1968 Buick Electra Differentials

Name: Ring & Pinion Gear Set For GM 8.5" In A 4.56 Ratio
Brand: USA Standard Gear
SKU: 36218
Price: 274.99 USD

Find your specific 1968 Buick Electra original or aftermarket Differentials below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.

Essential 1968 Buick Electra Differentials

from

$274.99

USA Standard ring & pinion sets are the right choice to add confidence to your install. USA Standard Gear offers a full line of ring & pinion sets for a variety of common & hard to find applications. USA standard gear offers a standard one year warranty against defects on their ring & pinion sets.

Product Features:

Fits GM 8.5″ and 8.6″
8.50″ ring gear diameter
30 spline pinion
10 ring gear bolts
4.56 ratio

from

$239.99

Yukon Bearing installation kits are perfect for shops & builders who have shims on the shelf and are looking to save cost over a Master Overhaul kit. This kit uses Timken bearings and races along with all high quality small parts. kit includes carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve (if applicable), oil baffles and slingers (if applicable), marking compound and brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your ring & pinion set.

Product Features:

Fits 1981 and down GM 7.5″
Included are carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve, marking compound and brush.

from

$173.99

Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:

Fits GM 8.5″ rear
Included are pinion bearings and races, pinion seal, crush sleeve , complete pinion shim kit, and marking compound with brush.

from

$1.99

Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:

All products are designed to meet or exceed OE quality, form, fit and funtion.

from

$14.29

Product Features:

Brand may vary by location

from

$544.99

For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.

Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles.

Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction.

Powertrax® = Extreme Traction Systems!

from

$9.29

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Unsurpassed quality you can trust
Validated for fit, form and function
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$234.99

Yukon cast yoke for GM 8.5″ with a 1350 U/joint size. 3.625″ snap ring span, 1.188″ cap diameter. Outside snap ring. This yoke uses straps. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:

Fits GM 8.5″
30 spline
1350 u-joint size
Outside snap ring design
3.625″ snap ring span
1.188″ cap diameter
Strap style

from

$43.99

National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Designed to repair damaged, grooved or worn shafts
Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
Easy to install with removable flange and installation tool
Installation tool reduces sleeve distortion and allows for installation without removal from the shaft

from

$7.79

Value-priced seal meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$49.99

Product Features:

MINI INSTALL KIT GM 7.5

from

$1566.99

21 Piece bearing race driver set. (Box wt: 140lbs) No return.

Product Features:

Bearing race driver set
21 pieces
All steel construction

from

$5.99

Replacement Crush Sleeve for GM 7.6″ IRS, 8.5″, 8.6″, 8.75″, 8.875″ & Nissan Titan rear. Approx 0.620″ long.

Product Features:

Crush sleeve for Jeep JK rear, GM 7.6″ IRS, 8.5″ and 8.6″ and Nissan Titan rear
0.620″ tall

from

$689.99

The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to most standard one ton applications. This unit is works with differentials up to one-ton applcations. It is not compatible with Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

Product Features:

Carrier bearing puller
Works with an impact gun to safely and easliy remove carrrier bearings
Not compatible with Dana 70HD, Dana 80, Ford 10.25″ and 10.5″ or Gm and Chrysler 11.5″ applications

from

$279.99

USA Standard Master Overhaul kits let you finish your install with confidence. This kit uses Koyo bearings and races. Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), threading locking compound, marking compound with brush and gasket.

Product Features:

Fits 8.2″ Buick, Oldsmobile and Pontiac
Uses Koyo bearings and races
Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve, thread locker, marking compound with brush and gasket.

from

$551.99

Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles.

Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction.

Powertrax® = Extreme Traction Systems!

from

$35.99

DIFF COVER KIT

from

$19.99

Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:

All products are designed to meet or exceed OE quality, form, fit and funtion.

from

$101.99

Product Features:

MINI SPOOL GM 7 1/2″ 28 SPLINE

from

$4.99

3/8″ ring gear bolt washer for GM 12 bolt car & truck, 8.2 BOP & more.

