1968 Buick Riviera Alternator Parts

The charging system has been required as long as we have had a need for an electrical system and from research it’s been since the requirement of horns in motor vehicle in the early 1900’s. An alternator is a voltage generator that uses mechanical energy to rotate a set of magnets within a field of windings called a stator. The alternating current (AC) voltage created by the spinning magnetic field is converted into a usable direct current (DC) voltage with a rectifier and then regulated by a voltage regulator so that the voltage level in the electrical system stays within a specific operating range. The alternator provides all the voltage needed to operate a vehicle, the battery is only used as a reserve for heavier load conditions, as a voltage source for the engine starting system, and to supply a small amount of voltage to the electromagnets in the alternator which boosts the magnetic field in the alternator and increases voltage output.

Product Features:

• Application matched components ensure the charging system can be returned to like new condition.

Carquest Premium alternators are premium constructed, original equipment (O.E.) replacement parts with industry-leading limited warranties. Our Carquest Premium alternators are designed to meet or exceed OE specifications for fit, form and function. Our alternators are remanufactured by an IATF/TS 16949 certified supplier that meets the highest standards achievable. We replace all wear components (brushes, bushings and bearings) with new components to ensure long-life. All critical components are electronically tested during assembly and the entire unit is 100% tested, ensuring proper performance backed by an industry-leading limited warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.

Product Features:

• 
  
  

Product Features:

• Designed to meet or exceed OE specifications for fit, form and function
• Remanufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
• Regulators and rectifiers are 100% electronically load tested for reliable charging performance
• 100% new OE-quality brushes and bearings are used to ensure long service life
• Rotors and stators are load tested and double insulated for maximum charging performance
• Slip rings are precision polished for maximum brush contact and service life
• Application-specific technical bulletins included where applicable
• All units are 100% triple tested to ensure quality and performance
• Technical support team staffed with ASE Certified Technicians: 1-800-228-9672

The remanufactured Mr. Gasket chrome alternator delivers exceptional dependability, exceeding original equipment specifications to ensure reliable performance. Designed to fit most GM vehicles from 1966 to 1972, this alternator features a GM 10DN style with a durable chrome-plated finish that adds a sleek touch under the hood. With an impressive 80-amp output and 12V voltage, it provides robust power for your vehicle’s electrical system. The 6.6″ bolt spacing ensures easy installation, while the included 1-groove V-belt pulley enhances compatibility with OEM-style regulators. Whether you’re restoring a classic or upgrading your ride, this alternator combines functionality, durability, and style to meet your automotive needs.

Product Features:

• Fits Most 1966-’72 GM Vehicles
• Bolt Spacing 6.6″
• 80 Amps
• GM 10DN Style Alternator
• Chrome Plated Finish
• includes V-Belt Pulley – 1-Groove
• Use with OEM Style Regulator

Elevate your vehicle’s performance with this high-output alternator, designed to meet the demands of drag racing, circle track, asphalt, or dirt. Featuring the Ad244 style, it delivers a superior 140-amp output at idle, ensuring consistent power when you need it most. Built with a heavy-duty regulator and rectifier, high-temperature windings, and dual internal fans, this alternator guarantees exceptional efficiency and cooling under extreme conditions. Its late-model compatibility with remote voltage control ensures seamless integration with modern vehicles, while the proof of performance tag provides confidence in its reliability. Whether you’re on the track or off-road, this alternator is engineered for durability and peak performance.

Product Features:

• 
  
  

Product Features:

• Ad244 Style
• Superior Output At Idle, A Whopping 140 Ampere
• Heavy Duty Regulator And Rectifier
• High Temperature Windings
• Dual Internal Fans For High Efficiency And Excellent Cooling
• Late Model Compatibility With Remote Voltage Control
• Proof Of Performance Tag

The 150 Amp Alternator by Powermaster is engineered to meet the demands of high-performance racing, whether you’re into drag racing, circle track, asphalt, or dirt. Designed for versatility, it offers one or three-wire operation and delivers an impressive 70 amperes at idle, ensuring reliable power when you need it most. Featuring a gold battery post and a proof-of-performance tag, this alternator is a bolt-on upgrade for early model vehicles, combining modern efficiency with classic compatibility. Powermaster provides the largest selection of fans, pulleys, nose cones, and baffle plates in the industry, with an optional custom high-volume fan for enhanced cooling. Built for durability and peak performance, this alternator is the ultimate choice for racers who demand reliability and power on the track.

Product Features:

• 
  
  

Product Features:

• One Or Three Wire Operation
• 70 Ampere At Idle
• Gold Battery Post
• Proof Of Performance Tag
• Bolt-on Early Model Upgrade
• Gold Battery Post. Proof Of Performance Tag
• Largest Selection Of Fans, Pulleys, Nose Cones, And Baffle Plates In The Industry. Optional Custom HV (High Volume) Fan

Carquest Starters with 100% NEW construction will restore hard working vehicles to exceed OE specified performance & endurance. All new units and components offer unmatched performance, reduce downtime & customer comebacks. Carquest HD alternators are primed to keep you moving forward. Built to perform in severe duty environments where consistent efficient high outputs are required.

Product Features:

• High quality components form the foundation our parts are built from. Transpo¿s innovative and high quality electronic technologies for internal components are incorporated to achieve high performance outputs.
• High quality components form the foundation our parts are built from. Transpo┐s innovative and high quality electronic technologies for internal components are incorporated to achieve high performance outputs.
• Power & Efficiency are designed into every component. No matter the ambient temperature, starters will provide maximum cranking power to get engines running.
• Connectors and power transmission components are highly resistant to extreme moisture environments because we use nickel plated contactors and double armature coating. We maintain a rigorous test schedule with endurance, salt spray, dirt and grime and out
• Integrated magnetic switch provides protection against weak power from batteries.
• Over-Crank Protection (OCP) Monitors heat in starter from over cranking & shuts down starter to prevent burning
• Precision design and machining are the Extreme vibration failure solution. Vehicles often perform in adverse conditions like extreme temperatures that create tolerance shifts that produce high frequency vibration, which leads to resistance in power transf
• Load dump protection ensures transient voltage spikes do not damage transistor
• Improved power transmission with lower engine speed keeps accessories and powered implements running at maximum output without additional load to the engine.

We develop and produce high-quality roller bearings, spherical bearings, and plain bearings worldwide for a wide range of applications.

Product Features:

• Radial Ball Bearing, Both Sides Shield.
• Coverage of classic and new high-tech solutions for the best system coverage