1967 Mercury Park Lane Performance Engines

More 1967 Mercury Park Lane Performance Engines

Find your specific 1967 Mercury Park Lane original or aftermarket Performance Engines below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.

Essential 1967 Mercury Park Lane Performance Engines

FEL-PRO Performance – Cylinder Head Gasket: Steel Core Composite, Without Head Bolts (Part No.1020)

Cylinder Head Gasket: Steel Core Composite, Without Head Bolts

from

$41.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Fel-Pro Performance head gaskets accommodate the high cylinder pressures and cylinder head movement associated with performance engines.
  • Inserted within a stainless steel armor surrounding each cylinder, wire ring design provides highly concentrated sealing around the combustion chamber.
  • Raises combustion sealing force to roughly three times that of standard head gaskets.
  • Steel wire rings for the greatest combustion seal strength.
  • Not intended for use in emission controlled vehicles.
See More

(1 reviews)
View Product

Edelbrock – Cylinder Head Gasket Set for Ford (Part No.7337)

Cylinder Head Gasket Set for Ford

from

$61.99
Product Features:
  • Cylinder Head Gasket Set
  • 1958-1976 390-428
See More
View Product

Mr. Gasket – Head Gasket (Part No.1132G)

Head Gasket

from

$37.59
Mr. Gasket Embossed Steel Shim Cylinder Head Gaskets are for high performance street machines, drag racing and oval track racing. This is a very unique design that has a solid metal on metal fold at the combustion seal. This fold makes for a very stout seal that is almost the equivalent of a higher-end MLS (multi-layer steel) gasket with a gas stopper layer, but at a much lower cost. This gasket also has embossments around the coolant and oil passages and has a thick aluminum flake coating. All of these features result in a steel shim head gasket that handles extreme cylinder pressures very well. It’s probably the best steel shim head gasket you could ask for. Sold individually.

Product Features:
  • Embossed steel with aluminum flake coating
  • Solid metal over metal fold at the combustion seal
  • Embossed seals at coolant and oil passages
  • Approximately .020″ compressed thickness
  • For high performance street, drag race and oval track use.
See More
View Product

Edelbrock – Sure Seat Valve Springs for Chrysler 383-400-413-440 V8 1969-79 (Part No.5792)

Sure Seat Valve Springs for Chrysler 383-400-413-440 V8 1969-79

from

$141.99
Product Features:
  • Non-Rotator Type
  • 1.550 in. Outer Diameter
  • .190 Wire Size
  • Single Coil Spring Type
  • Set of 16
See More
View Product

Mr. Gasket – Intake Gasket (Part No.202A)

Intake Gasket

from

$40.19
Mr. Gasket Performance Intake Gaskets are manufactured from cellulose/nitrile composition gasket material. They provide excellent sealing and durability. Can be trimmed if necessary for modified port applications. Complete with manifold end seals and distributor gasket (where applicable). For original equipment replacement, high performance street, drag race and oval track.

Product Features:
  • Manufactured from cellulose/nitrile composition gasket material
  • Provides excellent sealing and durability
  • Can be trimmed if necessary for modified port applications
  • Complete with manifold end seals and distributor gasket where applicable
  • For OE replacement, high performance street, drag race and oval track use
See More
View Product

FEL-PRO Performance – Lower Intake Manifold Gasket Set: 5 Piece Set (Part No.1246)

Lower Intake Manifold Gasket Set: 5 Piece Set

from

$39.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Fel-Pro performance intake manifold gaskets have been tested with virtually all aftermarket cylinder head and intake manifold combinations.
  • Performance intake manifold gaskets designed without a metal core, to allow engine builders to trim the gasket for exact fit on modified ports.
  • Standard and Low riser
  • Printoseal elastomeric sealing beads to provide extra sealing strength around the intake port.
  • Not intended for use in emission controlled vehicles.
See More
View Product

Edelbrock – NHRA Legal Ford FE 428 Cylinder Head (Part No.60058)

NHRA Legal Ford FE 428 Cylinder Head

from

$567.99


Product Features:
  • Out-of-the-Box Bolt-On Performance
  • Valves Promote Excellent Flow For Streetable Power
  • NHRA Accepted For Stock And Super Stock
  • Thicker Deck Surfaces than Other Brands
  • NHRA Accepted for Stock/Super Stock
See More
View Product

Edelbrock – Valve Cover Gasket Set for Ford (Part No.7568)

Valve Cover Gasket Set for Ford

from

$40.99
Product Features:
  • Valve Cover Gasket
See More
View Product

Edelbrock – #21053 Performer 390 Intake Manifold, Ford FE, 332-428, Black Finish (Part No.21053)

#21053 Performer 390 Intake Manifold, Ford FE, 332-428, Black Finish

from

$479.99
The Edelbrock Performer 390 #21053 intake manifold is designed for street 332-352-360-390-406-410-427-428 c.i.d. Ford V8’s with medium- or low-rise cylinder heads. Manifold not equipped with EGR; will not accept stock Motorcraft spread-bore carburetor or
See More
View Product

Edelbrock – Performer 390 Intake Manifold for Ford FE, Satin Finish (Part No.2105)

