1967 Jeep J-2500 Performance and Racing Products
Find Your Specific 1967 Jeep J-2500 Performance and Racing Products
Below you will find various in-demand Jeep Performance and Racing Products, components and accessories for your 1967 J-2500. Advance Auto Parts has popular J-2500 parts like Performance Steering Products, Performance Exhaust Products, Performance Fuel Systems and more. You’ll also find aftermarket and OEM Performance and Racing Products for other J-2500 model years including
1965,
1966,
1968,
1969,
1970,
1971,
1972,
1973 and more. Select a category of 1967 Jeep J-2500 Performance and Racing Products below and start saving instantly.
Popular 1967 Jeep J-2500 Performance and Racing Products Categories
Essential Performance and Racing Products for 1967 Jeep J-2500s
Omix – Driveshaft U-Joint; 1310 Spicer (Part No.16585.02)
from
$38.49
Are your U-joints making noise? Or has one broken? When they do break, they usually damage the axle shafts or driveshafts too. That’s a lot of unnecessary work and expense. U-joint replacement is a routine maintenance chore.
Product Features:
See More
Product Features:
- Front/Rear
- OE Style
- Direct Fit
Omix – Exhaust Manifold Gasket Set; 72-80 Jeep CJ Models (Part No.17451.03)
from
$19.49
Are you smelling exhaust in your Jeep? Can you hear an exhaust leak? If so, it’s time to replace the exhaust manifold gasket. Omix-ADA offers high quality exhaust manifold gaskets to solve the problem.
Product Features:
See More
Product Features:
- Fiber
- Heat Resistant
- OE Style
- Direct Fit
FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1434)
from
$32.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
- Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
- Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
- Slotted bolt holes allow for easier header installation.
- Not intended for use in emission controlled vehicles.
Omix – Ignition Coil; 72-74 Jeep CJ Models (Part No.17247.06)
from
$48.99
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA.
Product Features:
See More
Product Features:
- Copper Wire
- OE Style
- Direct Fit
Accel – Super Stock Replacement Coil for Improved Performance, Starting, and Power (Part No.8140)
from
$45.99
Excellent high performance replacement for import and domestic vehicles with canister type oil filled coil. Re-engineered windings for even higher energy output resulting in quicker starting improved throttle response and more high RPM power. Designed to work with Points style and Breakerless electronic ignition systems. Heavy duty black Alkyd tower provides in flashover in protection to primary terminals. ACCEL Yellow can. 42000 volts effective up to 6500 RPM 1.4 ohms on the primary
Product Features:
See More
Product Features:
- 42000 Volts
- Effective To 6500 RPM
- Quicker Starting
- Improved Throttle Response
- Higher RPM Power
- Can Finished In Yellow
Rancho – Steering Damper Kit (Part No.RS97355)
from
$119.99
Designed to reduce wheel shimmy and end vibration caused by larger tires, the Rancho steering stabilizer kit cuts down on steering arm fatigue to improve handling. The kit includes one Rancho RS5000 steering stabilizer and installation brackets.
Product Features:
See More
Product Features:
- COMPATIBILITY – Designed for a variety of trucks and SUVs from Chevrolet, GMC, Ford, Dodge, Jeep, Plymouth and International
- IMPROVED HANDLING AND PERFORMANCE – Reduces wheel shimmy, bump steer and vibration which helps minimize on-road or off-road driver fatigue
- ACCOMMODATES LARGER TIRES – Engineered for vehicles with oversized wheels and tires.
- ENGINEERED TO LAST – Features protective boot to shield shock rod and oil seal and 0.25-in. high-strength, low-alloy steel bracket construction for long life
- EASY TO INSTALL – Includes one Rancho RS5000 steering stabilizer and brackets that bolt directly to factory steering linkage with included mounting hardware, no modifications needed
- EASY TO INSTALL – Includes one Rancho RS5000 steering stabilizer and brackets that bolt directly to factory steering linkage with included mounting hardware, no modifications needed
- RESISTS CORROSION – Durable black powder-coated and/or zinc-plated brackets resist rust and corrosion
- PRECISION DESIGN – Brackets are CNC cut and bent to exact specifications for a perfect fit
- BUY WITH CONFIDENCE – Comes with Rancho’s limited warranty
B & M – Torque Converter, Nitrous Holeshot 3600 (Part No.20482)
from
$749.99
Nitrous Holeshot Converters are Built with the same features as the other B&M Holeshots, with the addition of anti-balloon plates. The anti-balloon plates will allow these converters to stand up to the instant horsepower nitrous delivers.