Product Features:

Ring gear bolt washer for GM 12 bolt car and truck, 1955-1964 passenger car, 1963-1979 Corvette and 8.2″ Buick, Oldsmobile and Pontiac

from

$109.99

Yukon Carrier installation kits are great, low cost kit for carrier changes such as Positraction or locker upgrades. Carrier installation kit for GM 8.2″ & 8.5″ differential. This kit contains carrier bearings, races and shims.

Product Features:

Fits GM 7.5″, 7.625″ 8.2″ and 8.5″
Includes carrier bearings and races and “super” carrier shim kit

from

$89.99

GM Genuine Parts Differential Bearings are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These bearings are low friction rotating elements that support the drive axle differential carrier within the axle or final drive housing. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Low friction rotating elements that support the drive axle differential carrier within the axle or final drive housing
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$5.99

Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:

All products are designed to meet or exceed OE quality, form, fit and funtion.

from

$27.99

8.25″ IFS, 8.5″, 12P, 7.5″ F, 8.8″ F, 8.25″ Chrysler pinion shim kit.

Product Features:

Pinion depth shims for GM 8.25″ IFS, 8.5″, 8.6″, 12 bolt passenger car, Ford 7.5″ and 8.8″, Chrysler 8.25″

from

$11.99

Pinion nut for GM 12 bolt car & truck, 55-62 car & truck, 8.2″, 8.2″ Buick/Olds/Pontiac & 63-79 Corvette. 1 1/8″ socket, 7/8″ x 16 thread.

Product Features:

Pinion nut for GM 12 bolt car and truck, 8.2″, 8.2″ Buick, Oldsmobile and Pontiac and 1963-1979 Corvette
7/8″ x 16 thread
1 1/8″ socket

from

$8.49

Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner’s circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.

from

$137.99

Redline Synthetic “Shock Proof” Oil. 4 Quarts.

Product Features:

Includes four quarts of Redline Shockproof oil

from

$35.99

Valvoline DEX/MERC ATF is a high-quality transmission fluid formulated to meet the challenging demands many automatic transmissions. Its responsive low-temperature fluidity is beneficial in both electronic and hydraulic controlled transmissions and transaxles. Recommended for use in the following applications: MERCON®, DEXRON®-III, Ford M2C138-CJ and M2C166-H, Allison C-4 and TES-389, and Caterpillar TO-2.

Product Features:

Formulated with premium base stocks and advanced additive technology to meet the challenging demands of automatic transmissions.
Enhanced anti-shudder protection for smooth shifting and maximum power transfer
Developed with anti-wear technology to help improve transmission durability
Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures

Popular 1968 Buick Electra Differentials Categories

Differential Oil

Rear Differential Cover Gaskets

Differential Open Unit and Components

Differential Covers

Differential Bearings

Differential Pinion Pilot Bearings

Differential Bearing Kits

Front Differential Pinion Bearings

Differential Rebuild Kits

Differential Carrier Shim Kits

Differential Pinion Seals

Differential Ring and Pinions

Differential End Yokes

Differential Spools

Differential Carrier Bearings

Differential Pinion Bearing Kits

Complete Differentials

Differential Ring Gear Bolts

Bearing Race Drivers

Differential Crush Sleeves

Differential Side Bearing Spacers

Differential Pinion Shims

Differential Pinion Shaft Nuts

Differential Gear Install Kits

Differential Lock Washers

Maybe you’re in the middle of a full rebuild of that 1968 Buick Electra. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 91 different Differentials in our inventory ranging from $2.69 to $1,566.99. That means you can find the exact parts or products you need to keep that 1968 Buick Electra running smoothly.

Differentials are only as good as their brand. We stock 11 different brands to make sure you have plenty of trusted parts to choose from for your 1968 Buick Electra. Valvoline, Yukon Gear, and Motive Gear are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Differentials for your 1968 Buick Electra, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 48 reviews in this category, some of the top rated parts include Differential Pinion Shim Kit with 5.0 stars.

