1968 Buick LeSabre Carburetor Parts

Essential 1968 Buick LeSabre Carburetor Parts

Edelbrock – Standard Flow Carburetor Power Valve #12645 Single Stage 4.5in Hg (Part No.12645)

Standard Flow Carburetor Power Valve #12645 Single Stage 4.5in Hg

from

$16.99
Product Features:
  • The Edelbrock #12645 Single Stage 4.5 Hg Power Valve operates by using engine vacuum to control the opening and closing rate.
  • During heavy load or under full power situations, they open to supply additional fuel to the main system to eliminate hesitation and bogging, ensuring the smooth delivery of power without any drivability concerns.
See More

Edelbrock – Carb Power Valve Block-Off Plug #12624 For Demon, Holley, & Quick Fuel Carbs (Part No.12624)

Carb Power Valve Block-Off Plug #12624 For Demon, Holley, & Quick Fuel Carbs

from

$12.99
The Edelbrock 94 Carburetor power valve block off #12624 is a great way to fine tune your vintage series carburetor. These Edelbrock Power valve Block Off’s will fit Edelbrock Vintage Series 94 carburetors as well as original Holley 94’s and its later var

Product Features:
  • Fits Any Demon®, Holley®, And Quick Fuel® Carburetors
  • Includes Gasket
  • 1/2 in. x 28 Power Valve Thread
  • For Applications That Prefer To Run Carbs Without The Power Valves
  • Made In The USA
See More

Edelbrock – Standard Flow Carburetor Power Valve #12665 Single Stage 6.5in Hg (Part No.12665)

Standard Flow Carburetor Power Valve #12665 Single Stage 6.5in Hg

from

$16.99
Product Features:
  • The Edelbrock #12665 Single Stage 6.5 Hg Power Valve operates by using engine vacuum to control the opening and closing rate.
  • During heavy load or under full power situations, they open to supply additional fuel to the main system to eliminate hesitation and bogging, ensuring the smooth delivery of power without any drivability concerns.
See More

Edelbrock – Standard Flow Carburetor Power Valve #12635 Single Stage 3.5in Hg (Part No.12635)

Standard Flow Carburetor Power Valve #12635 Single Stage 3.5in Hg

from

$16.99
The Edelbrock #12635 Single Stage 3.5 Hg Power Valve operates by using engine vacuum to control the opening and closing rate. During heavy load or under full power situations, they open to supply additional fuel to the main system to eliminate hesitation

Product Features:
  • Gasket Or Seal Included
  • 3.5 in. Hg Opening Vacuum
  • Single Stage
  • Standard Flow Type
  • Made In The USA
See More

Edelbrock – Standard Flow Carburetor Power Valve #12655 Single Stage 5.5in Hg (Part No.12655)

Standard Flow Carburetor Power Valve #12655 Single Stage 5.5in Hg

from

$16.99
Product Features:
  • The Edelbrock #12645 Single Stage 5.5 Hg Power Valve operates by using engine vacuum to control the opening and closing rate.
  • During heavy load or under full power situations, they open to supply additional fuel to the main system to eliminate hesitation and bogging, ensuring the smooth delivery of power without any drivability concerns.
See More

Carquest – Needle and Seat (Part No.93-554R)

Needle and Seat

from

$9.49
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:
  • Designed to OE standards for ease of installation
See More

Edelbrock – Non-Adjustable Carburetor Needle and Seat #12605 Size .110 With Viton Tip (Part No.12605)

Non-Adjustable Carburetor Needle and Seat #12605 Size .110 With Viton Tip

from

$20.99
The Edelbrock #12605 Non-Adjustable Inlet Needle and Seat assembly will fit carburetors with center hung fuel bowls and can be used as replacements or performance upgrades. Kit includes one locking screw, two gaskets and one O-ring. For use with Holley 23

Product Features:
  • Center Hung Floats
  • 0.11 in. Needle Diameter
  • Viton® Needle Material
  • Sold Individually
  • Non-Adjustable Type
See More

Edelbrock – Adjustable Carburetor Needle and Seat #12602 Size .097 With Viton Tip (Part No.12602)

Adjustable Carburetor Needle and Seat #12602 Size .097 With Viton Tip

from

$18.99
Product Features:
  • The Edelbrock #12602 Adjustable Inlet Needle and Seat assembly will fit Carburetors with center hung fuel bowls and can be used as replacements or performance upgrades.
  • Kit includes one locking screw, two gaskets and one O-ring. For use with Holley 2300, 4150, 4160, 4165, 4175 and 4500 Series, Quick Fuel 4500, Professional Series and Q-Series, as well as various Demon Carburetors.
See More

