1967 Toyota Land Cruiser Differentials

Essential 1967 Toyota Land Cruiser Differentials

Yukon Gear – Bearing Install Kit For ’90 & Older Toyota Landcruiser Differential (Part No.11090)

Bearing Install Kit For '90 & Older Toyota Landcruiser Differential

from

$364.99
Yukon Bearing installation kits are perfect for shops & builders who have shims on the shelf and are looking to save cost over a Master Overhaul kit. This kit uses Timken bearings and races along with all high quality small parts. kit includes carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve (if applicable), oil baffles and slingers (if applicable), marking compound and brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your ring & pinion set.

Product Features:
  • Fits 1990 and down Toyota Landcruiser
  • Included are carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve, marking compound and brush.
See More

Yukon Gear – Toyota Landcruiser Ring Gear Nut For Ring Gear Bolt (Part No.33062)

Toyota Landcruiser Ring Gear Nut For Ring Gear Bolt

from

$8.99
Toyota Landcruiser ring gear nut for ring gear bolt.

Product Features:
  • Ring gear nut
  • Fits Toyota Landcruiser
See More

Valvoline – Transfer Case Fluid, 1 Quart (Part No.855459)

Transfer Case Fluid, 1 Quart

from

$14.99
Valvoline Multi-Vehicle Transfer Case Fluid is a full synthetic product meeting the performance needs for transfer cases recommending Ford XL-12 and GM Auto Trak II specifications or ATF fluids (DEX/MERC, ATF +4, etc).

Product Features:
  • Recommended for use in most Ford, GM and FCA (Dodge, Jeep) models
  • Formulated to help prevent gear wear and protect against rust and corrosion
  • Formulated to deliver enhanced protection against deposits
  • Helps provide better protection during extreme operating conditions
See More

Yukon Gear – Landcruiser Standard Open Cross Pin Shaft (Part No.33419)

Landcruiser Standard Open Cross Pin Shaft

from

$32.99
Product Features:
  • Cross pin shaft
  • Fits Toyota Landcruiser
See More

Yukon Gear – Minor Install Kit For Toyota Landcruiser Differential (Part No.12074)

Minor Install Kit For Toyota Landcruiser Differential

from

$103.99
Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up. kit includes a pinion seal, crush sleeve (if applicable), complete shim kit, marking compound and brush. No side shims.

Product Features:
  • Fits standard rotation Toyota Landcruiser
  • Included are a pinion seal, crush sleeve, complete shim kit, marking compound and brush.
See More

Yukon Gear – Landcruiser Standard Open Side Gear Thrust Washer (Part No.33400)

Landcruiser Standard Open Side Gear Thrust Washer

from

$28.99
Landcruiser standard Open side gear Thrust washer.

Product Features:
  • Side gear thrust washer
  • Fits Toyota Landcrusier
See More

NOK – Pinion Seal (Part No.J7010163834NOK)

Pinion Seal

from

$13.72
Pinion Seal

Felpro – Differential Carrier Gasket (Part No.RDS 55429)

Differential Carrier Gasket

from

$11.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Yukon Gear – Crush Sleeve (Part No.33118)

Crush Sleeve

from

$13.99
Crush Sleeve for Toyota V6, Landcruiser reverse front & Tacoma/T100 with factory locker, 1.820″ long.

Product Features:
  • Crush sleeve for Toyota V6, Landcruiser reverse rotation front and Tacoma/T100 with factory locker
  • 1.820″ tall
See More

Yukon Gear – Toyota 7.5", 8", & V6 Ring Gear Bolt Retainer Plate (Part No.33061)

Toyota 7.5", 8", & V6 Ring Gear Bolt Retainer Plate

from

$6.99
Toyota 7.5″, 8″, & V6 ring gear bolt retainer plate (5 needed).

Product Features:
  • Ring gear bolt retainer plate for Toyota 7.5″ 8″ and 8″ V6
  • 5 needed
See More

Yukon Gear – Replacement Pinion Depth Shims For Dana 60, 61 & D70-U (Part No.55012)

Replacement Pinion Depth Shims For Dana 60, 61 & D70-U

from

$17.99
Product Features:
  • Pinion depth shims for Dana Spicer 60 and 70U
See More

Yukon Gear – Bearing Race Driver (Part No.56005)

Bearing Race Driver

from

$126.99
Bearing race driver front Toyota 7.5″, 8″, Landcruiser, and the Suzuki Samurai. No return. (TOY30306).