Performer 390 Intake Manifold for Ford FE, Satin Finish

from

$597.99


Product Features:
  • For Idle to 5500 RPM Street-Driven Performance
  • Dual-Plane Low-Rise Intake w/180 deg. Firing Order
  • Patented Runner Design Ensures Broad Torque Curve
  • Excellent Throttle Response and Mid-Range Power
  • 50-State Street Legal if Correct Carburetor Used
See More

(1 reviews)
View Product

FEL-PRO Performance – PERFORMANCE OIL PAN GASKET SET (Part No.1817)

PERFORMANCE OIL PAN GASKET SET

from

$27.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Felcoid/Plus gaskets have a fiber sheet core and a latex rubber coating to eliminate potential leakage paths. The core material resists crushing and splitting, while providing excellent blowout resistance.
  • With steel core to provide ultimate excellent blowout resistance.
  • Not intended for use in emission controlled vehicles.
See More
View Product

Spectre – Water Neck; Ford 390-428 (Part No.4736)

Water Neck; Ford 390-428

from

$47.99
Spectre’s Ford water neck fits Ford 390, 427 and 428 engines. This water neck has been designed around the OEM specifications and has a chrome plated finish for a lasting look that fits great. This water neck includes bolts.

Product Features:
  • Fits Ford 390, 427 and 428 engines
  • Includes bolts and gasket
  • Chrome plated
  • Easy to install
See More

(1 reviews)
View Product

Mr. Gasket – High Performance 180 Degree Thermostat for Increased Flow (Part No.4364)

High Performance 180 Degree Thermostat for Increased Flow

from

$26.99
Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.

Product Features:
  • Opens At 180 Degrees
  • Designed to Resist Large Variations of Coolant Pressure at High RPM
  • Fully Opens at Correct Temperature Consistently Regardless of Engine RPM
  • For High Performance Street, Drag Race, and Oval Track
  • Copper & Brass Construction – Resists Corrosion
  • High Flow
See More

(20 reviews)
View Product

1967 Mercury Park Lane Performance Engines

Maybe you’re in the middle of a full rebuild of that 1967 Mercury Park Lane. Maybe you just need a couple of Performance Engines. Either way, Advance Auto Parts has 13 different Performance Engines in our inventory ranging from $26.99 to $597.99. That means you can find the exact parts or products you need to keep that 1967 Mercury Park Lane running smoothly.

Performance Engines are only as good as their brand. We stock 4 different brands to make sure you have plenty of trusted parts to choose from for your 1967 Mercury Park Lane. Mr. Gasket, FEL-PRO Performance, and Edelbrock are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Performance Engines for your 1967 Mercury Park Lane, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 55 reviews in this category, some of the top rated parts include Cylinder Head Gasket: Steel Core Composite, Without Head Bolts with 1.0 stars.

So if you’re in the market for aftermarket Performance Engines to keep your 1967 Mercury Park Lane rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Performance Engines Brands To Make Your 1967 Mercury Park Lane Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1967 Mercury Park Lane demands trusted brand parts and products to keep it running. Many trusted brands of Performance Engines make up Advance Auto Parts’ inventory, and all are ready to help make your Park Lane the best it can be. Be sure to browse some of our top Performance Engines brands and parts.

Popular Edelbrock Performance Engines

We carry Edelbrock parts in our stock across Performance Intake Manifolds categories, plus more. For a 1967 Mercury Park Lane, our most popular Edelbrock Performance Engines include:
Performer 390 Intake Manifold for Ford FE, Satin Finish
from $597.99
(1)
Performer 390 Intake Manifold for Ford FE, Satin Finish
Performance Intake Manifolds

Top 1967 Mercury Park Lane Performance Engines from Mr. Gasket

Mr. Gasket products are another trusted brand when it comes to Performance Engines for your 1967 Mercury Park Lane. Popular Mr. Gasket parts include:
High Performance 180 Degree Thermostat for Increased Flow
from $26.99
(20)
High Performance 180 Degree Thermostat for Increased Flow
Performance Engine Coolant Thermostats

FAQs for 1967 Mercury Park Lane Performance Engines

What are the most purchased Performance Engines for the 1967 Mercury Park Lane?

Out of 13 Performance Engines for the 1967 Mercury Park Lane, the most popular in our inventory are:
PERFORMANCE OIL PAN GASKET SET
from $27.49
This product is not rated
PERFORMANCE OIL PAN GASKET SET
Performance Engine Oil Pan Gaskets
Lower Intake Manifold Gasket Set: 5 Piece Set
from $39.99
This product is not rated
Lower Intake Manifold Gasket Set: 5 Piece Set
Performance Engine Intake Manifold Gaskets
Water Neck; Ford 390-428
from $47.99
(1)
Water Neck; Ford 390-428
Performance Water Outlets

What are the top-rated 1967 Mercury Park Lane Performance Engines?

Top-rated Performance Engines for your 1967 Mercury Park Lane based on customer reviews/ratings are:
Cylinder Head Gasket: Steel Core Composite, Without Head Bolts
from $41.99
(1)
Cylinder Head Gasket: Steel Core Composite, Without Head Bolts
“Had to call and talk to 3 operators 3 separate times to get this straightened out .On item description should say 1 gasket requires 2.”

More Popular Parts for All Makes