1967 International Scout Performance and Racing Products
Find Your Specific 1967 International Scout Performance and Racing Products
Below you will find various in-demand International Performance and Racing Products, components and accessories for your 1967 Scout. Advance Auto Parts has popular Scout parts like Performance Engines, Performance Ignition Products, Performance Drivetrains and more. You’ll also find aftermarket and OEM Performance and Racing Products for other Scout model years including
1962,
1963,
1964,
1965,
1966,
1968,
1969,
1970,
1971 and more. Select a category of 1967 International Scout Performance and Racing Products below and start saving instantly.
Popular 1967 International Scout Performance and Racing Products Categories
Essential Performance and Racing Products for 1967 International Scouts
Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)
from
$204.99
Universal street and strip. For street-driven vehicles with breaker point ignition or OE electronic ignition. Delivers optimum performance when used with these Mallory ignition products: UNILITE (R) distributor with a HYFIRE (R) capacitive discharge ignition, magnetic breaker less distributor with a HYFIRE (R) capacitive discharge ignition, or dual point distributor. Effective to approximately 6500 RPM when used with a point type distributor (depending on engine combination). Effective to approximately 8000 RPM when used with a Mallory HYFIRE electronic ignition control (depending on engine combination).
Product Features:
See More
Product Features:
- Glass Filled Polyester Case
- Longer Spark Duration
- Increased Performance
- No Energy Loss Due To Arcing
- Includes Brass Contact Terminal
Mallory – Unilite Ignition Module (Part No.605)
from
$95.99
Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.
Product Features:
See More
Product Features:
- Service Part
- No Moving Parts To Wear Out
- Self Contained Unit
- Can Drive OEM
- Can Drive High Performance Ignition Coils
Mallory – Distributor Wiring Harness (Part No.29349)
Accel – Contact Set Hp 32 Oz (Part No.110128)
from
$60.99
Heavy duty points sets are quipped with extra think contack arms to prevent flexing at high RPMS. Large radiused tungsten contants provide crisp circuit breaking for peak coil output. High strength phenolic rubbing blocks provide superior durability when used with heavy duty spring tension.
Product Features:
See More
Product Features:
- Extra Thick Contact Arms
- Large Radius Tungsten Contacts
- High Strength Phenolic Rubbing Blocks
- Prevents Points Float
- Moisture-Proof Buna-N Condenser
Powertrax – Lock Right Locker (Part No.2413-LR)
from
$442.99
The Powertrax Lock-Right ultra-strength alloy locker’s straight-line performance is equal to a solid spool, but automatically unlocks in turns. Best suited for extreme off-road to severe on-road use, Powertrax Lock Right lockers replace the spider gears in your open differential carrier using basic tools and without affecting your ring and pinion settings. The whole job can be done in your driveway in a couple of hours, pin included! Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles. Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction. Powertrax® = Extreme Traction Systems!
See More
Edelbrock – Side-Mount Throttle Linkage for B/B Chevy #7075 Victor 2-R Manifold (Part No.7077)
from
$236.99
Product Features:
See More
- Steel Material
- Sideways Orientation
- Adjustable
- 2-Barrel Configuration
- Made In The USA
Edelbrock – Torker II 2-O Big Block Chevy Intake Manifold (Part No.5061)
from
$454.99
use Performer 2-O #2161.
Product Features:
See More
Product Features:
- 2500 to 6500 RPM High Performance Street Engines
- Single-Plane Low-Rise Intake Good for High RPM
- Ideal for Applications with Limited Hood Clearance
- For Top-End HP and Adequate Throttle Response
- Not for Mileage or Emissions Applications
- Use with Large Oval Port Heads (1975 and Earlier)
- Will fit Under Corvette Hood Without Modifications
- Not For Tall Block V8 Engines
Edelbrock – Street Tunnel Ram Big Block Chevy 2-O Intake Manifold (Part No.7115)
from
$838.99
For 3500 to 7500 PRM. Use where low-end torque is not a prime factor. Great for engines with slightly modified heads. HEI ignition will not clear manifold. Street machines, street rods, pro-street and marine.
Product Features:
See More
Product Features:
- For 3500 to 7500 RPM
- Use Where Low-End Torque is Not a Prime Factor
- Great For Engines w/Slightly Modified Heads
- Top Has Vacuum Outlet for Power Brakes
- Will Accept Forward and Sideways Mounted Carbs
- Carburetor Center-to-Center Dimensions 9.38 in
- HEI Ignition Will Not Clear Manifold
- Street Machines; Street Rods; Pro-Street; Marine
Edelbrock – Intake Manifold replacement top gasket (Part No.6989)
from
$20.99
Replacement gasket for Edelbrock tunnel ram intake. Use with intake PN(7115). Base PN(7190). Top PN(7191). One gasket only.