Product Features:
See More
Product Features:
- 3400-3800 RPM
- Small And Big Blocks
- Serious Performance
- Furnace Brazed
- Fully Balanced
B & M – Holeshot 3000 (Part No.20413)
from
$899.99
HoleShot 3000 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) APPLICATION: HoleShot 3000 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) A higher than stock stall speed as delivered by the Holeshot c
Product Features:
See More
Product Features:
- Furnace Brazed Impeller
- Steel Alloy Pump Drive Tube
- Heavy Duty Needle Bearing
- Between Stator and Turbine
- Furnace Brazed Turbine
Rugged Ridge – Engine Mount Kit; Aluminum (Part No.18390.20)
from
$174.99
Rugged Ridge Solid Motor mounts are built from 6061-T6 Aluminum with a tensile strength of 42,000 psi. Built to replace your wimpy OE rubber engine mounts to eliminate weight transfer on the trail torque loss and binding that result in excess engine movement.
Product Features:
See More
Product Features:
- Aluminum
- Pair
Lakewood – Trans Mount: Urethane-Chevy (Part No.24350)
from
$97.99
Constructed of durable polyurethane to handle the stress oh high horsepower. Absorbs vibration and lasts longer than rubber Features unique built-in safety lock to keep from separating under high torque loads. Ideal for use on street or strip applications. Complete with grade-8 mounting hardware.
Product Features:
See More
Product Features:
- Durable Polyurethane
- Absorbs Vibration
- Last Longer Than Rubber
- Built-In Safety Lock
Omix – Valve Cover Gasket; 6 Cylinder; 65-80 Jeep CJ/SJ (Part No.17447.02)
from
$13.29
Is your Jeep’s valve cover gasket leaking? Or, are you rebuilding an engine and need a fresh gasket? Omix-ADA offers high-quality replacement gaskets that will give you years of service and get you back on the road.
Product Features:
See More
Product Features:
- Cork
- OE Style
- Direct Fit
Omix – Distributor Drive Gear; 72-91 Jeep CJ/Wrangler YJ (Part No.17423.01)
from
$48.49
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA.
Product Features:
See More
Product Features:
- Distributor Mounted
- OE Style
- Direct Fit
Omix – Camshaft (Part No.17421.07)
from
$175.99
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.
Product Features:
See More
Product Features:
- Made To OE Spec
- Direct Fit
- Limited 5 Year Warranty
Mr. Gasket – High Performance 180 Degree Thermostat for Increased Flow (Part No.4364)
from
$29.99
Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.
Product Features:
See More
Product Features:
- Opens At 180 Degrees
- Designed to Resist Large Variations of Coolant Pressure at High RPM
- Fully Opens at Correct Temperature Consistently Regardless of Engine RPM
- For High Performance Street, Drag Race, and Oval Track
- Copper & Brass Construction – Resists Corrosion
- High Flow
Mr. Gasket – High Performance Thermostat – 160 Degree Brass & Copper (Part No.4363)
from
$29.49
Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.
Product Features:
See More
Product Features:
- Opens at 160 Degrees
- Designed to Resist Large Variations of Coolant Pressure at High RPM
- Fully opens at Correct Temperature Consistently Regardless of engine RPM
- For High Performance Street, Drag Race, and Oval Track
- Copper & Brass Construction – Resists Corrosion
- High Flow
Omix – Thermostat 180 Degree; 41-71 Willys/Jeep Models (Part No.17106.02)
from
$8.29
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA.
Product Features:
See More
Product Features:
- OE Style
- Direct Fit
- Steel
- Better Flow Control
Mr. Gasket – Thermocap Radiator Cap (Part No.2470B)
from
$54.99
The fastest, easiest way to know exactly when it’s safe to open your radiator cap. ThermoCap, with its built-in calibrated thermometer, indicates the coolant temperature.
