mr. Gasket – Fuel Pump Block-Off Plate (Part No.1516)
from
$12.99
Precision cut to cover stock fuel pump opening when converting to an electric fuel pump. Gasket included.
Product Features:
See More
Product Features:
- Chrome Plated Steel
- Comes With Gasket
- Easy Installation
Carquest Premium – Fuel Pump Hanger Assembly: Fuel Pump and Strainer (Part No.160572)
from
$23.99
Carquest Premium mechanical fuel pumps are engineered by Carter Fuel Systems or Agility Auto Parts to meet or exceed Original Equipment (OE) specifications for fit, form and function. Every mechanical fuel pump is 100% tested throughout the entire manufacturing process for worry-free performance. Carquest Premium mechanical fuel pumps include the installation gaskets needed for each application. Carquest Premium mechanical fuel pumps are engineered with superior quality components to provide the longest life and reliable performance
Product Features:
See More
Product Features:
- Meets or exceeds OE specifications for fit, form and function
- Special heat-treated rocker arms and case-hardened pins to ensure lasting performance
- All fuel pumps are 100% performance tested
- Includes installation gaskets or seals where applicable
Carquest Premium – Mechanical Fuel Pump 1541126: Includes Gasket (Part No.1541126)
from
$32.99
Carquest Premium mechanical fuel pumps are engineered by Carter Fuel Systems or Agility Auto Parts to meet or exceed Original Equipment (OE) specifications for fit, form and function. Every mechanical fuel pump is 100% tested throughout the entire manufacturing process for worry-free performance. Carquest Premium mechanical fuel pumps include the installation gaskets needed for each application. Carquest Premium mechanical fuel pumps are engineered with superior quality components to provide the longest life and reliable performance
Product Features:
See More
Product Features:
- Meets or exceeds OE specifications for fit, form and function
- Special heat-treated rocker arms and case-hardened pins to ensure lasting performance
- All fuel pumps are 100% performance tested
- Includes installation gaskets or seals where applicable
Carquest Premium – Mechanical Fuel Pump Includes Gasket (Part No.1542665)
from
$31.99
Carquest Premium mechanical fuel pumps are engineered by Carter Fuel Systems or Agility Auto Parts to meet or exceed Original Equipment (OE) specifications for fit, form and function. Every mechanical fuel pump is 100% tested throughout the entire manufacturing process for worry-free performance. Carquest Premium mechanical fuel pumps include the installation gaskets needed for each application. Carquest Premium mechanical fuel pumps are engineered with superior quality components to provide the longest life and reliable performance
Product Features:
See More
Product Features:
- Meets or exceeds OE specifications for fit, form and function
- Special heat-treated rocker arms and case-hardened pins to ensure lasting performance
- All fuel pumps are 100% performance tested
- Includes installation gaskets or seals where applicable
ARP Auto Racing – For Use With Chevy, Hex Style Head Type, Polished, Stainless Steel, With Washers (Part No.430-1602)
from
$10.99
Make sure that mechanical fuel pumps stay properly aligned by using ARP durable black oxide finished chrome moly or rust proof stainless bolts(both materials are rated at 170,000 PSI and considerably stronger than Grade 8 hardware). Your choice of either conventional hex heads or 12 point head. Washers are included.
Product Features:
See More
Product Features:
- Nominally Rated At 170,000 PSI Tensile Strength
- Properly Aligned
- Conventional Hex Heads
- Rust-Proof Stainless Bolts
- 170,000 PSI
Holley – Mechanical Fuel Pump (Part No.12-454-20)
from
$212.99
Mechanical fuel pump made from heavy duty construction for continuous high RPM operation. Fuel body casting can be rotated to accommodate various plumbing situations. Fuel pressure regulator is not required.
Product Features:
See More
Product Features:
- High Output Fuel Flow
- Flows 170 gph Free Flow
- Shutoff Pressure Pre-Set At 8 PSI
- Fuel Pressure Regulator Required
- Heavy Duty Construction For Continuous High rpm Operation
- Redesigned High Flow Valves Ensure Adequate Fuel Delivery
- Fuel Body Casting Can Be Rotated For Plumbing Situations
- 3/4in.-16 Inlet And Outlet Ports
- Fittings Not Included
Holley – Mechanical Fuel Pump (Part No.12-835)
from
$124.99
Mechanical fuel pump made from heavy duty construction for continuous high RPM operation. Fuel body casting can be rotated to accommodate various plumbing situations. Fuel pressure regulator is not required.
