1967 Pontiac LeMans Ignition Coils and Boots
More 1967 Pontiac LeMans Ignition Coils and Boots
Find your specific 1967 Pontiac LeMans original or aftermarket Ignition Coils and Boots below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 1967 Pontiac LeMans Ignition Coils and Boots
Accel – Remote Mount Super Coil, GM (Part No.140011)
from
$67.99
Engineered with optimized low resistance, high turns ratio windings around an M36 high silicone magnetic steel E-core for higher energy and voltage outputs. Results in quicker starts, improved idle quality, crisper throttle response and more high RPM powe
Product Features:
See More
Product Features:
- 10-15% More Energy
- Direct Plug In Replacement Direct OE Fit
- Advanced Bobbin Technology
- Highly Specialized Silicone Magnetic Steel Cores
- Standard Motor Products SMP Dr-37
- MSD 8226
- Resist Corrosion
- W/New Mounting Hardware
Delphi – Ignition Coil: Meets or Exceeds Original Equipment Design, 1 Piece (Part No.GN10048)
from
$35.99
Every single Delphi ignition coil is designed and endurance tested using high quality materials. This ensures fast starts, consistent engine performance and optimized fuel efficiency. We makes more than 10 million ignition coils for North America each year, and each one is engineered to OE design specifications for vehicles from Ford, Toyota, Nissan, Lexus, GM, Mazda, Chrysler, Subaru, Acura and more.
Product Features:
See More
Product Features:
- Delphi coils provide OE performance, durability and electromagnetic capacity level requirements
- Delphi ignition coils are designed to insert power into spark plugs to ensure fast starts, consistent engine performance and optimized fuel efficiency
- Delphi uses smart winding process techniques to controls wire lengths, keeping voltage the same
- We manufacture our ignition coils with a high quality wire coating that resists imperfections that lead to failure
Mallory – Universal Street Performance Ignition Coil (Part No.29219)
from
$68.99
Universal, 12-volt coil features an oil-filled design and arc resistant alkyd top for superior performance, insulation and cooling. The internal design of this coil eliminates the need for a separate ballast resistor. This coil is specifically designed to deliver optimum performance when used with: Mallory UNILITE or magnetic breaker less ignitions Mallory HYFIRE IV electronic ignition controls, and Mallory electronic ignition conversion kits.
Product Features:
See More
Product Features:
- 12 Volt Coil
- Oil-Filled Design
- Arch Resistant Alkyd Top
- Designed To Deliver Optimum Performance
WSO – Ignition Coil (Part No.F3000204502WSO)
from
$30.06
WORLD SOURCEONE ignition coils are designed to operate reliably and dependably under all operating conditions and engine rpm ranges, providing the highest engine performance, low exhaust emissions, and fuel economy objectives. Every WSO ignition coil is developed and designed for its specific application, and engineered for maximum performance.
Product Features:
See More
Product Features:
- OE-Equivalent and a direct fit application
- Superior, reliable performance compared to competitive products
- Lower cost alternative to original equipment
- No additional time consuming steps needed for installation
- Factory original equipment connectors
- Improved coil efficiency reduces the need to generate excessive high voltage
- Designed to provide durability and performance
- Noise abatement technology to eliminate audible coil noise
- Lower primary inductance provides high-speed performance
- Maximum available voltage under all operating conditions
- TS 16949 Certification
NGK – Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No.49035)
from
$35.99
NGK ignition coils are manufactured to meet or exceed OE standards for the highest durability and operational performance, so they can be installed with confidence. NGK and their family of automotive products have over 80 year’s experience and are driven by extreme dedication to innovation, performance and quality. Developed and rigorously tested in our ISO 17025 accredited test lab under the most extreme conditions, NGK’s coil designs will outperform all others – far beyond operational environments a vehicle would actually experience
Product Features:
See More
Product Features:
- OE QUALITY: Vacuum-sealed premium epoxy resin and thermoplastic coil housings provide superior dielectric strength, voltage insulation and durability
- OPTIMAL PERFORMANCE: Precision coil windings and laminations maximize outputs, custom NGK ASIC chipset optimizes efficiency, prevents component damage
- EASE OF INSTALLATION: Includes mounting hardware and necessary components required for certain applications to ensure worry-free installation
- THE NGK DIFFERENCE: Featuring superior materials and design enhancements.
- EXTENSIVE TESTING: NGK ignition coils must pass extreme testing during manufacturing to ensure the highest quality and durability standards are met
- PRODUCT ENGINEERING: Advanced flow and stress modeling systems preemptively identify and avoid common failure points found in OE and competitor coils
Carquest Premium – Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No.EBC1497)
from
$38.99
Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.