Product Features:
See More
Product Features:
- Indicates coolant temperature
- Helps prevent coolant injuries
- Fahrenheit and centigrade readings
- Color-coded temperature ranges
- Integrated coolant reclamation valve
- Improves under-hood appearance
- Chromed crown with a colored trim ring
Omix – Tie Rod End Tube (Part No.18046.03)
from
$26.49
Is your Jeep’s steering loose? Are your tires wearing in an uneven pattern? Chances are that some of your steering components are worn. Fixing them is cheaper than replacing your tires and it’s a whole lot safer too.
Product Features:
See More
Product Features:
- Steel
- OE Style
- Direct Fit
Mallory – Unilite Electronic Ignition Distributor Series 37 (Part No.3760001)
from
$599.99
The industry standard with adjustable mechanical advance curve. Triggered by photo-optic infrared LED system. Improved combustion efficiency and economy, increased spark plug life and cold weather starting, and maintenance free operation.
Product Features:
See More
Product Features:
- Improved Combustion And Economy
- Increased Spark Plug Life
- Improved Cold Weather Starting
- Maintenance Free Operation
- Accurate Spark Timing
- Self-Lubricating Bushings
- Years Of Trouble-Free Service
MSD Ignition – Distributor; AMC V8 Engines (Part No.8519)
from
$525.99
There is a big following of AMC enthusiasts that are cruising a 401 equipped Javelin or trail blazing in a rock crawling Jeep with an inline 6-cylinder! MSD offers two Pro-Billet distributors to deliver accurate trigger signals and are maintenance-free! Under the brass terminal cap of each distributor is MSD’s race proven magnetic pick-up. This pick-up never requires adjustment and simply plugs right into an MSD Ignition control. Just above it and under our strong race rotor is an adjustable mechanical advance assembly. The chro-moly weights of this assembly slide on nylon bushings producing smooth movement of the timing. You can easily adjust the curve to match your engine’s requirements with the supplied springs and stop bushings. Each precision CNC-machined billet aluminum housing features a sealed ball-bearing and long sintered bushing for stability at any RPM and increased endurance. An oversized steel shaft receives a QPQ coating to reduce friction and prevent corrosion.
Product Features:
See More
Product Features:
- Designed For Street/Performance Use w/Mech or Vacuum Advance
- Must Be Used w/An MSD Ignition Control
- Supplied w/HEI style distributor cap/rotor (accepts Cap-A-Dapts)
- QPQ coated polished steel shaft; guided by sealed ball bearings
- Maintenance-free magnetic pickup and precision reluctor
- Creates stable trigger signals throughout the rpm range
- Easy-to-adjust mech. advance w/supplied springs and stop bushings
- Vacuum advance canister for improved economy (can be locked out)
Edelbrock – Performer Carburetor #9907 750 CFM With Manual Choke, Satin Finish (Non-EGR) (Part No.9907)
from
$407.99
Product Features:
See More
- Satin Finish
- 4 Barrel
- Annular Booster Type
- Manual Choke Type
- 750 cfm Maximum Flow Rating
Holley – Street Carburetor: 670 CFM, Electric Choke, 4 Barrel, Square Bore, Dual Inlet, Shiny (Part No.0-80670)
from
$682.99
Square flange bolt pattern. Performance calibrated. The ultimate vacuum secondary street performance upgrade.
Product Features:
See More
Product Features:
- Vibratory Polished For Good Looks
- Optimized Street Calibration That Works Out Of The Box
- Factory Preset Electric Choke For Easy Startups
- Quick Change Vacuum Housing Cap To Tune For Performance/Fuel Econ
- No Unnecessary Trips Back To The Parts Store
- Limited Lifetime Warranty
- 100% Wet Flow Tested By Holley Technicians
- Arrives Ready To Run
Edelbrock – Performer Carburetor #9906 600 CFM With Electric Choke, Satin Finish (Non-EGR) (Part No.9906)
from
$414.99
Burnished aluminum. GM/MAC- style throttle linkage. Electric choke installed from factory. Easy tuning with 2 piece design. Smooth secondary transition. Both timed for full vacuum ports. Includes PCV outlet.