Carquest – Carburetor Float (Part No.779-1773)

Carburetor Float

from

$13.29
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:
  • Designed to OE standards for ease of installation
  • Designed and manufactured to our stringent quality standards at a certified facility, so you can install with confidence
  • Premium components and durable materials withstand harsh engine conditions to increase longevity and lifespan
  • Undergoes extensive testing and validation for proper performance and peak reliability
  • As a global manufacturer of automotive aftermarket products, we maintain complete quality control throughout the manufacturing process
See More

Edelbrock – Carb Needle & Seat Hardware Kit #12600 FOR Holley Carb w/ Center Hung Fuel Bowl (Part No.12600)

Carb Needle & Seat Hardware Kit #12600 FOR Holley Carb w/ Center Hung Fuel Bowl

from

$13.99
The Edelbrock #12605 Hardware Kit will fit carburetors with center hung fuel bowls and can be used as replacements or performance upgrades. Kit includes one locking screw, two gaskets and one O-ring. For use with Holley 2300, 4150, 4160, 4165, 4175 and 45

Product Features:
  • Fits Holley® Carburetors With Center Hung Fuel Bowl
  • Includes Adjusting Nut
  • Includes Locking Screw
  • Includes O-Ring
  • Includes Washers
See More

Edelbrock – Performer 14073 Carburetor: 750 CFM, 4 Barrel, Square Bore, Manual Inlet, Black (Part No.14073)

Performer 14073 Carburetor: 750 CFM, 4 Barrel, Square Bore, Manual Inlet, Black

from

$527.99
Product Features:
  • Edelbrock products offer improved performance and aesthetics for a broad array of vehicles and engines. ‘Proven performance’ is the philosophy by which Edelbrock was founded and it continues to this day with the highest standards for performance and quali
  • Manual Choke, Black
  • 4 Barrel Count
  • Square Bore
See More

United Carb – Remanufactured Carburetor 2 Barrel (Part No.14-4217)

Remanufactured Carburetor 2 Barrel

from

$315.99
Made in the USA, this remanufactured carburetor is completely disassembled and all internal parts, such as gaskets, gas filters, needle/seats and accelerator plunger cups, are discarded. All metal castings are thoroughly cleaned and restored to OEM (original equipment manufacturer) finish. Then the carburetor is reassembled to OEM-quality standards using all new component parts. Each carburetor is flow tested to simulate actual engine conditions, and all internal and external adjustments are set to OEM specifications.
See More

United Carb – Remanufactured Carburetor 2 Barrel (Part No.14-4212)

Remanufactured Carburetor 2 Barrel

from

$405.99
Made in the USA, this remanufactured carburetor is completely disassembled and all internal parts, such as gaskets, gas filters, needle/seats and accelerator plunger cups, are discarded. All metal castings are thoroughly cleaned and restored to OEM (original equipment manufacturer) finish. Then the carburetor is reassembled to OEM-quality standards using all new component parts. Each carburetor is flow tested to simulate actual engine conditions, and all internal and external adjustments are set to OEM specifications.
See More

Edelbrock – Performer Carburetor #9913 750 CFM With Electric Choke, Satin Finish (Non-EGR) (Part No.9913)

Performer Carburetor #9913 750 CFM With Electric Choke, Satin Finish (Non-EGR)

from

$427.99
Product Features:
  • Satin Finish
  • 4 Barrel
  • Annular Booster Type
  • Electric Choke Type
  • 750 cfm Maximum Flow Rating
See More

United Carb – Remanufactured Carburetor 4 Barrel (Part No.1-175)

Remanufactured Carburetor 4 Barrel

from

$452.99
Made in the USA, this remanufactured carburetor is completely disassembled and all internal parts, such as gaskets, gas filters, needle/seats and accelerator plunger cups, are discarded. All metal castings are thoroughly cleaned and restored to OEM (original equipment manufacturer) finish. Then the carburetor is reassembled to OEM-quality standards using all new component parts. Each carburetor is flow tested to simulate actual engine conditions, and all internal and external adjustments are set to OEM specifications.
See More

Edelbrock – AVS2 1905 Carburetor: 650 CFM, 4 Barrel, Square Bore, Manual Choke Inlet (Part No.1905)

AVS2 1905 Carburetor: 650 CFM, 4 Barrel, Square Bore, Manual Choke Inlet

from

$407.99
orange (5″ Hg) step-up spring. Use our Carburetor Stud Kits #8008 or #8024 if needed. Match with a variety of manifolds that include Edelbrock Performer, Performer EPS, RPM Air-Gap, Performer RPM, Torker II or other brands of similar design. For a black-f