Product Features:
See More
Product Features:
- Street Performance
- Flows 80 gph Free Flow
- Shutoff Pressure Pre-Set 7.5 PSI
- Fuel Pressure Regulator Is Not Required
- Heavy Duty Construction For Continuous High rpm Operation
- Fuel Body Casting Can Be Rotated For Plumbing Situations
- Inlet And Outlet Tapped For 1/4 in. NPT
Edelbrock – Victor Series fuel pump is for Big-Block Chevrolet (Part No.1712)
from
$185.99
Edelbrock part #1712 Victor Series fuel pump is for Big-Block Chevrolet. The Edelbrock Victor Series fuel pump is a must for drag racing, circle track racing, street machines or any application that demands a high-volume fuel delivery, these fuel pumps fe
Product Features:
See More
Product Features:
- Hi-Vol 0.5 in. NPT Inlet/Outlet
- Large Alcohol-Proof Diaphragm
- Aircraft-Type Allen Bolts
- Produces 10 psi
- For Gasoline Only
- Finest Quality Material
- Beautifully Detailed
- Use w/Fuel Pressure Regulator PN[8190]
Edelbrock – Victor Series fuel pump is for SBC and W Series Chevrolet (Part No.1711)
from
$174.99
High volume 0.5 inch NPT inlet and outlet. Large alcohol-proof diaphragm. Aircraft-type Allen bolts. Produces 10 psi. For gasoline only. Finest quality material. Beautifully detailed. Use with fuel pressure regulator PN(8190).
Product Features:
See More
Product Features:
- Hi-Vol 0.5 in. NPT Inlet/Outlet
- Large Alcohol-Proof Diaphragm
- Aircraft-Type Allen Bolts
- Produces 10 psi
- For Gasoline Only
- Finest Quality Material
- Beautifully Detailed
- Use w/Fuel Pressure Regulator PN[8190]
KAI – Fuel Pump Module Assembly (Part No.FMD010083)
from
$62.99
New Platinum Pro Fuel Pump Module
Product Features:
See More
Product Features:
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Competition Cams – FUEL PUMP PUSH ROD, CHEVY 1 EA (Part No.4607)
from
$53.99
When a high pressure fuel pump is run with a steel roller cam core, the stock fuel pump pushrod is not compatible with the steel core. You can damage an expensive roller cam as a result of wear at the fuel pump lobe. COMP Cams offers several fuel pump pushrods for various applications.
Product Features:
See More
Product Features:
- Lightweight tubing with bronze tip for steel cams
- 5.75″ Length
- Eliminates wear at the fuel pump lobe often caused by a stock fuel pump pushrod
Carquest Premium – Mechanical Fuel Pump 1542664: Includes Gasket (Part No.1542664)
from
$36.49
Carquest Premium mechanical fuel pumps are engineered by Carter Fuel Systems or Agility Auto Parts to meet or exceed Original Equipment (OE) specifications for fit, form and function. Every mechanical fuel pump is 100% tested throughout the entire manufacturing process for worry-free performance. Carquest Premium mechanical fuel pumps include the installation gaskets needed for each application. Carquest Premium mechanical fuel pumps are engineered with superior quality components to provide the longest life and reliable performance
Product Features:
See More
Product Features:
- Meets or exceeds OE specifications for fit, form and function
- Special heat-treated rocker arms and case-hardened pins to ensure lasting performance
- All fuel pumps are 100% performance tested
- Includes installation gaskets or seals where applicable
Edelbrock – Mechanical Fuel Pump Block-Off Plates for Big-Block Chevy (Part No.4020)
from
$34.99
Edelbrock part #4020 is a mechanical fuel pump block off plate for small-block Chevy applications. It is a billet aluminum part with counter sunk bolt holes.
Product Features:
See More
Product Features:
- Black Anodized Finish
- Billet Aluminum Material
- Mounting Hardware Included
- Includes 1.5 mm Gasket
- For Small-Block Chevy
Carquest Premium – Mechanical Fuel Pump SP1021MPCQ (Part No.SP1021MPCQ)
from
$31.99
Carquest Premium mechanical fuel pumps are built to meet or exceed Original Equipment (OE) specifications for fit, form and function. Every mechanical fuel pump is 100% tested throughout the entire manufacturing process for worry-free performance. Carquest Premium mechanical fuel pumps include the installation gaskets needed for each application. Carquest Premium mechanical fuel pumps are engineered with superior quality components to provide the longest life and reliable performance.
Product Features:
See More
Product Features:
- Meets or exceeds OE specifications for fit, form and function
- Special heat-treated rocker arms and case-hardened pins to ensure lasting performance
- All fuel pumps are 100% performance tested
- Includes installation gaskets or seals where applicable
Holley – Mechanical Fuel Pump Mounting Pad Cover (Part No.12-814)
from
$24.49
Fuel pump mounting pad cover is used to cover the hole in the block when the mechanical fuel pump is removed to use an electric pump.