See More
Holley – Prem Street Carbs (Avengers) (Part No.0-80870)
from
$699.99
Square flange bolt pattern. Performance calibrated. The ultimate vacuum secondary street performance upgrade.
Product Features:
See More
Product Features:
- Vibratory Polished For Good Looks
- Optimized Street Calibration That Works Out Of The Box
- Factory Preset Electric Choke For Easy Startups
- Quick Change Vacuum Housing Cap To Tune For Performance/Fuel Econ
- No Unnecessary Trips Back To The Parts Store
- Limited Lifetime Warranty
- 100% Wet Flow Tested By Holley Technicians
- Arrives Ready To Run
Holley – Street Carburetor: 600 CFM, Electric Choke, 4 Barrel, Square Bore, Single Inlet, Shiny (Part No.0-80457S)
from
$499.99
Holley’s new 0-80457SA is constructed from aluminum which compared to its zinc counterpart equates to a weight savings of 40%! Holley’s aluminum 0-80457SA will hold its shine longer and also can be hand polished for a custom look! Its 600 CFM of airflow,
Product Features:
See More
Product Features:
- Vibratory Polished For Good Looks
Edelbrock – Performer 1400 Carburetor: 600 CFM, 4 Barrel, Square Bore, Electric Choke Inlet (Part No.1400)
from
$523.99
The Edelbrock 1400 Performer Series 600 CFM electric choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characterist
Product Features:
See More
Product Features:
- Edelbrock products offer improved performance and aesthetics for a broad array of vehicles and engines. ‘Proven performance’ is the philosophy by which Edelbrock was founded and it continues to this day with the highest standards for performance and quali
- Electric Choke
- 4 Barrel Count
- Square Bore
- Electric Choke Installed from Factory
- Smooth Secondary Transition
- Includes Only Timed Vacuum Port
- Includes EGR ; Fuel Vapor Outlet
Holley – Prem Street Carbs (Avengers) (Part No.0-80570)
from
$699.99
Square flange bolt pattern. Performance calibrated. The ultimate vacuum secondary street performance upgrade.
Product Features:
See More
Product Features:
- Vibratory Polished For Good Looks
- Optimized Street Calibration That Works Out Of The Box
- Factory Preset Electric Choke For Easy Startups
- Quick Change Vacuum Housing Cap To Tune For Performance/Fuel Econ
- No Unnecessary Trips Back To The Parts Store
- Limited Lifetime Warranty
- 100% Wet-Flow Tested To Assure It Arrives Ready To Run
- Street Ready; Out Of The Box
Upgrade your 1967 Jeep J-2500 with Top-Quality Performance and Racing Products
When it comes to maintaining or upgrading your 1967 Jeep J-2500, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Jeep or enhancing its overall performance, Performance and Racing Products are key to keeping your J-2500 functioning at its best. At Advance Auto Parts, we offer a wide selection of 23 Performance and Racing Products for the 1967 Jeep J-2500, designed to meet your needs without breaking the bank.
From
Performance Steering Product
replacements to
Performance Exhaust Products
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 1967 Jeep J-2500 at great prices.
Our Performance and Racing Products inventory for this model
ranges from just $8.29 to $949.99, with
an average price of $339.93.
Our 23 Performance and Racing Products in stock come from 8 trusted brands, so you’re sure to find the right part for your 1967 Jeep J-2500 without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1967 Jeep J-2500, we stock popular OEM and aftermarket Performance and Racing Products from top names
like Omix, Holley, B & M, and more.
Omix Performance and Racing Products
start at just $8.29 and boast an impressive 4.3 stars average rating from customers.
Holley and B & M also bring quality to the table, with Performance and Racing Products available starting at $373.99, and at an average 4.1 stars rating.
With 60 customer reviews and counting, our 1967 Jeep J-2500 Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Batteries and Chargers, Fluids and Chemicals
and more to make sure your 1967 Jeep J-2500 is always ready to roll. We’re committed to providing you with everything you need to keep your J-2500 in top shape, all in one place.