Product Features:
See More
Product Features:
- Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
- 100% pure copper precision-wound windings increase coil life and ensure reliability and maximum coil output when needed.
- Highly conductive aluminum alloy secondary terminal guarantees secondary coil terminals will not oxidize (rust), will provide excellent conductivity, extended coil life and will not cause excessive stress on the primary control circuit.
- 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
- 100% end-of-line tested to ensure confidence and product reliability, every time.
Carquest Premium – Ignition Coil: Meets or Exceeds OE Specifications, 1 Count (Part No.EBC1483)
from
$33.99
Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.
Product Features:
See More
Product Features:
- Built by IATF 16949 certified manufacturers for consistent durability
- Coil drivers match OE for current limit, electrostatic discharge (ESD) protection and multi-spark
- Segmented secondary bobbins to distribute high voltage and prevent shorting
- Extensive design validation testing to ensure long-lasting reliability
- 100% end-of-line tested to ensure proper performance
- Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
ACDelco – Ignition Coil (Part No.D504A)
from
$99.99
An ACDelco Professional, premium aftermarket Ignition Coil is a high quality replacement for many vehicles on the road today. It increases electrical system voltage to help ignite the air/fuel mixture as the starting and charging system starts the engine, maintains the battery’s charge, and provides power to the electrical accessories while the engine is running. An ACDelco Professional Ignition Coil uses pure copper windings to improve durability and provides higher resistance to internal shorts and dielectric breakdown. Because the number and shape of the laminations determine the output characteristics of an ignition coil, ACDelco ensures that the silicone steel plates surrounding the ignition coil correctly match the original part size and number. Since steel laminations work best when they are new, shiny, and clean, ACDelco laminations are coated to hinder corrosion and many feature molded plastic protection to help ensure that nothing is exposed. This premium aftermarket replacement ignition coil is manufactured to meet your expectations for fit, form, and function.
Product Features:
See More
Product Features:
- High quality coated windings to improve durability and provide protection against internal shorts and dielectric breakdown
- Silicone steel plates surrounding the ignition coil correctly match the original part size and number exactly
- Laminations are coated to hinder corrosion and many feature molded plastic protection to help ensure that nothing is exposed
- Professional, premium aftermarket replacement
- Provides the performance and dependability you expect from ACDelco
- Manufactured to meet expectations for fit, form, and function
Driveworks – Electronic Ignition Coil (Part No.26196)
from
$31.99
Driveworks® offers a line of aftermarket parts and accessories that are commercially acceptable and competitively priced, which provides professional technicians and DIYers with an affordable alternative for repairs.
Product Features:
See More
Product Features:
- Direct-fit OE replacement ensures ease of installation
- Designed to meet OE performance
- As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
- As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
Carquest Premium – Ignition Coil: Meets or Exceeds OE Specifications, 1 Count (Part No.EBC1475)
from
$25.99
Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.
Product Features:
See More
Product Features:
- Built by IATF 16949 certified manufacturers for consistent durability
- Coil drivers match OE for current limit, electrostatic discharge (ESD) protection and multi-spark
- Segmented secondary bobbins to distribute high voltage and prevent shorting
- Extensive design validation testing to ensure long-lasting reliability
- 100% end-of-line tested to ensure proper performance
- Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
ACDelco – Ignition Coil (Part No.U505)
from
$78.99
An ACDelco Professional, premium aftermarket Ignition Coil is a high quality replacement for many vehicles on the road today. It increases electrical system voltage to help ignite the air/fuel mixture as the starting and charging system starts the engine, maintains the battery’s charge, and provides power to the electrical accessories while the engine is running. An ACDelco Professional Ignition Coil uses pure copper windings to improve durability and provides higher resistance to internal shorts and dielectric breakdown. Because the number and shape of the laminations determine the output characteristics of an ignition coil, ACDelco ensures that the silicone steel plates surrounding the ignition coil correctly match the original part size and number. Since steel laminations work best when they are new, shiny, and clean, ACDelco laminations are coated to hinder corrosion and many feature molded plastic protection to help ensure that nothing is exposed. This premium aftermarket replacement ignition coil is manufactured to meet your expectations for fit, form, and function.
