1967 Pontiac Tempest Alternator Parts

The charging system has been required as long as we have had a need for an electrical system and from research it’s been since the requirement of horns in motor vehicle in the early 1900’s. An alternator is a voltage generator that uses mechanical energy to rotate a set of magnets within a field of windings called a stator. The alternating current (AC) voltage created by the spinning magnetic field is converted into a usable direct current (DC) voltage with a rectifier and then regulated by a voltage regulator so that the voltage level in the electrical system stays within a specific operating range. The alternator provides all the voltage needed to operate a vehicle, the battery is only used as a reserve for heavier load conditions, as a voltage source for the engine starting system, and to supply a small amount of voltage to the electromagnets in the alternator which boosts the magnetic field in the alternator and increases voltage output.

Product Features:

• Application matched components ensure the charging system can be returned to like new condition.

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

• Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.

Carquest Premium alternators are premium constructed, original equipment (O.E.) replacement parts with industry-leading limited warranties. Our Carquest Premium alternators are designed to meet or exceed OE specifications for fit, form and function. Our alternators are remanufactured by an IATF/TS 16949 certified supplier that meets the highest standards achievable. We replace all wear components (brushes, bushings and bearings) with new components to ensure long-life. All critical components are electronically tested during assembly and the entire unit is 100% tested, ensuring proper performance backed by an industry-leading limited warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.

Product Features:

• 
  
  

Product Features:

• Designed to meet or exceed OE specifications for fit, form and function
• Remanufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
• Regulators and rectifiers are 100% electronically load tested for reliable charging performance
• 100% new OE-quality brushes and bearings are used to ensure long service life
• Rotors and stators are load tested and double insulated for maximum charging performance
• Slip rings are precision polished for maximum brush contact and service life
• Application-specific technical bulletins included where applicable
• All units are 100% triple tested to ensure quality and performance
• Technical support team staffed with ASE Certified Technicians: 1-800-228-9672

The remanufactured Mr. Gasket chrome alternator delivers exceptional dependability, exceeding original equipment specifications to ensure reliable performance. Designed to fit most GM vehicles from 1966 to 1972, this alternator features a GM 10DN style with a durable chrome-plated finish that adds a sleek touch under the hood. With an impressive 80-amp output and 12V voltage, it provides robust power for your vehicle’s electrical system. The 6.6″ bolt spacing ensures easy installation, while the included 1-groove V-belt pulley enhances compatibility with OEM-style regulators. Whether you’re restoring a classic or upgrading your ride, this alternator combines functionality, durability, and style to meet your automotive needs.

Product Features:

• Fits Most 1966-’72 GM Vehicles
• Bolt Spacing 6.6″
• 80 Amps
• GM 10DN Style Alternator
• Chrome Plated Finish
• includes V-Belt Pulley – 1-Groove
• Use with OEM Style Regulator

Elevate your vehicle’s performance with this 150 Amp Alternator from Powermaster, designed for street applications including Muscle Cars, Classics, Street Rods, and daily drivers. Engineered with a 12si style and a smooth die-cast housing featuring a teardrop design, this alternator delivers both functionality and a sleek, custom billet look at an affordable price. Its high-ampere GM one-wire setup ensures efficient power delivery, while the smooth back with special Powermaster vents enhances pull-through cooling for optimal performance. The gold battery post and Proof of Performance tag add a touch of reliability and quality assurance. With the largest selection of fans, pulleys, nose cones, and baffle plates in the industry, plus an optional custom high-volume fan, this alternator offers unmatched versatility and customization. Whether you’re upgrading for style or performance, this unit combines durability, efficiency, and value to meet your automotive needs.

Product Features:

• 
  
  

Product Features:

• 12si Style
• The Ultimate Custom Billet Look At Affordable Prices
• Smooth Die Cast Housing With Teardrop Design
• High Ampere Gm One Wire
• Smooth Back With Special Powermaster Vents For Pull Through Cooling
• Gold Battery Post. Proof Of Performance Tag
• Largest Selection Of Fans, Pulleys, Nose Cones, And Baffle Plates In The Industry. Optional Custom Hv (high Volume) Fan

Elevate your vehicle’s performance with this 150 Amp Alternator from Powermaster, designed for street applications including muscle cars, classics, street rods, and daily drivers. Featuring a sleek 12si style with a custom billet look, this alternator combines aesthetics with functionality at an affordable price. Its smooth die-cast housing with a teardrop design and special Powermaster vents ensures efficient pull-through cooling, while the high-amp GM one-wire setup simplifies installation. The gold battery post and Proof of Performance tag add a touch of reliability and quality assurance. With the largest selection of fans, pulleys, nose cones, and baffle plates in the industry, plus an optional custom high-volume fan, this alternator offers unmatched versatility and customization. Built with premium internal components, it delivers maximum efficiency and durability, making it the ultimate upgrade for your vehicle’s electrical system.

Product Features:

• 
  
  

Product Features:

• 12si Style
• The Ultimate Custom Billet Look At Affordable Prices
• Smooth Die Cast Housing With Teardrop Design
• High Ampere Gm One Wire
• Smooth Back With Special Powermaster Vents For Pull Through Cooling
• Gold Battery Post. Proof Of Performance Tag
• Largest Selection Of Fans, Pulleys, Nose Cones, And Baffle Plates In The Industry. Optional Custom Hv (high Volume) Fan

Carquest Starters with 100% NEW construction will restore hard working vehicles to exceed OE specified performance & endurance. All new units and components offer unmatched performance, reduce downtime & customer comebacks. Carquest HD alternators are primed to keep you moving forward. Built to perform in severe duty environments where consistent efficient high outputs are required.

Product Features:

• High quality components form the foundation our parts are built from. Transpo¿s innovative and high quality electronic technologies for internal components are incorporated to achieve high performance outputs.
• High quality components form the foundation our parts are built from. Transpo┐s innovative and high quality electronic technologies for internal components are incorporated to achieve high performance outputs.
• Power & Efficiency are designed into every component. No matter the ambient temperature, starters will provide maximum cranking power to get engines running.
• Connectors and power transmission components are highly resistant to extreme moisture environments because we use nickel plated contactors and double armature coating. We maintain a rigorous test schedule with endurance, salt spray, dirt and grime and out
• Integrated magnetic switch provides protection against weak power from batteries.
• Over-Crank Protection (OCP) Monitors heat in starter from over cranking & shuts down starter to prevent burning
• Precision design and machining are the Extreme vibration failure solution. Vehicles often perform in adverse conditions like extreme temperatures that create tolerance shifts that produce high frequency vibration, which leads to resistance in power transf
• Load dump protection ensures transient voltage spikes do not damage transistor
• Improved power transmission with lower engine speed keeps accessories and powered implements running at maximum output without additional load to the engine.

Product Features:

• BUILT TO LAST: Advanced heat treatment process for strength
• PREMIUM MATERIALS: Precision manufactured using premium-grade steel for lasting performance and extended bearing life
• RELIABLE PERFORMANCE: Element size and quantity are engineered to meet or exceed the load rating of OE bearings
• COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
• RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on

Product Features:

• RIGHT TYPE: Needle bearings are application-specific for the repair occasion, using either caged or full complement designs
• PREMIUM MATERIALS: Precision manufactured using high-quality materials for outstanding durability and performance
• OE-STYLE DESIGN: Engineered to meet OE specifications
• COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
• RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on

We develop and produce high-quality roller bearings, spherical bearings, and plain bearings worldwide for a wide range of applications.

Product Features:

• Radial Ball Bearing, Both Sides Shield.
• Coverage of classic and new high-tech solutions for the best system coverage