Start shopping confidently below for your 1967 Jeep J-2500!
Best-Selling Performance Steering Products for 1967 Jeep J-2500s
Enhance the driving experience in your Jeep with 2 quality Performance Steering Product components, starting at $26.49.
Rancho – Steering Damper Kit (Part No.RS97355)
from
$119.99
Designed to reduce wheel shimmy and end vibration caused by larger tires, the Rancho steering stabilizer kit cuts down on steering arm fatigue to improve handling. The kit includes one Rancho RS5000 steering stabilizer and installation brackets.
Product Features:
See More
Product Features:
- COMPATIBILITY – Designed for a variety of trucks and SUVs from Chevrolet, GMC, Ford, Dodge, Jeep, Plymouth and International
- IMPROVED HANDLING AND PERFORMANCE – Reduces wheel shimmy, bump steer and vibration which helps minimize on-road or off-road driver fatigue
- ACCOMMODATES LARGER TIRES – Engineered for vehicles with oversized wheels and tires.
- ENGINEERED TO LAST – Features protective boot to shield shock rod and oil seal and 0.25-in. high-strength, low-alloy steel bracket construction for long life
- EASY TO INSTALL – Includes one Rancho RS5000 steering stabilizer and brackets that bolt directly to factory steering linkage with included mounting hardware, no modifications needed
- EASY TO INSTALL – Includes one Rancho RS5000 steering stabilizer and brackets that bolt directly to factory steering linkage with included mounting hardware, no modifications needed
- RESISTS CORROSION – Durable black powder-coated and/or zinc-plated brackets resist rust and corrosion
- PRECISION DESIGN – Brackets are CNC cut and bent to exact specifications for a perfect fit
- BUY WITH CONFIDENCE – Comes with Rancho’s limited warranty
Omix – Tie Rod End Tube (Part No.18046.03)
from
$26.49
Is your Jeep’s steering loose? Are your tires wearing in an uneven pattern? Chances are that some of your steering components are worn. Fixing them is cheaper than replacing your tires and it’s a whole lot safer too.
Product Features:
See More
Product Features:
- Steel
- OE Style
- Direct Fit
Most Popular 1967 Jeep J-2500 Performance Exhaust Products
Customize your Jeep with 1 Performance Exhaust Products products
like Performance Exhaust Manifold Gaskets, all
priced under $19.49.
Omix – Exhaust Manifold Gasket Set; 72-80 Jeep CJ Models (Part No.17451.03)
from
$19.49
Are you smelling exhaust in your Jeep? Can you hear an exhaust leak? If so, it’s time to replace the exhaust manifold gasket. Omix-ADA offers high quality exhaust manifold gaskets to solve the problem.
Product Features:
See More
Product Features:
- Fiber
- Heat Resistant
- OE Style
- Direct Fit
Top Picks for 1967 Jeep J-2500 Performance Fuel Systems
Upgrade Jeep J-2500s with top-quality Performance Fuel Systems parts, including 4 OEM and aftermarket selections for your 1967 model.
Holley – Street Carburetor: 600 CFM, Electric Choke, 4 Barrel, Square Bore, Single Inlet, Shiny (Part No.0-80457S)
from
$499.99
Holley’s new 0-80457SA is constructed from aluminum which compared to its zinc counterpart equates to a weight savings of 40%! Holley’s aluminum 0-80457SA will hold its shine longer and also can be hand polished for a custom look! Its 600 CFM of airflow,
Product Features:
See More
Product Features:
- Vibratory Polished For Good Looks
Holley – Street Carburetor: 670 CFM, Electric Choke, 4 Barrel, Square Bore, Dual Inlet, Shiny (Part No.0-80670)
from
$682.99
Square flange bolt pattern. Performance calibrated. The ultimate vacuum secondary street performance upgrade.