Product Features:
See More
Product Features:
- High quality coated windings to improve durability and provide protection against internal shorts and dielectric breakdown
- Silicone steel plates surrounding the ignition coil correctly match the original part size and number exactly
- Laminations are coated to hinder corrosion and many feature molded plastic protection to help ensure that nothing is exposed
- Professional, premium aftermarket replacement
- Provides the performance and dependability you expect from ACDelco
- Manufactured to meet expectations for fit, form, and function
Accel – SuperCoil, GM HEI (Part No.140003)
from
$98.99
These coils feature advanced bobbin technology, highly specialized silicone magnetic steel cores, along with optimized winding, resistance and turns ratios to delivery 10-15 percent more energy than the OEM coils. Specialized high temperature epoxy resists shock and vibration, while increasing thermal conductivity. These are direct plug replacements for OEM coils. They feature bodies and, or secondary towers molded in ACCEL yellow and feature brass secondary contacts (except direct fire coil on plug applications).
Product Features:
See More
Product Features:
- 10-15% More Energy
- Direct Plug In Replacement Direct OE Fit
- Advanced Bobbin Technology
- Highly Specialized Silicone Magnetic Steel Cores
- Standard Motor Products SMP Dr-31
- MSD 8225
Carquest – Ignition Coil (Part No.E70)
from
$39.05
BWD® is an aftermarket leader, providing a premium line of engine management products. BWD® manufactures and distributes high technology critical components for late model domestic and import vehicles. BWD® is constantly evolving to give customers the competitive edge they need to compete in today’s ever-changing marketplace.
Product Features:
See More
Product Features:
- Manufactured with copper windings and permanent magnets to ensure strong signal emission and improved performance
- High temperature enameled wires were specified for better insulation and performance
- A full E-Lam core of silicon steel and solid brass high voltage terminals protects against corrosion. Our ignition coils are built for maximum output voltage
- Primary and Secondary windings feature enamel magnet wire for the highest temperature rating in the aftermarket
- As a tier I manufacturer with engineering and design capabilities second to none, our ignition coils are made to the highest quality standards
Carquest – Ignition Coil (Part No.26C1078)
from
$34.49
Carquest Ignition Coils ensure fast starts, consistent engine performance and optimized fuel efficiency at an affordable cost.
Product Features:
See More
Product Features:
- High output
- Long spark duration
- High dielectric strength
- Corrosion resistant connections
- High reliability
- Long service life
Carquest Premium – Spark Plug Wire Set: 8 Wires, Increased performance, Designed for direct fit (Part No.35-8105)
from
$39.99
Product Features:
See More
- SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
- Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
- 100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
- EPDM inner insulation stops power-robbing voltage leaks.
- With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
- Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
- Excellent interference suppression and consistent performance
- Easy lock terminals for more convenient installation.
- Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
- Broad coverage available for most vehicles on the road today
- Include grease pack to ensure easy installation and removal
Accel – Universal Fit Super Stock 8mm Suppression; Spark Plug Wire Set (Part No.4041)
from
$61.99
These ACCEL wire sets are a true performance upgrade replacement for OE types. Efficient delivery of spark energy for a good price. Silicone boots with black wire contain zinc-plated steel terminals. Noise suppression core. Set contains 8 plug wires with coil lead.
Product Features:
See More
Product Features:
- 7mm And 8mm High Gloss Silicone Jacket
- 450° F Rated Silicone Jacket
- Stainless Steel Plug Terminals
- RFI Suppression For Street Driven Applications
- Custom-fit Universal And Import Coverage
- High-strength Fiberglass Braid Construction
Delphi – Spark Plug Wire Set (Part No.XS10217)
from
$45.99
Pre-Greased Spark Plug Boots for Quicker Installation; Delphi Packard-marked Cable for OE Component Confirmation; OE Boots, Terminals, and Lead Lengths for No Hassle Installation; Application Correct Seven and Eight Millimeter Cable Sizes for Correct Fit
Product Features:
See More
Product Features:
- Pre-greased spark plug boots for quicker installation
- OE boots, terminals and lead lengths for no hassle installation
Carquest Premium – Spark Plug Wire Set: 9 Wires, Increased performance, Designed for direct fit (Part No.35-8331)
from
$38.99
Product Features:
See More
- SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
- Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
- 100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
- EPDM inner insulation stops power-robbing voltage leaks.
- With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
- Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
- Excellent interference suppression and consistent performance
- Easy lock terminals for more convenient installation.
- Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
- Broad coverage available for most vehicles on the road today
- Include grease pack to ensure easy installation and removal
Carquest Premium – Spark Plug Wire Set: 7 Wires, Increased performance, Designed for direct fit (Part No.35-6326)
from
$46.99
Product Features:
See More
- SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
- Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
- 100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
- EPDM inner insulation stops power-robbing voltage leaks.
