1967 Gordon-Keeble IT Fuel and Emissions Systems
Find Your Specific 1967 Gordon-Keeble IT Fuel and Emissions Systems
Below you will find various in-demand Gordon-Keeble Fuel and Emissions Systems, components and accessories for your 1967 IT. Advance Auto Parts has popular IT parts like Fuel Tanks, Exhaust Gas Recirculation (EGR) Parts, Fuel Rails and more. You’ll also find aftermarket and OEM Fuel and Emissions Systems for other IT model years including
1964,
1965,
1966 and more. Select a category of 1967 Gordon-Keeble IT Fuel and Emissions Systems below and start saving instantly.
Popular 1967 Gordon-Keeble IT Fuel and Emissions Systems Categories
Essential Fuel and Emissions Systems for 1967 Gordon-Keeble ITs
Edelbrock – Fuel Injection Fuel Rail #3627, -6 AN Black Anodized For Chevrolet Small-Block (Part No.3627)
from
$211.99
All Edelbrock fuel rails are machined from high quality extruded aluminum. Each kit includes fuel rails, stands and mounting hardware. Fuel fittings, crossover line and regulator not included. 3627 Small-Block Chevy fuel rail kit is for use with Pro-Flo X
Product Features:
See More
Product Features:
- Black AnodizedFinish
- High Capacity Fuel Rails
- For Use W/ Pro-Flo XT Manifold #7137
- -6 AN Inlet / Outlet
- Made In The USA
Delphi – Fuel Tank Cleaning Kit (Part No.FC01)
from
$12.49
When replacing a fuel pump or module, it’s extremely important to clean the tank. Existing dirt, debris, and contamination stuck in the fuel tank can clog the brand-new strainer. Delphi’s Fuel Tank Cleaning Kit (FC01) and Tool (FC02) can help clean your fuel tank in less than five minutes. The FC01 includes a low-suds solution, cloth, and gloves that works together with the FC02 to help clean those hard to reach places without having to remove the fuel tank. Visit our Resource Center for helpful tips and tricks on fuel pumps, technologies, and more: https://www.delphiautoparts.com/usa/en-US/resource-center.
Product Features:
See More
Product Features:
- Helps avoid premature fuel pump failure
- Lint free towel included
- Low suds formulation
- Removes harmful contaminants from the fuel tank
Edelbrock – EGR Valve Adapter #1476 For Intake Manifold #3701 And #3706 (Part No.1476)
Mr. Gasket – High Performance Electric Fuel Pump – Universal Carbureted Engines (Part No.42S)
from
$56.99
Gravity fed type pump with simple two-wire design. Works on 12 Volt negative ground systems only. Includes fittings and mounting hardware along with easy to follow DIY instructions. Pumps require approximately one amp average draw at maximum delivery. Flow rate is 28 gallons per hour (GPH) at 2 to 3-1/2 pounds per square inch (PSI). Universal design for most import 4 & 6-cylinder carburetor applications. Please see part #12S for V8 gasoline applications, part #12D for diesel applications or part #12E for Ethanol, Methanol, E85 and Race Fuel applications. Solid-state worry free electronics. Eliminates vapor lock and flooding. Works well as a fuel transfer, booster, or stand-alone pump. Not recommended for diesel, methanol, ethanol, E85 or race fuel applications!!
Product Features:
See More
Product Features:
- Solid-state Worry Free Electronics
- Internal Pressure Regulating
- Universal Design Allows For Easy Installation
- No DiaphraGMs Or Mechanical Parts To Wear Out
- Makes An Excellent Fuel Transfer or Booster Pump
- Hose Barbs Fit 5/16″ Fuel Hose
- Self-priming, 2 wire design
- Eliminates vapor lock and flooding
Edelbrock – Mechanical Fuel Pump Block-Off Plates for Big-Block Chevy (Part No.4020)
from
$34.99
Edelbrock part #4020 is a mechanical fuel pump block off plate for small-block Chevy applications. It is a billet aluminum part with counter sunk bolt holes.
Product Features:
See More
Product Features:
- Black Anodized Finish
- Billet Aluminum Material
- Mounting Hardware Included
- Includes 1.5 mm Gasket
- For Small-Block Chevy
Upgrade your 1967 Gordon-Keeble IT with Top-Quality Fuel and Emissions Systems
When it comes to maintaining or upgrading your 1967 Gordon-Keeble IT, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Gordon-Keeble or enhancing its overall performance, Fuel and Emissions Systems are key to keeping your IT functioning at its best. At Advance Auto Parts, we offer a wide selection of 5 Fuel and Emissions Systems for the 1967 Gordon-Keeble IT, designed to meet your needs without breaking the bank.