Product Features:
See More
Product Features:
- Vibratory Polished For Good Looks
- Optimized Street Calibration That Works Out Of The Box
- Factory Preset Electric Choke For Easy Startups
- Quick Change Vacuum Housing Cap To Tune For Performance/Fuel Econ
- No Unnecessary Trips Back To The Parts Store
- Limited Lifetime Warranty
- 100% Wet Flow Tested By Holley Technicians
- Arrives Ready To Run
Holley – Prem Street Carbs (Avengers) (Part No.0-80870)
from
$699.99
Square flange bolt pattern. Performance calibrated. The ultimate vacuum secondary street performance upgrade.
Product Features:
See More
Product Features:
- Vibratory Polished For Good Looks
- Optimized Street Calibration That Works Out Of The Box
- Factory Preset Electric Choke For Easy Startups
- Quick Change Vacuum Housing Cap To Tune For Performance/Fuel Econ
- No Unnecessary Trips Back To The Parts Store
- Limited Lifetime Warranty
- 100% Wet Flow Tested By Holley Technicians
- Arrives Ready To Run
Holley – Prem Street Carbs (Avengers) (Part No.0-80570)
from
$699.99
Square flange bolt pattern. Performance calibrated. The ultimate vacuum secondary street performance upgrade.
Product Features:
See More
Product Features:
- Vibratory Polished For Good Looks
- Optimized Street Calibration That Works Out Of The Box
- Factory Preset Electric Choke For Easy Startups
- Quick Change Vacuum Housing Cap To Tune For Performance/Fuel Econ
- No Unnecessary Trips Back To The Parts Store
- Limited Lifetime Warranty
- 100% Wet-Flow Tested To Assure It Arrives Ready To Run
- Street Ready; Out Of The Box
In-Demand Performance Ignition Products for 1967 Jeep J-2500s
Select from 1 premium Performance Ignition Products parts for your 1967 Jeep J-2500.
Accel – Supercoil (Part No.140001)
from
$114.99
Engineered for faster rise time, longer spark duration and increased performance. Unique design with premium grade wire, special low resistance, high turns ratio windings. Produces higher spark energy with breakerless electronic ignition systems. For points application the supplied 0.85 ohm ballast resistor must be used in conjunction with the vehicle original ballast resistor, if so equipped. Oversized molded case with integral cooling fins and high capacity oil filled construction provide high thermal conductivity ensuring cool operation and long life. Extra tall tan Alkyd tower and integral voltage dam eliminate “flashover” to primary terminals. Comes complete with mounting hardware and 0.85 ohm ballast resistor. Effective up to 6,500 RPM.
Product Features:
See More
Product Features:
- Oil Filled For Better Cooling
- Optimized Low Resistance
- Silicon Magnetic Steel E-Core
- Higher Energy/Voltage Outputs
- Quicker Starts
- Improved Idle Quality
- Resists Shock And Vibration
- Resists Corrosion
Most Sold 1967 Jeep J-2500 Performance Engines
Explore our best-selling Jeep parts for the 1967 J-2500 among 10 OEM and aftermarket options starting from $8.29.
B & M – Tork Master 2400 (Part No.20404)
from
$373.99
Torque Converter – Tork Master 2400 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) APPLICATION: Tork Master 2400 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) The Tork Master is B&M’s lowest cost performance torque converter. The Tork Master is an excellent all-around performance street converter. The best value priced street converters available, Tork Master converters come with a new precision pump drive tube and all are pressure tested and fully balanced. The Tork Master torque converter is not recommended for big block or supercharged applications. New alloy steel pump drive tube. Needle thrust bearing when factory equipped. New thrust washer between turbine and cover when required. Due to torque converter core availability, the actual converter size may vary but performance functionality will be as advertised.
Product Features:
See More
Product Features:
- New Precision Pump Drive Tube
- Pressure Tested
- Fully Balanced
- Needle Thrust Bearing
- New Thrust Washer
Omix – Thermostat 180 Degree; 41-71 Willys/Jeep Models (Part No.17106.02)
from
$8.29
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA.