Product Features:
  • Edelbrock products offer improved performance and aesthetics for a broad array of vehicles and engines. ‘Proven performance’ is the philosophy by which Edelbrock was founded and it continues to this day with the highest standards for performance and quali
  • Manual Choke
  • 4 Barrel Count
  • Square Bore
See More

United Carb – Remanufactured Carburetor (Part No.1-153)

Remanufactured Carburetor

from

$219.99
Made in the USA, this remanufactured carburetor is completely disassembled and all internal parts, such as gaskets, gas filters, needle/seats and accelerator plunger cups, are discarded. All metal castings are thoroughly cleaned and restored to OEM (original equipment manufacturer) finish. Then the carburetor is reassembled to OEM-quality standards using all new component parts. Each carburetor is flow tested to simulate actual engine conditions, and all internal and external adjustments are set to OEM specifications.
See More

United Carb – Remanufactured Carburetor 4 Barrel (Part No.1-247)

Remanufactured Carburetor 4 Barrel

from

$308.99
Made in the USA, this remanufactured carburetor is completely disassembled and all internal parts, such as gaskets, gas filters, needle/seats and accelerator plunger cups, are discarded. All metal castings are thoroughly cleaned and restored to OEM (original equipment manufacturer) finish. Then the carburetor is reassembled to OEM-quality standards using all new component parts. Each carburetor is flow tested to simulate actual engine conditions, and all internal and external adjustments are set to OEM specifications.
See More

Edelbrock – Reman Thunder AVS Carb #18259 650 CFM With Manual Choke, Satin Finish (Non-EGR) (Part No.18259)

Reman Thunder AVS Carb #18259 650 CFM With Manual Choke, Satin Finish (Non-EGR)

from

$475.99
Product Features:
  • Satin Finish
  • 4 Barrel
  • Aluminum Body Material
  • Manual Choke Type
  • 650 cfm Maximum Flow Rating
See More

United Carb – Remanufactured Carburetor 4 Barrel (Part No.1-317)

Remanufactured Carburetor 4 Barrel

from

$427.99
Made in the USA, this remanufactured carburetor is completely disassembled and all internal parts, such as gaskets, gas filters, needle/seats and accelerator plunger cups, are discarded. All metal castings are thoroughly cleaned and restored to OEM (original equipment manufacturer) finish. Then the carburetor is reassembled to OEM-quality standards using all new component parts. Each carburetor is flow tested to simulate actual engine conditions, and all internal and external adjustments are set to OEM specifications.
See More

United Carb – Remanufactured Carburetor 4 Barrel (Part No.11-1230)

Remanufactured Carburetor 4 Barrel

from

$394.99
Made in the USA, this remanufactured carburetor is completely disassembled and all internal parts, such as gaskets, gas filters, needle/seats and accelerator plunger cups, are discarded. All metal castings are thoroughly cleaned and restored to OEM (original equipment manufacturer) finish. Then the carburetor is reassembled to OEM-quality standards using all new component parts. Each carburetor is flow tested to simulate actual engine conditions, and all internal and external adjustments are set to OEM specifications.
See More

Edelbrock – Thunder AVS Carburetor #1825 650 CFM With Manual Choke, Satin Finish (Non-EGR) (Part No.1825)

Thunder AVS Carburetor #1825 650 CFM With Manual Choke, Satin Finish (Non-EGR)

from

$427.99
The Edelbrock 1825 Thunder Series AVS 650 CFM manual choke carburetor has been designed and calibrated to deliver optimum off-road performance. Several characteristics make the 1825 Thunder Series AVS 650 CFM manual choke carburetor an outstanding street

Product Features:
  • Spring Loaded Needles/Seat Increase Performance
  • New Qwik-Tune Adjustable Secondary Air Valve
  • Distinctive Black Accented Hardware
  • Lightweight Ball-Burnished Aluminum
  • No Gaskets Below Fuel Level to Prevent Leakage
  • Metering Rod/Step Up Springs Can Be Changed Easily
  • GM/AMC-Style Throttle Linkage
See More

Edelbrock – AVS2 650 CARBURETOR (Part No.1906-BP)

AVS2 650 CARBURETOR

from

$589.99
AVS2 650 CARBURETOR

United Carb – Remanufactured Carburetor 4 Barrel (Part No.1-209)

Remanufactured Carburetor 4 Barrel

from

$521.99
Made in the USA, this remanufactured carburetor is completely disassembled and all internal parts, such as gaskets, gas filters, needle/seats and accelerator plunger cups, are discarded. All metal castings are thoroughly cleaned and restored to OEM (original equipment manufacturer) finish. Then the carburetor is reassembled to OEM-quality standards using all new component parts. Each carburetor is flow tested to simulate actual engine conditions, and all internal and external adjustments are set to OEM specifications.
See More