- With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
- Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
- Excellent interference suppression and consistent performance
- Easy lock terminals for more convenient installation.
- Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
- Broad coverage available for most vehicles on the road today
- Include grease pack to ensure easy installation and removal
DENSO – Ignition Wire Set-7mm (Part No.671-8069)
from
$50.99
DENSO First Time Fit Ignition Wire Sets are identical in form, fit, color and performance to the factory-installed wire sets. Every part of each wire sets construction meets or exceeds OE/OES standards.
Product Features:
See More
Product Features:
- Meets or exceeds all O.E. Specifications
- Each wire is pre-cut to exact length so the wire set is ready to install right out of the box
- Identical OE end caps are designed to “click” into place for easy installation and a secure fit.
- Strong connections – through a patented process, the terminals are attached to provide an extremely strong connection, ensuring the cable and boot will not separate during removal and installation
ACDelco – Specific FitSpark Plug Wire Set: Fiberglass Reinforced Latex Graphite Core (Part No.9608B)
from
$73.99
ACDelco Professional Spark Plug Wire Sets consist of a set of wires, encased in an insulating material, connectors, and insulating boots, and are a high quality replacement for many vehicles on the road today. The wires transfer high voltage pulses between the voltage source, the distributor, and the spark plugs. These premium aftermarket replacement components are manufactured to meet your expectations for fit, form, and function.
Product Features:
See More
Product Features:
- Professional, premium aftermarket replacement
- Provides the performance and dependability you expect from ACDelco
- Manufactured to meet expectations for fit, form, and function
Accel – Universal Fit Super Stock 8mm Spiral; Spark Plug Wire Set (Part No.5041K)
from
$89.99
The traditional ACCEL combination of yellow wire and red spark plug boots has been added to these Super Stock Spiral Core 5000 Series wire sets, which feature color-matched wire and spark plug boots in blue, black, and red. With only 500 ohms/ft. of resistance, more ignition energy can reach the spark plug, producing a longer-lasting, hotter spark flame kernel. The results is higher performance through improved efficiency, quicker throttle response, and reduced emissions. This 8mm wire’s double silicone construction is rated to 550 degrees F. The high-gloss wire jacket resists moisture, chemicals, and heat extremes for longer life and great looks. The fiberglass braid adds greater pull strength and terminal retention, while the stainless steel spark plug terminals provide excellent long life, electrical conductivity, and corrosion resistance. Both universal and custom-fit applications are available for early and late model cars and trucks.
Product Features:
See More
Product Features:
- 500 Ohms Per Foot Of Resistance
- 550 Degree F Rated Silicone Jacket
- Stainless Steel Plug Terminals
- High RFI Suppression For Street/Strip Use
- Custom Fit Universal and Import Coverage
- High-strength Fiberglass Braid Construction
- Pre And Post HEI Vehicles
ACDelco – Specific FitSpark Plug Wire Set: Fiberglass Reinforced Latex Graphite Core (Part No.9608E)
from
$67.99
ACDelco Professional Spark Plug Wire Sets consist of a set of wires, encased in an insulating material, connectors, and insulating boots, and are a high quality replacement for many vehicles on the road today. The wires transfer high voltage pulses between the voltage source, the distributor, and the spark plugs. These premium aftermarket replacement components are manufactured to meet your expectations for fit, form, and function.
Product Features:
See More
Product Features:
- Professional, premium aftermarket replacement
- Provides the performance and dependability you expect from ACDelco
- Manufactured to meet expectations for fit, form, and function
DENSO – Spark Plug Wire Set: Carbon Core, 8 Wire Set (Part No.671-8029)
from
$74.99
DENSO First Time Fit Ignition Wire Sets are identical in form fit color and performance to the factory-installed wire sets. Every part of each wire sets construction meets or exceeds OE/OES standards.
Product Features:
See More
Product Features:
- Each wire is pre-cut to exact length so the wire set is ready to install right out of the box
- Identical OE end caps are designed to “click” into place for easy installation and a secure fit
- Strong connections – through a patented process, the terminals are attached to provide an extremely strong connection, ensuring the cable and boot will not separate during removal and installation
DENSO – Spark Plug Wire Set: Carbon Core, 9 Wire Set (Part No.671-8044)
from
$58.99
DENSO First Time Fit Ignition Wire Sets are identical in form fit color and performance to the factory-installed wire sets. Every part of each wire sets construction meets or exceeds OE/OES standards.