Product Features:
See More
Product Features:
- OE Style
- Direct Fit
- Steel
- Better Flow Control
B & M – Performance Torque Converter for GM TH400, 350, & 375 Transmissions (Part No.20400)
from
$329.99
Torque Converter – Tork Master 2000 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) APPLICATION: Tork Master 2000 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) The Tork Master is B&M’s lowest cost
Product Features:
See More
Product Features:
- New Precision Pump Drive Tube
- Pressure Tested
- Fully Balanced
- Needle Thrust Bearing
- New Thrust Washer
B & M – Holeshot 3600 (Part No.20425)
from
$949.99
HoleShot 3600 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) APPLICATION: HoleShot 3600 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) A higher than stock stall speed as delivered by the Holeshot converter will provide several advantages and benefits in vehicles with modified engines. Many modifications, particularly big cams, tend to reduce low end power and torque. The high stall converter allows the engine to launch the car at higher rpm where more torque is available. The Holeshot is generally a very good choice for the typical street machine that is looking for better launch capability and more strength. Street rods with modified engines will also benefit from a Holeshot converter. If your vehicle is equipped with a plate type nitrous system, you will need a Nitrous Holeshot!! Stall speed listings are based on engines producing 230lb. ft. of torque at 2,500 rpm. More torque at 2,500 rpm will give you more stall speed, less torque at 2,500 rpm will give you less stall speed than the stall speed ratings indicated. Furnace brazed impeller. New precision steel alloy pump drive tube. New heavy duty needle bearing between stator and impeller (not a thrust washer). Needle bearing between stator and turbine. Furnace brazed turbine. Dual pattern drive lugs on some GM Holeshots. New turbine hub. New springs and rollers in stator.
Product Features:
See More
Product Features:
- Furnace Brazed Impeller
- Steel Alloy Pump Drive Tube
- Heavy Duty Needle Bearing
- Between Stator and Turbine
- Furnace Brazed Turbine
- Dual Pattern Drive Lugs
- New Turbine Hub
- New Springs/Rollers In Stator
B & M – Holeshot 3000 (Part No.20413)
from
$899.99
HoleShot 3000 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) APPLICATION: HoleShot 3000 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) A higher than stock stall speed as delivered by the Holeshot c
Product Features:
See More
Product Features:
- Furnace Brazed Impeller
- Steel Alloy Pump Drive Tube
- Heavy Duty Needle Bearing
- Between Stator and Turbine
- Furnace Brazed Turbine
B & M – Torque Converter, Nitrous Holeshot 3000 (Part No.20481)
from
$899.99
Nitrous Holeshot Converters are Built with the same features as the other B&M Holeshots, with the addition of anti-balloon plates. The anti-balloon plates will allow these converters to stand up to the instant horsepower nitrous delivers.
Product Features:
See More
Product Features:
- 2800-3200 RPM
- Small And Big Blocks
- Serious Performance
- Furnace Brazed
- Fully Balanced
B & M – Torque Converter, Nitrous Holeshot 3600 (Part No.20482)
from
$749.99
Nitrous Holeshot Converters are Built with the same features as the other B&M Holeshots, with the addition of anti-balloon plates. The anti-balloon plates will allow these converters to stand up to the instant horsepower nitrous delivers.
Product Features:
See More
Product Features:
- 3400-3800 RPM
- Small And Big Blocks
- Serious Performance
- Furnace Brazed
- Fully Balanced
B & M – Holeshot 2400 (Part No.20412)
from
$549.99
HoleShot 2400 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) Application: HoleShot 2400 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) A higher than stock stall speed as delivered by the Holeshot c
Product Features:
See More
Product Features:
- Furnace Brazed Impeller
- Steel Alloy Pump Drive Tube
- Heavy Duty Needle Bearing
- Between Stator and Turbine
- Furnace Brazed Turbine
Omix – Camshaft (Part No.17421.07)
from
$175.99
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.
Product Features:
See More
Product Features:
- Made To OE Spec
- Direct Fit
- Limited 5 Year Warranty
Omix – Valve Cover Gasket; 6 Cylinder; 65-80 Jeep CJ/SJ (Part No.17447.02)
from
$13.29
Is your Jeep’s valve cover gasket leaking? Or, are you rebuilding an engine and need a fresh gasket? Omix-ADA offers high-quality replacement gaskets that will give you years of service and get you back on the road.