Product Features:
  • Bearing race driver
  • Fits 30306 race
  • All steel construction
See More

Motive Gear – Differential Carrier Shim Kit (Part No.GM9.5SSK)

Differential Carrier Shim Kit

from

$21.99


Product Features:
  • KIT SHIM SIDE 9.5″ GM
See More

Yukon Gear – Toyota Landcruiser Pinion Nut, Coarse Spline (Part No.33158)

Toyota Landcruiser Pinion Nut, Coarse Spline

from

$15.99
Toyota Landcruiser pinion nut, coarse spline, LARGE. 22mm x 1.5mm.

Product Features:
  • Pinion nut
  • Fits Toyota Landcruiser with 10 spline pinion
See More

FAG US – CONE (Part No.KJLM506849-A)

CONE

from

$51.99
CONE

Yukon Gear – Outer Oil Slinger (Part No.33025)

Outer Oil Slinger

from

$10.99
Outer oil slinger for Toyota 7.5″, 8″, V6 & Landcruiser.

Product Features:
  • Outer oil slinger for Toyota 7.5″, 8″, V6 and Landcruiser
See More

Yukon Gear – Landcruiser Standard Open Pinion Gear Thrust Washer (Part No.33394)

Landcruiser Standard Open Pinion Gear Thrust Washer

from

$31.99
Product Features:
  • Pinion gear thrust washer
  • Fits Toyota Landcrusier
See More

Yukon Gear – Grizzly Locker For Toyota Landcruiser, 30 Spline (Part No.28032)

Grizzly Locker For Toyota Landcruiser, 30 Spline

from

$1099.99
The Yukon Grizzly Locker is the ultimate in locking differentials for street, off-road, & drag racing. Grizzly Lockers provide 100% power to both tires, while still allowing for disengagement while negotiating turns. The Yukon Grizzly locker is a mechanical locking differential. It features a forged case and 8620 internals for maximum strength. It’s patented design reduces common locker failures. All units assembled in the USA! All Grizzly Lockers are backed by the best warranty in the business! Yukon covers the replacement unit and covers any collaterally damaged parts.

Product Features:
  • Fits Toyota 9.5″ Landcruiser with 30 spline axles
  • Patented internal design reduces common locker failures
  • 8620 internals for added strength
  • Assembled in the USA
See More

Yukon Gear – Yoke For ’78 To ’84 Toyota Lancruiser With 27 Spline Pinion (Part No.41110)

Yoke For '78 To '84 Toyota Lancruiser With 27 Spline Pinion

from

$169.99
Yukon yoke for ’78 to ’84 Toyota Lancruiser with 27 spline pinion. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:
  • Fits 1978-1984 Toyota Landcruiser
  • 27 spline
See More

Yukon Gear – Small Hole Yoke For ’82 And Older Toyota 8" And Landcruiser With 27 Spline (Part No.41102)

Small Hole Yoke For '82 And Older Toyota 8" And Landcruiser With 27 Spline

from

$55.99
Yukon small hole yoke for ’82 and older Toyota 8″ and Landcruiser with 27 spline. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:
  • Fits 1982 and down Toyota Landcruiser
  • 27 spline
See More

Needa Parts – Standard Engine Oil Drain Plug: 9/16-18 Thread, 0.75 " Head, 1 Pack (Part No.090-030)

Standard Engine Oil Drain Plug: 9/16-18 Thread, 0.75 " Head, 1 Pack

from

$6.79
This engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles. It is engineered to replace a missing or damaged plug & help ensure a secure seal.

Product Features:
  • Direct replacement – this engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles.
  • Ideal solution – engineered to replace a missing or damaged plug and help ensure a secure seal
  • Durable construction – designed and manufactured to strict specifications for reliable performance
  • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
See More

USA Standard Gear – Ring & Pinion Gear Set For Toyota Landcruiser In A 5.29 Ratio (Part No.36259)

Ring & Pinion Gear Set For Toyota Landcruiser In A 5.29 Ratio

from

$447.99
USA Standard ring & pinion sets are the right choice to add confidence to your install. USA Standard Gear offers a full line of ring & pinion sets for a variety of common & hard to find applications. USA standard gear offers a standard one year warranty against defects on their ring & pinion sets.