United Carb – Remanufactured Carburetor 2 Barrel (Part No.1-213)

Remanufactured Carburetor 2 Barrel

from

$362.99
Made in the USA, this remanufactured carburetor is completely disassembled and all internal parts, such as gaskets, gas filters, needle/seats and accelerator plunger cups, are discarded. All metal castings are thoroughly cleaned and restored to OEM (original equipment manufacturer) finish. Then the carburetor is reassembled to OEM-quality standards using all new component parts. Each carburetor is flow tested to simulate actual engine conditions, and all internal and external adjustments are set to OEM specifications.
See More

Edelbrock – Performer 14063 Carburetor: 600 CFM, 4 Barrel, Square Bore, Electric Inlet, Blk (Part No.14063)

Performer 14063 Carburetor: 600 CFM, 4 Barrel, Square Bore, Electric Inlet, Blk

from

$543.99
The Edelbrock 14063 Performer Series 600 CFM electric choke black powder coated carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day.

Product Features:
  • Edelbrock products offer improved performance and aesthetics for a broad array of vehicles and engines. ‘Proven performance’ is the philosophy by which Edelbrock was founded and it continues to this day with the highest standards for performance and quali
  • Electric Choke, Black
  • 4 Barrel Count
  • Square Bore
See More

United Carb – Remanufactured Carburetor 4 Barrel (Part No.1-222)

Remanufactured Carburetor 4 Barrel

from

$308.99
Made in the USA, this remanufactured carburetor is completely disassembled and all internal parts, such as gaskets, gas filters, needle/seats and accelerator plunger cups, are discarded. All metal castings are thoroughly cleaned and restored to OEM (original equipment manufacturer) finish. Then the carburetor is reassembled to OEM-quality standards using all new component parts. Each carburetor is flow tested to simulate actual engine conditions, and all internal and external adjustments are set to OEM specifications.
See More

United Carb – Remanufactured Carburetor 2 Barrel (Part No.14-4197)

Remanufactured Carburetor 2 Barrel

from

$315.99
Made in the USA, this remanufactured carburetor is completely disassembled and all internal parts, such as gaskets, gas filters, needle/seats and accelerator plunger cups, are discarded. All metal castings are thoroughly cleaned and restored to OEM (original equipment manufacturer) finish. Then the carburetor is reassembled to OEM-quality standards using all new component parts. Each carburetor is flow tested to simulate actual engine conditions, and all internal and external adjustments are set to OEM specifications.
See More

1968 Buick LeSabre Carburetor Parts

Maybe you’re in the middle of a full rebuild of that 1968 Buick LeSabre. Maybe you just need a couple of Carburetor Parts. Either way, Advance Auto Parts has 15 different Carburetor Parts in our inventory ranging from $12.99 to $475.99. That means you can find the exact parts or products you need to keep that 1968 Buick LeSabre running smoothly.

Carburetor Parts are only as good as their brand. We stock 3 different brands to make sure you have plenty of trusted parts to choose from for your 1968 Buick LeSabre. Edelbrock, Carquest, and United Carb are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Carburetor Parts for your 1968 Buick LeSabre, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.

So if you’re in the market for aftermarket Carburetor Parts to keep your 1968 Buick LeSabre rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Carburetor Parts Brands To Make Your 1968 Buick LeSabre Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1968 Buick LeSabre demands trusted brand parts and products to keep it running. Many trusted brands of Carburetor Parts make up Advance Auto Parts’ inventory, and all are ready to help make your LeSabre the best it can be. Be sure to browse some of our top Carburetor Parts brands and parts.

FAQs for 1968 Buick LeSabre Carburetor Parts

What are the most purchased Carburetor Parts for the 1968 Buick LeSabre?

Out of 15 Carburetor Parts for the 1968 Buick LeSabre, the most popular in our inventory are:
Standard Flow Carburetor Power Valve #12665 Single Stage 6.5in Hg
from $16.99
This product is not rated
Standard Flow Carburetor Power Valve #12665 Single Stage 6.5in Hg
Carburetor Power Valves
Non-Adjustable Carburetor Needle and Seat #12605 Size .110 With Viton Tip
from $20.99
This product is not rated
Non-Adjustable Carburetor Needle and Seat #12605 Size .110 With Viton Tip
Carburetor Needle and Seats
Adjustable Carburetor Needle and Seat #12602 Size .097 With Viton Tip
from $18.99
This product is not rated
Adjustable Carburetor Needle and Seat #12602 Size .097 With Viton Tip
Carburetor Needle and Seats