So if you’re in the market for aftermarket Differentials to keep your 1968 Buick Electra rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Differentials Brands To Make Your 1968 Buick Electra Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1968 Buick Electra demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your Electra the best it can be. Be sure to browse some of our top Differentials brands and parts.

Popular Valvoline Differentials

We carry Valvoline parts in our stock across Differential Oil categories, plus more. For a 1968 Buick Electra, our most popular Valvoline Differentials include:

from $14.49

(2)

DEXRON – VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart

Differential Oil

from $35.99

(17)

DEX/MERC Automatic Transmission Fluid, 1 Gallon

Differential Oil

FAQs for 1968 Buick Electra Differentials

What are the most purchased Differentials for the 1968 Buick Electra?

Out of 91 Differentials for the 1968 Buick Electra, the most popular in our inventory are:

from $57.99

This product is not rated

3 Qt – 80W90 Conventional Gear Oil With Posi Additive

Differential Oil

from $8.49

(3)

Differential Carrier Shim Kit

Differential Carrier Shim Kits

from $8.49

(1)

Pinion Nut

Differential Pinion Shaft Nuts

What are the top-rated 1968 Buick Electra Differentials?

Top-rated Differentials for your 1968 Buick Electra based on customer reviews/ratings are:

from $7.49

(1)

Differential Pinion Shim Kit

“good product”

1968 Buick Electra Differentials

More 1968 Buick Electra Differentials

Essential 1968 Buick Electra Differentials

USA Standard Gear – Ring & Pinion Gear Set For GM 8.5" In A 4.56 Ratio (Part No.36218)

Yukon Gear – Bearing Install Kit For ’81 And Older GM 7.5" Differential (Part No.11061)

Yukon Gear – Pinion Install Kit For GM 8.5" Differential (Part No.13069)

Pro-King – Differential Ring Gear Bolt (Part No.742G935)

Driveworks – Tapered Roller Bearing (Part No.S-HM-88648)

Powertrax – No-Slip Traction System (Part No.9207822801)

Felpro – Differential Cover Gasket (Part No.RDS 55009)

Yukon Gear – Cast Yoke For GM 8.5" With A 1350 U/Joint Size (Part No.41092)

National – Shaft Repair Sleeve (Part No.99193)

Driveworks – Oil Seal (Part No.S-2043)

Motive Gear – Differential Gear Install Kit (Part No.GM7.5IK)

Yukon Gear – Bearing Race Driver Set, 21 Piece (Part No.56030)

Yukon Gear – Crush Sleeve For GM 7.6" IRS, 8.5", 8.6", 8.75", 8.875" & Nissan Titan Rear – Approx 0.620" Long (Part No.33097)

Yukon Gear – The Carrier Bearing Puller (Part No.56034)

USA Standard Gear – Master Overhaul Kit for the 8.2" Buick, Olds, Pontiac Differential (Part No.37054)

Powertrax – No-Slip Traction System (Part No.9207883005)

ATP – DIFF COVER KIT (Part No.111101)

Pro-King – Shim Kit (Part No.741A200)

Motive Gear – Differential Mini Spool (Part No.MS7.5-28)

Yukon Gear – 3/8" Ring Gear Bolt Washer For GM 12 Bolt Car & Truck, 8.2 Bop & More (Part No.33347)

Yukon Gear – 8.5" & 8.2" GM Carrier Installation Kit (Part No.57008)

GM Genuine Parts – Side Differential Bearing (Part No.S1380)

Pro-King – Differential Pinion Shim Kit (Part No.742G202)

Yukon Gear – Pinion Depth Shims For GM 8.25" IFS, 8.5", 12 Bolt Car, Ford 8.8" & Chrysler 8.25" (Part No.55009)

Yukon Gear – Pinion Nut (Part No.33150)

Motive Gear – Pinion Nut (Part No.1260823)

Yukon Gear – Redline Synthetic "Shock Proof" Oil – 4 Quarts (Part No.15004)

Valvoline – DEX/MERC Automatic Transmission Fluid, 1 Gallon (Part No.773636)

Popular 1968 Buick Electra Differentials Categories