1967 Jeep J-2600 Ignition Wires

Essential 1967 Jeep J-2600 Ignition Wires

Accel – Universal Fit Graphite Suppression; Spark Plug Wire Set (Part No.8026)

Universal Fit Graphite Suppression; Spark Plug Wire Set

from

$128.99
These ACCEL carbon and graphite core wire sets virtually eliminate RFI noise, while providing maximum conductivity for ultimate performance in any race or street application. Double silicon insulation eliminates leakage and misfire.

Product Features:
  • Heavy Duty 8.8mm Oversized Silicone Jacket
  • 500 Ohms/ft. Of Resistance
  • 550 Degree Double Silicone Construction
  • Fiberglass Braid
  • Carbon/Graphite Core
  • Magnetic Suppression
  • Fiberglass/Kevlar Core
  • 500 Ohms Resistance
See More

PerTronix – 808480 Flame-Thrower Spark Plug Wires 8 cyl 8mm Universal 180 Degree Red (Part No.808480)

808480 Flame-Thrower Spark Plug Wires 8 cyl 8mm Universal 180 Degree Red

from

$82.99
Most modern electronic ignition systems require suppression style wires to preserve sensitive components. Flame-Thrower 8mm Custom fit MAGx2 wires provide enhanced RFI suppression and dual current paths for more power delivered to the spark plug. Our custom wire sets have factory terminated ends for a superior connection and perfect fit, without cutting, crimping and splicing.

Product Features:
  • Two current paths for reliability and redundancy. -Primary path: Spiral wound stainless steel alloy.-Secondary path: Carbon impregnated fiberglass center core.
  • Low 500 ohm per foot resistance.
  • 8mm Silicone jacket to resist high temperatures, moisture, oil and chemicals.
  • EPDM (Ethylene Propylene Diene Methylene) inner insulation for superior heat resistance and prevention of arcing and voltage leaks.
  • Fiberglass reinforcing braid for added strength and flexibility.
See More

MSD Ignition – Wire Set; Super Conductor; Multi-Angle Plug; Socket/HEI (Part No.31179)

Wire Set; Super Conductor; Multi-Angle Plug; Socket/HEI

from

$143.99
Set includes terminals for engines with early type (socket) and late type (HEI spark plug top) distributor caps. 90 degree boots and terminals factory installed on one end.

Product Features:
  • Extra Long 8.5mm Wires So You Can Cut To Your Designed Length
  • Incl. both socket-style and spark plug-style boots and terminals
  • Includes Mini-Stripper-Crimper For Factory Style Crimps
  • Size Includes [6] 90 Deg. Boots/Terminals
  • Durable outer sleeve is a proprietary compound for resistance to high heat or abrasion
  • Stainless steel terminals feature dual crimp tabs to grip wire conductor and outer jacket separately
See More

MSD Ignition – Wire Set; Super Conductor; AMC V8 Engines with HEI Cap (Part No.35859)

Wire Set; Super Conductor; AMC V8 Engines with HEI Cap

from

$169.99
The MSD 8.5mm super conductor wire is the performance wire. Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference. In a single 12 inch length of super conductor wire there is only 40 – 50 ohms of resistance. That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it’s great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective electro magnetic interference (EMI) or choke. This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. Available in universal kits and bulk lengths.

Product Features:
  • Bolt-on Performance
  • Custom Fit For Make And Model Listed
  • Wires Are Pre-Cut To Exact Specifications
  • Conductor core features DuPont Kevlar material for increased tensile strength
  • Durable outer sleeve is a proprietary compound for resistance to high heat or abrasion
  • Stainless steel terminals feature dual crimp tabs to grip wire conductor and outer jacket separately
See More

Mallory – Mallory Prosidewinder 90F Univ. Wire Set (Part No.937)

Mallory Prosidewinder 90F Univ. Wire Set

from

$133.99
Features at a glance, low 300 Ohm resistance spiral core delivers high energy output for maximum spark at the plug. Great RFI suppression meets the demands of today’s on-board electronics, such as electronic ignition, sound systems, and computer controls. 8MM ozone-resistant red silicone jacket repels water, oil, grease, and fuel, and withstands temperatures up to 500 degrees. Fits V8, universal wire kit: includes 45 degree spark plug boots, female socket (standard) distributor boots and terminals.

Product Features:
  • Most Advanced Wire By Mallory
  • RFI Suppression
  • High Temperature Silicone Jacket
  • Withstands Over 500+F
  • Come In Ready To Use Kits
  • Extra Long Kits
See More

Mallory – Mallory Prosidewinder 135F Univ/Wire Set (Part No.947)

Mallory Prosidewinder 135F Univ/Wire Set

from

$153.99
Features at a glance, low 300 Ohm resistance spiral core delivers high energy output for maximum spark at the plug. Great RFI suppression meets the demands of today’s on-board electronics, such as electronic ignition, sound systems, and computer controls. 8MM ozone-resistant red silicone jacket repels water, oil, grease, and fuel, and withstands temperatures up to 500 degrees. Fits V8, universal wire kit: includes 45 degree spark plug boots, female socket (standard) distributor boots and terminals.

Product Features:
  • Most Advanced Wire By Mallory
  • RFI Suppression
  • High Temperature Silicone Jacket
  • Withstands Over 500+F
  • Come In Ready To Use Kits
  • Extra Long Kits
See More

1967 Jeep J-2600 Ignition Wires

Maybe you’re in the middle of a full rebuild of that 1967 Jeep J-2600. Maybe you just need a couple of Ignition Wires. Either way, Advance Auto Parts has 2 different Ignition Wires in our inventory ranging from $133.99 to $153.99. That means you can find the exact parts or products you need to keep that 1967 Jeep J-2600 running smoothly.

Ignition Wires are only as good as their brand. We stock 1 different brands to make sure you have plenty of trusted parts to choose from for your 1967 Jeep J-2600. Mallory are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Ignition Wires for your 1967 Jeep J-2600, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.

So if you’re in the market for aftermarket Ignition Wires to keep your 1967 Jeep J-2600 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Ignition Wires Brands To Make Your 1967 Jeep J-2600 Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1967 Jeep J-2600 demands trusted brand parts and products to keep it running. Many trusted brands of Ignition Wires make up Advance Auto Parts’ inventory, and all are ready to help make your J-2600 the best it can be. Be sure to browse some of our top Ignition Wires brands and parts.