From
Fuel Tank
replacements to
Exhaust Gas Recirculation (EGR) Parts
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Fuel and Emissions Systems for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Fuel and Emissions Systems for your 1967 Gordon-Keeble IT at great prices.
Our Fuel and Emissions Systems inventory for this model
ranges from just $12.49 to $211.99, with
an average price of $80.09.
Our 5 Fuel and Emissions Systems in stock come from 3 trusted brands, so you’re sure to find the right part for your 1967 Gordon-Keeble IT without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1967 Gordon-Keeble IT, we stock popular OEM and aftermarket Fuel and Emissions Systems from top names
like Mr. Gasket, and more.
Mr. Gasket Fuel and Emissions Systems
start at just $56.99 and boast an impressive 4 stars average rating from customers.
With 26 customer reviews and counting, our 1967 Gordon-Keeble IT Fuel and Emissions Systems have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Fuel and Emissions System upgrades. Explore related part types like Fluids and Chemicals, Ignition and Tune-Up Products
and more to make sure your 1967 Gordon-Keeble IT is always ready to roll. We’re committed to providing you with everything you need to keep your IT in top shape, all in one place.
Start shopping confidently below for your 1967 Gordon-Keeble IT!
Best-Selling Fuel Tanks for 1967 Gordon-Keeble ITs
Enhance the driving experience in your Gordon-Keeble with 1 quality Fuel Tank components, starting at $12.49.
Delphi – Fuel Tank Cleaning Kit (Part No.FC01)
from
$12.49
When replacing a fuel pump or module, it’s extremely important to clean the tank. Existing dirt, debris, and contamination stuck in the fuel tank can clog the brand-new strainer. Delphi’s Fuel Tank Cleaning Kit (FC01) and Tool (FC02) can help clean your fuel tank in less than five minutes. The FC01 includes a low-suds solution, cloth, and gloves that works together with the FC02 to help clean those hard to reach places without having to remove the fuel tank. Visit our Resource Center for helpful tips and tricks on fuel pumps, technologies, and more: https://www.delphiautoparts.com/usa/en-US/resource-center.
Product Features:
See More
Product Features:
- Helps avoid premature fuel pump failure
- Lint free towel included
- Low suds formulation
- Removes harmful contaminants from the fuel tank
Most Popular 1967 Gordon-Keeble IT Exhaust Gas Recirculation (EGR) Parts
Customize your Gordon-Keeble with 1 Exhaust Gas Recirculation (EGR) Parts products
like EGR Valve Adapters, all
priced under $83.99.
Edelbrock – EGR Valve Adapter #1476 For Intake Manifold #3701 And #3706 (Part No.1476)
Top Picks for 1967 Gordon-Keeble IT Fuel Rails
Upgrade Gordon-Keeble ITs with top-quality Fuel Rails parts, including 1 OEM and aftermarket selections for your 1967 model.
Edelbrock – Fuel Injection Fuel Rail #3627, -6 AN Black Anodized For Chevrolet Small-Block (Part No.3627)
from
$211.99
All Edelbrock fuel rails are machined from high quality extruded aluminum. Each kit includes fuel rails, stands and mounting hardware. Fuel fittings, crossover line and regulator not included. 3627 Small-Block Chevy fuel rail kit is for use with Pro-Flo X
Product Features:
See More
Product Features:
- Black AnodizedFinish
- High Capacity Fuel Rails
- For Use W/ Pro-Flo XT Manifold #7137
- -6 AN Inlet / Outlet
- Made In The USA
In-Demand Fuel Pumps for 1967 Gordon-Keeble ITs
Select from 2 premium Fuel Pumps parts for your 1967 Gordon-Keeble IT, with prices ranging from $34.99 to $56.99.
Mr. Gasket – High Performance Electric Fuel Pump – Universal Carbureted Engines (Part No.42S)
from
$56.99
Gravity fed type pump with simple two-wire design. Works on 12 Volt negative ground systems only. Includes fittings and mounting hardware along with easy to follow DIY instructions. Pumps require approximately one amp average draw at maximum delivery. Flow rate is 28 gallons per hour (GPH) at 2 to 3-1/2 pounds per square inch (PSI). Universal design for most import 4 & 6-cylinder carburetor applications. Please see part #12S for V8 gasoline applications, part #12D for diesel applications or part #12E for Ethanol, Methanol, E85 and Race Fuel applications. Solid-state worry free electronics. Eliminates vapor lock and flooding. Works well as a fuel transfer, booster, or stand-alone pump. Not recommended for diesel, methanol, ethanol, E85 or race fuel applications!!