Product Features:
  • Fits Toyota 9.5″ Landcruiser
  • 9.50″ ring gear diameter
  • 27 spline pinion
  • 10 ring gear bolts
  • 5.29 ratio
See More

Yukon Gear – High Performance Ring & Pinion Gear Set For Toyota Land Cruiser In A 4.56 Ratio (Part No.24550)

High Performance Ring & Pinion Gear Set For Toyota Land Cruiser In A 4.56 Ratio

from

$429.99
Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses the latest designs and manufacturing technologies to provide a quiet running gear that is strong and easy to set up. All Yukon ring & pinion sets come standard with a one-year warranty. A yoke and ring gear bolt kit are required for this gear set.

Product Features:
  • Fits Toyota 9.5″ Landcruiser
  • 9.50″ ring gear diameter
  • 27 spline pinion
  • 10 ring gear bolts
  • 4.56 ratio
See More

USA Standard Gear – Ring & Pinion Gear Set For Toyota Landcruiser In A 4.88 Ratio (Part No.36258)

Ring & Pinion Gear Set For Toyota Landcruiser In A 4.88 Ratio

from

$469.99
USA Standard ring & pinion sets are the right choice to add confidence to your install. USA Standard Gear offers a full line of ring & pinion sets for a variety of common & hard to find applications. USA standard gear offers a standard one year warranty against defects on their ring & pinion sets.

Product Features:
  • Fits Toyota 9.5″ Landcruiser
  • 9.50″ ring gear diameter
  • 27 spline pinion
  • 10 ring gear bolts
  • 4.88 ratio
See More

Yukon Gear – Pinion Install Kit For Toyota Landcruiser Differential (Part No.13091)

Pinion Install Kit For Toyota Landcruiser Differential

from

$274.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses high quality bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:
  • Fits standard rotation Toyota Landcruiser
  • Included are pinion bearings and races, pinion seal, crush sleeve, complete pinion shim kit, and marking compound with brush.
See More

Yukon Gear – Pinion Install Kit For ’91-’97 Toyota Landcruiser Reverse Rotation Front (Part No.13104)

Pinion Install Kit For '91-'97 Toyota Landcruiser Reverse Rotation Front

from

$329.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:
  • Fits reverse rotation Toyota Landcruiser
  • Included are pinion bearings and races, pinion seal, crush sleeve, complete pinion shim kit, and marking compound with brush.
See More

1967 Toyota Land Cruiser Differentials

Maybe you’re in the middle of a full rebuild of that 1967 Toyota Land Cruiser. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 43 different Differentials in our inventory ranging from $5.49 to $1,566.99. That means you can find the exact parts or products you need to keep that 1967 Toyota Land Cruiser running smoothly.

Differentials are only as good as their brand. We stock 7 different brands to make sure you have plenty of trusted parts to choose from for your 1967 Toyota Land Cruiser. Yukon Gear, National, and Motive Gear are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Differentials for your 1967 Toyota Land Cruiser, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.

So if you’re in the market for aftermarket Differentials to keep your 1967 Toyota Land Cruiser rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Differentials Brands To Make Your 1967 Toyota Land Cruiser Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1967 Toyota Land Cruiser demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your Land Cruiser the best it can be. Be sure to browse some of our top Differentials brands and parts.

FAQs for 1967 Toyota Land Cruiser Differentials

What are the most purchased Differentials for the 1967 Toyota Land Cruiser?

Out of 43 Differentials for the 1967 Toyota Land Cruiser, the most popular in our inventory are:
3 Qt - 80W90 Conventional Gear Oil With Posi Additive
from $57.99
This product is not rated
3 Qt – 80W90 Conventional Gear Oil With Posi Additive
Differential Oil
Differential Crush Sleeve
from $5.49
This product is not rated
Differential Crush Sleeve
Differential Crush Sleeves
Standard Engine Oil Drain Plug: 9/16-18 Thread, 0.75 " Head, 1 Pack
from $6.79
This product is not rated
Standard Engine Oil Drain Plug: 9/16-18 Thread, 0.75 " Head, 1 Pack
Differential Drain Plugs