Product Features:
See More
Product Features:
- Replacement Gasket for Edelbrock Tunnel Ram Intake
- Use w/Intake PN[7115]/Base PN[7190]/Top PN[7191]
- One Gasket Only
Edelbrock – Carb Adapter #2694 Mounts 4150 Holley Carb Sideways On Tunnel Ram 0.55 in-Pair (Part No.2694)
from
$87.99Product Features:
- Mounts Standard Flange Holley Carbs Sideways
- Use on Tunnel Rams
- 0.550 in. Thick
Upgrade your 1967 International Scout with Top-Quality Performance and Racing Products
When it comes to maintaining or upgrading your 1967 International Scout, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your International or enhancing its overall performance, Performance and Racing Products are key to keeping your Scout functioning at its best. At Advance Auto Parts, we offer a wide selection of 10 Performance and Racing Products for the 1967 International Scout, designed to meet your needs without breaking the bank.
From
Performance Engine
replacements to
Performance Ignition Products
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 1967 International Scout at great prices.
Our Performance and Racing Products inventory for this model
ranges from just $20.99 to $838.99, with
an average price of $248.49.
Our 10 Performance and Racing Products in stock come from 4 trusted brands, so you’re sure to find the right part for your 1967 International Scout without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1967 International Scout, we stock popular OEM and aftermarket Performance and Racing Products from top names
like Mallory, and more.
Mallory Performance and Racing Products
start at just $95.99 and boast an impressive 4.9 stars average rating from customers.
With 6 customer reviews and counting, our 1967 International Scout Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 1967 International Scout is always ready to roll. We’re committed to providing you with everything you need to keep your Scout in top shape, all in one place.
Start shopping confidently below for your 1967 International Scout!
Best-Selling Performance Engines for 1967 International Scouts
Enhance the driving experience in your International with 5 quality Performance Engine components, starting at $20.99.
Edelbrock – Street Tunnel Ram Big Block Chevy 2-O Intake Manifold (Part No.7115)
from
$838.99
For 3500 to 7500 PRM. Use where low-end torque is not a prime factor. Great for engines with slightly modified heads. HEI ignition will not clear manifold. Street machines, street rods, pro-street and marine.
Product Features:
See More
Product Features:
- For 3500 to 7500 RPM
- Use Where Low-End Torque is Not a Prime Factor
- Great For Engines w/Slightly Modified Heads
- Top Has Vacuum Outlet for Power Brakes
- Will Accept Forward and Sideways Mounted Carbs
- Carburetor Center-to-Center Dimensions 9.38 in
- HEI Ignition Will Not Clear Manifold
- Street Machines; Street Rods; Pro-Street; Marine
Edelbrock – Torker II 2-O Big Block Chevy Intake Manifold (Part No.5061)
from
$454.99
use Performer 2-O #2161.
Product Features:
See More
Product Features:
- 2500 to 6500 RPM High Performance Street Engines
- Single-Plane Low-Rise Intake Good for High RPM
- Ideal for Applications with Limited Hood Clearance
- For Top-End HP and Adequate Throttle Response
- Not for Mileage or Emissions Applications
- Use with Large Oval Port Heads (1975 and Earlier)
- Will fit Under Corvette Hood Without Modifications
- Not For Tall Block V8 Engines
Edelbrock – Side-Mount Throttle Linkage for B/B Chevy #7075 Victor 2-R Manifold (Part No.7077)
from
$236.99
Product Features:
See More
- Steel Material
- Sideways Orientation
- Adjustable
- 2-Barrel Configuration
- Made In The USA
Edelbrock – Carb Adapter #2694 Mounts 4150 Holley Carb Sideways On Tunnel Ram 0.55 in-Pair (Part No.2694)
from
$87.99Product Features:
- Mounts Standard Flange Holley Carbs Sideways
- Use on Tunnel Rams
- 0.550 in. Thick
Edelbrock – Intake Manifold replacement top gasket (Part No.6989)
from
$20.99
Replacement gasket for Edelbrock tunnel ram intake. Use with intake PN(7115). Base PN(7190). Top PN(7191). One gasket only.
Product Features:
See More
Product Features:
- Replacement Gasket for Edelbrock Tunnel Ram Intake
- Use w/Intake PN[7115]/Base PN[7190]/Top PN[7191]
- One Gasket Only
Most Popular 1967 International Scout Performance Ignition Products
Customize your International with 4 Performance Ignition Products products
like Performance Coils,
Performance Points and Condensers, and
Performance Ignition Parts, all
priced under $204.99.
Mallory – Unilite Ignition Module (Part No.605)
from
$95.99
Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.
Product Features:
See More
Product Features:
- Service Part
- No Moving Parts To Wear Out
- Self Contained Unit
- Can Drive OEM
- Can Drive High Performance Ignition Coils
Accel – Contact Set Hp 32 Oz (Part No.110128)
from
$60.99
Heavy duty points sets are quipped with extra think contack arms to prevent flexing at high RPMS. Large radiused tungsten contants provide crisp circuit breaking for peak coil output. High strength phenolic rubbing blocks provide superior durability when used with heavy duty spring tension.