Product Features:
See More
Product Features:
- Each wire is pre-cut to exact length so the wire set is ready to install right out of the box
- Identical OE end caps are designed to “click” into place for easy installation and a secure fit
- Strong connections – through a patented process, the terminals are attached to provide an extremely strong connection, ensuring the cable and boot will not separate during removal and installation
NGK – NGK Wire Set (Part No.51374)
from
$41.49
NGK ultra-low resistance mag core wire sets provide outstanding performance and durability. High-temp premium silicone outer jacket and inner EPDM/silicone insulation contain high voltage currents for excellent dielectric strength. Stainless steel winding
Product Features:
See More
Product Features:
- PERFECT FIT FOR YOUR VEHICLE: Built to OEM tolerances with OE quality or better materials
- BUILT TO LAST: Outer Jacket built to withstand temperatures greater than 250 degrees C, inner insulation EPDM or silicone for best dielectric strength
- STAINLESS STEEL TERMINALS: Provide the highest possible retention to ensure positive connections through the life of the set
- CYLINDER LEAD ID: Cylinder lead identification tags where possible make installation easier
Accel – Custom Fit Super Stock Spiral Spark Plug Wire Set, 8mm, Black (Part No.5048K)
from
$81.99
ACCEL Super Stock wire sets are a true performance upgrade replacement for OE types. Efficient delivery of spark energy for a good price. Silicone boots with zinc-plated steel terminals.
Product Features:
See More
Product Features:
- Spiral Core
- Silicone Spark Plug Boots
- 500 Ohms Per Foot Resistance
- 550 Degree Wire Temperature Rating
- Meets Or Exceeds OE Boot Temperature Rating
- Magnetic Suppression
- 500 Ohms Resistance
DENSO – Spark Plug Wire Set: Carbon Core, 8 Wire Set (Part No.671-8006)
from
$59.99
DENSO First Time Fit Ignition Wire Sets are identical in form fit color and performance to the factory-installed wire sets. Every part of each wire sets construction meets or exceeds OE/OES standards.
Product Features:
See More
Product Features:
- Each wire is pre-cut to exact length so the wire set is ready to install right out of the box
- Identical OE end caps are designed to “click” into place for easy installation and a secure fit
- Strong connections – through a patented process, the terminals are attached to provide an extremely strong connection, ensuring the cable and boot will not separate during removal and installation
Popular 1967 Pontiac LeMans Ignition Coils and Boots Categories
1967 Pontiac LeMans Ignition Coils and Boots
Maybe you’re in the middle of a full rebuild of that 1967 Pontiac LeMans. Maybe you just need a couple of Ignition Coils and Boots. Either way, Advance Auto Parts has 11 different Ignition Coils and Boots in our inventory ranging from $28.99 to $85.99. That means you can find the exact parts or products you need to keep that 1967 Pontiac LeMans running smoothly.
Ignition Coils and Boots are only as good as their brand. We stock 7 different brands to make sure you have plenty of trusted parts to choose from for your 1967 Pontiac LeMans. Carquest, Carquest Premium, and DriveWorks are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Ignition Coils and Boots for your 1967 Pontiac LeMans, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.
So if you’re in the market for aftermarket Ignition Coils and Boots to keep your 1967 Pontiac LeMans rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Ignition Coils and Boots Brands To Make Your 1967 Pontiac LeMans Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 1967 Pontiac LeMans demands trusted brand parts and products to keep it running. Many trusted brands of Ignition Coils and Boots make up Advance Auto Parts’ inventory, and all are ready to help make your LeMans the best it can be. Be sure to browse some of our top Ignition Coils and Boots brands and parts.
Popular Carquest Ignition Coils and Boots
We carry Carquest parts in our stock across Ignition Coils categories, plus more. For a 1967 Pontiac LeMans, our most popular Carquest Ignition Coils and Boots include:
Top 1967 Pontiac LeMans Ignition Coils and Boots from Driveworks
Driveworks products are another trusted brand when it comes to Ignition Coils and Boots for your 1967 Pontiac LeMans. Popular Driveworks parts include:
FAQs for 1967 Pontiac LeMans Ignition Coils and Boots
What are the most purchased Ignition Coils and Boots for the 1967 Pontiac LeMans?
Out of 11 Ignition Coils and Boots for the 1967 Pontiac LeMans, the most popular in our inventory are:
from
$41.49
This product is not rated
Ignition Coil: Meets or Exceeds OE Specifications, 1 Count
Ignition Coils
from
$35.49
This product is not rated
Ignition Coil: Meets OE Specifications, 1 Count
Ignition Coils