Product Features:
See More
Product Features:
- Cover Hole In Block When Mech. Fuel Pump Is Removed
ARP Auto Racing – Chrome Moly (Part No.134-8701)
from
$22.99
Stock fuel pump pushrods leave a lot to be desired. In fact, they have been known to break at the most inopportune time. To provide you with required reliability and improved performance, ARP has developed these sophisticated and durable pushrods. they are made from premium grade aerospace chrome moly and center less ground to precise diameter. A hollow core serves to reduce the reciprocating mass, which requires less energy to operate. The less drag on the motor, the more power available to you
Product Features:
See More
Product Features:
- Made From Premium Grade Aerospace Chrome Moly
- Center Less Ground To Precise Diameter
- Hollow Core Serves To Reduce The Reciprocating Mass, Which Requires Less Energy To Operate
- Provide With Required Reliability And Improved Performance
Top-Rated Fuel and Emissions Systems Brands For Your 1968 Chevrolet Camaro
Shop for the best-rated brands offering Fuel and Emissions Systems and other products for your 1968 Chevrolet Camaros. Below you’ll find some of our best rated Fuel and Emissions Systems from Mr. Gasket, and more. Fuel and Emissions Systems from these brands that fit a 1968 Camaro start at just $12.99 and are rated as high as 4 stars. OEM and aftermarket Fuel and Emissions Systems don’t get more top quality, durable, and affordable than from the brands below.
Popular Mr. Gasket 1968 Chevrolet Camaro Fuel and Emissions Systems
When it comes to maintaining or upgrading your 1968 Chevrolet Camaro, using quality Fuel and Emissions Systems is essential to ensure durability and a perfect fit. Mr. Gasket ticks all of those boxes. We offer a wide selection of Mr. Gasket Fuel and Emissions Systems, specifically designed for the 1968 Chevrolet Camaro. With over 2 Mr. Gasket brand Fuel and Emissions Systems in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $12.99, with an average price of just $38.99. Plus, with over 39 customer reviews and an average rating of 4 stars, you can trust that our Mr. Gasket Fuel and Emissions Systems will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$12.99
$12.99
(2)
“This is a block off plate for Ford motors. FE series, 385 series, my dad’s 390, my 351m and my 460 use this shape.”
FAQs for 1968 Chevrolet Camaro Fuel and Emissions Systems
Which Fuel and Emissions Systems are best-sellers for 1968 Chevrolet Camaros?
Out of 42 Fuel and Emissions Systems that fit 1968 Chevrolet Camaros, the following parts are the top sellers:
- Fuel Tank Cleaning Kit (11692237) – $12.49
- Fuel Pump Hanger Assembly: Fuel Pump and Strainer (11763318) – $23.99
- Mechanical Fuel Pump 1541126: Includes Gasket (11763952) – $32.99
What’s the price range for 1968 Chevrolet Camaro Fuel and Emissions Systems?
Fuel and Emissions System prices for the 1968 Chevrolet Camaro start at $8.49 and go up to $661.99 for the most premium parts.
What’s the average price of a Fuel and Emissions System for a 1968 Chevrolet Camaro?
The average price for Fuel and Emissions Systems for the 1968 Chevrolet Camaro is $110.94. Keep in mind the variety of part types within our Fuel and Emissions System category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Fuel and Emissions Systems for other Chevrolet Camaro model years?
What are the cheapest Fuel and Emissions Systems for my 1968 Chevrolet Camaro?
The cheapest 1968 Chevrolet Camaro Fuel and Emissions Systems we carry in stock are:
- Air Check Valve (17190373) – $8.49
- For Use With Chevy, Hex Style Head Type, Polished, Stainless Steel, With Washers (11530006) – $10.99
- Fuel Tank Cleaning Kit (11692237) – $12.49
- Fuel Pump Block-Off Plate (17360034) – $12.99
- Fuel Pump Push Rod (22148637) – $15.29
What are the top-rated Fuel and Emissions Systems that fit the 1968 Chevrolet Camaro?
Out of 472 reviews by customers, our 1968 Chevrolet Camaro Fuel and Emissions Systems have an average customer rating of . These are some of the highest-rated Fuel and Emissions System types for the 1968 Chevrolet Camaro and their top-rated products:
- Oxygen Sensors
- Reducer w/O2 Sensor Fitting (6310559) – $65.99
What types of Fuel and Emissions Systems do you sell for my 1968 Chevrolet Camaro?
As of 2/5/25, these are some of the most in-demand types of Fuel and Emissions Systems for a 1968 Chevrolet Camaro:
Can I get help with 1968 Chevrolet Camaro Fuel and Emissions System orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Chevrolet Fuel and Emissions Systems and more.
What is your return policy for Chevrolet Camaro Fuel and Emissions Systems?
Advance Auto Parts keeps returns simple. For new Chevrolet Camaro Fuel and Emissions Systems and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