Product Features:
See More
Product Features:
- Extra Thick Contact Arms
- Large Radius Tungsten Contacts
- High Strength Phenolic Rubbing Blocks
- Prevents Points Float
- Moisture-Proof Buna-N Condenser
Mallory – Distributor Wiring Harness (Part No.29349)
Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)
from
$204.99
Universal street and strip. For street-driven vehicles with breaker point ignition or OE electronic ignition. Delivers optimum performance when used with these Mallory ignition products: UNILITE (R) distributor with a HYFIRE (R) capacitive discharge ignition, magnetic breaker less distributor with a HYFIRE (R) capacitive discharge ignition, or dual point distributor. Effective to approximately 6500 RPM when used with a point type distributor (depending on engine combination). Effective to approximately 8000 RPM when used with a Mallory HYFIRE electronic ignition control (depending on engine combination).
Product Features:
See More
Product Features:
- Glass Filled Polyester Case
- Longer Spark Duration
- Increased Performance
- No Energy Loss Due To Arcing
- Includes Brass Contact Terminal
Top Picks for 1967 International Scout Performance Drivetrains
Upgrade International Scouts with top-quality Performance Drivetrains parts, including 1 OEM and aftermarket selections for your 1967 model.
Powertrax – Lock Right Locker (Part No.2413-LR)
from
$442.99
The Powertrax Lock-Right ultra-strength alloy locker’s straight-line performance is equal to a solid spool, but automatically unlocks in turns. Best suited for extreme off-road to severe on-road use, Powertrax Lock Right lockers replace the spider gears in your open differential carrier using basic tools and without affecting your ring and pinion settings. The whole job can be done in your driveway in a couple of hours, pin included! Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles.Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction.Powertrax® = Extreme Traction Systems!
See More
Top-Rated Performance and Racing Products Brands For Your 1967 International Scout
Shop for the best-rated brands offering Performance and Racing Products and other products for your 1967 International Scouts. Below you’ll find some of our best rated Performance and Racing Products from Mallory, and more. Performance and Racing Products from these brands that fit a 1967 Scout start at just $95.99 and are rated as high as 4.9 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.
Popular Mallory 1967 International Scout Performance and Racing Products
When it comes to maintaining or upgrading your 1967 International Scout, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. Mallory ticks all of those boxes. We offer a wide selection of Mallory Performance and Racing Products, specifically designed for the 1967 International Scout. With over 1 Mallory brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $95.99. Plus, with over 3 customer reviews and an average rating of 4.9 stars, you can trust that our Mallory Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$95.99
(3)
Unilite Ignition Module
“I like the Unilite product because it is so small and compact compared to the HEI stuff I normally use. If you are restricted on space Its a great pro”
FAQs for 1967 International Scout Performance and Racing Products
Which Performance and Racing Products are best-sellers for 1967 International Scouts?
Out of 10 Performance and Racing Products that fit 1967 International Scouts, the following parts are the top sellers:
- Contact Set Hp 32 Oz (17370023) – $60.99
- Distributor Wiring Harness (17350080) – $34.49
- Torker II 2-O Big Block Chevy Intake Manifold (5027233) – $454.99
What’s the price range for 1967 International Scout Performance and Racing Products?
Performance and Racing Product prices for the 1967 International Scout start at $20.99 and go up to $838.99 for the most premium parts.
What’s the average price of a Performance and Racing Product for a 1967 International Scout?
The average price for Performance and Racing Products for the 1967 International Scout is $248.49. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Performance and Racing Products for other International Scout model years?
What are the cheapest Performance and Racing Products for my 1967 International Scout?
The cheapest 1967 International Scout Performance and Racing Products we carry in stock are:
- Intake Manifold replacement top gasket (22341099) – $20.99
- Distributor Wiring Harness (17350080) – $34.49
- Contact Set Hp 32 Oz (17370023) – $60.99
- Carb Adapter #2694 Mounts 4150 Holley Carb Sideways On Tunnel Ram 0.55 in-Pair (22340996) – $87.99
- Unilite Ignition Module (17350025) – $95.99
What are the top-rated Performance and Racing Products that fit the 1967 International Scout?
Out of 6 reviews by customers, our 1967 International Scout Performance and Racing Products have an average customer rating of . These are some of the highest-rated Performance and Racing Product types for the 1967 International Scout and their top-rated products:
- Performance Ignition Products
- Unilite Ignition Module (17350025) – $95.99
What types of Performance and Racing Products do you sell for my 1967 International Scout?
As of 3/1/26, these are some of the most in-demand types of Performance and Racing Products for a 1967 International Scout:
Can I get help with 1967 International Scout Performance and Racing Product orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about International Performance and Racing Products and more.
What is your return policy for International Scout Performance and Racing Products?
Advance Auto Parts keeps returns simple. For new International Scout Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