Product Features:
See More
Product Features:
- Solid-state Worry Free Electronics
- Internal Pressure Regulating
- Universal Design Allows For Easy Installation
- No DiaphraGMs Or Mechanical Parts To Wear Out
- Makes An Excellent Fuel Transfer or Booster Pump
- Hose Barbs Fit 5/16″ Fuel Hose
- Self-priming, 2 wire design
- Eliminates vapor lock and flooding
Edelbrock – Mechanical Fuel Pump Block-Off Plates for Big-Block Chevy (Part No.4020)
from
$34.99
Edelbrock part #4020 is a mechanical fuel pump block off plate for small-block Chevy applications. It is a billet aluminum part with counter sunk bolt holes.
Product Features:
See More
Product Features:
- Black Anodized Finish
- Billet Aluminum Material
- Mounting Hardware Included
- Includes 1.5 mm Gasket
- For Small-Block Chevy
Top-Rated Fuel and Emissions Systems Brands For Your 1967 Gordon-Keeble IT
Shop for the best-rated brands offering Fuel and Emissions Systems and other products for your 1967 Gordon-Keeble ITs. Below you’ll find some of our best rated Fuel and Emissions Systems from Mr. Gasket, and more. Fuel and Emissions Systems from these brands that fit a 1967 IT start at just $56.99 and are rated as high as 4 stars. OEM and aftermarket Fuel and Emissions Systems don’t get more top quality, durable, and affordable than from the brands below.
Popular Mr. Gasket 1967 Gordon-Keeble IT Fuel and Emissions Systems
When it comes to maintaining or upgrading your 1967 Gordon-Keeble IT, using quality Fuel and Emissions Systems is essential to ensure durability and a perfect fit. Mr. Gasket ticks all of those boxes. We offer a wide selection of Mr. Gasket Fuel and Emissions Systems, specifically designed for the 1967 Gordon-Keeble IT. With over 1 Mr. Gasket brand Fuel and Emissions Systems in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $56.99. Plus, with over 26 customer reviews and an average rating of 4 stars, you can trust that our Mr. Gasket Fuel and Emissions Systems will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$56.99
$56.99
(26)
High Performance Electric Fuel Pump – Universal Carbureted Engines
“USED ON VW ENGINE FOR TRIKE”
FAQs for 1967 Gordon-Keeble IT Fuel and Emissions Systems
Which Fuel and Emissions Systems are best-sellers for 1967 Gordon-Keeble ITs?
Out of 5 Fuel and Emissions Systems that fit 1967 Gordon-Keeble ITs, the following parts are the top sellers:
- Fuel Tank Cleaning Kit (11692237) – $12.49
- EGR Valve Adapter #1476 For Intake Manifold #3701 And #3706 (6340091) – $83.99
- Mechanical Fuel Pump Block-Off Plates for Big-Block Chevy (12257407) – $34.99
What’s the price range for 1967 Gordon-Keeble IT Fuel and Emissions Systems?
Fuel and Emissions System prices for the 1967 Gordon-Keeble IT start at $12.49 and go up to $211.99 for the most premium parts.
What’s the average price of a Fuel and Emissions System for a 1967 Gordon-Keeble IT?
The average price for Fuel and Emissions Systems for the 1967 Gordon-Keeble IT is $80.09. Keep in mind the variety of part types within our Fuel and Emissions System category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Fuel and Emissions Systems for other Gordon-Keeble IT model years?
What are the cheapest Fuel and Emissions Systems for my 1967 Gordon-Keeble IT?
The cheapest 1967 Gordon-Keeble IT Fuel and Emissions Systems we carry in stock are:
- Fuel Tank Cleaning Kit (11692237) – $12.49
- Mechanical Fuel Pump Block-Off Plates for Big-Block Chevy (12257407) – $34.99
- High Performance Electric Fuel Pump – Universal Carbureted Engines (5400317) – $56.99
- EGR Valve Adapter #1476 For Intake Manifold #3701 And #3706 (6340091) – $83.99
- Fuel Injection Fuel Rail #3627, -6 AN Black Anodized For Chevrolet Small-Block (10490149) – $211.99
What types of Fuel and Emissions Systems do you sell for my 1967 Gordon-Keeble IT?
As of 2/5/25, these are some of the most in-demand types of Fuel and Emissions Systems for a 1967 Gordon-Keeble IT:
Can I get help with 1967 Gordon-Keeble IT Fuel and Emissions System orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Gordon-Keeble Fuel and Emissions Systems and more.
What is your return policy for Gordon-Keeble IT Fuel and Emissions Systems?
Advance Auto Parts keeps returns simple. For new Gordon-Keeble IT Fuel and Emissions Systems and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