Product Features:
See More
Product Features:
- Cork
- OE Style
- Direct Fit
Top-Rated Performance and Racing Products Brands For Your 1967 Jeep J-2500
Shop for the best-rated brands offering Performance and Racing Products and other products for your 1967 Jeep J-2500s. Below you’ll find some of our best rated Performance and Racing Products from Omix, Holley, and B & M, and more. Performance and Racing Products from these brands that fit a 1967 J-2500 start at just $8.29 and are rated as high as 4.3 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.
Popular Omix 1967 Jeep J-2500 Performance and Racing Products
When it comes to maintaining or upgrading your 1967 Jeep J-2500, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. Omix ticks all of those boxes. We offer a wide selection of Omix Performance and Racing Products, specifically designed for the 1967 Jeep J-2500. With over 1 Omix brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $8.29. Plus, with over 2 customer reviews and an average rating of 4.3 stars, you can trust that our Omix Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$8.29
(2)
Thermostat 180 Degree; 41-71 Willys/Jeep Models
“Product is great. Installing next weekend to my jeep”
Popular Holley 1967 Jeep J-2500 Performance and Racing Products
Holley auto parts is one of the highest quality Performance and Racing Product brands in the market. Any 1967 Jeep J-2500 owner should feel confident when installing genuine Holley parts in their vehicle. To ensure the best fit and performance for your 1967 J-2500, Advance Auto Parts carries a full inventory of 2 Holley Performance and Racing Products. Plus you will be keeping your Jeep in peak condition while saving money because prices on these Holley Performance and Racing Products range from $499.99 to $682.99, plus, with more than 51 customer reviews and an impressive 4.1 stars average rating, you can be confident the Fram Performance and Racing Products below will deliver on both quality and value.
from
$499.99
(45)
Street Carburetor: 600 CFM, Electric Choke, 4 Barrel, Square Bore, Single Inlet, Shiny
“very easy to install…replaced older carb this one is fresh and runs smooth … needed to do minor ajustment .. but nothing anyone couldn’t do …”
from
$682.99
(6)
Street Carburetor: 670 CFM, Electric Choke, 4 Barrel, Square Bore, Dual Inlet, Shiny
“great carb”
FAQs for 1967 Jeep J-2500 Performance and Racing Products
Which Performance and Racing Products are best-sellers for 1967 Jeep J-2500s?
Out of 23 Performance and Racing Products that fit 1967 Jeep J-2500s, the following parts are the top sellers:
- Supercoil (5024250) – $114.99
- Thermocap Radiator Cap (10648773) – $54.99
- Trans Mount: Urethane-Chevy (22901287) – $97.99
What’s the price range for 1967 Jeep J-2500 Performance and Racing Products?
Performance and Racing Product prices for the 1967 Jeep J-2500 start at $8.29 and go up to $949.99 for the most premium parts.
What’s the average price of a Performance and Racing Product for a 1967 Jeep J-2500?
The average price for Performance and Racing Products for the 1967 Jeep J-2500 is $339.93. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Performance and Racing Products for other Jeep J-2500 model years?
What are the cheapest Performance and Racing Products for my 1967 Jeep J-2500?
The cheapest 1967 Jeep J-2500 Performance and Racing Products we carry in stock are:
- Thermostat 180 Degree; 41-71 Willys/Jeep Models (10186688) – $8.29
- Valve Cover Gasket; 6 Cylinder; 65-80 Jeep CJ/SJ (10181332) – $13.29
- Exhaust Manifold Gasket Set; 72-80 Jeep CJ Models (10178924) – $19.49
- Tie Rod End Tube (10945548) – $26.49
- Driveshaft U-Joint; 1310 Spicer (10176991) – $38.49
What types of Performance and Racing Products do you sell for my 1967 Jeep J-2500?
As of 11/2/25, these are some of the most in-demand types of Performance and Racing Products for a 1967 Jeep J-2500:
Can I get help with 1967 Jeep J-2500 Performance and Racing Product orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Jeep Performance and Racing Products and more.
What is your return policy for Jeep J-2500 Performance and Racing Products?
Advance Auto Parts keeps returns simple. For new Jeep J-2500 Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
